Used Kleingebindewannen Kl for sale (3,731)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, throat depth: 180 mm, pressing force: 5 t, table width: 450 mm, table length: 320 mm, operating speed: 300 mm/s, overall weight: 270 kg, type of input current: three-phase, oil tank capacity: 9 l, Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Nkodpfsvbdpyex Ah Rew Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Condition: used, Punching Machine MUHR & BENDER - MUBEA Type KL 350 / 203 Machine No. Year of manufacture 19 Punching force 35 tons Throat depth 203 mm Ram stroke 22 mm Capacity Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate 117 x 70 mm Table plate 175 x 100 mm, thickness 100 mm Nsdpeyvvkwefx Ah Rjkw Drop-through opening in table cutout Ø 56 mm Stroke release Single stroke via foot switch Motor power 1.5 kW Power supply 400 Volt, 50 Hz - Electric foot switch for stroke release - Manual lever positioning device for punch movement - Equipped with a Ø 8 mm punching tool - Support tables approx. 270 x 230 mm each on left and right of punching unit - Metal base frame Space requirement L x W x H 750 x 720 x 1500 mm Weight 430 kg In very good condition

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Nkedpfx Ahoxf Utas Rjw Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Year of construction: 1997, condition: used, Built in 1997 Pile height 400 mm section height max 250 mm Infeed height 700 bis 1.300 mm Delivery height 890 mm Nkedpfx Aoc Rhr Seh Rew Speed max 60.000 Ex./h Weight 980 kg (approx.)

Condition: good (used), Size: Nksdjg Du Aujpfx Ah Row max 500 x 330 mm min 140 x 150 mm Product thickness: side 4-96 Seiten Speed: max 100.000 Ex./h Pile height 300 mm Infeed height 500-1920 mm Delivery height 890 mm Power requirements 2 kW (220/380V, 50Hz) Length 3077 mm Width 894 mm Height 1835 mm Weight 960 kg (approx.)

Year of construction: 1997, condition: used, Built in 1997 Size max 660 x 1.020 mm Equipment feeder: • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife Nkedjdmdt Uepfx Ah Row • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife • polyurethane-steel folding rollers delivery: • belt delivery

Condition: good (used), Rebuilt: 2011 Size: max 560 x 1.600 mm Size with flatpile feeder: max 560 x 920 mm, min 150 x 200 mm Size cross fold: min 150 x 200 mm Size threefold: min 200 x 300 mm Speed: max 180 m/min Power requirements: 3,85 kW (220/380V, 50Hz) Length with flatpile feeder: 3.440 mm Width: 1.500 mm Weight with flatpile feeder: 1.850 kg (approx.) Equipment: Feeder: • flat pile feeder • MCC-control • Vacutable • Vaculift • Vacubelt Nodpfjl Dpc Ejx Ah Rskw • counter 1st parallel folding unit: • 6 buckle plates 1st cross-fold unit: • cross fold knife 2 nd cross fold unit: • cross fold knife left peripheral units and deliveries: • delivery A 56

Condition: used, Year of construction: 2003, machine/vehicle number: KL 77/A20/S2, functionality: fully functional, feed rate X-axis: 20 m/min, total length: 9,000 mm, Equipment: documentation/manual, We are offering this used HOMAG Optimat kL 77/A20/S2 EVENT edge bander, year of manufacture 2003. Manufacturer: HOMAG Model: Optimat kL 77/A20/S2 EVENT Year of manufacture: 2003 Condition: used Type: edge bander Nkodpfx Ahoyw N Ape Row Edge bander for sale due to purchase of a new machine. The machine is currently still in use and fully operational. It is a very robust machine, including a return system. Very stable and always delivers a perfect finish! Equipment: - Nozzles - Format cutters, 100mm diameter - Blow-off unit - Preheating unit - PUR bonding with cartridge heating station - 7 pressure rollers - Crosscut saws, straight and mitre - Top and bottom roughing cutters - Profile cutters, radius 1/2mm - Profile/flat scrapers - Nozzles - Polishing brushes - Machine equipped with top and bottom belts (very stable design) - Height adjustable at the front (automatic) - Profile cutters automatically adjustable via the program - Crosscut saws automatic - All functions can be switched on/off via the front screen - Return conveyor operated from the PC ->Demo available upon request! Price to be discussed via private message. Please do not hesitate to contact me if you have any questions. If you have any questions or require further information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2005, Gluing unit Motorized height adjustment Homatic NC 21 control unit Frequency converter Nsdpfxoyvy D Is Ah Rjkw A20 hot melt adhesive unit for roll material up to 3 mm and strip material up to 20 mm edge thickness End trimming unit (two motors) Feed control LCD flat panel display Feed rate 18.5 m / min ? Feed rate steplessly adjustable 8–24 m/min or 12–24 m/min Minimum working width 55 mm at workpiece thickness 22 mm / 100 mm at workpiece thickness 60 mm depending on workpiece length Workpiece projection 30 mm Workpiece thickness 12–60 mm Workpiece thickness without contour milling and finishing unit min. 8 mm Jointing/milling unit Workpiece preheating A 20 gluing unit / A 34 hot melt adhesive unit Magazine for solid wood edging, strip material, and roll material Roll cutting device Pressure zone KL end trimming unit Release agent spraying device top/bottom Melting unit with granulate hopper instead of glue pot QA glue pot front section, quick-change (for color changes) Pre-milling unit Contour milling unit with interchangeable heads Universal milling unit Automatic multi-trimming unit, complete Finishing unit The illustrated return unit is not included in the scope of delivery. The data were taken from a data sheet and are therefore supplied without guarantee. Exact configuration on request.

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 0-200-24-6287, functionality: fully functional, input voltage: 400 V, input current: 56 A, edge thickness (max.): 20 mm, Equipment: CE marking, Used single-sided HOMAG edge-banding machine for straight edges – KL 78/A20/S2 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2001 SPEZIFICATION & EQUIPMENT: Basic machine with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness max. 60 mm - top pressure with compound V-belt, motorized height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - clamping of glue application unit before rear end of workpiece, for even glue application - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors (clock-wise, counter clock-wise), 2x4kW, jumping function GLUING SECTION A20, consisting of: - QA34 glue application unit, on request with PTFE-coating (Teflon) - Pre-melter for EVA glues - Edge magazine, edge thickness min. 0,4 mm to max. 20 mm Edge width (height) max 65 mm - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 6 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit HL81, 2 motors, with straight/chamfer cutting function motorised fine-positioning of snipping stop - Pre-milling (rough trimming) 1,5 kW, top/bottom - Corner rounding FK13, 2 motors (top/bottom) with automatic 8-fold tool changer and several exchangeable trimming heads - Profile (radius-) scraping MN21, with NC-axis positioning - Flat scraping (glue joint) FA10, top/bottom, (version with 3 tracer rollers) - Straight belt sanding unit KS10 - Buffing unit top/bottom ELECTRONIC CONTROL: Nkodpfx Aheyv Da He Row - HOMATIC NC21 OPERATING SYSTEM

Condition: new, functionality: fully functional, Year of construction: 2021, machine/vehicle number: 2578, - Type: TLH-B-K5-800 - Excavator weight class: 12.0 t - 16.0 t Nodevu Umcjpfx Ah Rskw - Cutting width: 800 mm - Weight: 458 kg - Volume 0.411 m³ - Adapter: MS21

Condition: used, mileage: 43,050 km, power: 81 kW (110.13 HP), first registration: 07/2021, fuel type: diesel, overall weight: 2,800 kg, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,904 mm, total width: 1,904 mm, total height: 1,990 mm, loading space length: 2,200 mm, loading space width: 1,550 mm, loading space height: 1,250 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Internal vehicle no.: 2314 ----Why autonext GmbH? One of the largest commercial vehicle showrooms nationwide. Always over 400 vehicles immediately available at the best prices – the largest selection. More than 1,000 satisfied customers per year – top customer ratings. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Excellent condition! 1st owner, German vehicle, non-smoking vehicle Full service history exclusively at Volkswagen New VW inspection / Next service in 503 days or 33,200 km Near-new front brakes Body: Refrigerated box van for fresh goods Konvekta cooling unit SET-Line FK 2000 F Multi-Function Display Plus Comfort Package Plus Climatic air conditioning Park Pilot System (rear parking sensors) Upon request: Tow bar retrofit available for only €599, and, if possible, increase of towing capacity up to 3.5t ---- Special equipment: * Audio navigation system Discover Media Streaming & Internet (touchscreen, USB) * Voice control system * Multimedia interface with 2 x USB (Type C) in front Nsdpfoxglinjx Ah Rskw * Mobile online services App-Connect wired and wireless * Equipment package: Comfort Package Plus * Grab handles A-pillars * Climatic air conditioning (driver’s cab) * Seat trim/upholstery: 'Bricks' fabric * Seats in driver’s cab: height-adjustable driver’s seat * Seats in driver’s cab: lumbar support for driver’s seat * Interior lighting in driver’s cab: front reading lights * Illuminated glove compartment * Sun visors with mirrors * Power outlets (12V sockets) in driver’s cab (2 units) * Waste bin * Multi-Function Display Plus * Driver assistance system: fatigue detection sensor * Preparation for cargo area refrigeration * Vehicle without lashing eyes * Vehicle without child safety lock in load/passenger compartment * Electrical interface for external use (CAN bus) with terminal * Partition wall in load compartment, high without window * Roof lining "Himmel Komfort" in driver’s cab * Climatic air conditioning (driver’s cab) * Double passenger seat with lockable storage box in the seat bench * Illuminated glove compartment * Driver assistance system: rear parking aid * Rear wing doors without glazing * Truck registration * Emergency call system * "Transporter" badge on fender Standard equipment: Electronic Stability Program (ESP) with brake assist, ASR/ABS, EDS and hill start assist, driver assistance system: hill start assist, deactivatable passenger airbag, driver/passenger airbags, anti-lock braking system (ABS), traction control (ASR), drive type: front-wheel drive, electrically adjustable and heated exterior mirrors, left convex exterior mirror, right convex exterior mirror, rubber flooring in cab, on-board tools, driver assistance system: brake assist (HBA), driver assistance system: multi-collision brake, driver assistance system: cross wind assist, electric windows, laminated safety glass windscreen, 2 folding radio keys, 5-speed transmission, lockable glove compartment, LED lighting in load/passenger compartment, interior pollen filter, body/superstructure: standard box, body variant: standard roof, fuel tank: 70 liters, radiator grille with chrome trim, adjustable steering column, engine 2.0L – 81 kW TDI, rear fog lamp, non-smoker package, digital radio (DAB+), wheelbase 3,000 mm, tire repair kit, diesel particulate filter, low emissions according to Euro 6d-TEMP standard, sliding door load/passenger area right, electro-mechanical power steering, Start/Stop system...

Condition: good (used), mileage: 10,39,495 km, power: 346 kW (470.43 HP), first registration: 03/2017, fuel type: diesel, tire size: 385 / 65 / R22.5, axle configuration: 4x2, wheelbase: 3,800 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, suspension: steel-air, total length: 5,990 mm, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2017, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, fog lights, fridge, parking air conditioner, power mirror, spoiler, General information Cab: Globetrotter Technical information Number of cylinders: 6 Engine capacity: 12.777 cc Transmission Transmission: Volvo I Shift, 12 gears, Automatic Axle configuration Make axles: Volvo Brakes: disc brakes Front axle: Tyre size: 385 / 65 / R22.5; Max. axle load: 7500 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: leaf suspension Rear axle: Tyre size: 295 / 80 / R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 7.485 kg Carrying capacity: 11.515 kg GVW: 19.000 kg Nodpfoytn Nfjx Ah Rekw Interior Interior: grey Number of seats: 2 Environment Emission class: Euro 6c Maintenance APK (MOT): tested until 01/2027 History Number of owners: 2 Condition Technical condition: good Visual appearance: good Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Aluminium fuel tank - Baggage cover - Car kit - Central armrest - Low-noise - Radio - Radio, MP3 enabled - Remote central locking - Speed limiter - Spotlights - Stability control - stand airco - Toolbox - Visor - Webasto

Condition: used, Year of construction: 1992, Falzmaschine / Folding Machine Stahl KC 78/6-KL 16 Seiten Falzmaschine / 16 pages Cross Fold Year 1992 - Serial-No. 4642/92-19602 Arbeitsbreite max. 780mm / Working width max. 780mm Palettenanleger / Pallet Feeder 1. Station 6 Taschen / 1. Folding Unit 6 Buckles 2. Station 2 Schwerter / 2. Folding Unit 2 knives  Schuppenauslage / Stream delivery Stahl SAK Inklusive Kompressor und Handbücher / Included Compressor and Manuals Soft PU Falzen, guter Zustand / Soft PU Rolelr, good condition Vorgelagerte und nachgelagerte Messerwellen / Front mounted and rear mounted slitter shafts Online-Video-Inspection by Skype-Video Nksdpjvkkilsfx Ah Rew We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Pressing force: 560 kN For example, punch a 30 mm hole in 15 mm steel Njdpfxoxz Ep De Ah Rekw Stroke triggering via foot switch Assortment of tools is included in the price

Year of construction: 1998, condition: excellent (used), machine/vehicle number: 66000102, Pallet feeder, Vaculift, Vacubelt, DV Pump, MBO MPC Control, ASP 66 Shingle belt press delivery Machine nr: 66000102 Nodpfehqhgqex Ah Rjkw

Condition: used, Year of construction: 2002, functionality: fully functional, HOMAG Optimat KL79 A20/S2 (2002) – Full Configuration The edge banding line is in satisfactory working condition, fully operational and ready for production. Installed Units: • A20/S2 gluing station (edge thickness up to 20 mm) • Edge feed magazine • Front/rear end trimming units (two saw modules) • Top and bottom trimming units • Corner rounding units (two heads) • Profile scraper units (top/bottom) • Glue joint scraper • Buffing/polishing units • Pneumatic control and vacuum extraction system Nkjdeycg D Tspfx Ah Rjw Technical Data (from manufacturer specifications): • Feed speed: 18–24 m/min • Edge thickness: 0.3–20 mm • Workpiece thickness: 12–60 mm • Minimum workpiece width: 55 mm (22 mm thickness) / 100 mm (60 mm thickness) • Machine length: 10,115 mm • Weight: ~6,200 kg • Power supply: 400 V, 50/60 Hz • Compressed air: 8 bar

Condition: used, Falzmaschine / Folding Machine Heidelberg Stahlfolder KD.2/78-4-KL Year 2001 - Serial-No. 703413/01-298045 Arbeitsbreite max. 780mm / Working width max. 780mm Rundstapelanleger / Round Pile Feeder 1. Station 4 Taschen / 1. Station 4 buckles 2. Station 2 Schwerter / 2. Station 2 knives Schuppenauslage / Stream Delivery SAK Rietschle Kompressor / Rietschle Compressor Nedpfx Ahsx Sxpbe Rskw Inklusive Handbücher / Manuals included Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 3,050 kg, KUKA KRC4 linear axis – a high-precision, robust motion unit designed for industrial applications. Provides accurate control of movement sequences and serves as a central component in automation processes and robotic systems within production environments. Durable construction ensures consistent, reliable performance even under the most demanding conditions. Nkedpjw I Ez Ijfx Ah Rjw Linear Track Model: KL 1500/3T LINEAR UNIT 8 METER Year: 2013 Controller Cabinet: KRC4 Length: 8 meters Condition: USED, well working Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. ( Source: Kuka's Website )

Condition: used, Fieldbus, Profibus, SPS control, automation technology, controls and regulators, bus coupler, logic bus terminal, input terminal -Manufacturer: Beckhoff, bus terminal 4-channel digital input -Type: KL 1904 -Rated voltage: 24VDC -Number: 5x clamp available -Price per piece -Dimensions: 67/15/H100 mm -Weight: 0.1 kg/pc. Nkodpfx Ahshu Ddzo Row

Year of construction: 1969, condition: used, Motor potentiometer, regulator, motor controller, rotary potentiometer -Manufacturer: Kessler, motor potentiometer type P3-173 KL -Distortion Plan: PFN-64 -Rotary potentiometer: Rosenthal P 500 19 Ohm / Rosenthal P 100 470 Ohm -Individual components: see photos -Dimensions: 550/200/H270 mm Nkjdjn Tvbropfx Ah Rsw -Weight: 9.1 kg

Condition: good (used), Year of construction: 1978, Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punching press -Manufacturer: Mubea, hole punch type KL 100 -Printing capacity: 100 tons -Punching capacity: see photo type plate -Thrust: 500 mm -Accessories: incl. see photos Nsdpfx Ahewrn U Hs Rskw -Dimensions: 1460/880/H2100 mm -Weight: 2660 kg

Condition: good (used), Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg Nsdpsik Sl Hsfx Ah Rekw

Condition: excellent (used), Year of construction: 2017, 1 x used compensating stacker Manufacturer: Gämmerler Model: KL540 Lift-Pack, low or high infeed Year of construction: 2017 Nsdpfx Ahjt Ifh Hj Rokw several stackers available! also for cannibalization.

Condition: good (used), The HOMAG KL 78 is a high-performance single-sided edgebander designed to meet the needs of industrial production. With advanced technology and versatile configuration, this machine is ideal for quickly and precisely processing panel edges with excellent quality. Main Features: - Homatic Numerical Control for intuitive and precise operation management. - Grinding Units to ensure perfect surfaces. - Gluing Unit with Pre-Glueing for uniform adhesive application with minimal waste. Nkjdpfx Ahjuh Acae Rsw - Edge Pressure Unit for a stable and durable finish. - Double End Trimmer for fast and precise edge finishing. - Overlapping Double Refiner for smooth and flawless edges on both sides of the panel. - Multi-function Rounder for complete and detailed edge processing. - 0°/90° Milling Group for highly precise and finished edges. - Edge Scraper and Glue Scraper for a flawless cleaning and perfect finish. - Brushes for thorough cleaning and surface finishing. - Available Space for Additional Units for further customization. - Spare Tool Groups for easy and continuous maintenance. With the HOMAG KL 78, every edging operation is made simple and fast, boosting production efficiency without compromising on quality.