Used Lloyd Motorenwerke Bremen for sale (724)

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 1,460 h, load capacity: 4,000 kg, lifting height: 3,100 mm, fuel type: gas, mast type: simplex, construction height: 2,300 mm, fork length: 1,600 mm, drive type: Treibgas, LPG Forklift Mast type: Standard Transmission: Automatic Condition: Operational and fully functional Technical condition: Very good Podpfx Agox U Hb Do Tspp Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Description: Price includes new safety inspection (UVV), NEW paintwork. We are happy to arrange cost-effective transport for you. Hire purchase possible! We are an official partner of Jungheinrich Germany. Sideshift, 3rd valve, rear work lights, front work lights, heater, full cabin, CE certificate, Multi-lever control

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,765 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,450 mm, fuel type: diesel, mast type: triplex, construction height: 2,100 mm, fork length: 1,200 mm, drive type: Diesel, Diesel Forklift ISO Class: ISO Class 2 = 1,000 – 2,500 kg Mast type: Triplex Transmission: Hydrostatic Technical condition: Good Front tyres type: Superelastic Front tyres condition: 40 – 60 % Rear tyres type: Superelastic Rear tyres condition: 20 – 40 % Podpfx Agjyiv Dpj Tspp Description: Price includes new UVV safety inspection and new paintwork, hydrostatic drive. We can arrange cost-effective transport for you. Hire purchase possible! We are an official partner of Jungheinrich Germany. Sideshift, 3rd valve, 4th valve, rear working light, front working light, half-cab, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,292 h, load capacity: 2,500 kg, lifting height: 4,000 mm, fuel type: electric, mast type: simplex, construction height: 2,640 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Standard Transmission: Automatic Condition: Refurbished without warranty Technical condition: Very good Front tire type: Superelastic Front tire condition: 20 - 40% Rear tire type: Superelastic Rear tire condition: 20 - 40% Battery voltage: 80V Battery capacity: 775Ah Battery year of manufacture: 2019 Battery condition: 80 - 100% Description: Price includes new UVV safety inspection, paintwork in very good condition, 4x superelastic tires will be replaced, 2019 battery will be regenerated using a power cycler including Kappa test 92% (see last picture), charger included with suitable plug. We can also arrange affordable shipping. Leasing with purchase option available! We are an official partner of Jungheinrich Germany. Pedpex Axafsfx Ag Topp Sideshift, rear work light, front work light, half-cab, load backrest, safety light, mini levers, PVC doors.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 4,359 h, load capacity: 1,600 kg, lifting height: 4,500 mm, free lift: 1,450 mm, fuel type: electric, mast type: triplex, construction height: 2,120 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Triplex Transmission: Automatic Pedjxzvx Aepfx Ag Tepp Condition: Refurbished without warranty Technical condition: Very good Front tyre type: Super elastic Front tyre condition: 80 - 100% Rear tyre type: Super elastic Rear tyre condition: 80 - 100% Battery voltage: 48V Description: Price includes new UVV inspection, NEW paintwork. The battery (inspection date: year of manufacture 2020) will be regenerated using a power cycler including a Kappa test. A new battery can be purchased for an additional EUR 3,500 net (offer valid only with forklift purchase). Compatible charger with plug included. We are happy to organise economical transport for you. Lease purchase available! We are official partners of Jungheinrich Germany. Sideshift, 3rd valve, rear work lights, front work lights, full free lift, CE certificate,

Condition: good (used), Year of construction: 2011, functionality: fully functional, Available from June 2026 Baler Presto HPK 50 BS, year of manufacture 2011, with Whirbulator and optional Horstmann chain belt conveyor Manufacturer: Presto Model: HPK 50 BS Year of manufacture: 2011 Drive: 30 kW Pressing force: 50 t Feed opening: 1600 x 1050 mm (L x W) Channel cross-section: 700 x 1100 mm Maximum feed volume: 1.23 m³ Cycle time: 19 s Tying: 4-fold Throughput capacity at 35 kg/m³: 6 t/h Psdjyub Drspfx Ag Topp 60 kg/m³: 9.6 t/h 100 kg/m³: 13.9 t/h Bale weight: up to 500 kg Machine dimensions: 8500 x 1700 x 2400 mm (LxWxH) Machine weight: approx. 12,000 kg Chain Belt Conveyor Data Manufacturer: Horstmann Model: PK 1100/11 Year of manufacture: 2011 Belt width: 1100 mm Speed: approx. 0.2 m/s (max. 0.3 m/s) Feed length: approx. 3000 mm Incline section: approx. 5000 mm Gooseneck: approx. 1000 mm The baler is still in operation and can be inspected under working conditions. It will be available from early June 2026. Please note: All technical data is based on information from the manufacturer. We do not assume any liability for the specifications provided or for any errors. This offer is subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,769 h, load capacity: 5,000 kg, lifting height: 5,080 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,500 mm, fork length: 1,800 mm, drive type: Elektro, Electric 4-wheel forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: triplex Transmission: automatic Condition: refurbished, without warranty Technical condition: very good Front tires type: non-marking Front tires condition: 80 - 100% Rear tires type: non-marking Rear tires condition: 20 - 40% Battery voltage: 80V Battery capacity: 930Ah Ppsdpjyt Tiwofx Ag Tjp Battery year: 2020 Description: Price includes new UVV (safety inspection). 4x superelastic front tires very good / rear will be renewed. The 2020 battery will be regenerated with a power cycler including Kappa test. Suitable charger with plug included. We are happy to organize cost-effective transport for you. Leasing with option to buy possible! Sideshift, fork positioner, 3rd valve, 4th valve, rear work lights, front work lights, heater, full cabin, full free lift, CE certificate, Mini lever, overhead guard roof,

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 837 h, load capacity: 1,400 kg, lifting height: 4,300 mm, free lift: 1,300 mm, fuel type: electric, mast type: triplex, construction height: 1,900 mm, fork length: 1,190 mm, drive type: Elektro, High-lift stacker Mast type: Triplex Transmission: Automatic Condition: As new Technical condition: Very good Front tires type: Polyurethane Front tires condition: 80 - 100% Rear tires type: Polyurethane Rear tires condition: 80 - 100% Battery voltage: 24V Battery capacity: 375Ah Description: Price includes new UVV inspection, new paintwork, NEW Exide battery year 2026, compatible charger with plug. We can arrange economical transport. Lease-purchase possible! We are an official partner of Jungheinrich Germany. Full free lift, CE certificate, Ppedpfsx Aw U Usx Ag Top

Condition: used, functionality: fully functional, operating hours: 962 h, load capacity: 1,400 kg, lifting height: 2,500 mm, fuel type: electric, mast type: simplex, construction height: 1,700 mm, fork length: 1,190 mm, drive type: Elektro, Double-deck stacker Mast type: Standard Transmission: Automatic Condition: Refurbished without warranty Technical condition: Very good Front tires type: Polyurethane Front tires condition: 80 - 100% Rear tires type: Polyurethane Rear tires condition: 80 - 100% Battery voltage: 24V Battery year: 2020 Ppsdpsxy Au Ijfx Ag Tsp Battery condition: 60 - 80% Description: Price includes new UVV safety inspection, paintwork in very good condition, the battery has been regenerated with a Power Cycler including a Kappa Test 71%, suitable charger with plug, integrated scale, electric steering. We are happy to arrange affordable transport for you. Leasing option available! We are an official partner of Jungheinrich Germany. CE certificate, scale, electric steering

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 6,062 h, load capacity: 2,000 kg, lifting height: 4,400 mm, free lift: 1,350 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Mast type: Triplex Transmission: Automatic Technical condition: Very good Front tires type: Non-marking Front tires condition: 80 - 100% Ppodpsyt Tiqjfx Ag Tjp Rear tires type: Non-marking Rear tires condition: 60 - 80% Battery voltage: 48V Battery year: 2019 Battery condition: 80 - 100% Description: Price includes new safety inspection (UVV), NEW paintwork, battery from 2019 will be reconditioned with Power Cycler and Kappa Test 82% (see last picture), charger included with appropriate plug. We are happy to organize cost-effective transport. Leasing with purchase option available! Sideshift, fork positioner, 3rd valve, 4th valve, roof cover, full free lift, CE certificate.

Condition: good (used), Year of construction: 2017, functionality: fully functional, Baler Dixi 80 SLD with lifting/tipping device, semi-automatic, year of manufacture 2017 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2017 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Throughput capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500–600 kg Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: paper, cardboard, film The baler is in good condition. It has been checked and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data is based on manufacturer specifications. We accept no liability for the information provided or for potential errors. This offer is subject to prior sale and change without notice. Inspection is possible by arrangement. Ppodpfsyt Hl Sjx Ag Tsp Sale is ex works, advance payment, without warranty or guarantee.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 4,298 h, load capacity: 2,000 kg, lifting height: 4,500 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,100 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Automatic Condition: Refurbished without warranty Technical condition: Good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 60 - 80% Battery voltage: 48V Battery capacity: 750Ah Battery year: 2026 Description: Price includes a new UVV inspection and new paintwork, brand new EXIDE battery (2026 production, incoming), suitable charger with plug included. We are happy to arrange cost-effective transport for you. Lease-purchase available! We are an official partner of Jungheinrich Germany. Sideshift, 3rd valve, rear work lights, front work lights, full free lift, CE certificate, Ppsdex U Hbwepfx Ag Tep

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 1,329 h, load capacity: 3,000 kg, lifting height: 4,000 mm, fuel type: electric, mast type: simplex, construction height: 2,640 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Automatic Condition: Refurbished without warranty Technical condition: Very good Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Rear tyre condition: 60 - 80% Battery voltage: 80V Battery year: 2020 Description: Price includes new UVV inspection and new paintwork. The battery is reconditioned using a power cycler, including Kappa test. Suitable charger with plug is included. We are happy to organise cost-effective transport for you. Leasing with option to buy is possible! We are official partner of Jungheinrich Germany. Sideshift, Pjdpsxzvyajfx Ag Tspp 3rd valve, rear work lights, front work lights, partial cabin, CE certificate, safety light,

Condition: used, Year of construction: 2020, turning diameter 380 mm turning length 511 mm control Mazatrol SmoothG turning diameter over slide 276 mm max. swing diameter over bed 675 mm Standard machining diameter 276 mm bar material dia. 65 mm x-axis 234 mm rapid traverse X-axis 30 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 26 KW 22 KW Max. Torque 465 Nm turning speeds 6000 U/min Main drive power 11 KW Max. Torque 90 Nm Milling spindle speeds ( driven tools) 35-6000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20x2,5 Switching time one turret station ca. 0,20 sec coolant tank 180 l connected load 46,2 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 2,7 x 1,9 x 1,9 m incl. the following accessories: - Signal light (3-colour LED), rectangular - High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/mechanical flange 98mm - Preparation for bar feed - Robot interface (Advance/Profibus) - Chip conveyor with low ejection height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preliminary use of a hollow clamping cylinder on counter spindle - Hollow clamping device incl. draw tube + cylinder - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Changing device for collet chuck STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device on the chuck on the counter spindle Use of linear systems with guide carriage USB connection (1 connection) Set of manuals in electronic form on CD C-axis main spindle Input accuracy 0.0001° Spindle positioning counter spindle without C-axis Input accuracy 0.001° Tool turret with 12 stations VDI, Operator door with locking switch Double foot switch for both main and counter spindle Hydraulic pressure interlock Fully enclosed work area Work area lighting Safety precautions in accordance with global standards High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Automatic opening/closing of the chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (lateral) Synchronisation of main and counter spindle Synchronised tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (600 variables) EIA/ISO input function Optional stop (optional stop) Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN SD memory card I/F Pedpfotugggex Ag Tepp - Second-hand machine without warranty - All dimensions, weights and performance specifications are non-binding

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN Podpfx Ajvvnfuog Tspp documentation various tool holders Machine vice etc.

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' Ppjdpov Dxw Refx Ag Top spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5000 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: used, turning diameter 340 mm turning length 575 mm control Mazatrol SmoothEZ max. swing diameter over bed 695 mm Standard machining diameter 235 mm bar material dia. max. 65 mm x-axis 215 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 10 m/min z-axis 605 mm rapid traverse Z-axis 30 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 15 KW 11 KW Max. Torque 167 Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (40%ED) ca. 7,5 KW Power (continuous operation) 5,5 KW Max. Torque 53 Nm Milling spindle speeds ( driven tools) 20 - 4500 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Ppsdpfx Agjwngkle Tep Tap- Ø M20 coolant tank 225 l Chuck diameter main spindle 8 '' Chuck diameter counter spindle 6 '' w-axis 585 mm rapid travel W 30 m/min c-axis 555 weight of the machine ca. 4,9 t dimensions of the machine ca. 2,8 x 2 x 1,8 m Special accessories: - Chip conveyor, hinged belt, side ejector - Production package, this package includes Preparation for bar feed Automatic parts catcher (Ø:80mm x L:120mm x 2.5 kg) 15 bar high-pressure coolant system Preparation for chip conveyor (lateral) Signal light (3-colour LED), rectangular C-axis counter spindle 0.0001° Automatic tool eye 8" power chuck Kitag. BR08 & Cyl. SR1566C (HD1) GENERAL MACHINE OPTIONS Air blowing device on the chuck (counter spindle) Transformer for the European market Linear roller guides SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB - Memory Interface (1 slot) CE marking CE marking, metric, 50 Hz Counter spindle positioning 0.0001 degrees without C-axis Tool turret with 12 stations Y-axis control ADDITIONAL PROCESS SOFTWARE Smooth restart function / restart mode Set of manuals in electronic form on CD Main spindle motor AC 15 kW (20 hp) 2nd spindle motor AC 7.5kW (20 hp) Main spindle motor AC 7.5kW MAIN SPINDLE C-axis main spindle Input accuracy (contour/index) 0.0001° Mazak standard colour (F white(fine)/S black) Automatic switch-off via circuit breaker trip Double foot switch Hydraulic pressure interlock RFID door interlock Safety foot switch with locking mechanism Safety measures according to worldwide standard Work area lighting Complete coolant system Automatic opening/closing of chuck jaws (main and counter spindle) Feedback of the chuck status (main and counter spindle) Feedback of the chuck status via sensors. 8" power chuck 6" power chuck (counter spindle) Absolute positioning system Synchronous tapping with milling spindle Relocation Detector NC control Mazatrol SmoothEz 15" colour Lcd (touch screen) User macro (common variables: 600 pairs) EIA/ISO package EIA/ISO - input function EIA/ISO - additional functions Bolt line interpolation 3D tool compensation Workpiece coordinate rotation Geometric function Scaling External data input/output Tapping function (G33) Reverse feed rate G93 G37 Tool length measurement Polar coordinate input (EIA) Optional stop Additional workpiece coordinate systems 300 pieces User macro (600 variables) Mazak tapping/drilling cycle EIA/ISO - input function Scaling External data input/output Thr...

Condition: used, Year of construction: 1986, L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Podpfx Agot D Nz As Tjpp Hydraulic Section Shear - Combined

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting Podpfx Ajtuggcjg Tepp SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: used, Year of construction: 2012, turning diameter 203 mm turning length 300 mm control Mazatrol Smart Distance spindle end - turret 99-434 mm max. turning diameter 280 mm bar material dia. 51 mm travel -x axis 200 mm travel -z axis 340 mm spindle turning speed range 35 - 6000 U/min rapid traverse X-axis 33 m/min rapid traverse Z-axis 36 m/min spindle bore 61 mm Tool turret 12 -fach turning tool - shaft cross cut 20 Boring bar- Ø 32 mm workpiece weight 150 kg spindle nose A2-5 taper in tailstock-quill MK4 Travel- tailstock 350 mm total power requirement 16,3 kW weight of the machine ca. 3,5 t dimensions of the machine ca. 1,9 x 1,6 x 1,8 m Special accessories: Autom Tool Eye Spindle orientation Signal light Additional coolant nozzles above the chuck Automatic switch-off Interface for bar feed Automatic parts catcher Ø 51 x L:100 x 2.5 kg Workpiece conveyor for automatic parts catcher with workpiece tray Chip conveyor, side ejection Psdpfoynbd Ejx Ag Topp Includes: Automatic short bar loading magazine LNS QUICK LOAD SERVO 80_S2 Diameter range: 6 - 80 mm round and hexagonal material Bar lengths: 350 - 1600 mm, however max. headstock length /UVV Weight max. 67 kg / bar Burr-free bars or bar sections Depth 600 mm for holding bars Input voltages from 200 – 460 volts / operating voltage 24 V DC, LNS control programmed on SIEMENS STEP 7 PLC, flexible control panel with large screen, user guidance via symbols for easy operation and adjustment. Device cover with 2 viewing windows made of Plexiglas.

Condition: used, saw blade diameter 560/660/710 mm cutting diameter 170/220 mm cutting range B:1000/1250 x H 220/120 mm cutting speed 7- 48 m/min clamping devices hydraulic pneumatic 20- 315 mm dimensions 2,9 x 2,2x 1,95 m weight of the machine ca. 2,8 t Used plate saw - part fixures Podpfx Agoxnc U Rj Tepp - new security componens - external control panel - long cut 1250 mm/ hight 120 mm possible with removed miter stop

Condition: good (used), Year of construction: 2020, functionality: fully functional, Just arrived Baling Press Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-fold, manual Ppedoygk Hgepfx Ag Tsp Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Please note: All technical data is based on the manufacturer's information. We do not accept any liability for the information provided or for possible errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by appointment. Sale ex works, advance payment only, without warranty or guarantee.

Year of construction: 2011, condition: used, Condition: used Location: external storage Type: MRPX 810CA-SK Year of manufacture: 2010 Max. bowl speed: 6,250 rpm Motor speed: 1,500 rpm Internal bowl diameter: 438 mm Min./Max. process temperature: 0 / 100°C The separator is offered without the "bowl"; this can be purchased separately from Alfa Laval for €60,000. The separator is in as-new condition and has zero operating hours. Pjdpfx Ageyr I Raj Tepp Full documentation is available. Product data Overall height: 2,005 mm Overall length: 2,450 mm Overall width: 1,305 mm Remarks The fully hermetic separation system MRPX 810 is designed for the removal of suspended solids with particle sizes from approximately 0.5 to 500 μm from a liquid phase with lower density than the solids. The solids content is typically in the range of 0.1–20 vol.-%. The main applications are bacteria, rDNA products, enzymes, cell cultures, and vaccines. It is also suitable for industrial fermentation processes using microbial cells for the production of acids, chemicals, fuels, etc. Applications requiring low oxygen uptake can also benefit from the hermetic design features of the MRPX 810 separator.

Condition: excellent (used), Year of construction: 2019, operating hours: 141 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus B, year of manufacture 2019 Ppedpfx Aoyr Dp Eeg Tjp Technical specifications: Manufacturer: HSM Model: V-Press 860 plus B Year of manufacture: 2019 Operating hours: 141 Pressing force: 60 t Drive power: 4 kW Filling opening: 1500 x 651 mm Filling height: 1129 mm Bale size: approx. 1500 x 1200 x 780 mm Bale weight: 550 kg Binding: manual Theoretical cycle time (idle): 25 s Theoretical output: 32.5 m³/h Dimensions: 2099 x 1245 x 2985 mm (W x D x H) Weight: 2340 kg Materials: Film, paper, cardboard Please note: All technical data is based on manufacturer information. No liability is assumed for the accuracy of the data or possible mistakes. All offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment term is 100% advance payment.

Condition: used, Year of construction: 2008, operating hours: 50,500 h, clamping force: 700 kN, Used injection moulding machine Manufacturer: Engel Model: VC200/70 Tech Year of manufacture: 2008 18 mm screw 50,500 operating hours Clean room Full technical details: see last image Location: Germany - Erzgebirge ____ Our General Terms and Conditions (GTC) apply. The seller accepts no liability for typographical or data transmission errors. Pjdjyxd R Rspfx Ag Topp The appearance of the items offered corresponds to their age and the images shown. The technical condition and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial buyers and without warranty.

Condition: excellent (used), Year of construction: 2019, operating hours: 433 h, functionality: fully functional, Vertical baler HSM V-Press 860 plus, year of manufacture 2019 Technical specifications: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2019 Operating hours: 433 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time (idle): 25 s Theoretical press capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: Film, paper, cardboard, punching waste, textiles, big bags, polystyrene Remarks: The baler is in very good condition. Please note: All technical specifications are based on the manufacturer's information. We accept no liability for the accuracy of the data provided or for any errors. Ppedpsyrngnjfx Ag Tjp Offers are subject to change, prior sale reserved and may be withdrawn at any time. Inspection by appointment possible. The sale is ex location, without warranty or guarantee. Our payment terms are 100% advance payment.