Used Maurer Stage for sale (2,425)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 20250107, total length: 2,000 mm, total width: 1,900 mm, total height: 3,050 mm, overall weight: 1,000 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, heating capacity: 24 kW (32.63 HP), warranty duration: 12 months, maximum load weight: 700 kg, workpiece weight (max.): 700 kg, cage diameter: 1,390 mm, Single-stage cleaning machine Principle of operation, machine with lifting door The tank of the cleaning machine is manually filled with tap water (optionally via the AR-2 automatic refill valve) and heated via heating elements and thermostat settings. The time settings for the washing, draining (optionally drying and steam extraction) phases are set via the “PROCESS TIMER”. The parts are placed on the loading grid or loading trolley and pushed into the cleaning cabinet. Optionally, for heavy loads, a conveyor belt (MIU / AIU) can be installed to transport the parts into the cleaning booth. The lifting door is closed, the machine is started and the washing pump displaces the cleaning liquid onto the objects to be cleaned via the rotary spray systems. The rotation of the upper and lower spray pipe is activated by the reaction force of the reaction nozzle located at one of the ends of the spray pipe. The rotation speed can be adjusted with a screw in the reaction nozzle. Optionally, the rotation of the upper spray pipe can be motorized and the spray pipes can be equipped with nozzles. After the washing time has elapsed, there is a short dripping time in which the used cleaning liquid is returned to the washing tank via the filter baskets. Optionally, the liquid from the washing stage can be filtered using a filter unit (EFG-6 or PP197). Optionally, an additional stage, such as pre-washing or rinsing, is possible using the fixed spray pipes NS-2 / NS-TEMP. In this case, the parts are rinsed with fresh water (cold or heated) which flows into the drain via the drain valve. Codpfx Anevvuzcofogu Optionally, the parts can be dried after the cleaning process using a drying unit. After the cleaning process has been completed, the lifting door is left ajar for steam extraction. The steam from the cleaning booth is extracted using the steam extractor (DF-250S) or it can be condensed using the steam condenser (FX6002) and returned to the tank. Both accessories are optional and are not part of the standard equipment of the machine. After the steam extraction time has elapsed, the lifting door opens completely and the cleaning process is finished. Optionally, the lifting door can be equipped with a safety bar that automatically stops the door when it detects an object in the door opening. The cleaned components can be removed from the cleaning cabinet onto a loading platform or a loading trolley.

Condition: good (used), Year of construction: 2009, Section of Double-Stage Reverse Osmosis able to treat about 60 mc/g of product Cedpfotv Drlox Anfegu

Condition: used, 2 units single-stage screw clamping devices with exchangeable tension element thread inserts for M 85 and M100 Codpsthtnwefx Anfogu with hydraulic aggregat

Condition: excellent (used), functionality: fully functional, mileage: 1,34,600 km, power: 115 kW (156.36 HP), first registration: 03/2006, fuel type: diesel, axle configuration: 4x2, brakes: other, gearing type: mechanical, number of seats: 3, Equipment: ABS, air conditioning, airbag, differential lock, electric window regulation, truck registration, MOST PROMOSTAR.3 Promotion Mini Semi-Trailer Mercedes-Benz Sprinter 416 CDI with Semi-Trailer for Promotion/Event/Stage Use Fully wrapped in red / Original color: brilliant silver metallic 9744 MOST Special Vehicles MB 416cdi-P3 416 CDI 2,685 cm³ 160 HP (115 kW) 5-speed manual transmission Mini tractor unit 4x2 Differential lock ABS/ASR Air conditioning Rear view camera 3 seats Bunk/sleeping area 195/70 R15C tires Air brake system for trailer MOST Special Vehicles PROMOSTAR 3 Semi-Trailer/Trailer 2-axle Right side can be opened Event/stage with lighting, stairs, and railing Front area with separate door and access via extendable stairs Additional tent Air-braked Cgjdpfx Anex Tuiyefeu Stereo system/TV/HiFi 12V and 220V power supply 12V battery charger 2 axles with 195/50 R13C tires

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD700 can easily handle cleaning applications with high flow and pressure requirements. The pump is powered by a 6-cylinder Volvo diesel engine. There are two variants of the engine with an exhaust system according to EU Stage V / US EPA Tier 4 final or with an exhaust system according to EU Stage 2 / US EPA Tier 2. The Stage V solution is a pure SCR exhaust system. The frame is manufactured to be corrosion-resistant and is primed and painted for an attractive appearance. The frame is equipped with rubber mounts and forklift pockets. The machine can be supplied either as an open frame solution or as a fully built-in solution in a trailer or container. The CD700 can be equipped with a manual gearbox, which allows the pump to be operated in several flow ranges and even manual operation in the lowest gear is possible. Similar but no Falch, Hammelmann, Kamat, Uraca, Woma, etc. Available models: ----- Model Pressure Flow rate CD700-1000 1000 bar 261 Lpm General specifications: ----- Max. Pump speed: 522 rpm Drive engine: 6 cyl. Volvo Diesel EU Stage V or EU Stage II Power of the drive motor: 522 kW Cjdjhgblkepfx Anfsgu Drive engine speed: 1800 rpm Diesel tank: 800 L Max. Fuel consumption: 90 L/h Dimensions and weight on base frame: 3100mm x 1700mm x 2300 mm (5850 kg)

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, The CD200 series of our high-pressure machines covers pressures from 200 to 2,800 bar and flow rates from 23 to 300 l/min. The pump is powered by a water-cooled 4-cylinder AGCO Stage V diesel engine. The entire frame is constructed from hot-dip galvanized steel, ensuring long durability and corrosion resistance. For an attractive appearance, the frame is primed and then painted. The machine’s dimensions are 2,250 x 950 mm. The frame is equipped at all four corners with rubber feet, forklift pockets, and lifting eyes. The machine features a galvanized roof plate with a side bracket for protection and storage, for example for high-pressure hoses. Comparable but not the same as Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available SKID models: Model Pressure Flow rate CD200-200 200 bar 300 Lpm CD200-250 250 bar 250 Lpm CD200-1000 1000 bar 63 Lpm CD200-1380 1380 bar 42 Lpm CD200-2500 2500 bar 25 Lpm Cgsdpfshgbhnox Anfou CD200-2800 2800 bar 23 Lpm OPTIONAL: TRAILER VERSION CDT200 General specifications: ----- Max. pump speed: 560 rpm Drive engine: 4-cylinder AGCO Stage V diesel (optionally without AdBlue) Drive engine power: 149.1 kW Drive engine speed: 1,950 rpm Tank: 135 L for skid version, 200 L for trailer version Max. fuel consumption: 18-20 L/h Dimensions and unladen weight SKID: 2,170 mm x 1,350 mm x 1,810 mm (1,785 kg) Dimensions and unladen weight TRAILER: 3,800 mm x 1,900 mm x 2,000 mm (2,500 kg) Includes standard accessories.

Condition: as good as new (ex-display), Year of construction: 2025, High-pressure cleaning unit, high-pressure flushing device, high-pressure mounted washer on a hot-dip galvanized and painted high-quality steel frame with forklift slots, suitable for installation in commercial vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL, and 50/300XL—comparable but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo, etc. The following models are available: Moses 60/200 | 60 l/min at 200 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 75/150 | 75 l/min at 150 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses 30/300 | 30 l/min at 300 bar | Engine: Yanmar 3TNV88C 27.5 kW Stage V Moses XL 75/210 | 75 l/min at 210 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 84/190 | 80 l/min at 190 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 102/150 | 102 l/min at 150 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V Moses XL 50/300 | 50 l/min at 300 bar | Engine: Yanmar 4TNV88C 35.5 kW Stage V DIMENSIONS / WEIGHT: Dimensions for models with 27.5 kW without water tank (LxWxH): approx. 910 x 1,220 x 1,200 mm Dimensions for models with 35.5 kW without water tank (LxWxH): approx. 1,240 x 1,310 x 1,300 mm Unladen weight without water tank: approx. 550–700 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW for standard models and ELS for XL models - Flow rate: max. 102 l/min - Operating pressure: max. 300 bar ENGINE: - Manufacturer: Yanmar - Model: 3TNV88C and 4TNV88C - Fuel: Diesel - Cooling: Water-cooled - Cylinders: 3 and 4 - Max output: 37–48 HP (27.5–35.5 kW) - Max engine speed: 3,600 rpm TRANSMISSION: Pulley and belt drive CONTROL PANEL: - Start button - Hour meter - Electronic fuel gauge - LED indicator for oil temperature - LED indicator for low oil pressure - LED indicator for clogged air filter - LED indicator for RPM monitoring - LED indicator for generator - LED indicator for spark plugs - Emergency stop button ELECTRIC CONTROLS: - Hydraulic hose reel wind/unwind - Bypass on/off - Speed control +/- - Emergency stop button - Switch to radio remote control INSTALLED ALARM: - Water shortage safety device to protect the high-pressure pump from running dry with automatic shut-off function. SAFETY AND PRESSURE CONTROL VALVES: - The unit is equipped with a safety valve, pressure regulating valve, and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: 180° swiveling, hydraulic hose reel - Material: Stainless steel - Capacity: max. 100 m ½” - Hose: 80 m ½” high-pressure hose (included) - Hose guide: manual WATER SUPPLY HOSE REEL: - Type: manual - Material: Stainless steel - Capacity: max. 35 m ¾” low-pressure hose - Hose: 35 m ¾” low-pressure hose (included) FUEL / OIL TANK: - Fuel: approx. 13 l - Oil: approx. 13 l INCLUDED IN DELIVERY: - Multifunctional IMET radio remote control Codsf Ar Exjpfx Anfegu - Engine on/off - Bypass on/off - Speed control +/- - Hydraulic hose reel wind/unwind - Emergency stop button - Battery charger for radio remote control - 500, 800, or 1000 l water tank

Condition: used, functionality: unexamined, machine/vehicle number: G&L Series SSV, Used Goulds SSV Multi-stage Booster Water Pump Manufacturer: Goulds G&L Cgsdpfxox A Ax So Anfju Model: G&L Series SSV 3500 RPM 1.5 HP 360 PSI Max 230°F Max Complete with original manuals Sold per unit

Condition: like new (used), SUITABLE FOR ALL TYPES OF PRODUCTS: green peas, green beans, spinach, carrots, okra, beans, strawberries, artichokes, sweet corn, broccoli, cauliflower, mushrooms, etc. WATER CONSUMPTION: 1.5 L water per 1 KG of product. STEAM CONSUMPTION: 1.5 L steam per 4-7 KG of product. Cgsdpjx S H U Sofx Anfju The machine can operate in three modes: with water, with steam, or as a moisturizer (hydration). Hydration Blancher Version: In this configuration, the machine is suitable for completing the rapid rehydration process of cereals or legumes pre-started with the pre-heater. - Module 1 functions to treat the product with a water spray. - Modules 2, 4, and 6 work with steam. The temperature is controlled by a probe located in module 6, which regulates the modulating valve on the steam supply line to module 6, provided the pneumatic steam shut-off valve on module 2 is open. - Modules 3 and 5 use cold atomized water. - Module 7 is designed as a water-to-air cooler. - Module 8 works with water, and its temperature does not exceed 14ºC to lower the temperature of the product. Water Blancher Version: In this configuration, the machine operates in counter-current, meaning the product moves in the opposite direction to the cooling water flow. The first seven modules are equipped with trays with rotary water recovery filters, as well as associated level controls and water recirculation pumps. - Modules 1, 2, and 3 function as pre-blanchers for the product. - Modules 4 and 5 are specifically designed for blanching with hot water. Water is recirculated by pumps, and temperature is regulated in module 4. - Module 6 acts as the first cooling module and is fitted with a by-pass pump for recirculating warm water, which is redirected to the 2nd or 3rd module; supply to the 3rd module is regulated by a solenoid valve. - Module 7 cools the product using a water mist and removes humid air with a fan. - Finally, module 8 further cools the product by spraying water above and below the conveyor net, with all water collected in module 8’s recovery tank. Steam Blancher Version: In this variant, the machine can steam-blanch vegetables across eight modules: - Module 1 serves as a barrier to prevent steam loss. - Modules 2, 3, 4, 5, and 6 operate on steam. The temperature is maintained by a probe in module 6, controlling the modulating valve on the steam supply line, provided the pneumatic steam shut-off valves are open. - Module 7 is designed for WATER-AIR cooling. - Module 8 is water-cooled, with the temperature not exceeding 14ºC to rapidly reduce the product temperature.

Condition: like new (used), functionality: fully functional, The Manzini TE30 Single Turbo Passer is an industrial machine designed for processing fruits and vegetables, especially in the food industry. Its main function is the separation of pulp and seeds through a centrifugal refining system, enabling the production of purees, sauces, and concentrates with a homogeneous texture and free from impurities. Features: - Refining System: Utilizes a high-speed rotor that propels the product through interchangeable sieves, allowing the final texture to be adjusted according to specific requirements. - Versatility: Suitable for a wide variety of products, including tomatoes, stone fruits, berries, and other vegetables, adapting to various production processes. - Efficiency: Engineered for continuous operation, ensuring high output with minimal maintenance. Codpswxw A Tofx Anfsgu - Hygiene: Made entirely of stainless steel with an accessible design for easy cleaning and to meet food hygiene regulations. - Output may vary depending on the processed product.

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI Cedpfx Ansyug R Rjfsgu controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control Cgjdpfx Ajyug Hxenfeu enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, ATLAS COPCO XAHS447 STAGE3 portable compressor with aftercooler, fully serviced Technical data: Capacity: 26.6 m³/min; Working pressure: 12 bar; Year of manufacture: 2015 Engine: CAT C9.3 ACERT 242 kW Operating hours: 0 The compressor is fully operational, ready for work, comes with warranty Net price: PLN 187,000 Csdpfey Ic Rnjx Anfjgu Gross price: PLN 230,010 Machine imported in excellent condition Below are video links.

Condition: new, Year of construction: 2026, machine/vehicle number: QEP-M029, fuel type: diesel, motor manufacturer: Perkins 404J-22G, General information Field of application: Construction Weights Empty weight: 1.430 kg Functional Generator capacity: 22 kVA Dimensions of cargo space: 220 x 120 x 184 cm Other information Fuel consumption: 5.2 Liter/Hour at 75% Load Generator: Mecc Alte ECP28-L/4 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 500 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel Cjdpoynfp Esfx Anfegu - Steel canopy - Tank

Condition: new, Year of construction: 2024, machine/vehicle number: JME02824, fuel type: diesel, motor manufacturer: Caterpillar C7.1, General information Field of application: Construction Weights Empty weight: 1.522 kg Functional Generator capacity: 148 kVA Dimensions of cargo space: 194 x 126 x 97 cm CE mark: yes Other information Fuel consumption: 32 Liter/hour at 100% load Generator: CAT LSA 44.2 Frequency: 50 Voltage: 400 Cgjdpfxjxw Ncte Anfeu Drill equipment: Control Panel Emission level: Stage V / Tier IV final Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel

Condition: new, Completely NEW Csdpfxjy Rm Tls Anfogu

Condition: new, Sheet Rack new Significantly less space required compared to stack storage Clear sorting of all sheets – no searching, no restacking Expandable with additional bays – grows with your business Clean, organized working environment – professional impression Csdpfx Anexllvxjfsgu Easy handling thanks to castor at the rack entry Supplied as a kit – low shipping costs Robust steel construction – durable and load-bearing Technical data: Length 2500 mm Width 870 mm + 410 mm per additional bay Height 2390 mm Bay width 370 mm Images: show examples with and without extension bay Can be expanded with extension bays as needed: Price per bay €1080 + VAT Availability: Short-term from stock Location: Flörsheim

Condition: excellent (used), We have several adjustment sets, all fully functional. Cgodpsyrd S Tefx Anfeu

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 1729, functionality: fully functional, empty load weight: 10,000 kg, workpiece width (max.): 5,500 mm, workpiece height (max.): 980 mm, Equipment: CE marking, Submitting a bid obligates you to collect the item on time, no later than June 22, 2026! TECHNICAL DETAILS Workpiece width max.: 5,500 mm Workpiece height max.: 980 mm Number of working stations: 8 Number of cylinders per press level: 10 Number of clamping devices per press level: 10 MACHINE DETAILS Power of main motor: 1.5 kW Press drive: Hydraulic Dimensions & Weight Dimensions (L x W x H): 8,000 x 2,200 x 2,450 mm Unladen weight: 10,000 kg Csdpfx Aney Tviuefsgu Transport packages: 1 EQUIPMENT CE marking Separate press stages Motorized rotation 2 working stations per side

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12952*19912, Year of construction: 2020, This forklift is a returned leasing vehicle. The technical data correspond to the information listed on the original invoice. The seller assumes no liability for this information. TECHNICAL DETAILS Lifting height: 19,065 mm Overall height: 10,490–19,710 mm Side shift: ±600 mm Tilt compensation: ±6° Mechanical height compensation: 200 mm Load center: 1,220 mm Turning radius: 6,000 mm MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Drive system Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW Torque: 1,175 Nm Engine speed: 1,600 rpm Displacement: 7.7 l Cylinders: 6 Emission standard: EU Stage 5 Transmission: ZF Automatic 4WG-191-B Codoy T Ed Ijpfx Anfegu Drive axle: Kessler D91 Track width: 4,600 mm Hydraulic system Filtration: 10 µm Accumulator pressure: 60 bar Accumulator volume: 2 l Electrical system System voltage: 24 V Cabin Cabin length: 1,605 mm Cabin width: 1,480 mm Cabin height: 1,620 mm Connection: 24 V / 10 A Tyres Tyre type: 14.00 x 24" PR: 24 EQUIPMENT Box-frame chassis Bolted tanks Mudguards Crane lifting eyes Turbo-II air filter Wheel nut protection HLL filter Oil tank preheating LED lighting Reversing alarm Beacon light MD4 touch display Drive login system Cab ventilation Interior rearview mirror Clothes hook Side mirrors Air horn USB port Central lubrication system Reversing camera Fire extinguisher Anti-slip strips Cabin protection frame

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M12902*19846, Year of construction: 2020, The forklift is a returned lease vehicle. The original purchase price was €313,926.00. The technical data corresponds to the original invoice. The seller does not accept liability for this information. The operating hours are based on the status as of April 2025; additional hours have accrued since then. TECHNICAL DETAILS Lifting height: 19,065 mm Load center: 1,220 mm External turning radius: 6,000 mm Overall height: 10,490–19,710 mm Side clamps Sideshift: ±600 mm Tilt compensation: ±6° hydraulic, mechanical height compensation 200 mm Cgsdpfx Anjy T Eb Tjfou MACHINE DETAILS Dimensions & Weight Dimensions (W x H): 6,660 x 10,490 mm Total weight: 44,900 kg Engine Engine: Volvo TAD-881-VE Fuel type: Diesel Output: 185 kW / 1,175 Nm at 1,600 rpm Displacement: 7.7 liters / 6 cylinders / EU Stage 5 Transmission: ZF Automatic 4WG-191-B Drive axle: Kessler D91 (track width: 4,600 mm) Electrical system: 24 V CAN bus system with 7" color display EQUIPMENT Box frame, bolted tanks, mudguards Operator protection roof (steel construction) External rear-view mirrors (high mounted) Variable piston pumps with return flow filter (10 µm) Joystick control with power steering Pressure accumulator for lift mast (60 bar / 2 liters) LED lighting (position, indicator, work, and rear lights) Cab (OPTIMA): L x W x H = 1,605 x 1,480 x 1,620 mm 3 wipers, ventilation, opening side windows Electric 24V socket (10A), internal rear-view mirror, coat hook Duplex mast 6/7: lifting height 2,310–19,070 mm, overall height 10,490–19,710 mm Spreader: ELME 584LD, side twin-spreader 20–40", with hooks and side clamps Central lubrication system 'Lincoln' Reversing camera (MOTEC, 6.7" color display, heated lens) Fire extinguisher (6 kg, mounted externally on the left) Tyres: Size: 14.00 x 24" / PR24, Manufacturer: Michelin XZM Operating manual, driver’s handbook, spare parts catalogue

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M11360*17766, Year of construction: 2018, load capacity: 12,000 kg, lifting height: 6,500 mm, The technical data are taken from the original order confirmation. The seller cannot guarantee that these correspond to the current condition. TECHNICAL DETAILS Lifting capacity: 12,000 kg at a load center of 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Collapsed height: 4,895 mm Extended height: 8,100 mm Tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Cgjdpoy T Edhjfx Anfju Wheelbase: 3,500 mm Engine: Volvo TAD-871-VE / 6-cylinder / eco-friendly engine with CAN bus (EU Stage IV), 185 kW at 2,200 rpm, 1,160 Nm, displacement 7.7 L STEINWEG Stone Stack Grab Type HG1T-6000S TECHNICAL DETAILS Clamping range: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Clamping height: 1.3 m Lifting capacity: 6,000 kg Double clamp bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum suspension EQUIPMENT Manufactured in a robust and clean welded construction Splayed clamp arms mounted rotatably With hydraulic cylinders, required valves, pipes, and fittings Including oil pressure manometer and connection hoses to the rotator Additionally: one pressure gauge mounted 180° opposed to the standard manometer LIFTING ARM & EXTENSION TECHNICAL DETAILS Extension: 1.6–2.1 m Lifting capacity: 8,000 kg at an outreach of 1.6–2.1 m EQUIPMENT 1 piece forklift lifting arm, twin beam, with endless rotator and pendulum suspension Including connection hoses to forklift 1 piece hydraulic extension with telescopic cylinder 1 stabilizer (2 pcs) for pendulum motion compensation Integrated side shifter in slide guides, travel: 250 mm RADIO PRESSURE MONITORING (Clamping Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30°C to +85°C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second intervals EMC System / Cabin & Operation EMC system: Electronic control with 7" touch screen Driver's seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable to the side ADDITIONAL EQUIPMENT Front mud flaps Rear mud flaps Exterior mirrors on fender (high) Turbo II heavy-duty air filter Additional hydraulic functions Quick couplings on the fork carriage Accumulator/vibration damper 60 bar / 2 L in the lifting function Hydraulic oil tank pre-heating Additional LED headlights, 2 × on the mast Reversing alarm LED beacon Electrical cables over the mast Power connection 400 V, 3-phase Blue Spot front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with RPM increase EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper ACC air conditioning SMV universal mounting rail Movable A4 writing pad LED reading lamp Diesel parking heater + engine water heater Sun visor (roof/front) Panorama rearview mirror Preparation for attachments from other manufacturers Central lubrication base, 14 points

Condition: new, Year of construction: 2025, load capacity: 3,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, power: 44 kW (59.82 HP), motor manufacturer: Toyota, gearing type: other, fork length: 1,070 mm, color: orange, Country of origin: Japan Displacement: 2,486cc Dimension: 2,930 x 1,240 x 2,170 (without the mast extension) Gearbox type: Power Shift Lights - Front Combination Lights & Rear Combination Lights Mirror - Rear View Mirror (Right & Left Sides) Height of Overhead Guard Yellow strobe light Led rear combination lights Headlights with front combination lights Seat belt Back up buzzer Rear pillar assit grip Rear view mirror right & left sides Radiator screen 2170 mm Led rear working light (selective lightning condition) Csdpsy Tykijfx Anfogu System of active stability (SAS) Cycloen air cleaner (dual elements) Pre-cleaner Anti-restart ignition key switch Floor mat Tool standard set Spark guard net Operator Presence Sensing System (OPS) Neutral Safety Switch Rated Capacity: 3000 kg - MODEL - 62-8FD30 Load Centre: 500 mm Fuel Type: Diesel Steering: Power Steering Free Lift : 135/135MM - (Wo/ W- Load Backrest) Mast Type: 2 Stage Mast Mast Lowered Height: 2615mm Mast Extended Height: 4740 / 5220 mm - (WO/W Load Backrest) Carriage Type: Side Shift Carriage Fork Length: 1070 mm Tyres: Solid Levers: 4 Brake Type: Hydraulic Brake = More information = Number of cylinders: 4 Engine capacity: 2.486 cc Engine type: Toyota IDZ II Fuel tank: 60 litres Lowered mast height: 2615

Condition: new, Year of construction: 2026, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 940 mm, fuel type: diesel, mast type: triplex, power: 44 kW (59.82 HP), motor manufacturer: Toyota, fork length: 1,220 mm, total height: 2,090 mm, total length: 2,420 mm, total width: 1,160 mm, color: red, Country of origin: Japan Displacement: 2,486cc Dimension: 2,420 x 1,155 x 2,085 Brakes: Hydraulic Gearbox type: Power Shift Lights - Front Combination Lights & Rear Combination Lights Mirror - Rear View Mirror (Right & Left Sides) Height of Overhead Guard - 2110 mm Yellow strobe light Led rear combination lights Headlights with front combination lights Seat belt Back up buzzer Rear pillar assit grip Rear view mirror right & left sides Radiator screen Led rear working light (selective lightning condition) Cgsdpfx Aney Tyi Sofsu System of active stability (SAS) Cycloen air cleaner (dual elements) Pre-cleaner Anti-restart ignition key switch Floor mat Tool standard set Spark guard net Operator Presence Sensing System (OPS) Neutral Safety Switch Rated Capacity: 2500 kg - MODEL - 62-8FD25 Load Centre: 500 mm Steering: Power Steering Free Lift : 935MM - (with Load Backrest) Mast Type: Wide Visible Mast 3 stage full free lift - (FSV Type) Mast Lowered Height: 2145mm Mast Extended Height: 5910 mm - (with Load Backrest) Carriage Type: Side Shift Carriage Fork Length: 1220 mm Tyres: Solid Levers: 3 Brake Type: Hydraulic Brake = More information = Number of cylinders: 4 Engine capacity: 2.486 cc Engine type: Toyota IDZ II Fuel tank: 60 litres Tyre size on axle 1: Pneumatic Solid Tyre size on axle 2: Pneumatic Solid Tyre size on axle rear: Pneumatic Solid

Condition: new, power: 309 kW (420.12 HP), fuel type: diesel, tire size: 385/65 R22.5 + 315/80 R22.5 (twins at rear), axle configuration: 8x4, fuel: diesel, fuel tank capacity: 300 l, color: white, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2024, Equipment: air conditioning, = Additional options and accessories = - Spare wheel - Sun visor = Remarks = Cjdpjy Tyixjfx Anfegu Cabin type: AD Country of origin: Italy Gcw: 104 Tons Brakes: Drum Brakes with ABS and EBL Steering: LH Drive Construction: Chassis wheelbase: 1900 mm Air Suspended Driver Seat (adjustable) and Standard Passenger Seat (adjustable) Type: HD9 84.42 Cab Type: AD Rear Axle Rate: 5009 Chassis Length: 6850 mm Shipping Dimension: 9175 x 2550 x 3450 mm Manual Gearbox ZF 16 forward and 2 reverse gears Rear Overhang: 1200 mm Rear Differential Lock: Available Reinforced Air Filter double stage with air intake on the cab roof Heated Fuel Filter Standard Parabolic Suspensions (Leaf-Spring type) with stabilizer bar on the 1st axle Standard Batteries Qty2 (180Ah each) with manual cut-off Standard Alternator 90Ah x 28V (2520 W) Electric Doors' Windows with tinted glass Standard Manual Rear View Mirrors CE compliant Radio pre-arrangement Front Lights protection grids Front Manouvering Hook (at center of front bumper) Standard Tool Kit and Hydraulic Jack Reverse Gear Buzzer Anti-Roll Bar On 2Nd Rear Axle Anti-Roll Bar On 3Rd Rear Axle Reinforced Rear Suspensions Auxiliary Air Intakes On Left Side Close To Batteries Provision For PTO Control Reinforced Front Parabolic Suspension 9 Tons Fuel Pre-Filter Front Mirror English Plate Standard Front Hood (Same Color Of Cab With Logo In Black) Rear Lights Protection Grids Inflation Kit For Tyres: Hose + Air Gun + Manomenter Wheel Chocks (Qty 2) = More information = Tyre size: 385/65 R22.5 + 315/80 R22.5 (twins at rear) Suspension: leaf suspension GVW: 50.000 kg Engine type: Cursor 13 , Ecosplit