Used Liebherr R 914 Hdsl for sale (241)

Year of construction: 2021, condition: new, Field of application: Construction Empty weight: 1.970 kg Attachment suited for: Loaders Selling price: € 9.750, US$ 10.390 Bucket volume: 3.2 m^3 Pedpfephq Dwjx Aa Djgg Type: General Purpose Machine: Liebherr L550 Edge Length: 2700mm Capacity: 3,2m^3 Weight: 1970kg Teeth: Metalon 1U-1867 Bolted We manufacture high quality buckets and attachment for all brands. For detailed information, please contact us. The price may change.

Condition: used, Year of construction: 2018, operating hours: 9,100 h, Equipment: all wheel drive, Liebherr Wheel Loader L 538 P High-lift 2 plus 1 Serial No.: VATZ1559VZB049931 Year of Manufacture: 2018 Operating hours: approx. 9,100 Service history available until 23.01.25 at 8,836 hours (recorded on the Liebherr central computer) Liebherr 4-cylinder inline engine, water-cooled with turbocharging and intercooler, 150 HP Hydrostatic drive with 3 driving ranges: - Drive range 1: 0 – 6.0 km/h - Drive range A1-2: 0 – 16.0 km/h - Drive range A1-3: 0 – 36.0 (40) km/h * Automatic climate control – maintains the set temperature * BSS ride control (oscillation damping) * Access aid for easier cleaning of the windscreen * Central lubrication system – Liebherr factory-installed * 3rd hydraulic circuit, e.g. for high-tip bucket, grapple bucket, sweeper, etc. * Engine air intake via TOP-AIR pre-filter * Premium display with touchscreen * Comfort driver's seat with pneumatic suspension * Seat heating * Adjustable steering wheel * Opening window on the left in the door * 4 x working lights front on cab roof * 4 x additional lights rear on cab roof * Rotating beacon, yellow, on cab roof, center * Engine air intake via TopAir pre-separator * Fluff screen in front of radiator pack * Coarse-mesh radiator for easier cleaning * Reversible fan for blower cleaning of radiator pack * Battery master switch * Radio with Bluetooth + USB * Fire extinguisher in cab * Rear mudguard extensions – rubber * Piston rod protection for tilting cylinder * Rear-view camera, display shown when reversing * Automatic engine shutdown after 5 minutes idle * Visual reverse warning system with blue strobe lights * Rear distance warning/obstacle sensors, right and left (acoustic signal) * Rubber extensions on rear mudguards * Reinforced rear bumper/counterweight * Lamp carrier made of steel instead of plastic Pedox Iy D Sjpfx Aa Degg * Windscreen cracked Permissible total weight: 17,000 kg – curb weight approx. 14,500 kg Machine width: 2,500 mm Tires: 20.5 x 25 VA L5 – 50% foam-filled Tires: 20.5 x 25 HA L5 – 50% foam-filled Offer includes hydraulic quick coupler and bucket: €56,900 net Optional equipment at extra charge: - 4-in-1 bucket (clamshell/grading bucket) 2 m³: €3,950 * High-tip bucket from 3 – 5 m³ – Price on request! - Light material bucket 5 m³: €3,990 - Bucket with clamp from 2.0 to 3.5 m³: €3,660 - High-tip bucket from 2.5 – 5.5 m³: from €5,990 - Pallet forks, 5 ton: from €1,950 * All prices net plus VAT or for export Sale only to businesses or for export. Sold as is in current condition. No warranty or guarantee. Kilometers and operating hours are read from the odometer/hour meter; no guarantee/warranty for accuracy. Subject to prior sale. This description does not constitute a binding offer. The information provided does not constitute guaranteed characteristics. The description and details serve only for general identification of the vehicle and do not constitute a warranty in terms of sales law. No claim to completeness. Information/descriptions and pictures are non-binding and do not constitute guaranteed characteristics.

Condition: used, mileage: 1,001 km, gearing type: other, color: white, first registration: 01/2015, Year of construction: 2015, driver cabin: other, Vehicle location: Bovenden. Pgodpfjx H Twcex Aa Deg Superstructure: Liebherr concrete mixer HTM 904F 9m³ on Dautel WS4 interchangeable system. The concrete mixer is part of an interchangeable system (Dautel WS4) with a VDL SK-25-5700 roll-off device with push-articulated arm for containers up to 7 m in length. The interchangeable system was removed from an Arocs 3240 8x4 with a 4250 mm wheelbase. Interchangeable system and roll-off device available at extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: refurbished (used), Major Overhaul Gas Engine The following work is carried out during the major overhaul: Replacement of all wear parts, bearings, filters, and seals. Renewal or reconditioning of: - Reconditioning of crankshaft and crankcase - Cylinder liners, piston rings (pistons as required), - Sensors - Water pump - Starter motor - Cylinder heads - Spark plugs - Injectors and injection lines - Thermostat housing - Connecting rod and cylinder head bolts - Oil modules - Viscous damper The following components are also inspected and replaced if necessary: - Rocker arms - Connecting rods - Lubricating oil pump - Gears The scope of delivery is defined as follows: -with starter motor -with cylinder heads -without exhaust manifolds or elbows -without turbocharger -without charge air cooler -without gas mixer -without throttle valve -without engine management and ignition system -without charge air piping The engine is equipped with the following sensors: Pgedpex Huxuofx Aa Deg -Engine oil temperature sensor -Engine oil pressure sensor -Speed sensors (2 units) -Ignition pulse generator This is a factory-refurbished product. Note: Refurbished parts are those that, in addition to a functional test, have been inspected for visible defects; any defective parts have been repaired or replaced. All replacement engines supplied by or through agriKomp GmbH require the return of an identical old engine. In the event that the exchange unit is not returned within 8 weeks from the exchange date, a surcharge of €10,000 will be invoiced.

Condition: used, functionality: fully functional, fuel type: diesel, color: original, overall weight: 4,00,000 kg, tire condition: 75 %, drive condition: 75 %, axle configuration: 8x8, brakes: engine braking, suspension: hydraulics, Year of construction: 2000, operating hours: 25,000 h, machine/vehicle number: LHM400, Equipment: additional headlights, all wheel drive, cabin, crane, hydraulics, onboard computer, dismantled Liebherr LHM 400 - parts ready Pjdpfx Ajx N Twhja Dogg

Condition: ready for operation (used), Year of construction: 1963, functionality: fully functional, wheel diameter: 900 mm, workpiece diameter (max.): 150 mm, overall weight: 8,200 kg, rotational speed (max.): 80 rpm, workpiece length (max.): 750 mm, TECHNICAL DETAILS Max. wheel diameter: 900 mm Max. module: 10 Max. cutter diameter: 190 mm Max. cutter length: 320 mm Cutter speeds (stepless): 13–80 rpm Max. workpiece length: 750 mm Max. workpiece diameter: 150 mm MACHINE DETAILS Pgodpfx Aexvr Ensa Djg Machine weight approx.: 8,200 kg Note: The arbor for the counter-support is missing.

Condition: used, color: other, Year of construction: 2020, Serial number: 57987 Pedpou Dmq Aefx Aa Dogg Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly. We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines.

Condition: excellent (used), functionality: fully functional, color: white, Year of construction: 2018, Mobile Crane | LIEBHERR LTM 1200-5.1 - First registration: 13/04/2018 - Inspection sticker valid until: 04/2025 - Recorded mileage: 43,312 km (as of January 2025) - Crane operating hours: 6,562 h (as of January 2025) - Carrier operating hours: 2,373 h (as of January 2025) - Type/Variant/Version: A54B - Colour: white - Max. load capacity: 200 t Pgsdpfxjxpvb Ts Aa Dog - Telescopic boom: 72 m - Max. lifting height: 101 m - Max. outreach: 80 m - Curb weight: 59,280 kg - Gross weight: 60,000 kg - Drive type: Diesel - Emission class: Euro 4 / 97/68QA*2012/46QA - Maximum speed: 80 km/h - Displacement: 11,946 ccm - Power: 400 kW - Equipment: 5 axles, seats: 2, radio control, reversing camera, fire extinguisher, first aid kit, 2 pcs. ladders, rear storage box - Tyres: MICHELIN X-CRANE+, 385/95R25 Inspection/viewing possible at any time by prior arrangement. #Tags: Liebherr | Liebherr Crane | LTM1200

Condition: excellent (used), power: 200 kW (271.92 HP), operation weight: 27,500 kg, Year of construction: 2009, operating hours: 11,796 h, Equipment: air conditioning, Liebherr L576 Year: 2009 Operation hours: 11.796 Hrs ROPS Airco Pjdoxnmz Ijpfx Aa Degg back drive camera tyres: 26.5R25 approx 60-70% good bucket with edge engine with 200kW CE / EPA operation weight: 27.5to.

Condition: good (used), Year 2003 Processing machine for machining splines and sprockets on crankshafts or shaft-like components Liebherr PC-NC control system for disk cutting wheels in the range 180-300mm for hobbing Vertical machining with straight shaping head and synchronization Clamping in chuck in the machine bed and tailstock as counterholder Integrated ring loader between machining and loading position Automatic loading hatch from above with loader interface The machine is currently still in series production and can be inspected under power Front screen of the monitor defective, display undamaged after visual inspection Fuse for controls and drives included - free location Availability after consultation, warranty excluded Year of Production:2003 Shaping machine for producing splines and sprockets onto crankshafts and Control Liebherr PC-NC For shaping tooling in range of 180-300mm for Hobbing Vertical machining with straight cutting head and Synchronization Clamping in Jaw on the machine bed and tailstock as counterpart integrated Ring-load between Machining and loading position Pedpfxot Utdpj Aa Degg automatic Gantry door for overhead loading and corresponding interface Machines are actually in serial production and can be inspected upon request front glass of Monitor damaged, screen itslef seems unharmed on first glance safeguarding of control and drives included - free location availability on agreement, no warranty possible

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, General Machine Information Machine Type: CNC Gear Hobbing Machine (Abwälzfräsmaschine) Control Unit (CNC): Siemens SINUMERIK 840D (Digital) Year of Manufacture: 2002 Machine Weight (Approximate): 9500 kg (9.5 tonnes) Total Connected Load (Approximate): 25 kVA – 35 kVA Workpiece and Machining Capacity Maximum Workpiece Diameter: 150 mm Maximum Module (Nominal for Steel): 3 mm (up to 5 mm possible depending on conditions) Maximum Workpiece Length (Axial Travel): 450 mm Maximum Workpiece Weight (Table Load): 15 kg Workpiece Table Diameter: 145 mm Table Speed (Max.): Up to 800 min⁻¹ (rpm) Hobbing Tool Spindle Maximum Hob Diameter: 90 mm (Often cited as 80 mm max in some configurations) Maximum Hob Length: 220 mm (Often cited as 200 mm max in some configurations) Maximum Hob Spindle Speed: 4500 min⁻¹ (rpm) or up to 6000 min⁻¹ Hob Spindle Drive Power (S6-60%): Up to 19 kW (or up to 23 kW depending on configuration) Hob Head Swivel Angle (B-Axis): ±45 degrees Axes Travel and Feed Rates Axial Travel (Z-Axis / Hob Slide): 250 mm or 400 mm (Depending on configuration) Radial Travel (X-Axis / Cutter Infeed): 10 mm (minimum distance) to 200 mm (maximum distance) Maximum Shift Travel (V-Axis / Tangential): 180 mm (Shift travel for hob) Maximum Rapid Traverse Rate (X/Z): 17 000 mm/min or up to 40 m/min Pgedpox Ezyvofx Aa Dog Felsomat FZ 250 Loader / Automation Loader Type: Felsomat FZ 250 (Typically an integrated ring loader or swivel loader) Workpiece Change Time (Chip-to-Chip): Often less than 4 seconds (With high-speed automation) Loader Gripper Type: Typically double grippers for simultaneous unloading/loading Maximum Workpiece Weight (Loader): Up to 15 kg

Condition: used, power: 100 kW (135.96 HP), fuel type: diesel, color: other, Year of construction: 2017, operating hours: 12,235 h, Applicable material: Waste Empty weight: 22.900 kg Make of engine: Liebherr D834 Serial number: 097287 Delivery terms: EXW Please contact Christiaan Dekker for more information Liebherr LH22 M Year: 2017 Hours: 12235 Liebherr sorting grab 4 x Stabilizer Hydraulic lift cabin Central greasing Pgodpfjw I Ex Tsx Aa Dog Webasto heating CE Always Liebherr serviced

Condition: excellent (used), mileage: 14,754 km, color: other, lifting height: 52,000 mm, Year of construction: 2004, operating hours: 4,107 h, Drivetrain Drive: Wheel Functional Lifting capacity: 100.000 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Identification Serial number: 065 295 Other information EPA Marked: yes Delivery terms: EXW Production country: DE Additional information Please contact Christiaan Dekker for more information Pgjdjx Hfwzjpfx Aa Deg Liebherr LTM1100-2 EX-Army Year: 2004 Kilometers : 14754 Hours undercarriage: 4107 Hours upperstructure/crane : 9074 10 X 8 X 10 Drive train CE 52 meter boom with 5 sections + 1 base section Full counterweight with 2 extra side weights

Condition: good (used), mileage: 1,08,537 km, color: orange, lifting height: 72,000 mm, Year of construction: 2014, operating hours: 5,551 h, Drivetrain Drive: Wheel Make of engine: Liebherr Weights Empty weight: 60.000 kg Functional Mast length: 7.200 cm Lifting capacity: 200 kg CE mark: yes Condition Technical condition: good Visual appearance: good Identification Serial number: 093450 / WLFA54AZ2FEZZ0102 Other information EPA Marked: yes Emission level: Stage IIIB / Tier IV interim Delivery terms: EXW Carrier engine: Liebherr D856 Upper engine: Liebherr D934 Upper hours: 12599 h Counterweight: 72000 Transport dimensions (LxWxH): 15,4x3x4 Production country: DE Min boom length: 1320 cm Pgodpfsxvk Stex Aa Dog Additional information Please contact Jeroen Heindryckx, Bart Apers or Matthias Eyckmans for more information jib not available for this crane

Condition: used, Year of construction: 2014, Equipment: all wheel drive, Errors and prior sale excepted. Viewing by appointment only. WhatsApp inquiries will not be answered. Podpfxevpc Rro Aa Degg

Condition: used, mileage: 88,100 km, first registration: 04/2005, fuel type: diesel, tire size: 445/95 R 25, axle configuration: 4x4, fuel: diesel, brakes: retarder, suspension: hydraulics, Year of construction: 2005, Equipment: ABS, crane, retarder, = Additional options and accessories = - Mechanical tachograph - Hub reduction - Radio/CD player = Further information = Pedpfx Aex Dc Ehja Dogg Tyre size: 445/95 R 25 Suspension: hydraulic suspension Front axle: Steered; Tyre tread left: 80%; Tyre tread right: 80% Rear axle: Tyre tread left: 60%; Tyre tread right: 60% Unladen weight: 23,999 kg Payload: 1 kg Gross vehicle weight: 24,000 kg Damage: none

Condition: good (used), functionality: fully functional, We offer a used Liebherr scraper, semi and fully automatic. Psdpforpmlrsx Aa Djgg Fully functional, with control system.

Condition: used, Year of construction: 2014, operating hours: 11,800 h, Equipment: all wheel drive, New arrival: Liebherr L 542 Z 2plus1 Chassis number: VATZ1269CZB035975 Year of manufacture: 2014 Operating hours (read off): approx. 11,841 Delivery date: 20.05.2014. Service history available on Liebherr central computer up to 27.09.2023 – 10,076 hours 4-cylinder inline engine, water-cooled, turbocharged, Emission Stage IIIB, 155 HP Permissible total weight approx. 17,000 kg, unladen weight approx. 15,000 kg Machine width: 2,500 mm Hydrostatic travel drive with 3-speed transmission Equipment: - Ride control - “Comfort” driver’s seat with pneumatic suspension (with seat heating) - Radio with CD and USB connection - 2 work lights at the rear driver’s cab roof - 4 work lights at the front driver’s cab roof - Automatic engine shut-off after 5 minutes at idle - 3rd hydraulic control circuit – proportional control via joystick - Pre-filter for engine air intake “TOP-AIR” - Automatic central lubrication system (Liebherr factory installation) - Access aid for easier cleaning of the windscreen - Lint screen in front of cooling package prevents radiator contamination - Coarse-mesh radiator for easier cleaning - Reversible fan for cleaning of the cooling package - Coolant pre-heating (with 220 V) - Sun visors front and rear - Tilting window left in driver’s door - Adjustable steering column (height and tilt) - Tilting window left in driver’s door - Tilt cylinder – piston rod protection Pgjdpfsxy Dz Nox Aa Deg - Reversing warning system (“beeper”), can be switched off - Provision for rotating beacon - Reversing camera Tyres: 20.5 x 25 L3 Front axle 2 – 95% tread, as new Tyres: 20.5 x 25 L3 Rear axle 2 – 95% tread, as new Offered with fixed mounted 2.8 m³ bucket – price: €43,900 net Optional equipment at extra cost: - Hydraulic quick coupler €3,550 (incl. conversion from fixed bucket to quick coupler bucket) - High-tip bucket from 3.0 m³ to 5.5 m³ from €4,950 - Bucket with clamp for QC, 3.0 m³ from €3,660 - Light material bucket 4 m³ €4,500 - 4-in-1 bucket 2 m³ on request - Pallet forks 5 or 8 tons from €1,990 - Available with used weighing system as well! Pfreundt WK 50 – €3,950 Printer for scale €850 All prices net export – domestic plus 19% VAT Sale to business customers or export only. Sale as is. No guarantee or warranty. The stated mileages or operating hours are those read from the meter; we do not guarantee their accuracy! Subject to prior sale. Vehicle description does not constitute a binding offer, and details are not to be considered as warranted characteristics. Description and information serve only for general vehicle identification and do not constitute warranty under commercial law. No guarantee for completeness. Stated details/descriptions and images are non-binding and not to be deemed guaranteed properties. Only those specified in the order confirmation and invoice are valid. The seller assumes no liability/warranty. The advertisement may contain typing and data transmission errors.

Condition: good (used), HYDRAULIC CYLINDERS 7.26m STROKE (2PIECES) AND BIG VARIATE OF OTHER HYDRAULIC CYLINDERS Pgsdpfxedkq Ewo Aa Deg

Condition: used, color: other, Year of construction: 2020, Serial number: 58157 Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime.  All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly. Pedpfx Aaexxxhus Djgg   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: good (used), Year of construction: 2009, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm taper of shaper cutter SK control Bosch MTX table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power capacity Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition. Pgjdpfswzmpzex Aa Deg

Condition: good (used), Year of construction: 2007, max. wheel diameter 1200 mm gear width 260 mm max. module 16 min. module 0,5 stroke 270 mm distance between table/spindle 920 mm Psdpfx Aaewzmp Ie Dsgg taper of shaper cutter SK control Liebherr LH 90 table diameter 900 mm min. workpiece diameter-at internal hobbing 1200 mm strokes - infinitely variable 50-1000 Hub/min spindle diameter 125 mm table hole 320 mm Distance of shafts Min/Max 0-820 power requirement Stosskopf 30 KW total power requirement 72 KVA weight of the machine ca. 24 t dimensions of the machine ca. 6,5x2,9x4 m Liebherr LH 90 control, 9 axis CNC, top condition.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 1719, wheel diameter: 280 mm, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 MACHINE DETAILS Machine weight: 13 t Operating voltage: 400 V Psdpjw T R Aujfx Aa Degg Control voltage: 24 V DC

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 1130, table diameter: 250 mm, wheel diameter: 280 mm, spindle speed (max.): 1,500 rpm, TECHNICAL DETAILS Max. wheel diameter: 280 mm Max. module: 7 Table speed range: 100 rpm Table diameter: 250 mm Centre distance: 15 - 285 mm Max. axial travel: 350 mm Milling Head Drive power: 16 kW Min. number of teeth: 4 Cutter speeds: 1,500 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Tangential travel: 200 mm Tangential speed: 3,000 mm/min Swivel angle: ± 45° MACHINE DETAILS Approx. machine weight: 13,000 kg Supply voltage: 400 V Pgodsw T R Ahepfx Aa Deg Mains frequency: 50 Hz Connected load: 35 kVA

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1443, table diameter: 180 mm, gear diameter: 200 mm, milling spindle length: 230 mm, spindle speed (max.): 750 rpm, swivel angle A-axis (min.): -45 °, swivel angle A-axis (max.): 45 °, TECHNICAL DETAILS Max. workpiece diameter: 200 mm Table diameter: 180 mm Max. table speed: 100 rpm Center distance: 15 - 400 mm Machine column Max. axial travel: 600 mm Milling head swivel device Milling head swivel angle: ± 45 degrees Podpfx Aaow T Ry Ts Degg Milling head Drive power: 27 kW Max. module: 7 mm Max. cutter speed: 750 rpm Max. cutter diameter: 160 mm Max. cutter length: 230 mm Max. tangential travel: 200 mm Max. tangential speed: 3,000 mm/min Counter column Max. counter support travel: 540 mm Max. counter support rapid traverse: 15,000 mm/min Max. counter support arm force: 13 kN MACHINE DETAILS Approximate total weight: 15,000 kg Ambient temperature: 15 - 38 °C Operating voltage (tolerance +/- 10%): 400 V Operating frequency (tolerance +/- 2%): 50 Hz Control voltage: 24 V DC Hydraulics Hydraulic oil: HLP 46 Max. operating pressure: 70 bar Pump flow rate: 24 l/min Hydraulic volume in hydraulic reservoir approx.: 7 l Max. average noise level: 82 dB(A)