Used Mazak Fjv 20 for sale (295)

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 12.000 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK Bdsdpfxjzqt Umj Airsi If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing Bodpsyvvlusfx Airjdi - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: used, Year of construction: 2003, x-travel 1660 mm y-travel 510 mm z-travel 510 mm control Mazatrol 640M Bdjdpfx Ajztfuwjiroi

Condition: used, Year of construction: 1997, x-travel 1660 mm y-travel 510 mm z-travel 510 mm Control M+ Mazatrol Table dimensions 2000x510 mm table load max. 1.000 kg number of spindle speeds 7.000 UpM Bdjdpfx Aiszwqcnoroi tool taper SK 40 tool piece magazine with 48 Stück weight of the machine ca. 7.500 kg

Condition: excellent (used), Year of construction: 2016, operating hours: 25,187 h, functionality: fully functional, The Mazak 3D Fabri Gear 400 II is a 6-axis 3D laser cutting machine designed for cutting tubes and profiles, specifically engineered for processing large-diameter materials and structural shapes. The 2016 model is typically equipped with a 4.0 kW Panasonic CO2 laser resonator and specialized 3D heads for complex cross-sections. Key technical parameters (2016 model): Laser type: 4.0 kW (4000 W) CO2 resonator Maximum material length: 12,000 mm (12 m) Maximum tube diameter: approx. 406 mm (16") Maximum square profile: 254 mm x 254 mm (10" x 10") Axes and movement: 6-axis control (X, Y, Z, A, B, C) Bdedpfx Aozg U Tpjiroi Control unit: Mazak FX Maximum workpiece weight: approx. 480 kg Functions and capabilities: Material types: Carbon steel, stainless steel, and structural profiles (I-beams, channels, angles). 3D head: Rotatable 3D laser head with a touch sensor (probe) and an auto-focus system. Automation: Weld seam detection and automatic material measurement. Optional equipment: Threading unit (enables cutting and threading in a single cycle) V-TYPE FEEDER Machine operating hours: 25,187 hours. Link to machine video:

Condition: used, Year of construction: 2000, x-travel 1120 mm Bdsdpfeztfu Djx Airei y-travel 510 mm z-travel 510 mm control Mazatrol 640 M

Condition: good (used), Year of construction: 2006, operating hours: 1,716 h, functionality: fully functional, turning length: 1,500 mm, turning diameter: 420 mm, Equipment: documentation/manual, Used Mazak Quick Turn Nexus 350 M machine, standard configuration with a 15" Kitagawa three-jaw chuck and a center distance of 1500 mm, maximum turning diameter of 420 mm. Bdodo Ahgkpopfx Airei Power on: 4936 hours, operating hours: 1736 hours. No unusual noises detected. Maintained and serviced by Mazak in February 2026. The machine is in excellent condition and comes with a large number of tools.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 64,403 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 575 mm, spindle motor power: 22,000 W, total height: 1,840 mm, total width: 1,780 mm, overall weight: 5,000 kg, controller manufacturer: MAZATROL, controller model: 640T Nexus, product length (max.): 2,353 mm, number of axes: 4, This 4-axis Mazak QTN-200M was manufactured in 2004. It features a maximum turning diameter of 380 mm and a maximum swing diameter of 675 mm. The machine is equipped with a powerful main spindle that reaches speeds of up to 5,000 rpm and a robust tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the Mazak QTN-200M machine we have for sale. Contact us for further details. - Work Area:- Max. Swing Diameter: 675 mm- Max. Swing Diameter over Cross Slide: 276 mm- Max. Turning Diameter: 380 mm- Max. Bar Work Capacity: 65 mm- Main Spindle:- Main Drive Power (30 min rating / 100% continuous): 26 kW / 22 kW (Integrated Spindle Motor)- Max. Torque: 350 Nm- Spindle Nose: A2-6"- Spindle Bore: 76 mm- Chuck Diameter: 210 mm- Second Spindle (Sub-spindle):- Drive Power (30 min rating / 100% continuous): 10 kW / 7.5 kW- Max. Torque: 75 Nm- Speed Range: 35 - 6,000 rpm- Indexing: 0.001°- Chuck Diameter: 169 mm- Tool Turret:- Tool Positions: 12- Tool Mounting Type: VDI-like- Turning Tool Shank Height: 25x25x150 mm- U-Drill Diameter: 20 mm- Boring Bar Shank Diameter: 40 mm- Indexing Time: Approx. 0.2 s (1 step)- Driven Tools (Live Tooling):- Drive Power (10 min rating): 5.5 kW- Speed Range: 25 - 4,500 rpm- Max. Torque: 35 Nm- Travel Ranges & Speeds:- X-Axis Travel: 230 mm- Z-Axis Travel: 575 mm- Rapid Traverse Rate X-Axis: 30 m/min- Rapid Traverse Rate Z-Axis: 33 m/min- Tool Setting / Monitoring:- Automatic Tool Breakage Recognition- Automatic Tool Wear Compensation Adjustment Range: 9,999 mm- Tool Presetter: Tool Eye- Coolant & Pneumatics:- Coolant Tank Capacity: 160 l- Pneumatic Pressure: 5 bar, 100 l/min- Machine Dimensions & Weight:- Connected Load: 46.2 kVA- Operating Voltage: 400 V / 50 Hz- Required Floor Space: 1.740 x 1.780 mm (Base layout space)- Transport Dimensions (QTN 200 M - U 500): 2,353 mm (L) x 1,780 mm (B) x 1,840 mm (H)- Machine Weight: Approx. 4,900 kg - 5,100 kgincluded: LNS QUICK LOAD SERVO 3 (2004)- Type: Automatic Short Bar Loader- Bar Diameter Range: 6 mm to 120 mm- Bar Length Range: 100 mm to 1600 mm Technical Specification Bdsdpfxezqz D Nj Airsi Counter Spindle Yes Driven Tools Yes

Condition: good (used), Year of construction: 2002, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 1,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 30, Equipment: chip conveyor, Used Mazak machining center, type VTC-200C, year 2002, in like-new condition, 10,000 RPM with spindle cooling. X = 1660 Y = 510 Z = 510 1,000 kg capacity on the table Includes several high-quality vices. Weight: 9,100 kg BT 40 Includes a few tool holders. Bdedpfszhv Uwex Airji Capacity for 30 tools in the magazine. The machine must be picked up ex works no later than Monday of week 37.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 14,597 h, travel distance X-axis: 195 mm, travel distance Z-axis: 560 mm, controller manufacturer: MAZATROL, controller model: Smart, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2012. This Mazak Quick Turn Smart 200 features a 12-position turret and is equipped with a Hainbuch chuck, enhancing its versatility. It has a bar capacity of 65 mm, making it suitable for various turning applications. If you are looking to get high-quality turning capabilities, consider the Mazak Quick Turn Smart 200 machine we have for sale. Contact us for further details. Bdodpfx Aiezhbqksrei • Supply Voltage: 3 Phase, 400 V, 50 Hz • Control Circuit Voltage: AC100 V / DC24 V • Main Breaker Interrupting Capacity: 20 kA • Supply Voltage (Ue): 400 V, 3~ • Rated Current (Ie): 3.5 A • Frequency: 50 Hz • Weight Barfeeder: 500 kg • Breaking Capacity (Icn): 5 kA • Control: Mazatrol Smart • Turret: 12-Position • Bar Capacity: 65 mm • Hainbuch Chuck (Standard Chuck Also Included) • Optional, not included: IEMCA KID 80 Bar Feeder (2012) Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 2023, For Sale: Mazak OPTIPLEX 4020 FIBER III Fiber Laser Cutting Machine Offered for sale is a Mazak OPTIPLEX 4020 FIBER III, manufactured in 2023 and built by the renowned Japanese machine tool manufacturer Yamazaki Mazak Corporation. This modern fiber laser cutting system combines high productivity, precision, and reliability, making it suitable for a wide range of sheet metal processing applications. Technical Data - Manufacturer: Yamazaki Mazak Corporation - Model: OPTIPLEX 4020 FIBER III - Machine Type: Fiber Laser Cutting Machine - Year: 2023 - Machine Weight: Approx. 5,300 kg - Origin: Japan Bsdpfx Asz Ia Ulsirodi - Cutting hours : 2592h - Operating hours : 5110h Technical Specifications - Working Area: 4,000 x 2,000 mm - Laser Technology: Fiber Laser - CNC Control: Mazatrol Preview G / Smart Factory compatible - Automatic Focus Cutting Head - High-Speed Linear Drives - Intelligent Nozzle Change System - Automatic Cutting Condition Optimization - Energy-Efficient Fiber Laser Source - Advanced Collision Protection - Integrated Process Monitoring Availability: Immediately Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! * Manufacturer: Yamazaki Mazak Corporation * Model: OPTIPLEX 4020 FIBER III * Machine Type: Fiber Laser Cutting Machine * Year: 2023 * Machine Weight: Approx. 5,300 kg * Working Area: 4,000 x 2,000 mm * Laser Technology: Fiber Laser AVAILABILITY: IMMEDIATELY * Cutting hours: 2592h

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, Equipment: documentation/manual, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Bjdpfozv Sfbjx Airedi Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: good (used), Year of construction: 1998, Vertical Machining Center Mazak VTC-20C The machine is in fully operational condition and has undergone comprehensive service maintenance. You are welcome to inspect it. In 2025, the spindle of the MAZAK VTC-20C was overhauled. Please find some key details from the technical specification below. If you require any additional information, please do not hesitate to ask. Specification | Value ---|--- X-axis travel | 1,660 mm Y-axis travel | 510 mm Z-axis travel | 510 mm Distance from table surface to spindle nose | 180–690 mm Distance from column front to spindle centerline | 550 mm Working table area | 2,000 × 510 mm Maximum table load (uniform load) | 1,000 kg Spindle speed | 40–7,000 rpm Spindle motor power – 10 min rating | 11 kW Spindle motor power – 30 min rating | 7.5 kW Spindle motor power – continuous | 5.5 kW Spindle taper | 7/24 taper No. 40 X-axis rapid traverse | 24,000 mm/min Y-axis rapid traverse | 24,000 mm/min Z-axis rapid traverse | 20,000 mm/min X-axis cutting feed rate | 1–5,000 mm/min Y-axis cutting feed rate | 1–5,000 mm/min Z-axis cutting feed rate | 1–5,000 mm/min Tool magazine capacity | 24 tools Tool selection system | Tool holder No. fixed-address system (automatic short-cut system) Bedpfx Ajvurd Eeiredi Tool shank | NT-40 Pull stud bolt | Yamazaki-made ANSI type Maximum permissible tool diameter | Ø80 mm Maximum tool diameter with adjacent pocket empty | Ø110 mm Maximum permissible tool length | 350 mm (from gauge line) Maximum permissible tool weight | 8 kg (including tool shank and pull stud bolt) Maximum total tool weight in magazine | 96 kg (average 4 kg × 24 tools) Machine weight | 7,215 kg Machine height from floor | 2,701 mm Required floor area | 4,000 × 2,990 mm

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Bdodpfxsznmbuj Airoi

Condition: ready for operation (used), Year of construction: 2005, Make: YAMAZAKI MAZAK U.K. LTD Type of machine: VTC-200C Year of manufacture: 2005 Control system: Mazatrol 640 M Bdodpfjzru Rfsx Airsi Machine's weight: 8.260 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Speed range: 12.000 U/min Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze

Condition: ready for operation (used), Year of construction: 2005, A CNC vertical moving-column machining center Mazak in need of repair is available. Travel X/Y/Z: 1120mm/510mm/510mm, table dimensions X/Y: 1460mm/510mm, max. table load: 800kg, spindle speed: 12000rpm, tool holder: SK40, tool stations: 30, rapid traverse: 36m/min. Machine dimensions X/Y/Z: approx. 3300mm/2900mm/2800mm, weight: approx. 7500kg, control: Mazatrol 640 M. The spindle does not always decelerate properly. Documentation available. An on-site inspection is possible. Bjdpfjzf Nccex Airodi

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 187859, turning diameter: 380 mm, spindle speed (max.): 5,000 rpm, rotational speed (max.): 4,500 rpm, bar passage: 65 mm, overall weight: 4,900 kg, Mazak QTN-200MS CNC turning and milling center, manufactured in 2006 with subspindle and driven tools Main spindle with Kitagawa chuck and Hainbuch collet chuck, 35-5000 rpm. Subspindle with Kitagawa chuck, 35-6000 rpm. All 19 tool holders, including 5 driven tools Jaws, collet chucks, wrenches and accessories shown in the photo are included. 12-position turret Parts catcher, chip conveyor >>Bar feeder FMB SL80 V (year 2020) >>Conveyor belt The machine has been very well maintained. Hydraulic oil, lubricants, and operating fluids have been recently changed. The machine can be inspected while in operation. Model: QTN-200MS Serial number: 187859 Weight: 4900 kg Weight: 10780 lbs Bodpey Tb D Djfx Airedi Year of manufacture: 2006 If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2001, Parts shown by hand not come. Bdsdpfoz Ny Dkjx Airoi

Condition: used, Year of construction: 1984, x-travel 1000 mm y-travel 508 mm z-travel 460 mm size of pallet 1240 x 550 mm numbers of pallets 2 workpiece weight 800 kg spindle taper ISO 40 Bedpfxetqqk Is Airodi spindle motor 5,5 kW turning speed range 28 - 4000 U/min no. of tools in magazin 30 control MAZATROL M 1 weight of the machine ca. 5,6 t dimensions of the machine ca. 4,50 x 3,00 x 2,65 m acc.: chip conveyor

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 6,700 kg, MAZAK FJV-250 CNC Vertical Machining Center For sale is a robust and powerful Mazak FJV-250 with a double-column/gantry design. Technical specifications: Manufacturer: MAZAK Model: FJV-250 Year of manufacture: 2001 Control: Mazatrol PC Fusion 640 M Travel ranges: X-axis: 1,020 mm Y-axis: 510 mm Bedpfoz Ihxljx Airjdi Z-axis: 460 mm Table size: approx. 1,200 × 550 mm Max. spindle speed: 12,000 rpm Tool holder: SK40 / ISO40 3-axis CNC machining center The FJV-250 is designed for precise and demanding milling operations thanks to its stable double-column construction. The generous work area allows for the machining of larger and heavier workpieces. The Mazatrol PC Fusion 640 M control system enables both comfortable Mazatrol dialog programming and the processing of CNC programs. The machine can be inspected and demonstrated under power by arrangement. Location: 78120 Furtwangen, Germany Subject to prior sale and errors in the technical specifications.

Condition: used, Year of construction: 2020, turning diameter 380 mm turning length 511 mm control Mazatrol SmoothG turning diameter over slide 276 mm max. swing diameter over bed 675 mm Standard machining diameter 276 mm bar material dia. 65 mm x-axis 234 mm rapid traverse X-axis 30 m/min z-axis 625 mm rapid traverse Z-axis 33 m/min Bedpfx Aotugggeirodi turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 26 KW 22 KW Max. Torque 465 Nm turning speeds 6000 U/min Main drive power 11 KW Max. Torque 90 Nm Milling spindle speeds ( driven tools) 35-6000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20x2,5 Switching time one turret station ca. 0,20 sec coolant tank 180 l connected load 46,2 kW weight of the machine ca. 5,9 t dimensions of the machine ca. 2,7 x 1,9 x 1,9 m incl. the following accessories: - Signal light (3-colour LED), rectangular - High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min, pressure (at pump) 5 bar. - Additional coolant nozzle main spindle - Preparation for oil mist extraction electrical/mechanical flange 98mm - Preparation for bar feed - Robot interface (Advance/Profibus) - Chip conveyor with low ejection height - Overload monitoring system - Drilling cycle with torque-dependent chip breaking - Preliminary use of a hollow clamping cylinder on counter spindle - Hollow clamping device incl. draw tube + cylinder - Clamping chuck Hainbuch Spanntop Nova Axfix mini size 52 - Chuck Hainbuch Spanntop Nova Axfix special mini size 52 - 2 x collets - Changing device for collet chuck STANDARD ACCESSORIES Automatic on/off and warm-up function Air blowing device on the chuck on the counter spindle Use of linear systems with guide carriage USB connection (1 connection) Set of manuals in electronic form on CD C-axis main spindle Input accuracy 0.0001° Spindle positioning counter spindle without C-axis Input accuracy 0.001° Tool turret with 12 stations VDI, Operator door with locking switch Double foot switch for both main and counter spindle Hydraulic pressure interlock Fully enclosed work area Work area lighting Safety precautions in accordance with global standards High-performance coolant system (520W) Flow rate max. 11.5 l/min. Complete coolant system Automatic opening/closing of the chuck jaws Automatic tool eye Absolute positioning system Preparation for chip conveyor (lateral) Synchronisation of main and counter spindle Synchronised tapping with milling spindle Relocation Detector Mazatrol SmoothG control 19" LCD colour screen (touch screen) User macro (600 variables) EIA/ISO input function Optional stop (optional stop) Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN SD memory card I/F - Second-hand machine without warranty - All dimensions, weights and performance specifications are non-binding

Condition: ready for operation (used), Year of construction: 2004, Make: YAMAZAKI MAZAK U.K. LTD Type of machine: VTC-200C Year of manufacture: 2005 Control system: Mazatrol 640 M Machine's weight: 8.260 kg Tool holder: SK 40 x-travel: 1.660 mm y-travel: 510 mm z-travel: 510 mm Bjdpfx Ajxk U R Noirjdi Speed range: 12.000 U/min Table dimensions: 2.000 × 510 mm Number of tools in the magazine: 24 Plätze

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 966 h, MAZAK OPTIPLEX NEXUS 3015 FIBER - 4 kW CNC Fiber Laser Cutting Machine Price: EUR 190,000 net Condition: Used – VERY LOW OPERATING HOURS Resonator: IPG YLS-4000 U VERY LOW WORKING HOURS The machine has exceptionally low operating hours. The IPG resonator and critical components are in near-factory condition: - Practically full remaining lifespan of the IPG resonator (rated for up to 100,000 h) - Minimal wear on the optical system, Multi-Control Torch 2.1 head, and linear guideways - Cutting quality and precision comparable to a new machine - Operating hours confirmed by CNC readout – documentation available upon request or during inspection TECHNICAL SPECIFICATIONS Model: Optiplex Nexus 3015 Fiber Laser Type: Ytterbium fiber laser Resonator: IPG YLS-4000 U Laser Power: 4.0 kW Max. Sheet Size: 1,525 x 3,050 mm Max. Pallet Load: 930 kg Travel (X/Y/Z): 3,100 / 1,580 / 150 mm Rapid Traverse (X/Y): 60 m/min (85 m/min combined) Drive X1/X2/Y: Rack & pinion, direct-drive Drive Z: Servo, ball screw Accuracy X/Y: ±0.05 mm / 500 mm Repeatability: ±0.03 mm Head: Multi-Control Torch 2.1, F125-F200 mm Assist Gases: O2, air, third gas; 0.02–2.5 MPa CNC: Mazatrol Preview G, 19" touchscreen Pallet Changer: Automated, 2-pallet Weight: Approx. 12,850 kg Power: 380–480 V, max. 18 kW CUTTING CAPACITY (4 kW) Bsdpsy Dgxuefx Airsdi Mild steel O2: 20 mm Mild steel N2: 4 mm Stainless steel N2: 15 mm Aluminum N2: 15 mm Copper O2: 8 mm Brass N2: 8 mm INTELLIGENT FUNCTIONS (INCLUDED) Automatic nozzle changer (8 nozzles), auto focus positioning, focus detection, auto profiler calibration, auto nozzle cleaning, beam diameter control, pierce/plasma/burn detection, fine power ramping, flash cut. SCOPE OF DELIVERY (INCLUDED IN PRICE) Cast-iron frame (foundation-free installation), Mazatrol Preview G CNC 19", Multi-Control Torch 2.1 head with 8-position nozzle changer, OPTIPOD module, automatic 2-pallet changer, chiller with 6 m hoses, cutting nozzles 1.2/2.0/3.0 mm plus 5 adapters, laser edge detection, numerical gas pressure control, multi-tap transformer, slatted table (100 mm spacing), tools, documentation (PL/EN). OPTIONAL EQUIPMENT – NOT INCLUDED The laser system can be purchased separately for EUR 190,000. Options below are available at additional cost. OPTION A – PRESSURE-BOOSTING UNIT – EUR 15,000 net Allows cutting with compressed atmospheric air instead of expensive nitrogen, greatly reducing operating costs. Components: 1. Compressor SK 25 / max. 15 bar / SK.2-13318 2. Condensate Drain Ultramat UFM-D03 3. Economizer Ultra-Filter DF 0035 - DF 1100 4. Ultra-Filter DF 0035 - DF 1100 5. Pressure vessel, 500 l Air cutting capacity: mild steel up to 6 mm, stainless up to 4 mm. OPTION B – SHEET LOADING CRANE – EUR 5,500 net Sheet loading crane, lifting capacity up to 700 kg. Enables safe and quick loading of sheets onto the laser pallet. PRICE SUMMARY (NET, EUR) Machine only: EUR 190,000 Option A (pressure unit): EUR 15,000 Option B (loading crane): EUR 5,500 Total with both options: EUR 210,500 COMMERCIAL TERMS - All prices are net, in EUR (VAT not included) - Offer valid for 30 days - Payment and delivery terms to be agreed - Inspection and test cutting available by appointment

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 138616, turning length: 1,000 mm, turning diameter: 580 mm, spindle speed (max.): 5,000 rpm, controller model: Mazatrol Fusion 640 MT, milling spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Max. turning diameter: approx. 580 mm Max. machining diameter: approx. 520 mm Max. turning length: approx. 1,000 mm Main spindle speed: up to 5,000 rpm Milling spindle speed: up to 12,000 rpm MACHINE DETAILS CNC control: Mazatrol Fusion 640 MT Bdedpfjz Inaijx Airoi EQUIPMENT Main spindle Milling spindle with B-axis Y-axis C-axis Chip conveyor Documentation, if available Coolant system Tool changer: automatic

Condition: excellent (used), Year of construction: 2000, CNC Lathe MAZAK SUPER QUICK TURN 200 Year of manufacture: 2000 Working area: Max. swing diameter: 525 mm Max. turning diameter: 350 mm Max. turning length: 514 mm Bar work up to max. diameter: 51 mm Main spindle: Speed range: 35 – 5,000 rpm Main drive power: 18.5 kW Constant torque: 333 Nm Spindle nose: A2 – 6 inch Spindle bore: 61 mm Turret: Standard version: 12 stations Travel: Turret travel: X-axis: 190 mm Z-axis: 535 mm Bdjdpfxjxvb E Dj Airei