Used Mazak Lathe for sale (319)

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Lajdpfxjx S Hm Io Ackeb Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Weight: 14000kg

Condition: excellent (used), Year of construction: 2007, operating hours: 5,217 h, turning length: 285 mm, spindle bore: 91 mm, travel distance X-axis: 1,000 mm, travel distance Z-axis: 285 mm, spindle motor power: 26,000 W, total height: 2,200 mm, total length: 3,200 mm, total width: 2,300 mm, overall weight: 6,600 kg, CNC Lathe MAZAK - QTN 300-II MACH-ID 9480 Make: MAZAK Type: QTN 300-II Control: Mazatrol Matrix Nexus Year: 2007 No Tailstock Automatic doors Tool eye Chip conveyor Max. turning Ø:830mm X-Axis: 1000mm Z-Axis: 285mm Spindle bore: 91mm Speedrange: 5000Rpm Spindle power: 26kW Hours: 5217H Length: 3200mm Width: 2300mm Ledpfx Ajyyxlfsckjab Height: 2200mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2007, turning length: 535 mm, spindle bore: 65 mm, travel distance X-axis: 225 mm, travel distance Z-axis: 535 mm, spindle motor power: 26,000 W, total height: 1,900 mm, total length: 2,900 mm, total width: 2,300 mm, overall weight: 4,380 kg, CNC Lathe MAZAK - QTN 200-II MACH-ID 9481 Make: MAZAK Type: QTN 200-II Control: Mazatrol Matrix Nexus Year: 2007 Max. turning Ø:610mm X-Axis: 225mm Z-Axis: 535mm Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 26kW ATC / revolver:12 Lsdpfjyyxh Tex Acksab Chip conveyor: Yes Tool eye: Yes Hours: 5049H Length: 2900mm Width: 2300mm Height: 1900mm Weight: 4380kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2011, CNC Lathe with y-axis MAZAK - QTN 250 MY MACH-ID 9483 Make: MAZAK Type: QTN 250 MY Control: Mazatrol Matrix Nexus Year: 2011 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Lodpfxeyyxzme Ackoab

Condition: excellent (used), Year of construction: 2008, CNC Lathe with c-axis MAZAK - QUICKTURN NEXUS 250-IIM MACH-ID 9490 Make: MAZAK Type: QUICKTURN NEXUS 250-IIM Lodpfx Asyz Stljcksab Control: Mazatrol Matrix Nexus Year: 2008 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2003, Max. turning dia. 320 mm Max. turning length 450 mm Laodpoyhzfgjfx Acksb Spindle speed 5000 rpm Spindle speed on live tools 4500 rpm X/Z - 240/495 mm Y-axis +/- 50 mm No. of stations in turret 2 x 12 pcs Control: Mazatrol PC-Fusion 640 T Equipped with: Gantry loader w/feeder

Condition: used, Year of construction: 2006, Turning length 1500 mm Max. turning dia. 420 mm Spindle bore 105 mm Spindle speeds 3300 rpm Spindle speeds on live tools 3000 rpm Turret w/12 stations Hydraulic tail stock Control: Mazatrol 640 T Nexus Equipped with: Lasdpfxjx Nfwgj Ackjb Magazine bar feeder FMB SL 80 3 pcs. live tools Various tool holders

Condition: used, Year of construction: 2002, Max. diameter 430 mm Ljdpfx Ajxfcbfjckeab Max. length 600 mm Max. spindle speeds 4000 rpm Max. spindle speed on live tools 4000 rpm X/Z travel - 310/605 mm 2 x 12 station turrets Control: Mazatrol PC Fusion 640 T Equipped with: Various toolholders

Condition: used, Year of construction: 2003, Turning length 1000 mm Spindle bore 65 mm Max. turning dia. 300 mm Spindle speeds 4000 rpm Spindle speeds on live tools 4000 rpm Turret w/12 stations Control: Mazatrol 640 T Nexus Equipped with: 3 pcs. live tools Various tool holders Lajdpsx N A I Nefx Ackeb

Condition: ready for operation (used), Year of construction: 2006, operating hours: 13,006 h, functionality: fully functional, machine/vehicle number: 190433, turning length: 1,050 mm, turning diameter: 660 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 1,050 mm, controller model: Mazatrol Matrix, The technical data is based on manufacturer specifications. The seller cannot guarantee its accuracy! Operating times according to control system: Total: 5,025 h Automatic machining: 1,866 h Pure machining RV1: 1,037 h Pure machining RV2: 298 h Operating time: 13,006 h Tool type: Capto C6 Tool changer: 72 positions Turret: 9 positions TECHNICAL DETAILS Max. turning diameter: 660 mm Diameter over bed: 760 mm Turning length: 1,050 mm X-axis: 580 mm Y-axis: 150 mm Z-axis: 1,050 mm Main spindle speed: 5,000 rpm Counter spindle speed: 5,000 rpm Milling spindle: 12,000 rpm MACHINE DETAILS Control system: Mazatrol Matrix Main circuit: 3AC Main circuit voltage: 400 V Frequency: 50/60 Hz Control circuit AC: 100 V Control circuit DC: 24 V Main motor current draw: max. 84 A Main motor voltage: 400 V Rated power: 91.8 kVA Laedpfxjy Slqfj Ackob Weight: 11,800 kg

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 178979, turning length: 309 mm, turning diameter: 280 mm, travel distance X-axis: 190 mm, travel distance Z-axis: 330 mm, controller model: Mazatrol 640T Nexus, No reserve price – guaranteed sale to the highest bidder! The technical data is sourced from the manufacturer's information. The seller assumes no liability for its accuracy! TECHNICAL DETAILS Max. turning diameter: 280 mm Max. machining length: 309 mm Swing diameter: 550 mm X-axis travel: 190 mm Z-axis travel: 330 mm Spindle bore: 61 mm Rapid traverses X/Z: 30/33 m/min MACHINE DETAILS Control: Mazatrol 640T Nexus Main power circuit: 3AC Main circuit voltage: 400 V Frequency: 50/60 Hz Control circuit AC: 100 V Control circuit DC: 24 V Main motor current: 31 A Main motor voltage: 400 V Rated power: 24 kVA Weight: 3,500 kg Laodpfxoy Sln Rj Ackob Note: The bar feeder is not included in the offer.

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 265771, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 195 mm, travel distance Y-axis: 560 mm, workpiece weight (max.): 20 kg, The technical data is based on manufacturer specifications. The seller cannot guarantee its accuracy! TECHNICAL DETAILS Travel X-axis: 195 mm Travel Z-axis: 560 mm Maximum spindle speed: 5,000 rpm Rapid traverse X-axis: 30 mm/s Rapid traverse Z-axis: 33 mm/s Maximum turning diameter: 350 mm MACHINE DETAILS Control: Mazatrol Smart Main power circuit: 3-phase AC Main power circuit voltage: 400 V Frequency: 50/60 Hz Control circuit AC: 100 V Control circuit DC: 24 V Main motor current consumption: max. 53 A Main motor voltage: 400 V Rated power: 29.1 kVA Dimensions & Weight Machine dimensions (L x W x H): 2,650 x 1,700 x 1,700 mm Machine weight: 4,500 kg Lsdpfx Acey Saiiekjab

Condition: like new (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL 640M 5X, controller model: MAZATROL 640M 5X, workpiece height (max.): 405 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 300 kg, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, spindle nose: CAT40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, *MAZAK VARIAXIS 500-5X 5 AXIS TWIN PALLET VMC* Category: Vertical Machining Centers (VMC) Reference No.: 3877 Capacity: 510 X 510 X 460 MM Year of Construction: 2003 Technical Specification: SPINDLE Spindle Taper : CAT40 Spindle Speeds : 12000 RPM Spindle Motor Power : 30 HP WORKING CAPACITY Pallet Size : 500 x 400 mm Travels (XYZ) : 510 x 510 x 460 mm A Axis : -120 / +30 Deg C Axis : 0.001 Deg Max Workpiece Size : Ø500 x 405 High Max Workpiece Weight : 300 Kgs ATC Tool Change Capacity : 40 Tools (CAT40) CNC Control : MAZATROL 640M 5X PC-FUSION-CNC Additional Details: Twin Pallet Lasdpfx Acjx Adn Uoksb

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Laodpfxox Rkvqj Ackeb Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

Condition: excellent (used), Year of construction: 2009, MAZAK Quick Turn Nexus 100-II M Mazatrol Matrix Nexus control C-axis with driven tools 6-inch chuck Kitagawa BB206 Spindle bore 51 mm Max turning diameter 280 mm Z-axis 385 mm X-axis 185 mm Max spindle speed 6000 rpm Ljdpfxoyhh Drj Ackeab Max driven tool speed 4500 rpm 12-position turret Programmable tailstock Tool probe Parts catcher with the machine: - 4 driven tools (2 left, 2 right) - 8 standard tool holders - chip conveyor - documentation Operating hours: 3180 hours

Condition: excellent (used), Year of construction: 2008, 2-axis CNC lathe MAZAK QTN 100II Mazatrol Matrix Kitagawa BB206 chuck Spindle bore 51mm Turning length 310mm Turning diameter 280mm X-190mm Z-330mm Max spindle speed 6000 rpm Laodpeyvzwvofx Ackeb 12-position turret Tool probe Tailstock Included with the machine: -coolant tank with pump -documentation

Condition: excellent (used), Year of construction: 2014, operating hours: 4,300 h, functionality: fully functional, Control: MAZATROL SMART Table dimensions: 900 x 430 mm T-slots in the table 3x18x125 mm Max. table load: 500 kg X-travel: 560 mm Y-travel: 430 mm Z-travel: 510 mm Max. spindle speed: 12000 rpm (Direct drive) Taper: SK40 Rapid traverses X/Y/Z: 42 / 42 / 42 m/min Feed rates: 1 - 8000 mm/min Drive power: 18.5 / 11 kW Power requirement: 400V / 50-60 Hz / 32A Weight: 4600 kg Dimensions LxWxH: 2080 x 2616 x 2780 mm Accessories, Equipments - MAYFRAN chip conveyor - Coolant system - Spindle through air - ITS (Intelligent thermal shield) heat compensation system - Tool presetter - Signal tower - Transformer Ledjy Snnmopfx Ackoab The machine can be found in almost new condition. Unter power in Hungary.

Condition: good (used), Year of construction: 2020, 5-axis CNC machining center - universal - Manufacturer: MAZAK Machine model: Variaxis J-500 Control system: Mazatrol SmoothG Year of manufacture: 2020 Number of controlled axes: 5 TECHNICAL DATA Travel ranges - X-axis: (mm) 350 - Y-axis: (mm) 550 - Z-axis: (mm) 510 - Swivel range A-axis: (degrees) -120 / +30 - C-axis (rotary and swivel table): (degrees) 360 Feed rate X/Y/Z: (mm/min) 8,000 Rapid traverse rates - X-axis (mm/min) 30,000 - A-/C-axis: 10,800 degrees/min Spindle - Spindle speed max.: (rpm) 12,000 - Drive power (ED) 100 / 40: (kW) 7.5 / 11.0 Tool magazine - Tool holder: BT40/CAT40 - Pull stud: Yamazaki ANSI type - Tool positions: 30 - Tool diameter: (mm) 90 - Tool length: (mm) 300 Machine table Swivel rotary table Laedpfxjy Txrxs Ackob Pallet system - Pallet changer: 2-position - Clamping table dimensions: (mm) 500 x 400 Swivel rotary table - Rotary table diameter: (mm) 500 x 400 - Max. workpiece weight: (kg) 200 EQUIPMENT FEATURES + Internal cooling system 70 bar + Chip conveyor with scraper band + Oil mist extraction + Tool length measurement and tool breakage monitoring + Additional interior lighting + Signal light (3-color) Subject to changes and errors in the technical data and specifications.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 4,220 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 1,300 mm, table length: 550 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis Mazak VERTICAL CENTER NEXUS 510C-II INFO was manufactured in 2008. It features a Mazatrol Matrix Nexus control unit and has a total operating time of 17,659 hours. The machine is equipped with advanced software options, including high smoothing control and various machining cycles. If you are looking to get high-quality machining capabilities, consider the Mazak VERTICAL CENTER NEXUS 510C-II INFO vertical machining centre we have for sale. Contact us for further details. - Total Operating Time: 17,659 hours 12 minutes 03 seconds (Recorded on 2026/02/19)- Automatic Cutting Time: 6,129 hours 38 minutes 37 seconds- Automatic Machining Time: 5,877 hours 48 minutes 01 seconds- Operating Time / Power On Time: 26,902 hours 54 minutes 33 seconds- Feed Rate Override Display: 50%- Feed Speed Display: 150 mm/min- Electrical Drives/Servo System: Mitsubishi Electric MDS series (400V system)- Additional System Interfaces: Renishaw Machine Interface MI12 (integrated inside electrical cabinet for probe system)- Safety Module: Mazak Safety Relay Module (QS-VMI100R-10)- Installed Options (Software/NC Options Enabled):* EIA / EIA 3D Comp. / EIA Herical Tap Cycle / EIA Pattern Cycle* High Smoothing Control* Spiral* Rotation* Geometric* Scaling* Ext-Data I/O* Inverse Time* Auto TLM* Polar Coordinates Input* Comparison Stop* G54.1* Sync. Mill Tapping / Sync. Main Sp. Tapping* Inch/MM Convert* G00 Slope Const.* Scale Feed Back* Variable 600 Sets* IC Card Running* Tilted Working Plane* Re-Thread* Pitch Error Comp.* Tap Retraction- Coolant/Hydraulic Accessories: External tank base with dual motor-pump units and filtration assembly (including a manual visual indicator pressure/bypass filter)- Extraction/Exhaust Accessories: Fitted with a flexible corrugated overhead extraction duct (mist/smoke extractor hose connection) Ledpfxjy T Hbzs Acksab

Condition: excellent (used), Year of construction: 2017, MAZAK QUICK TURN 250MY Max. turning diameter: 380 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar capacity: 80 mm Lasdpfx Acsyki Tajkob Machine is equipped with: - Mazatrol SmoothG CNC control - KITAGAWA three-jaw chuck BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - automatic parts catcher - interface for bar feeder - signal light (3-color LED) - reinforced coolant pump - chip conveyor - standard MAZAK tool package

Condition: used, Year of construction: 2006, Control system: Mazatrol 640 T Nexus Working area: - Max. swing diameter: 675 mm - Max. swing diameter over slide: 276 mm - Max. turning diameter: 380 mm - Max. turning length: 538 mm - Max. bar capacity: Ø 65 mm Main spindle: - Max. speed: 35–5,000 rpm - Main drive power, integrated spindle motor: 26 kW / 22 kW - Max. torque: 350 Nm - Spindle nose: A2-6" - Spindle bore: Ø 76 mm - Chuck diameter: Ø 210 mm - Indexing, C-axis: 0.001° Tool turret: - Number of tool stations: 12 Travel: Lodpfey Sxkljx Acksab - X-axis: 230 mm - Y-axis: 100 mm - Z-axis: 575 mm Coolant: - Tank capacity: 160 l Travel speeds: - Rapid traverse X-axis: 30 m/min - Rapid traverse Y-axis: 21 m/min - Rapid traverse Z-axis: 33 m/min Tailstock: - Mounting: MK 5 - Tailstock travel: 550 mm Scope of delivery: - Existing manuals as shown in the pictures - 8 driven tool holders - 13 static tool holders - LNS Quickload Servo III bar feeder - Coolant system - Chip conveyor Dimensions & Weight - Approx. footprint L x W x H: 6015 x 2000 x 1900 mm - Approx. weight: 5600 kg Control system: Mazatrol 640 T Nexus * Max. swing diameter: 675 mm * Max. turning diameter: 380 mm * Spindle nose: A2-6" * Max. turning length: 538 mm * Max. bar capacity: Ø 65 mm * Max. speed: 35–5,000 rpm * Max. torque: 350 Nm * Spindle bore: Ø 76 mm * Indexing, C-axis: 0.001° * X-axis: 230 mm * Y-axis: 100 mm * Z-axis: 575 mm * Tank capacity: 160 l * Rapid traverse X-axis: 30 m/min * Rapid traverse Y-axis: 21 m/min * Rapid traverse Z-axis: 33 m/min * Mounting: MK 5 * Tailstock travel: 550 mm * Approx. weight: 5600 kg

Condition: used, Year of construction: 1996, x-travel 1500 mm y-travel 650 mm z-travel 650 mm size of pallet 1740 x 650 mm spindle taper SK 50 spindle turning speed range 25 - 6000 U/min feeds longditudinal/cross/vertical max. 8 mm/min rapid traverse longitudinal and cross 26 m/min Lajdpfxeyg N She Ackjb rapid traverse vertical 20 m/min spindle throat 665 mm distance spindle nose and table 200 / 850 mm drilling in full material 50 mmø threading M 45 ATC 60 Pos tool diameter 125 mm wotkpiece diameter with 2 vacant positions 260 mm workpiece length 400 mm weight of tools max. 20 kg spindle drive 18,5 kW control MAZATROL M PLUS Accessories: chip conveyor, coolant

Condition: used, Year of construction: 1998, x-travel 1120 mm y-travel 510 mm z-travel 510 mm control Mazatrol M Plus spindle turning speed range 0-7000 U/min Lsdpfxoy Ty Eao Ackeab tool taper Cat 40 tool piece magazine with 24 Plätzen max. table load 500 kg table dimensions (lengthxwidth) 1460 x 510 mm Overall size 3600x2700x2590 mm machine weight ab. 5850 kg Equipment/Accessories: - 4 vices - 1 chuck - 18 tool holders with tools - Transport locks - USB flash drive with data backup - Technical documentation

Condition: used, Year of construction: 2002, turning diameter max. 300 mm turning length max. ca. 550 mm control PC Fusion CNC 640 T standard turning dia. 276 mm swing diameter max. 525 mm Distance Spindlenose - turret face 115 - 690 mm turning speed range - main spindle 35 - 4.000 min/-1 power capacity - main spindel 22 kW max. Torque 351 Nm spindle nose A2-6" spindle bore 76 mm max. usable bar diameter 64 mm chucking diameter max. 250 mm C-Axis 360 ° number of toolpositions 12 pos. tool taper VDI 40 Shank diameter 25 mm Drill shank diameter 40 mm turret change time 0,2 / 0,6 sec. Spindle speed - driven tool pos. 25 - 4.500 min -1 power capacity - driven tool pos. 3,7 kW max. Torque 35 Nm Spindle speed range subspindle 35 - 4.000 min/-1 power capacity - Sub spindle 7,5 kW max. Torque 57 Nm chucking diameter max. 150 mm x-axis 190 (185 + 5) mm z-axis 575 (580 + 5) mm Traverses Subspindle B: 585 (580 + 5) mm C-Axis 360 ° rapid traverse X/Z: 30 m/min rapid traverse C: 400 min/-1 rapid traverse B: 18 m/min feed range X/Z: 0 - 5.000 mm/min feed range C: 1 - 2.000 °/min total power requirement 34 kVA weight of the machine ca. 5,9 t dimensions of the machine ca. 5,0 x 3,0 x 2,5 m CNC - Turning- and MillingCenter MAZAK - Super Quick Turn 250 MS - Main- and Subspindle Ljdpfexmagujx Ackeab - Tool-Drive - C-Axis

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 141643, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 20 m/min, controller manufacturer: MAZAK, controller model: MAZATROL M PLUS, total height: 2,250 mm, total length: 4,400 mm, total width: 2,400 mm, table width: 510 mm, table length: 1,460 mm, table load: 500 kg, overall weight: 6,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,000 rpm, number of slots in tool magazine: 24, mount diameter: 40 mm, tool length: 350 mm, tool diameter: 80 mm, tool weight: 8,000 g, Equipment: chip conveyor, MAZAK VTC-20 B Vertical Machining Center - Tool holder: SK 40 - Max. distance from the spindle face to the clamping surface: 690 mm - Cutting feed rate X/Y/Z: 1 - 5000 mm/min - Max. tool diameter: 80 mm with an occupied adjacent position - Max. tool diameter with a free adjacent position: up to 110 mm - Incl. chip conveyor MAYFRAN - Incl. the tool holders located on the tool changer - Note: the machine vise clamped on the table is not included in the scope of delivery! Note: the item must be collected between July 14th and July 16th, 2026, on a date to be agreed upon. Lajdpsy Twcvofx Ackob FCA D-45883 Gelsenkirchen - loaded onto a truck.