Used Leather Cleaning for sale (7,714)

Year of construction: 2019, condition: excellent (used), The system has always been used with ILSA-approved chemicals (modified alcohols). Fpjdpfxsykrfrj Agfof The installation, which loads two crates per wash cycle, can be operated automatically, managing up to five 'rollers' each carrying two crates, allowing the washing of up to 10 crates without the need for the continuous presence of an operator during loading. A stock of various types of crates for washing is available (both galvanized iron and stainless steel, with different hole patterns and dimensions, all suitable for use with the system), and these will be included in the supply of the washing installation.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, total length: 1,820 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 950 kg, input voltage: 400 V, input frequency: 50 Hz, load capacity: 100 kg, Equipment: documentation/manual, For sale: MAFAC Elba as a 2-bath cleaning system, year 2019, with approx. 2,500 cleaning cycles in very good condition. (Sale exclusively within Austria) Equipment: - Rotating warm air impulse blower - Stationary hot air drying system Fsdpfx Aswyc Sisgfopf - Main stream fine filtration MT 1 - Main stream fine filtration MT 2 - Variable speed control of basket rotation - Control cabinet with top lighting - Leveling kit - Timer - Safety grid MW 20 - Chemical dosing proportional to fresh water (2 units) - Suitable for Euro-standard baskets: 600 L x 400 W x 288 H mm

Condition: ready for operation (used), Max. air supply: 5bar, operational temperature: -10 to 50°C, max. connected load: 200W, with documentation. Fpedpfsiu H Itsx Agfef

Year of construction: 2009, condition: ready for operation (used), Floor area: 46.25m², air flow: 1000m³/h, relative humidity: 25-35%, length: 8500mm, width: 5000mm, height: 3341mm, with documentation. Fpedpfx Aopcgy Rsgfjf

Year of construction: 2014, condition: good (used), Melag Melatherm 10 DT Thermal Disinfector The Melag MelaTherm 10 DT is a washer-disinfector specifically designed for the automated reprocessing of instruments in medical and dental settings. It integrates essential functions such as active drying and media loading directly into the unit to save space in the practice. Melag Melatherm 10 DT Thermal Disinfector Fpedpfx Aoyk Eugogfjf The Melag MelaTherm 10 DT is a washer-disinfector specifically designed for the automated reprocessing of instruments in medical and dental practices. It integrates key functions such as active drying and media loading directly into the unit to save space in the practice. The Melag MelaTherm 10 DT is a thermal disinfector specifically designed for the automated reprocessing of instruments in medical and dental settings. It integrates important functions such as active drying and media loading directly into the unit to save space in the practice. Dimensions: The unit measures approximately 59.8 x 81.8 x 67.8 cm (W x H x D) and therefore fits under a standard 60 cm worktop. Capacity: The optimized reprocessing chamber offers space for instrument sets for up to 45 patients per batch. Active drying: Reliably protects instruments from corrosion and recontamination thanks to integrated external and internal drying. Integrated process media: Cleaner, neutralizer, and rinse aid are stored in a space-saving drawer directly within the unit. Manufacturer: Melag Type: Melatherm 10 DT Voltage: 230 V Year of manufacture: 2014 Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), functionality: fully functional, filter area: 590 m², volume flow: 70,000 m³/h, total width: 2,450 mm, total length: 9,600 mm, total height: 8,500 mm, compressed air connection: 6 bar, Equipment: documentation/manual, Self-cleaning baghouse filter Airflow capacity: 70,000 m³/h Fjdpfxexfb Nnj Agfopf Dimensions: 9600 x 2400 x H 8000 mm (approx.) Number of dust settling zones: 2 Total filter media surface: 590 m² Filter media: antistatic fabric Filter cleaning: reverse air pulse with control via control unit – sequencer Screw conveyor and rotary valve for discharge of filtered dust Electrical control panel Extraction fans – power to be defined in consultation with user Discharge fan for conveying filtered material into collection system

Year of construction: 2011, condition: ready for operation (used), A 2-tank spray/flood cleaning machine Mafac is available. Basket dimensions X/Y/Z: 660mm/480mm/338mm, max. batch weight: 100kg, spray pressure pump power: 7.5kW, spray cleaning directions: 5, basket batch flooding: 50%, filling volume: 830l, heating power: 30kW. Machine dimensions X/Y/Z: approx. 2200mm/1500mm/2050mm, weight: approx. 1400kg, control: Siemens Simatic S7-1500. Documentation available. On-site inspection is possible. Fedpfx Ajx I Rrgsgfopf

Year of construction: 1996, condition: ready for operation (used), Offered is a cleaning and degreasing system with steam extraction fan and oil skimmer, year of construction 1996, basket: Ø720mm, internal height: 140mm, workpiece: maximum usable height: 450mm, maximum batch weight: 500kg, overhaul: 2011: completely overhauled, renewed: gear motor, heater, gas spring and heating elements, documentation: operating manual, technical documentation and CE declaration of conformity available, overall dimensions X/Y/Z: 1190mm/1170mm/1170mm, weight: approx. 290kg. Inspection: possible by appointment. Fsdox Ect Iopfx Agfspf

Year of construction: 2016, condition: ready for operation (used), A GMS stencil cleaner for the PCB industry is available. Drip pan external dimensions X/Y/Z: approx. 1420mm/1150mm/50mm, max. cleaning tank volume: 65l, max. stencil dimensions X/Y/Z: 755mm/755mm/40mm, extraction nozzle diameter: 100mm, air volume flow: 200m³/h. Machine dimensions X/Y/Z: approx. 1400mm/750mm/1100mm, weight: approx. 140kg. Documentation available. An on-site inspection is possible. Fpsdpfxoxd Awdo Agfof

Year of construction: 2007, condition: ready for operation (used), A GM Gera bottle cleaning system is available. Throughput capacity with 1l PET bottles: 13000 bottles/h, bottle cells: 3240 pieces, cells per basket row: 18, cell pitch: 110mm, chain pitch: 169mm, total treatment time: approx. 15min, total immersion time: approx. 7.5min, housing material: stainless steel (SST). System dimensions X/Y/Z: approx. 8900mm/4200mm/3350mm, weight: approx. 23650kg, operating hours (09.2025): approx. 14300h. Documentation available. An on-site inspection is possible. Expected to be available from mid-March 2026. Fpsdpfx Aoxfbczogfsf

Condition: ready for operation (used), Year of construction: 2015, Connected load: 160kVA, length: 8328mm, width: 2768mm, height: 3665mm, weight: 9.5t, with documentation. Fedpfx Agelnmv Defjpf

Condition: ready for operation (used), Working width brush/suction nozzle: 660mm/850mm, fresh water tank capacity: 45L, waste water tank capacity: 45L, detergent tank capacity: 2.5L, battery capacity: 120Ah, battery runtime: 3.5h, charging time 80%/100%: 40min/60min, cleaning performance: 1250m²/h, cleaning speed: 0.6m/s, recommended working area: from 500m². Machine dimensions X/Y/Z: approx. 1000mm/850mm/900mm, weight: approx. 260kg. Documentation available. An on-site inspection is possible. Fodpfx Asxg Ri Tjgfopf

Year of construction: 2018, condition: ready for operation (used), Offered is a cleaning system for assemblies in electronics manufacturing: Functions: injection flooding with compressed-air support, vacuum drying, 100% recirculation (closed loop), MPC-cleaner compatible. Technical data: cleaning tank 80L, rinsing tanks 2x 60L. Stainless steel construction. Dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 700kg, including operating manual, data sheet, CE declaration. Viewing possible by arrangement. Fedpfxjx Hff Ej Agfepf

Year of construction: 2010, condition: ready for operation (used), Basket dimensions X/Y/Z: 670mm/480mm/300mm, max. batch weight: 200kg, average batch weight: 150kg, cycle time: approx. 5-10min/batch, heating time: 3h-4h, working chamber: 2, water quality: approx. 10°dH, exhaust air volume: approx. 240m³-480m³/h, loading height: 920mm, water/air temperature: 70°C/130°C, cleaning agent pH range: 7-9. Machine dimensions X/Y/Z: approx. 5400mm/2500mm/3100mm, weight: approx. 5000kg. Documentation available. A visit on site is possible. Fpjdpfxsxyk Tre Agfef

Year of construction: 2004, condition: ready for operation (used), Cycle time: approx. 31s, machine dimensions X/Y/Z: approx. 2200mm/2400mm/2300mm, weight: approx. 1500kg, control: Siemens. An on-site inspection is possible. Fpsdsxwcvgepfx Agfsf

Year of construction: 2012, condition: ready for operation (used), A tunnel washing machine WB Busser for cans is available. Throughput capacity: 450-600 cans/hour, outlet dimensions X/Y/Z: approx. 520mm/300mm, conveying height: 1040mm, max. product dimensions X/Y: 375mm/180mm, conveying speed: 7m/min, max. throughput capacity: 3600/h. Machine dimensions X/Y/Z: approx. 4800mm/1750mm/2050mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible. Fpodpfsxa Ekxox Agfof

Year of construction: 2024, condition: ready for operation (used), Nominal output: 9500 bottles/h (based on 0.5 litre NRW bottle, 68x260mm, 370g), mechanical control range: 3800-10,450 bottles/h, cycle time: 9.47s, total bottle cells: 3375, filled: 3175, per row: 135 basket rows, cell pitch: 95mm, chain pitch: 140mm, drive lanes: 3 lanes, discharge lanes: 3 lanes. Total throughput time: 21.32min, total immersion time: 7.24min, caustic immersion time: 5.34min, caustic filling time: 7.05 min, caustic contact time: 9.91min, total rinse time: 123s, total spray time: 47s, water consumption: 2.61m³/h, 275 ml/bottle, heat consumption (operation): 721. 715 kJ/h = 172,247 kcal/h, 75.97 kJ/bottle = 18.1 kcal/bottle, heat consumption (heating): 2,880 MJ = 687,467 kcal, total installed power: 27.2kW, pump power: 20.4kW, drives: 5.7kW, compressed air consumption (at 6bar): 0.2m³/h, dimensions housing: 7162x2740x2500mm. Overall dimensions: 7162x3540x2730mm, minimum access opening (W x H): 3840x2000mm, minimum ground clearance: 75 ± 25mm, height of infeed/outfeed: 645/1165mm, empty weight: 11,680kg, operating weight: 31,563kg, floor load: 8690kg/m², load per spherical base: 2130kg, number of spherical bases: 12. The machine has been running for approx. 6 months, so it is almost as good as new, including documentation. An on-site inspection is possible. Fsdpfjwb E S Isx Agfepf

Year of construction: 2024, condition: ready for operation (used), An originally packaged Ecoclean spray-flood cleaning system with a vacuum-tight working chamber is available. Working chamber diameter 1: 650mm, working chamber diameter 2: 750mm, max. basket dimensions 1 X/Y/Z: 670mm/480mm/300mm, max. basket dimensions 2 X/Y/Z: 670mm/480mm/400mm, max. batch weight: 150kg, max. door opening angle: 135°, max. spray pressure: 2bar, filling volume: approx. 1750l. Machine dimensions X/Y/Z: approx. 3450mm/2000mm/2700mm, weight: approx. 4200kg. Documentation available. An on-site inspection is possible. The machine has never been unpacked. Fodpfx Agjxwcvasfspf

Year of construction: 2005, condition: ready for operation (used), Tank capacity: 775l, max. batch weight: 100kg, heating capacity: 26kW, max. temperature: 75°C, basket dimensions X/Y/Z: 660mm/480mm/338mm, fine filtration tank 1/2: 100µm/50µm. Machine dimensions X/Y/Z: approx. 1850mm/1400mm/1800mm, weight: approx. 950kg. The machine was overhauled in 2024 and has not been used since. Including basket rotation with swivel drive, automatic water filling and oil separation with coalescence separation unit and oil collection container. Documentation available. On-site inspection is possible. Fpjdowr Dxhjpfx Agfof

Condition: new, The POSEIDON-1000 cleaning machine is designed to diagnose, wash, and dry DPF filters and catalytic converters of various designs, meeting EURO 5 and EURO 6 standards. The machine offers gentle and effective cleaning through a washing method that achieves excellent results without damaging the expensive filters. The stand operates based on hydro-impact and turbulent fluid movement, using special washing solutions and temperature regimes for effective cleaning. After cleaning, the filter's operating properties are restored by 97%. KEY FEATURES - Testing of the filter before washing to assess the degree of clogging and after washing to check the quality of the cleaning. - Automated washing cycle with the possibility of programming all operating modes. Filter cleaning is hydrodynamic, with hydraulic and pneumatic systems operating in specific modes to generate hydraulic impulses for the removal of contaminants. - Accelerated drying of the filter by means of a powerful hot air blower, which allows the complete removal of residual moisture from the product. >> This allows the entire cleaning cycle to be completed in a short time, >> and return to the customer a clean and dry filter ready to be fitted to the vehicle. Perspective business with POSEIDON-1000 • The equipment and technology allow to perform high quality cleaning of DPF particulate filters of all types and brands of cars. • The most functional stand among foreign analogues, thanks to which it has high productivity. • Automated operation and control of the process of cleaning and drying the filter allows the stand to be operated by one person. • Minimal resources and time required to open your own service for cleaning particulate filters with our equipment. • Maximum quick payback of the equipment if you own a service for the repair of automotive units. YOUR BENEFITS + Automated process of DPF filter cleaning with the possibility of programming all the machine's operating modes, gives you the opportunity to independently adjust the washing mode to increase the efficiency of the processes or to work with the modes set by the manufacturer. + Full control of the filter cleaning and drying process is guaranteed by the presence in the standard programme of graphs displaying air or water pressure values in real time. + The filter condition diagnostic function with report printing allows the creation of reports before cleaning (to check the degree of contamination) and after cleaning (to check the quality of the operation performed). + The working surfaces and the body of the stand are not subject to corrosion as they are made of stainless steel sheet material. + The hermetic chamber not only limits the spillage of technical fluids, but also reduces the noise level to acceptable levels, making work on the stand more comfortable and safer. + Quick installation of the DPF filter is possible thanks to a separate pneumatic system for the connection of a universal quick-fit adapter. + The universal tool allows the installation of any DPF filter, regardless of the vehicle type. + Closed-loop fluid filtration is achieved with coarse and fine filters. The filters are equipped with pressure gauges that allow the degree of contamination to be determined. Fpedpfx Aopbv Hgjgfof + Rationally selected water tank volume allows to provide short fluid warm-up time, long time between fluid changes. Please contact us to get the best offer!

Condition: excellent (used), Year of construction: 2004, Hinst continuous cleaning system Fpjdpfx Ajg Ipp Asgfef Continuous washing plants of the manufacturer Hinst are designed to treat serial parts in high quantities with highest cleanliness requirements at the same time. Plant no. 04.333 Year of construction 12.2004 dimensions approx. WxDxH: 3,80 x 4,30 x 3,80m incl. - 6 baskets: basket dimensions: 48,5x48,5x H26cm      - roller conveyor 2,10x52x90cm The continuous cleaning system has already been professionally dismantled and stored at a value of 3.500 €. these are included in the purchase price Transport can be organised by us, loading volume 2 articulated lorries. Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Year of construction: 2010, condition: used, functionality: fully functional, machine/vehicle number: MAXI 91-2, Easy handling thanks to the fully automatic cleaning process. This allows specialists to concentrate on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing suds). The soiled items to be cleaned are placed in the rotating washing basket and the lid is closed. After setting the desired washing temperature and time, the appliance is switched on and the lye in the tank is heated. When the appliance is closed, the basket rotates around its own axis at a constant speed. The pump units draw the suds from the wash tank and convey them through 6 stainless steel nozzle pipes with overlapping flat jet nozzles. The items to be cleaned are intensively blasted with hot suds from all sides while the motor-driven basket rotates evenly. Once the cleaning process is complete, the appliance switches off automatically. Advantages 2 pumps arranged horizontally 6 three-dimensionally arranged stainless steel nozzle pipes Robust stainless steel design Additional small parts cleaning basket made of stainless steel (diameter 170 mm) Rotating stainless steel washing basket, V-belt drive via separate motor Fpjdeudz D Uopfx Agfsf Steam extractor Stainless steel sieve plate with filter basket above the wash tank Low water cut-out Stands individually height-adjustable Technical data Dip tank / basket capacity 190 l Diameter of dip tank / basket 910 mm Load capacity 200 kg / optional 300 kg Temperature min. - max. 0-60 °C Working height 500 mm Dimensions (W x D x H) 1310 x 1160 / 1350 x 1285 / 2000 mm Ei8Vwcub0 Weight 150 kg Heat output 6 kW Spray volume 2 x 6600 l/h Stainless steel material Electrical connection 8 kW/ 400 V/ 50 Hz Pump pressure 2.5 bar

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, Connection: 3.55 kW / 230 V / 50 Hz Fjdpfx Agoxiwc Sjfjpf External dimensions (WxDxH): 945 x 830 x 1025 mm External dimensions (WxDxH, open): 945 x 830 x 1640 mm Weight: 60 kg Basket diameter: 600 mm Useful height: 380 mm Pump pressure: 2.2 bar Spray volume: 4,200 l/h Load capacity: 100 kg The soiled item to be cleaned is placed in the rotating wash basket and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the cleaning solution in the tank is heated. Inside the closed machine, the basket rotates at a constant speed around its own axis. The pump system draws the cleaning solution from the wash tank and feeds it through 6 stainless steel spray pipes equipped with overlapping flat jet nozzles. The item is thoroughly sprayed from all sides with hot solution during even rotation of the basket, which is driven by the jet action. After the cleaning cycle is complete, the unit shuts off automatically. Advantages: - 1 horizontally mounted pump - Flow rate: 70 L/min - 3 three-dimensional stainless steel spray pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket driven by water jet - Steam extraction - Stainless steel perforated plate with filter inlets above the wash tank - Water shortage safety device

Condition: good (used), Year of construction: 2015, functionality: fully functional, Available immediately! Function Easy operation thanks to a fully automatic cleaning process, allowing professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing solution). The contaminated items are placed in the rotating washing basket, and the lid is closed. After setting the desired washing temperature and time, the unit is switched on and the solution in the tank is heated. Inside the closed unit, the basket rotates at a constant speed around its own axis. The pump units draw the washing solution from the tank and distribute it through 6 stainless steel jet pipes with overlapping flat spray nozzles. The items are intensively sprayed from all sides with the hot solution due to the uniform rotation of the motor-driven basket. Once the cleaning process is complete, the unit shuts off automatically. Advantages Fpodpfjx Izwmjx Agfef - 2 horizontally mounted pumps - 6 three-dimensional stainless steel jet pipes - Robust stainless steel construction - Additional small parts cleaning basket made of stainless steel (Ø 170 mm) - Rotating stainless steel wash basket, V-belt drive via separate motor - Steam extraction - Stainless steel sieve plate with filter basket above the wash tank - Suction filter in front of the pump chamber - Water shortage safety feature - Individually height-adjustable feet Technical Data Capacity dipping tank / basket: 280 l Diameter dipping tank / basket: 1150 mm Load capacity: 350 kg / optional 500 kg Temperature min. - max.: 0-60 °C Working height: 700 mm Dimensions (W x D x H): 1570 x 1510 / 1830 x 1495 / 2175 mm Weight: 250 kg Heating power: 10 kW Spray amount: 2x10800 l/h Pump pressure: 2.3 bar Material: Stainless steel Electrical connection: 13.5 kW / 400 V / 50 Hz / 32 A

Condition: excellent (used), Bous Waschfix 70/T3 WSA cleaning and degreasing plant BOUS Cleaning & Degreasing Plant Washfix 70/T3 WSA Fpodpjpudubjfx Agfef Special equipment: Ultrafine filter Drain pump Filter monitoring Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!