Used Maho 1000 C for sale (440)

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 1540501589A, travel distance X-axis: 650 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heidenhain, controller model: Heidenhain TNC 530, table width: 540 mm, table length: 850 mm, spindle speed (max.): 8,000 rpm, number of spindles: 1, number of slots in tool magazine: 30, tool diameter: 40 mm, number of axes: 3, Equipment: documentation/manual, Tool Standard is CAT-40, Attached Accessories: 30 pieces of tool holders, Godpfsyg Dt Tex Af Ajbl Tool Presetter

Condition: excellent (used), Year of construction: 2005, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control SIEMENS Gjdpfx Afjyxxyyo Asbl table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 8.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 20 Pos voltage 380 V total power requirement 35 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 3,50 x 3,50 x 2,70 m - Serial-No.: 15415015634 - Main spindle NEW bearings - Machine ON: 18,484 h Program ON: 9,153 h - SIEMENS control system - With NC sub-unit (4th axis, controlled via M-code) - Chip tray (no chip conveyor) - Coolant system

Condition: ready for operation (used), Year of construction: 2006, operating hours: 11,900 h, travel distance X-axis: 635 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 635 V was manufactured in 2006. It features an X-axis travel of approximately 635 mm and operates on a supply voltage of 400 V, 3-phase. With a rated power of 35 kVA, this vertical machining centre is designed for efficient performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 635 V machine we have for sale. Contact us for further details. • Supply voltage: 400 V, 3-phase + PE • Frequency: 50/60 Hz • Rated power: 35 kVA • Rated current: 64 A • Maximum current: 50 A Gbsdpfx Afeyycu Re Asl • Control voltage: 230 V AC / 24 V DC

Condition: excellent (used), Year of construction: 2008, 5-axis simultaneous DMG DMC60U duoblock Very good condition! Operating hours: 78,000 h Spindle hours since replacement: 5,900 h (2022) 2023: XZ sliding plate replaced The machine can be inspected at any time by arrangement. Control: iTNC530 Heidenhain Travel: X-600 mm, Y-700 mm, Z-600 mm B-axis: -30 / -180° C-axis: 360 ° endless Spindle mount: SK40 Spindle speed: 20 - 12,000 rpm tool magazine: 60 seats Godpfowglnyjx Af Aobl Turntable diameter: 630 mm Pallet size: 630 mm x 630 mm Internal coolant supply (IKZ): 40 bar Belt filter system: Belt filter system equipment: Measuring probe, electric handwheel, documentation, two zero-point clamping systems; Belt filter system: Belt filter system

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Power-on hours: 56,376 Spindle hours: 26,451 Technical specifications: Gbsdpfxsu Rnluj Af Ajl Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Spindle speed: 18,000 rpm Tool holder: HSK 63 Magazine capacity HSK 63: 60 tools Equipment: - 3D trajectory control MillPlus IT - Horizontal double gripper tool changer - Automatic swivel milling head - Rotating safety viewing window - NC rotary table with pallet support - Pallet changer - 2 pallets, 630 x 500 mm - Universal milling head with controlled B-axis HSK 63 (only in combination with HSK 63 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4: Extended manual intervention - Rinsing gun with pump - Tool breakage monitoring HSK 63, mechanical version, range: 63...310 mm / +/- 3 mm - Intermittent operation chip conveyor - Internal coolant supply switchable from 40 bar to 80 bar

Condition: good (used), Year of construction: 2009, Machine will come with robot . Gbsdpfexfu S Nox Af Ael 42.000 rpm

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, number of slots in tool magazine: 120, total height: 2,900 mm, table length: 400 mm, table width: 400 mm, coolant supply: 40 bar, feed rate X-axis: 80 m/min, feed rate Y-axis: 80 m/min, feed rate Z-axis: 80 m/min, rapid traverse Z-axis: 80 m/min, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, spindle speed (max.): 28,000 rpm, spindle speed (min.): 20 rpm, table load: 200 kg, operating hours of spindle: 39,945 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Scope of delivery: - HSC 55 machine - 3R-WorkMaster II pallet changer (automation) with all pallets - High pressure system / belt filter system (DMG) - Refrigeration unit (OLAER) - chip conveyor Excluded from delivery: - Vices - Tool holder Technical data of machine: - See attached OC (order confirmation) Gbodpfxou Ivkgj Af Asl Technical data automation: - Available, on request.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 69,995 h, Control Unit Brand HEIDENHAIN TNC 530 Main Drive Number of axis 3 Movement X-Axis Movement 885 mm Y-Axis Movement 600 mm Z-Axis Movement 600 mm Table Table load 600 kg This 3-axis DECKEL MAHO DMC 75 V Linear was manufactured in 2005. It features a travel range of 885 x 600 x 600 mm and a maximum feed speed of 90 m/min. The machine includes a high-capacity coolant system and an efficient scraper belt conveyor for swarf disposal. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 75 V machine we have for sale. Contact us for more information. Gbedjx D Iuuepfx Af Asl Application Types Milling

Condition: ready for operation (used), Year of construction: 2003, operating hours: 42,368 h, General Data Machine weight 6800 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 12000 Tool taper SK40 Number of axis 3 Movement Gjdpfxox D Ntfo Af Aebl X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm This 3-axis DMG DECKEL MAHO DMC 64 V linear was manufactured in 2003. It features a 640 mm X-axis, 600 mm Y-axis, 500 mm Z-axis, and a table size of 850 x 600 mm. Equipped with a Heidenhain iTNC 530 control unit, SK40 taper, and a tool magazine with 30 tools capacity. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64 V linear vertical machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2006, x-travel 1.250 mm Godpfx Aeyui Ncsf Aobl y-travel 1.000 mm z-travel 1.000 mm Control MillPlus B-axis (head) -10 - +180 x 0,001 ° C-axis (table) 360 x 0,001 ° feed X/Y/Z/-axis 20 - 10.000 mm/min rapid traverse X/Y/Z 60,00 m/min tool taper HSK 100 spindle turning speed - stepless 20 - 10.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 38,00 KW max. torque at 40% / 100% load 288 / 187 Nm table surface area Ø 1.100 mm table load 1,50 t toolpiece magazine: chain magazine 120 Stück tool diameter 110 mm tool diameter with 2 vacant positions 230 mm tool length - max. 500 mm weight of tools max. 30,00 kg rotary table speeds infinitely variable 10 - 500 U/min total power requirement 85,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 9,00 x 6,50 x H3,50m m 5-axis turning/milling machining center with MillPlus IT FD control; dual pallet changer; coolant system; coolant through the spindle; chip conveyor; rotating viewing window; electronic handwheel. Spindle new 10/2025 Turning-table overhaul 2022

Condition: not inspected (used), Year of construction: 1997, functionality: unexamined, machine/vehicle number: 323, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller model: SIEMENS SINUMERIK 840 D, overall weight: 12,000 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates collection within the period from 08/04/2026 to 16/04/2026! TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 560 mm Gedpfxjyk Ulnj Af Aobl Travel Z-axis: 560 mm Travel B-axis: 360° Pallet dimensions: 2 units, 500 x 400 mm MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D Connected load: 60 kVA Operating voltage: 400 V Frequency: 50 Hz Rated current: 90 A Dimensions & Weight Dimensions (L x W x H): 5,000 x 5,000 x 3,000 mm Weight: 12,000 kg External reference: 25

Condition: used, Year of construction: 2008, x-travel 1000 mm y-travel 1000 mm z-travel 1000 mm Control Siemens 840D powerline Godpfxsxcp R Us Af Asbl spindle tunring speed 8.000 U/min drive capacity - main spindle 100/40% ED 32/44 kW tool taper HSK-A 100 number of tool places 354 Pos. rapid traverse ( x / y / z ) 60 m/min size of pallet 800 x 800 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features: - NC rotary table with pallet carrier - Rotary pallet changer - 40 bar internal coolant supply - Rotating viewing window - Wall-mounted magazine with 300 magazine positions - Rotating wall tool lock, 30 positions (inactive) and 54 positions (active) - Infrared measuring probe - SK 50 mechanical tool breakage detector - Tool identification - 4-color signal lamp Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 1997, operating hours: 19,831 h, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, total height: 2,700 mm, total width: 2,800 mm, table load: 500 kg, overall weight: 4,500 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 24, product length (max.): 3,300 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 63V vertical machining centre was manufactured in 1997. It features an X-axis travel of 630 mm, Y-axis travel of 500 mm, and Z-axis travel of 500 mm. The machine is equipped with a tool magazine capacity of 24 tools and a maximum spindle speed of 8000 rpm. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 63V machine we have for sale. Contact us for further details. • Table: • Size: 800 × 500 mm • Operating hours: 19,831 h (actual counter from control) • Condition: Powered, connected, and fully operational • Note: Control upgrade from Sinumerik 810D to 840D Technical Specification Taper Size SK 40 Gsdpfx Ajyw Rmvsf Aobl

Condition: ready for operation (used), Year of construction: 2001, operating hours: 35,241 h, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, overall weight: 9,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 3, This 3-axis DECKEL MAHO DMC 100 V was manufactured in 2001. It features impressive travels of approximately 1000 mm in the X-axis, 800 mm in the Y-axis, and 500 mm in the Z-axis. The machine boasts a maximum spindle speed of around 18,000 rpm and includes a KNOLL chip conveyor and coolant filter system. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 100 V vertical machining centre we have for sale. Contact us for further details. • Control: 1 DECKEL MAHO control unit • Operating hours: 35,241 Gjdpfx Ajyw N A Nsf Aebl Additional equipment • KNOLL 450 K-1/40 chip conveyor (2002) • KNOLL RF 200/1100 coolant filter system (2001)

Condition: used, Year of construction: 2004, operating hours: 38,958 h, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 90 m/min, rapid traverse Z-axis: 90 m/min, feed length X-axis: 750 mm, feed length Y-axis: 600 mm, feed length Z-axis: 560 mm, nominal power (apparent): 73 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, table width: 650 mm, table length: 950 mm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 37,462 h, spindle nose: HSK63, number of slots in tool magazine: 30, input voltage: 400 V, We are offering this used Deckel Maho DMC 75 V linear vertical machining center, year of manufacture 2004. Details: Year: 2004 Program run time: 38,958 hours Spindle hours: 37,462 hours Rapid traverse: 90 m/min Travel range X-750/Y-600/Z-560 mm Spindle HSK63 18,000 rpm Tool magazine with 30 stations Direct path measuring system Table size: 950 x 650 mm Heidenhain iTNC 530 External air blast Rated power: 73 kVA Max rated current Jn: 105 A Gbjdpfsy Dr Hkjx Af Aol Rated current: 125 A Line voltage: 400 V Frequency: 50/60 Hz Secondary voltage: 230 V Auxiliary voltage: 24 V Accessories: WITHOUT accessories such as tool holders and zero-point clamping system. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1539000771E, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, workpiece weight (max.): 1,000 kg, total height: 2,758 mm, total length: 3,137 mm, total width: 3,355 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, rotational speed (max.): 8,000 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 5,039 h, spindle motor power: 13 W, number of spindles: 1, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Under power 24000 EUR Gbsdpfx Asyf E Shof Aol

Condition: excellent (used), Year of construction: 2011, operating hours: 11,000 h, CNC controller: HEIDENHAIN iTNC530 X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360° (0,001°) A-axis degrees: +10° -110° Worktable Table dimensions mm: 400x400 Max. workpiece weight kg: 200 Spindle speed rpm: 42.000 Gbsdpfx Afsyv H I Hj Ael Tool holder: HSK-E50 Tool magazine slots: 60 Electronic Handwheel Infrared probe blowing air through spindle center selectable via M-function Signal lamp NC swivel rotary table 3D quickSET 20-position pallet tower storage and transfer station

Condition: excellent (used), Year of construction: 2010, operating hours: 13,362 h, functionality: fully functional, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 1,035 mm, feed length Y-axis: 560 mm, feed length Z-axis: 510 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, nominal power (apparent): 17 kVA, torque: 83 Nm, controller manufacturer: Siemens 810D, total height: 2,758 mm, total length: 3,137 mm, total width: 3,355 mm, table width: 560 mm, table length: 1,200 mm, table load: 1,000 kg, overall weight: 4,250 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 13,362 h, number of slots in tool magazine: 20, tool length: 300 mm, tool diameter: 80 mm, tool weight: 6,000 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - Year of manufacture: 2010 Gjdsyf Hymspfx Af Aobl - Condition: good, used - Control: Siemens 810D - Table: 1200 x 560 mm - Travels: 1,035 x 560 x 510 mm - Spindle speeds: 20 - 8,000 rpm

Condition: used, Year of construction: 2012, x-travel 635 mm y-travel 510 mm Gsdpfsx S Rxnox Af Ajbl z-travel 460 mm control SLIMline Siemens turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 13 / 9 kW Torque 83 / 57 Nm tool taper SK 40 table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min rapid traverse 30 m/min total power requirement 17 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V Ecoline - only 9.290 Spindle-Hours

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,900 h, General Data Machine weight 6800 Main Drive Spindle speed range 12000 Movement X-Axis Movement 640 mm Y-Axis Movement 600 mm Z-Axis Movement 500 mm Table Outer length 850 mm Outer width 600 mm This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2005. Ideal for precision machining, this vertical machining center offers robust performance and reliability. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64V linear vertical machining center. Contact us for more information. Application Types Milling Gedpfx Afsx Stl Do Aebl

Condition: ready for operation (used), Year of construction: 2008, operating hours: 79,500 h, functionality: fully functional, machine/vehicle number: 11710000713, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, controller model: HEIDENHAIN iTNC 530, workpiece weight (max.): 600 kg, The machine spindle was replaced according to DMG in 2022. A measurement protocol for the machine is included! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 700 mm Travel Z-axis: 700 mm Spindle speed: 18,000 rpm Spindle torque: 110 / 84 Nm Spindle power: 34 / 28 kW Tool holder: SK 40 Tool changer: 180 positions Pallet size: 500 x 500 mm Max. workpiece weight: 600 kg Gsdpfxsyvp Dko Af Ajbl Rapid traverse: 60 m/min MACHINE DETAILS Control: HEIDENHAIN iTNC 530 Total connected load: 68 kVA Dimensions & Weight Space requirements: 9.5 x 7.5 x 3.4 m Machine weight: 10.5 t Operating Hours Spindle hours: 79,500 h Power-on hours: 112,000 h EQUIPMENT NC rotary table RS 10 pallet rotary storage, total of 12 pallet stations iTNC operator panel for the loading station ICS 40 bar (production package) Through-spindle air blast BA 4 2/4 hydraulic clamping for worktable and set-up station BLUM laser (prepared) Oil mist separator TS 649 probe Mechanical tool breakage detection SDS (Spindle Diagnostic System) Rinse gun Electronic handwheel Chip conveyor

Condition: ready for operation (used), Year of construction: 2002, General Data Machine weight 6500 kg Measurements height 2500 mm Dimensions Machine Length 2800 mm Main Drive Number of axis 3 Spindle Speed 8000 RPM Spindle motor power 7.5 kW Movement X-Axis Movement 1000 mm Z-Axis Movement 600 mm Y-Axis Movement 600 mm This 3-axis DECKEL MAHO DMC 103 V was manufactured in 2002. It features a spindle speed of 8000 rpm, a 24-pocket tool magazine, and a robust 6500 kg construction for stability. The compact design allows for efficient use of workshop space, while the high load capacity of 800 kg supports a variety of applications. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 103 V machine we have for sale. Contact us for more information. Gedpfxsx E Ef Ae Af Ajbl Application Types Milling

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 4,500 rpm, Equipment: rotational speed infinitely variable, Dear Sir or Madam, For sale is a 3+2-axis CNC machining center, type Deckel Maho DMU50M. The Heidenhain TNC310 contouring control (also available with Siemens 810D!) makes the DMU a fully-fledged CNC machine for both production and training applications. Due to the absence of a tool changer and the conveniently positioned maintenance doors, the DMU50M requires very little space and can be positioned almost directly against a wall. The machine has been thoroughly tested in our workshop, is therefore in excellent condition, and is ready for immediate use. We look forward to receiving your inquiry! Delivery time: immediately available Machine no. xxxx Year of manufacture: 2002 Control: Heidenhain TNC310 or Siemens 810D (including Shopmill) Table design: Rotary and tilting table Speed: 20-4500 rpm, continuously programmable Feed rate: 0-5000 mm/min, continuously programmable Travel ranges X/Y/Z: 500/400/400 mm Tool holder: SK40 Tightening system: pneumatic Handwheels: 3-axis electronic / B+C axes mechanical Weight: approx. 2800 kg Further equipment and accessories: upon request Godpfx Aov Sy Sfef Ajbl Our service promise to you: - We are a certified master machine shop - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can completely or partially overhaul the selected machine - About the paint color of the selected machine You can decide freely. - If you wish, you can order additional accessories such as tools, etc. directly. - If you wish, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation.

Condition: used, Year of construction: 2004, operating hours: 20,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 500 mm, feed length X-axis: 600 mm, feed length Y-axis: 560 mm, feed length Z-axis: 500 mm, controller manufacturer: Siemens, spindle nose: DIN 40, number of slots in tool magazine: 180, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMC 60 H – 4-Axis Horizontal Machining Centre – 2004 Siemens CNC – 6 pallets – 180 tools – 20,000 hours A company in the aerospace sector is selling a DECKEL MAHO DMC 60 H 4-axis horizontal machining centre, year 2004, currently available for inspection under power and in production. Specifications: • CNC control: Siemens • Travels: X 600 / Y 560 / Z 500 mm • Tool magazine: 180 tools • Taper: DIN 40 • 6 pallets • Through-spindle coolant • Tool probe • Workpiece probe • Chip conveyor • Complete documentation • Low hours: only 20,000 hours • Visible under power and in production • Currently machining aerospace components • Test possible by appointment Gsdpfx Asy D A Rgef Aobl If you have any questions or need further information, please feel free to send us a message or call.

Condition: good (used), travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, In working condition Gbodpoylvc Dsfx Af Aol