Used Linear Module for sale (6,877)

Condition: used, all stainless steel completely isolated infeed conveyor outfeed conveyor Itodpszzk E Dofx Adlsl belt width ± 1.350 mm 3 tiers from 6.000 mm adjustable speed suitable for thermal oil heating

Condition: used, clear span: 2,700 mm, total length: 14,040 mm, total height: 4,500 mm, load per truss pair (max.): 3,000 kg, number of shelf rows: 1, Technical data for the pallet racking system: Racking system: Bito Type: Pro Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 14,040 mm Number of bays per racking row: 05 units, each 2,700 mm Number of levels including base level: 02 units Technical data for volume: Pallet spaces per bay: 09 units Itedpfx Adez Aztholel Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): 1,000 kg Included in the scope of delivery: 06x Pallet racking uprights, used Material color: Sendzimir galvanized Type: P 2 Profile dimensions: 90 x 65 x 1.75 mm Including cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted framework) 4,500 mm high 1,100 mm deep 20x Pallet racking beam, used Material color: blue Box profile: 120 x 50 mm Beam type: PT120M Connector: 5 hooks Clear width: 2,700 mm Max. load per beam pair: 3,000 kg, with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal members against unintentional lifting 06x Upright protection, used Material color: yellow Overall height: approx. 715 mm Overall width: approx. 99 mm Internal width: approx. 92 mm Leg dimensions: approx. 65 x 65 mm Material thickness: approx. 3.5 mm Weight per unit: 4.96 kg Quantity: 01x / Pallet racking upright 24x Bolt anchor, new Manufacturer: Hilti Type: HST2 M12x105/10 Material: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Material: Fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign With information on bay and shelf loads, Manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: new, Year of construction: 2025, functionality: fully functional, The weighing system is also designed for mixing up to 4 products. Each of the 4 units can be programmed individually. Itedpfx Ajya Ahvsdlsl The system can be tested at our test center, 20 km from Frankfurt am Main. Features - Easy operation and cleaning - Convenient control via color touchscreen - Memory for various weighing recipes - Precise weighing results thanks to three-stage weighing: coarse/intermediate/fine dosing, each programmable individually - Tool-free format changeover Technical data - Weighing range: 20g to 4000g - Accuracy: up to 0.5g, depending on product - 6-liter weighing hopper - Max. speed: 60 weighing cycles/minute - Weight: 240kg - Material: stainless steel 304 - Connection: 220V / 50Hz / 6A

Condition: excellent (used), FAM YURAN Linear Dicing/Cutting Machine – Stainless Steel FAM YURAN industrial linear dicing/cutting machine, designed for continuous and precise cutting of food products into cubes, strips, and other geometries, depending on the blade set installed and the working configuration. Manufactured by FAM, a specialist in industrial cutting technology, the YURAN is designed for use in high-capacity processing lines, providing a regular and repeatable cut size. Its construction primarily in stainless steel, continuous feeding system, and hygienic design make it especially suitable for processing plants for vegetables, fruits, meat products, and other foods that require size reduction before subsequent processing stages. Itjdszxk Tcepfx Adlsl MAIN FEATURES -Manufacturer: FAM -Model / Series: YURAN -Type: Industrial linear dicing/cutting machine -Automatic and continuous processing -Product cutting into cubes -Possibility of other cutting formats according to installed tooling -Continuous product feed -Industrial blade system -Uniform and repeatable cutting -Construction primarily in stainless steel -Protected cutting area -Integrated control panel -Robust construction for industrial production -Hygienic design for the food industry -Access for cleaning and maintenance -Integrable into automatic processing lines PROCESS The FAM YURAN is designed to receive the product continuously and guide it in a controlled manner to the cutting unit. During its passage through the machine, the product goes through the different cutting stages necessary to obtain the required final format. Depending on the blade set and configuration installed, cubes, strips, or other product sizes can be obtained. Once the cutting is complete, the product is discharged continuously to continue to the next production stage. It can be integrated with: Feeding systems Conveyors and elevators Product washers Peelers Inspection tables Scalders and cookers Cooling systems IQF freezing tunnels Weighing systems Filling and packaging machines APPLICATIONS Especially suitable for fruit and vegetable processors, manufacturers of frozen products, ready meals, and other food industries that require a high-capacity automatic cutting system. Depending on the installed tooling, it can be used for vegetables, fruits, and other food products, obtaining different cutting formats and dimensions. The combination of FAM technology, continuous linear cutting system, and industrial construction in stainless steel provides a versatile solution for professional food preparation and dicing lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, clear span: 2,700 mm, total length: 14,100 mm, load per truss pair (max.): 3,000 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 14,100 mm Number of bays / racking row: 05 units, each 2,700 mm Number of levels including base level: 02 units Technical data for capacity: Pallet spaces per bay: 09 units Pallet spaces per racking row: 45 units Total pallet spaces: 45 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: n/a Weight per pallet (max.): 1,000 kg Included in the scope of supply: 06x used pallet racking uprights Material color: blue Upright type: A103 Upright profile: 100 x 79 x 3.00 mm Incl. cross and diagonal bracing, Base plates The uprights are pre-assembled (bolted frame structure) 2,300 mm high 1,100 mm deep 20x new pallet racking beams Material color: RAL 2001 orange Box profile: 110 x 50 mm Beam type: 2C-S 1115 Clear width: 2,700 mm Agraffe: G.E. - 3 Max. load per beam pair: 3,000 kg, with evenly distributed load 40x integrated safety pin, new Material color: orange For securing the longitudinal beams against unintentional lifting 24x heavy-duty dowels, new Manufacturer: MKT Design: galvanized steel Approved for: uncracked concrete Through-installation: M 12-13/95 12x leveling plates, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x load signs With information on bay and shelf loads, manufacturer and batch number Dimensions: 297 x 210 x 2 mm Note: The images are example images to illustrate the material. The quantities shown may differ from the scope of supply. General information about the item: This item is only offered for collection. Any additional desired transport or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of supply. Itsdpfxez A Ayas Adlel

Year of construction: 2011, condition: used, functionality: fully functional, machine/vehicle number: 11ED18A, For sale: 2 National Instruments PXI-6511 Digital I/O Modules, in fully working condition. Both can be sold separately for €300 each. Manufacturer: National Instruments (NI) Model: PXI-6511 Quantity: 2 units Condition: Used – Tested and Working Channels: 64 digital input channels Itsdpfx Aszh H Sgodljl Isolation: Bank-isolated, ±30 VDC Interface: PXI Driver: NI-DAQmx compatible Both units are fully functional. Ideal for industrial automation, production line control, and testing systems. Removed from a working industrial environment, no faults found. Shipping from Hungary. International shipping available. Carefully packed with antistatic protection. Please contact us if you have any questions!

Condition: good (used), Year of construction: 2007, functionality: fully functional, load capacity per storage section: 11,500 kg, total length: 3,90,000 mm, total height: 7,000 mm, total width: 1,000 mm, shelf height: 7,000 mm, support length: 2,700 mm, shelf length: 51,300 mm, load capacity: 1,000 kg, load capacity per stand: 11,500 kg, frame height: 7,000 mm, load per truss pair (max.): 3,000 kg, frame width: 85 mm, axle spacing: 2,700 mm, mesh size: 2,700 mm, number of shelf rows: 7, pallet spaces: 1,845 euro pallets, construction width: 2,70,03,600 mm, For sale is a comprehensive used pallet racking system, predominantly from STOW, with additional sections from Link 51 and Allclick. The system has already been completely disassembled, sorted, and is ready for loading at any time. Negotiable price: €32,000 net The offer includes: STOW 95 pcs. frames, height 7,000 mm, depth 1,000 mm 720 pcs. beams, length 2,700 mm Load capacity approx. 1,000 kg per pallet STOW 20 pcs. frames, height 7,500 mm, depth 1,000 mm Itodpfx Adezugtdolel 114 pcs. beams, length 3,600 mm Load capacity approx. 1,000 kg per pallet LINK 51 17 pcs. frames, height 7,500 mm, depth 1,000 mm 120 pcs. beams, length 2,700 mm Load capacity approx. 1,000 kg per pallet ALLCLICK 8 pcs. frames, height 7,200 mm, depth approx. 1,000 mm 95 pcs. beams, length 3,600 mm Load capacity approx. 640 kg per pallet Total: 140 pcs. racking frames 1,049 pcs. beams Also available: Back panel mesh covering an entire row of racking approx. 51,300 mm length × 7,000 mm height Impact protection various racking accessories The entire system was documented with photos, videos, and drone footage before disassembly. The racking system has already been completely dismantled and can be loaded or picked up at any time. Inspection and loading are possible by arrangement. Partial sale or sale of individual systems or larger sub-sets is possible by agreement.

Condition: excellent (used), Industrial Linear Cooker – Stainless Steel Industrial linear cooker made of stainless steel, designed for the continuous cooking and heat treatment of food products within industrial processing lines. The equipment allows for continuous and controlled heat treatment while the product moves through the processing zone, facilitating uniform production and integration with the different stages of an automated line. Its stainless steel construction, continuous transport system, and industrial design make it particularly suitable for processing plants for vegetables, fruits, and other food products. MAIN FEATURES -Type: Industrial linear cooker -Application: continuous cooking/heat treatment -Continuous processing system -Automatic product transport -Stainless steel construction -Product feeding zone -Heat treatment section -Continuous discharge -Motorized transport system -Integrated control panel -Hygienic design for the food industry -Robust construction for industrial use -Integrable into existing processing lines -Designed for continuous operation PROCESS The linear cooker is designed to perform continuous heat treatment of the product, eliminating the need to work in batch processes. The product is introduced into the equipment and advances in a controlled manner through the cooking zone, remaining for the established time to receive the required heat treatment. Subsequently, it is continuously discharged to the next stage of the process. It can be integrated with: Feeding systems Washers Peelers and cutters Conveyors and elevators Scalders Cooling systems Inspection belts Freezing equipment Fillers and packers Complete processing lines Itodozxcazspfx Adlol APPLICATIONS Particularly suitable for the fruit and vegetable processing industry, canning companies, frozen food manufacturers, and prepared food plants that require a continuous cooking or heat treatment system. Depending on its configuration and process conditions, it can be used for vegetables, legumes, fruits, and other food products that require a cooking or heat treatment stage before subsequent cooling, freezing, preservation, or packaging. Its continuous linear processing and stainless steel construction provide a robust solution for automated industrial lines for heat treatment. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2004, Technical details: x-travel: 750 mm y-travel: 600 mm z-travel: 560 mm switched on hours: 78.328 h spindle hours: 38.073 h control: Heidenhain iTNC 530 tool changer with: 30 Plätze tool taper: HSK-A 63 feed speeds infinitely variable: 90 mm/min Iedpfx Adezp Dvrolotl rapid traverse:: 90 m/min table-size: 950 x 650 mm table load capacity: 1000 kg total power requirement: 73 kVA Weight approx.: 11,0 t dimension machine approx.LxWxH: 4,9 x 4,3 x 3,15 m The DECKEL MAHO DMC 75 V linear is a highly precise vertical CNC machining center equipped with linear drive technology, making it ideal for 3-axis machining. *

Condition: used, clear span: 3,595 mm, total length: 18,575 mm, load per truss pair (max.): 2,650 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of racking bays: 01 unit Length per racking bay: approx. 18,575 mm Number of bays per racking bay: 05 units Number of levels including floor level: 02 units Technical data for volume: Pallet spaces per bay: 12 units Pallet spaces per row: 60 units Total pallet spaces: 60 units Based on: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height including pallet: not specified Weight per pallet (max.): 660 kg Included in the scope of supply: 06x Pallet racking uprights, used Material color: blue Upright profile dimensions: 100 x 69 x 2.0 mm Upright type: M-101 Including cross and diagonal braces, Base plates The uprights are pre-assembled (bolted framework) 2,500 mm high 1,100 mm deep 20x Pallet racking beams, used Material color: RAL 2001 orange Beam type: 2C-S 1315 Box profile: 130 x 50 mm Clear width: 3,595 mm Maximum load per beam pair: 2,650 kg with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting out 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Design: fully galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign With information on bay and frame loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport Iodpjz A A Auefx Adljtl or shipment of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, clear span: 3,300 mm, total length: 17,100 mm, total height: 2,500 mm, load per truss pair (max.): 1,750 kg, Technical data for the pallet racking system: Racking system: Mecalux Technical data for the installation: Number of racking rows: 01 unit Length per racking row: approx. 17,100 mm Number of bays per racking row: 05 units Number of levels including the base level: 02 units Technical data for the capacity: Pallet spaces per bay: 12 units Pallet spaces per row: 60 units Total pallet spaces: 60 units Based on: Load support: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Overall height incl. pallet: not specified Weight per pallet (max.): 435 kg Included in the scope of delivery: 06x Pallet racking uprights, used Iodpfxsz A A Dlo Adlotl Material color: blue Upright profile dimensions: 100 x 69 x 2.0 mm Upright type: M-101 Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (bolted frame) 2,500 mm high 1,100 mm deep 20x Pallet racking beam, used Material color: RAL 2001 orange Beam type: TB-S120 Box profile: 120 x 50 mm Clear span: 3,300 mm Max. load per beam pair 1,750 kg with evenly distributed load 40x Locking pin, used Material color: Sendzimir galvanized For securing the longitudinal members against unintentional lifting 24x Bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: cracked concrete 12x Shimming plate, used Design: completely galvanized For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, Precision solar simulator for the measurement and calibration of solar cells and modules. Simulates the solar spectrum using a xenon or LED-based flash light source. Uniform irradiation area, automated test procedures, and integrated control via touch panel. Compact, sound-insulated enclosure with safety interlock, signal lamp, and test chamber access via sliding door. Itsdpfx Adsxzuiasljl

Condition: used, clear span: 2,880 mm, total length: 12,450 mm, total height: 3,930 mm, load per truss pair (max.): 1,600 kg, Technical data for the pallet racking system: Racking system: Hovuma Technical data for installation: Number of racking rows: 01 unit Length per racking row: approx. 12,450 mm Number of bays per racking row: 04 units, each 2,880 mm Number of levels plus base level: 03 units Included in the scope of delivery: 05x Pallet racking uprights, used Material color: blue Profile dimensions: C 70 x 40 x 12 x 3.0 mm Incl. cross and diagonal braces, Base plates The uprights are pre-assembled (welded framework) 3,930 mm high 870 mm deep 24x Pallet racking beams, used Material color: green INP profile: 80 x 42 mm Clear span: 2,880 mm Max. load per beam pair 1,600 kg with evenly distributed load 48x Locking pins, used Material color: Sendzimir galvanized For securing the longitudinal beams against unintentional lifting 20x Bolt anchors, new Manufacturer: Hilti Type: HST2 V3 M12x105 5-25 Material: Carbon steel, galvanized Approved for: Cracked concrete 10x Shims, used Material: Sendzimir galvanized Ijdjz Az Txspfx Adljtl For leveling the racking uprights that are installed on uneven ground 01x Load sign with information on bay and shelf loads, manufacturer and batch number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2011, operating hours: 48,000 h, machine/vehicle number: IntNr231180, DMG Gildemeister CNC Multi-Slide Automatic Turning Machine MSL 60/7 Year of manufacture: 2011 Machine on-time: 56,000 hours Automatic cycle hours: 48,000 hours CNC control: FANUC 31i – Model A, 7 axes Technical specifications - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 60 mm - Spindle speed: 5,000 rpm - Spindle drive power: 7.5 kW COUNTER SPINDLE (on turret) - Max. bar diameter: 42 / (60) mm - Spindle speed: 5,000 rpm - Spindle drive power: 3.7 kW Driven tools (turret): - Tool drive power: 3.7 kW Isdpfx Aezx Rrfedlstl - Max. speed: 6,000 rpm Back-side machining: - 4 fixed tool stations - Capacity for up to 14 tools possible Bar feeder: FMB Turbo 5-55 / 3200 / A Year of manufacture: 2008 Bar diameter: 5 – 55 mm Bar length: 3,200 mm Chip conveyor included Machine can be inspected under power by appointment. Technical data, details, and prior sale subject to change and error.

Condition: excellent (used), FAM ILC-3D Linear Dicer / Cubing Machine – Stainless Steel FAM ILC-3D industrial dicer/cubing machine, designed for continuous three-dimensional cutting of food products into cubes, strips, and other regular shapes, depending on the installed blade set and cutting dimensions. Manufactured by FAM, a specialist in industrial cutting systems, the ILC-3D is designed to produce a uniform end product through a sequence of cuts in different directions. Its configuration is particularly suitable for lines where precision, size regularity, and continuous production are required. Its construction, primarily in stainless steel, feeding system, and interchangeable cutting unit allow it to be used in industrial plants processing fruits, vegetables, and other food products. MAIN FEATURES -Manufacturer: FAM -Model: ILC-3D -Type: Industrial three-dimensional dicer/cubing machine -Continuous cutting system -Cutting in 3 dimensions -Production of cubes/dices -Possibility of obtaining strips and other shapes depending on tooling -Continuous product feed -Multi-stage cutting system -Interchangeable blade sets -Cutting dimensions determined by the installed tooling -Electric motor drive -Construction primarily in stainless steel -Protected cutting chamber -Robust construction for industrial use -Access for cleaning, maintenance, and blade changes -Integrable into automatic processing lines CUTTING PROCESS The product is continuously fed into the FAM ILC-3D and guided towards the cutting unit. In a typical cubing configuration, the product passes through a sequence of elements that perform the necessary cuts in different planes, ultimately producing cubes of regular dimensions. The final size and geometry depend on the combination of blades, cutting guides, and transverse cutting elements installed in the machine. It can be used for: Cubing in 3 dimensions Cutting into strips Uniform product cutting Pre-processing before cooking or blanching Itodozxlgqspfx Adlel Preparation for IQF freezing Preparation for canning Dosing and subsequent packaging APPLICATIONS Particularly suitable for fruit and vegetable processors, canning companies, frozen food manufacturers, and producers of prepared meals who need to obtain uniform cuts on an industrial scale. Depending on the tooling and the characteristics of the product, it can process potatoes, carrots, onions, fruits, vegetables, and other food products suitable for mechanical cutting. The FAM ILC-3D offers a versatile solution for industrial lines where continuous cubing, uniformity of the final product, and the ability to adapt cutting dimensions using different blade sets are required. Machine available for inspection. Additional technical information, dimensions, blade configurations, additional photographs, or videos can be provided upon request.

Condition: like new (used), Year of construction: 2021, operating hours: 300 h, Prices upon request XG x 2800 5x Ca E200L 4x CA Dc 40 e The system was used for only 90 days and is in as-new condition. The XG-X2800LJ is a 2D/3D laser profile sensor from the LJ-V7000 series by KEYENCE Germany. This advanced image processing system offers enhanced features and flexibility for demanding inspection applications. Technical Data: Laser Scanner / Profile Measurement: The XG-X2800LJ is specifically designed for profile measurement and 2D/3D image processing. Compatibility: It is compatible with line-scan cameras, LJ-V sensors, and 21-megapixel cameras. Flowchart-Based Programming: The XG-X is intended for advanced users, enabling programming in a flowchart style. Manuals and Software: User manuals and software are available for configuration and customization via PC, as well as for remote control and capturing images and results on a PC. Please note that any shown accessories are for illustrative purposes only and may not be included with the product. For more information, please visit the official KEYENCE website. If you have further questions or require assistance, I am happy to help! Iedor Rddzjpfx Adljtl

Condition: used, Year of construction: 2007, operating hours: 70,859 h, machine/vehicle number: 15145361464, Travel ranges (X/Y/Z): 3,600/920/820 mm, with B-axis and integrated NC table, maximum spindle speed: 18,000 rpm, tool interface HSK-A63, 30-position tool changer, pendulum machining, control system SIEMENS Sinumerik 840 D Powerline, chip conveyor, emulsion separator, infrared measuring probe. The customer must ensure that drilling emulsion/lubricants are professionally extracted and disposed of. Ijdpozqy Umjfx Adljtl

Condition: used, Year of construction: 2004, operating hours: 1,45,113 h, machine/vehicle number: IntNr231565, For sale: Highly dynamic CNC production turning center Gildemeister Speed 12-5 with IEMCA Smart 316 bar feeder Year of manufacture: 2004 Control: Fanuc 16i-TB Technical data MAIN SPINDLE - Max. bar diameter: 12 (15) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (15) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: - Tool drive power: 1.1 kW - Max. speed: 6,000 rpm Tools: - Number of tools: up to 20 (some driven) Itjdszx Ru Hopfx Adljl - Driven tools: 4–6, for milling, drilling, and threading operations - Tool holder: ER collet chucks or similar systems - Rear machining: 4 stations for backworking IEMCA Smart 316 / 32L bar feeder Year of manufacture: 2006 Bar diameter: 5–32 mm Bar length: 3,200 mm Small extinguishing system / Kraft & Bauer fire suppression system Operating manual Parts separator Chip conveyor system The machine can be inspected under power by appointment. Subject to technical changes and errors, as well as prior sale!

Condition: used, Year of construction: 2004, operating hours: 67,991 h, spindle bore: 92 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, bar passage: 92 mm, CNC universal lathe Gildemeister CTX 520 linear V3 | Year of manufacture: 2004 | C-axis & driven tools For sale is a CNC universal lathe from the manufacturer Gildemeister (DMG), model CTX 520 linear V3. This machine, manufactured in 2004, is equipped for complete machining and features a C-axis, driven tools, and a tailstock. General machine data * Manufacturer: Gildemeister Ijdpfx Adozyp Aljljtl * Model: CTX 520 linear V3 * Year of manufacture: 2004 * Serial number: 02280000301 * Operating hours: 67,991 h * Spindle hours: 16,244 h Control system * Type: SIEMENS 840D powerline * User interface: ShopTurn Spindle & clamping devices * Max. speed: 4,000 rpm * Hydraulic collet chuck * Draw tube inner diameter: max. 92.5 mm * Clamping force: 100 kN (at P max. 80 bar) * Partial collet chuck Equipment * C-axis * Tool drive for driven tools * Sauter disc turret * Tailstock * Chip conveyor From an insolvency proceeding, sale via free sale. Offer deadline: September 30, 2026, 6:00 PM. Package price possible for multiple machines from this proceeding. Inspection: September 16, 2026, 10:00 AM – 12:00 PM, Fraunhoferstraße 10–12, 04178 Leipzig. Collection: October 6, 2026, 9:00 AM – 4:00 PM. Further information and offer submission can be found on our IKV Fester GmbH homepage under Auctions.

Condition: ready for operation (used), Siemens 6SL3210-1SE21-8UA0 Sinamics Power Module 340, serial number XABD05-005099, used, in good condition, 100% functional, scope of delivery as shown in the photos. Isdoz Ax A Tepfx Adlotl

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Number of axis: 3 Reach: 1300 mm Payload: 4 kg X = 300mm Y= 1000mm Isdpfx Aox Urvtsdljtl Z=1300mm

Condition: excellent (used), FAM ILC-2 Linear Dicer / Slicer – Stainless Steel The FAM ILC-2 industrial dicer/slicer is designed for continuous and precise cutting of food products into dice, strips, slices, and other formats, depending on the installed blade and accessory set. Manufactured by FAM, a specialist in industrial cutting systems, the ILC-2 uses a multi-stage cutting process to obtain pieces with regular and repeatable dimensions. It is particularly suitable for processing lines that require high cutting uniformity and continuous production. Its construction primarily in stainless steel, continuous feed, and robust cutting system allow it to be integrated into professional processing lines for fruits, vegetables, and other food products. MAIN FEATURES -Manufacturer: FAM -Model: ILC-2 -Type: Industrial linear dicer/slicer -Application: cutting and size reduction -Automatic and continuous processing -Multi-stage cutting system -Configurable for different cutting dimensions -Production of dice/cubes -Option for strips and other formats depending on tooling -Continuous feed system Itsdpfx Asznaqcsdlol -Interchangeable blade sets -Construction primarily in stainless steel -Driven by an electric motor -Protected cutting chamber -Robust design for industrial production -Access for cleaning, maintenance, and blade changes -Integrable into automatic processing lines CUTTING PROCESS The FAM ILC-2 receives the product and guides it towards the various cutting elements of the machine. Depending on the installed tooling, the product passes through successive cutting stages. In a typical dicing configuration, the system performs the necessary cuts in different planes until dice with regular dimensions are obtained. The final size and geometry depend directly on the configuration of blades, slice guides, and installed cutting elements. It can be used for: Dicing Strip cutting Slice cutting Uniform size reduction Product preparation before cooking Preparation for IQF freezing Pre-packaging preparation APPLICATIONS Particularly suitable for fruit and vegetable processors, manufacturers of frozen products, canneries, and producers of prepared meals that require uniform industrial cutting. Depending on the installed tooling and the characteristics of the product, it can be used for potatoes, carrots, onions, fruits, vegetables, and other food products. The combination of FAM technology, ILC-2 model, continuous cutting, and interchangeable tooling provides a versatile solution for industrial cutting and dicing lines. Machine available for inspection. Additional technical information, dimensions, blade configuration, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2006, Milling machines Travel distance X: 500 mm Travel distance Y :450 mm Travel distance Z: 400 mm Number of axis: 5 milling machine / machining center Iedozwqvhepfx Adlstl Control: Heidenhain iTNC 530 table size X: 500 mm table size Y: 380 mm tool changer: 30 - time control Heidenhain Machining center - Universal Rotary table (B / C axis) Swivel milling head (B axis) HSK63 tool holder Cooling unit Rotary table: C-axis +/-360°, B-axis 108° Max. table load: approx. 500 kg Speed range - main spindle: 20 - 18,000 rpm Feed rates: 20 - 50,000 mm/min Machine weight approx.: 6.0 tons Machine dimensions approx.: 3.8 x 3.2 x 2.5 meters

Condition: ready for operation (used), Gildemeister CNC lathe Itodpfx Ajzu R E Dsdlol Model CTX 320 Linear Year : 2003 Working length : 600 mm. Max. working diameter : 245 mm. Spindle speeds : 6000 rpm. Spindle bore 80 mm Spindle speeds on the Sub spindle : 4000 rpm. Spindle borer : 65 mm. Number of tools : 12 pcs. No. of rotating stations : 12 pcs. Spindle speeds rotating tools : 5000 rpm. X-axis travel : 160 mm. Z Travel : 450 mm. Y-axis travel : +/- 35 mm. Control : Siemens Cycle hours : 29000 Equipped with : -Subspindle -ECO LM 65 loader -2 straight rotating tool -2 angle rotating tool -6 holder -Chuck -Manuals

Condition: excellent (used), Gravity-Fed Linear Filler – Stainless Steel Automatic, gravity-fed linear filler made of stainless steel, designed for the continuous filling of liquid products into bottles, jars, and other rigid containers within industrial packaging lines. The equipment incorporates multiple filling nozzles arranged in a line, allowing for the simultaneous processing of several containers. The product is dispensed by utilizing gravity, providing a simple and efficient solution for low-viscosity liquids and products with good flow characteristics. Its construction primarily in stainless steel, integrated conveyor, and protected filling area make it particularly suitable for professional applications in the food and beverage industry. Iodszxch Sopfx Adljtl MAIN FEATURES -Type: Automatic, gravity-fed linear filler -Filling system: Gravity feed -Linear, multi-nozzle configuration -Simultaneous filling of multiple containers -Automatic container feeding -Controlled positioning under the nozzles -Integrated infeed and outfeed conveyor -Continuous industrial operation -Construction primarily in stainless steel -Product distribution circuit -Enclosed filling area with guards -Hygienic design for the food industry -Compact and robust construction -Integrable into automatic packaging lines PROCESS The containers are automatically transported to the filling area, where they are positioned under the different nozzles. Once positioned, the filling process is carried out using gravity, taking advantage of the height difference and the natural flow of the product to introduce it into the containers. At the end of the cycle, the containers are released and automatically continue to the next stage of the line. This filling principle is particularly suitable for liquid and fluid products with low viscosity. It can be integrated with: Container feeders Feed tanks Transfer pumps Capping and sealing machines Twist-off closing machines Weight checkers Inspection systems Labeling and coding machines Case packers and end-of-line equipment APPLICATIONS Particularly suitable for food industries, beverage manufacturers, canning companies, liquid sauce producers, and packaging companies that need to automate the filling of fluid products. Depending on the installed configuration and the characteristics of the product, it can be used for water, juices, beverages, vinegars, brines, oils, liquid sauces, and other low-viscosity products. Its linear, multi-nozzle configuration, gravity-fed filling, and stainless steel construction provide a versatile solution for industrial packaging lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.