Used Mchale V 660 for sale (16,322)

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 5,075 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.0175 Ksdpfx Aaexz Ty Rsnjfa Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initial lift: Yes Cabin width: 1200 mm Year: 2015 Hours: 5075 h Battery capacity: 48V / 620Ah – Year 2021 Options: FULLY equipped!! – Triplex mast – FFL – SAFETY doors with TILT FUNCTION!! – Adjustable forks! – PSA (Sick) – Induction / Wire Guidance – End position sensors on mast Condition: LIKE NEW!!!

Condition: excellent (used), Year of construction: 2018, Used 5-axis CNC machining center including edge banding Manufacturer: HOMAG Model: PROFI BMG310/42/F/V/K Year of manufacture: 2018 Main spindle overhauled by Benz GmbH Working area X: 4200 mm (4375 mm with tool diameter 25 mm) Working area Y: 1350 mm for all units - Milling with tool diameter 25 mm: 1600 mm - PowerEdge: 1600 mm Workpiece thickness: 300 mm Equipment: - Speed Pack - 32-position disc tool changer (24+8) - 10-position disc tool changer - 8-position linear tool changer - Processing spindle 12 kW Drive5C - Spindle vibration visualization - Drilling head with 31 spindles: Vertical 21 / Horizontal 10 / 0° / 90° Ksdpfx Aew H Nzdeanjfa - Additional milling spindle 6 kW for drilling head - Blowing nozzle for workpiece edge, 60 mm - PowerEdge edge banding unit - Pre-trimming station and double roller BMG310/V - Additional roll plate for pre-trimming station KH 65 mm - Pneumatic lift for drive spindle - Saw/trimming unit for tool changer - Combination flush trimming and scraper unit - LED positioning display system - PowerClamp fixture interface for console table - Dynamic nesting management - Vacuum system 290/345 m³/h - PowerControl PC87 Powertouch - Collision control - Tool length measuring system - WoodWop component Lamello Clamex-P - Chip conveyor - SafeScan for Speed Pack BMG And much more. Complete technical data available in the attached PDF document.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 22207, Marinus Machines V&G 400 Series,Through Feed End Matching Machine,Serial Number 22207, Year of Manufacture 2000 In very good working condition. Maximum working length up to 6m, minimum working length: 500m/m Kfsdpfov Er Niex Aanja Minimum working width: 50m/m, normal maximum width: 280m/m, 300m/m is possible with some adjustment of the tools. Total Power: Appr: 20kw, Feed Speed up to 20 pieces per minute,depending on length. Omron PLC Controls. Floor Size: W x D x H 2000 x 1650 x 1900m/m, Weight: Appr. 1750kg. Also with the machine is a 3m. Long Belt Conveyor, which could be used at the Infeed or Outfeed of the machine. Complete Safety Enclosure. With Operational & Electrical Manual. Location: Can be viewed in Burrowbridge,Somerset TA7 0SG Photos Available on your email or Mobile Phone WhatsApp.

Condition: refurbished (used), Year of construction: 1988, Ingramatic RP1V: M6x75/40 mm. 230-600 ppm. Also available with Washer. Completely overhauled to new. Machine visible in Calolziocorte (LC). OVERHAUL TO CE STANDARD. Overhaul includes: - DISASSEMBLY AND CLEANING OF EACH OF ITS PARTS - REPLACEMENT OF ALL BEARINGS - GRINDING GUIDES OR EVENTUAL REPLACEMENT IF NOT IDONEE - OVERHAUL OF INTRODUCER GROUP Kodoh Riuuspfx Aanefa - OVERHAUL OF SLIDE ASSEMBLY WITH REPLACEMENT OF LARDONS IN BRONZE - NEW LUBRICATION SYSTEM WITH CONTROL UNIT HYDRAULIC UNIT COMPLETE WITH PUMP, LEVEL SWITCH, PRESSURE SWITCH AND DIVIDERS - NEW WATER PUMP FOR COMB - NEW Ø670 CUP VIBRATOR COMPLETE WITH PANEL VIBRATOR CONTROL AND PHOTOCELL FOR OVERFLOW - REVISED ROLLER EVACUATION UNIT - PROTECTIVE CASING COMPLETE WITH LAMP AND MICRO - SOLENOID VALVE INSTALLATION WITH NEW AIR SYSTEM FOR VIBRATOR AND GUIDES - NEW ELECTRICAL SYSTEM ACCORDING TO CE STANDARDS COMPLETE WITH INVERTER - NEW MOTOR - BELTS REPLACEMENT - PAINTING RAL FROM YOU INDICATED

Condition: good (used), Code: 0419 Brand: ITALPRESSE Kfodpfsu A S Haox Aanoa Model: V/2 Electric press for cold gluing of doors, furniture, panels, composite materials, technical materials, plastics, aluminum, various materials Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2500 x 1200 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2850 x 1200 x 1650 h Weight kg 880

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.239, Distance between columns 2.750 mm, Distance top of table to spindle nose 1.600 mm, fixed cross rail, 2 tables 2.500 x 4.000 mm, coupled 2.500 x 8.700 mm, power 58 kW, revs 1 – 1.800 rpm, base speed 136 rpm, max. torque 3.500 Nm, feeds and rapids 1 – 10.000 mm/min, traverses x y z 9.502 x 5.515 x 1.000 mm, quill movement 500 mm in 4 steps, automatic tool changer with 60 pockets, automatic mounting, 4 x 90° indexing and heel clearance for RAA Electric and mechanic remanufacturing in 2017 with • New CNC control SINUMERIK 840 D or at your choice • New electric cabinet • New wiring • New motors for all axis and main spindle • New measuring system HEIDENHAIN LB 382 • Milling carriage general overhauled Kjdodkmihspfx Aanefa • New painting

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 4,059 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Kedpexz Ty Defx Aanofa Mast: 3F9450 ID: 23106.0180 Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Platform height: 8900 mm Picking height: 10500 mm Initial lift: Yes Cabin width: 1200 mm Year: 2015 Hours: 4059 hours Battery: 48 V / 620 Ah - Year 2021 Options: FULL options!! - Triplex mast - FFL - Safety doors with tilt function!! - Adjustable forks! - PSA (Sick) - Induction / wire guidance - End position sensors on the mast Machine LIKE NEW!

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Data Machine type: HTG 610 U Workhead: MK5 Tailstock: MK3 Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel left: 350 x 50 x 127 mm Kodpfx Ajcgtp Esansfa Grinding wheel right: 250 x 25 x 127 mm Condition The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification.

Condition: good (used), workbench, work table, assembly bench, assembly table, work table -Workbench: steel frame -Width: 730 mm -Depth: 660 mm -Height: 785 mm -Worktop: screen-printed board Kedpfswx Hkgex Aanjfa -Weight: 43 kg

Condition: like new (used), OVERHAULED “GFT KSS-24/70-2-2018 .” for Sale Also many other manufacturers like: ThyssenKrupp / BOA / Metso / Allis-Chalmers / Skett / Siebtechnik Find our complete stock on our website. Manufacturer: GFT Type: 24/70-2-2018 Size: 2.400mm x 7.000mm Decks: 2 Year of manufacture: 2006 Overhauled. With new bearings. Included: – Electrical Motor – Springs Vibrating screen is sandblasted, painted and ready for use! Kfodpfxsggfk Ho Aanea

Year of construction: 2024, condition: new, functionality: fully functional, With the V.0102-gn, FOBA offers a marking laser in the green spectrum (532 nm wavelength) with low heat exposure. Thanks to 10 watts of laser power, markings can be applied with outstanding speed and contrast sharpness on surfaces that cannot be sufficiently marked with other wavelengths. This includes many white and transparent plastics, highly reflective metals and material combinations. Even red or orange plastic surfaces, which often offer poor contrast due to their color properties, receive perfectly legible codes and characters. The marking quality is also impressive on special plastics such as UHMWPE, HDPE and PMMA. In most cases, the green lasers also make laser additives superfluous. Kodpfot Etkkex Aansfa The FOBA V.0102-gn marking laser closes the gap between UV (355 nm) and fiber (1064 nm) laser systems and thus addresses the most challenging marking applications. The V.0102-gn is used in automotive and aircraft construction, as well as in medical technology, electronics, extrusion, but also in the marking of sensitive materials such as ceramics, flame-retardant plastics, plastics and materials for invasive purposes.

Condition: new, New device Enmair Electro-pneumatic sprue picker ER available immediately from stock ER series type 650 Application range of 5 ton injection molding machine Horizontal travel 650 mm Vertical travel 125 mm Swivel angle 5 Gripper angle ° Lifting weight approx. 3kg Bracket on the back enables easy adjustment of the Swivel angle to the right / left, as required Kfsdpfjr A D Itjx Aansa Required operating air pressure 5 - 7 bar 220V 50 Hz Device can be offered with Euromap 12 or Euromap 67 plug, depending on the pre-installation on the injection molding machine. User interface: English, Dutch

Condition: like new (used), Year of construction: 2015, load capacity: 1,200 kg, lifting height: 9,450 mm, construction height: 3,900 mm, operating hours: 3,483 h, fuel type: electric, mast type: triplex, Manufacturer + model: LINDE V (5213) Mast: 3F9450 ID: 23106.016 Ksdpfxexz Tywj Aanjfa Category: Used Mast: 3F Lowered height: 3900 mm Lifting height: 9450 mm Capacity: 1200 kg Picking height: 10500 mm Initial lift: Yes Cabin width: 1200 mm Year: 2015 Operating hours: 3483 hours Battery capacity: 48 V / 620 Ah - Year 2021 Options: FULLY equipped!! - Triplex mast - FFL - SAFETY doors with TILT FUNCTION!! - Adjustable forks! - PSA ( Sick ) - Induction / wire guidance - End position sensors on mast Complete LIKE NEW!!!

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Roland 305 +L+V+T Year: 1997 120 million 5-0 / 1-4 Kfodpfx Aaowtz Uisnsa Accessories included: Double sheet electronic control Suction air table Antistatic system PPL semi-automated plate changing RCI central control desk, remote-controlled circumferential adjustment Rolandmatic dampening with refrigeration recirculation for dampening prepared for Ink Temperature Control Coating unit IR dryer Powder spray Steel plate in delivery High pile delivery Sheet de-curler

Year of construction: 1986, condition: used, DC motor, servo motor, gear motor, electric motor, direct current gear motor Ksdpfx Aaeb R Ua Uonofa -Speed: 30-3000 rpm -Power: 0.07-7.5 KW -Construction: B5 -Diameter shaft: Ø 50 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 1160/370/H530 mm -Weight: 222 kg

Condition: like new (used), Year of construction: 2018, load capacity: 1,200 kg, lifting height: 7,150 mm, construction height: 2,900 mm, operating hours: 1,675 h, fuel type: electric, mast type: triplex, Manufacturer + model:LINDE V ( 5213 ) Mast:3F7150 ID:23076.5043 Cat.:Used Mast:3F Lowered height:2900 mm Lifting height:7150 mm Capacity:1200 kg Platform height:6600 mm Picking height:8200 mm Init.:Yes Cabin width:1200 mm Year:2018 Hours:1675 hours Capacity:48 v / 465 ah Kedpfx Aaoxz Tykjnofa Options:- Mast Triplex - FFL complete LIKE NEW !!!

Condition: used, DC brake, braking device, electric motor brake -Manufacturer: AER Statomat -Type: D 6225/V -Current: 200+50 amps -Operating voltage: 380 V AC -Number: 1x power supply available Kfedpfx Ajd Dh A Ijanea -Price: per piece -Dimensions: 160/215/H155 mm -Weight: 3.2 kg

Condition: new, Year of construction: 2019, load capacity: 1,200 kg, lifting height: 5,950 mm, construction height: 3,410 mm, operating hours: 3 h, fuel type: electric, mast type: duplex, Manufacturer + model LINDE V ( 5213 ) Mast 2W5950 ID 23079.5136 2W mast Kfodpfexz Txajx Aanea Lowered height 3410 mm Lifting height 5950 mm Capacity 1200 kg Platform height 5350 mm Picking height 6950 mm Cabin widht ; 1200 mm Year 2019 Hours 3 hours Capacity 48 v / 465 ah OptionsFULL options !!! - SAFETY doors with NEIG FUNCTION !!! - Equipped with side guidance ( INCLUDING side roll / wheels !!! )Complete NEW / Unused !!!

Condition: used, Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Drawers: 2 Kodpfx Aaob Imxvonofa -Storage: 1 -Brackets for: SK40/SK50 milling holders -Dimensions: 660/1030/H1200 mm -Weight: 190 kg

Condition: new, Year of construction: 2017, load capacity: 1,000 kg, lifting height: 4,200 mm, construction height: 2,900 mm, operating hours: 4 h, fuel type: electric, mast type: duplex, Manufacturer + model LINDE V ( 5213 ) Mast 2W4200 ID 22073.7130 2W mast Forks 1450 x 620 mm Lowered height 2900 mm Lifting height 4200 mm Capacity 1000 kg Platform height 4350 mm Picking height 5950 mm Year 2017 Hours 4 hours Capacity 48 v / 465 ah Options Kedpfjxz Twpox Aanofa DEMO !!! NEW / UNUSED !!!!Cabin = 1100 mm equipped with side guidance ( INCLUDING side roll / wheels )

Condition: used, Gear motor, electric motor, three-phase motor -Manufacturer: Gearbox Bonfiglioli type MVF86/V -Speeds: 19 rpm -Drive: emod type B80L/4X K4 -Power: 1.5 kW 1360 rpm -with brake: 4 Nm -Construction: B5 angle -Shaft: Ø 35/40/85 mm -Protection class: IP 54 -Number: 1x motors available Kodpfod Tlx Dox Aanofa -Price: per piece -Dimensions: 290/280/H565 mm -Weight: 37 kg/piece

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1000040377, total length: 2,000 mm, total width: 2,500 mm, total height: 2,100 mm, Equipment: CE marking, documentation/manual, MACHINE DETAILS Main motor power: 10 kW Voltage: 400 V Current consumption: 18 A Fuse: 32 A Output: 10.0 kW Dimensions (L x W x H): 2,000 x 2,500 x 2,100 mm Shipping units: 2 pieces EQUIPMENT Saw unit Documentation Electrical schematics User manual Ksdpsx Hhc Hsfx Aanefa CE marking

Condition: ready for operation (used), Year of construction: 2002, General Data Machine weight 6800 kg Control Unit Brand SIEMENS Main Drive Number of axis 3 Movement X-Axis Movement 640 mm Z-Axis Movement 500 mm Y-Axis Movement 600 mm Kodpex H Uzijfx Aansfa This 3-axis DMG DECKEL MAHO DMC 64 V linear was manufactured in 2002. It features a 640 mm X-axis, 600 mm Y-axis, and 500 mm Z-axis. The table size is 850 x 600 mm, equipped with a 30-tool magazine and SK40 taper. It operates with a Siemens control system and weighs 6,800 kg. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMC 64 V linear machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2000, functionality: fully functional, clamping force: 7,500 kN, Equipment: documentation/manual, Engel ES4550/750K-V (2000) Injection Moulding Machine – Technical Data • Screw diameter: 90 mm • Shot volume (max.): 2480 cm³ Kjdpox Iu U Ejfx Aanjfa • Injection rate (theoretical): 530 cm³/s • Specific injection pressure: 1910 bar • Increased injection pressure: 2180 bar • Plasticising capacity (standard screw): 70 g/s • Plasticising capacity (barrier screw): 118 g/s • Screw L/D ratio: 20 (standard) / 24 (barrier) • Screw speed: 140 rpm • Heating power: 67 kW • Number of heating zones (incl. nozzle): 7 Clamping Unit • Clamping force: 7500 kN • Holding force: 8250 kN • Opening stroke: 900 mm • Mould height min./max.: 400 – 1120 mm • Max. daylight: 2020 mm • Platen size (H × V): 1500 × 1390 mm • Tie bar spacing (H × V): 1025 × 925 mm • Tie bar diameter: 170 mm • Ejector stroke / force: 250 mm / 110 kN Weights & Power • Drive power (hydraulic pump): 75 kW • Oil volume: 1000 l • Injection unit weight: 10 t • Clamping unit weight: 30 t • Net machine weight (without oil): 40 t

Condition: ready for operation (used), Year of construction: 2009, operating hours: 13,230 h, Control Unit Brand SIEMENS Main Drive Kjdpfx Aaox H Uzpenofa Number of axis 3 Movement X-Axis Movement 635 mm Z-Axis Movement 460 mm Y-Axis Movement 510 mm This 3-axis DMG DMC 635 V eco was manufactured in 2009. It features a table size of 790x560 mm and a spindle speed of 8000 RPM, controlled by SIEMENS 810D. X-axis travel is 635 mm, Y-axis is 510 mm, and Z-axis is 460 mm. If you are looking to get high quality milling capabilities consider the DMG DMC 635 V eco machine we have for sale. Contact us for more information. Application Types Milling