Used Merlo Dbm 3500 Ev for sale (76)

Condition: used, Year of construction: 2025, operating hours: 122 h, Operating hours: 122, First registration: 08.10.2025 Maximum lifting capacity: 3,000 kg Maximum lifting height: 6,700 mm Maximum outreach: 3,800 mm Length to attachment carrier: 4,510 mm Width: 2,000 mm Height: 2,120 mm Total weight with forks: 6,620 kg Total weight without forks: 6,450 kg Engine: 4-cylinder Deutz TCD 2.9 2.9 L displacement, water-cooled Power: 75 kW (101 hp) 2,600 rpm Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement motor EPD PLUS including optional automatic rpm increase Mineral hydraulic oil HVI 46 Transmission: 2-speed Electrohydraulic control Vmax = 1st / 2nd gear = 16/20 km/h, optional 40 km/h Cab: Fully enclosed cabin, split door 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 joystick, electronic with capacitive release and travel direction switch Telescopic boom: 2-section with electronic end position cushioning (Soft Stop) Attachment carrier: Quick-change system type “ZM2” hydraulically controlled from the cab Steering: Hydraulic steering 3 steering modes: four-wheel, front-wheel, crab steering Drive: Permanent all-wheel drive Axles: Front axle rigid Rear axle oscillating Braking system: Servo-assisted disc brakes on all four wheels Automatic parking brake when engine is off Hydraulic system: Load-sensing pump with variable output Total flow: 100 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12V battery with 100 Ah Alternator 120A Stabilization control: Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, attachment recognition and overload cut-off Tyres: 400/70-20, agricultural tread Standard equipment: Njdpfx Aksyv S Ufomjdc Power brake Hydraulic oil cooler Rear plate for mounting a trailer hitch Radio preparation Work lights on cabin (2 front, 2 rear) V2001 preparation for additional function at boom head 2 hydraulic connections at boom head Load guard on attachment carrier Road lighting Automatic battery disconnect switch Electrical connection cable inside boom Audible reverse warning Lift cylinder support for safety 1 Operating manual 1 Engine manual Special equipment: EU approval as tractor/towing vehicle 40 km/h incl. height-adjustable, self-locking trailer hitch, 30/32 mm pins, trailer lighting connection Air conditioning LED work lights on cabin (2 front, 2 rear) Boom suspension (B.S.S.) Location: 54595 Prüm

Condition: used, machine/vehicle number: 3641, Year of construction: 2017, operating hours: 2,809 h, load capacity: 3,800 kg, lifting height: 16,000 mm, overall weight: 12,100 kg, Hubhöhe: 16,0 m Tragkraft: 3.800 kg Gesamtgewicht: 12.100 kg Ausladung ca. 13 m Einzelkabine mit 1 Sitz Antrieb über 4 Zylinder Kubota Dieselmotor Teleskop- Stahlbauweise Reifengröße 405/70-R20, Profil 15-20 mm, Radstand 2750 mm, Radformel 4x4x4 Gesamtmaße (L x B x H) 6250 x 2300 x 3000 mm Ndodpfx Akszuk Urjmjc Hydraulische 4- Punkt Abstützung 4700 x 3900 mm Funkfernsteuerung Nähere Daten und weitere Bilder erhalten Sie gerne auf Anfrage. Diese Beschreibung stellt kein verbindliches Angebot dar und kann Fehler beinhalten, keine Gewähr auf alle Angaben

Condition: used, Year of construction: 2024, operating hours: 193 h, maximum speed: 40 km/h, Operating hours: 193, First registration: 15.01.2025 Basic equipment / technical data - Max. lifting capacity: 4,200 kg - Max. lifting height: 7,000 mm - Max. outreach: 3,800 mm - Length to attachment plate: 4,730 mm - Width: 2,310 mm - Height: 2,530 mm / 2,590 mm (with CS activated) - Total weight with forks: 8,170 kg - Total weight without forks: 8,000 kg Engine - Deutz TCD 3.6, 4-cylinder, 3.6 liters displacement, water-cooled - Power: 105 kW (143 HP) - 2,300 rpm - Hydraulic reversing fan - Stage V - Diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR) - Hydrostatic drive pump: electronically controlled with variable displacement - Motor: variable displacement - EPD TOP including optional automatic rpm increase - Mineral hydraulic oil HVI 46 Transmission - 2 gears, electrohydraulic control - Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h Cabin - Enclosed cab - Split door - 360-degree all-around visibility - GRAMMER V3611 air-suspended seat with lap belt - ROPS/FOPS certified - Heater - Front, roof, and rear wipers - Sunblind - 4x1 joystick electronic with capacitive release incl. direction selector - CS = hydropneumatic suspension for cab vibration damping Telescopic Boom - 2-piece, with electronic end-position damping (Soft Stop) Attachment carrier - Quick change system type "ZM2", hydraulically controlled from the cabin Steering - Hydraulic steering - 3 steering modes: all-wheel, front-wheel, crab steering Drive - Permanent all-wheel drive Axles - Front axle rigid, rear axle oscillating Braking System - Power-assisted disc brakes on all four drive wheels - Automatically applied parking brake when engine is off Chassis - High-strength steel frame construction Hydraulic System - Load Sensing variable displacement pump - Hydraulic work circuit: 150 l/min Njdpfxjuycgfe Akmedc - Hydraulic fan circuit: 46 l/min - Total: 196 l/min - Working pressure: 250 bar - Flow-sharing control block Electrics - 12 V - 100 Ah battery - 120 A alternator Stability Control - Simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual alarm, attachment recognition, and overload shutdown Tyres - 460/70 R 24 Michelin XMCL Standard Equipment - Servo brake - Hydraulic oil cooler - Rear plate for towing hitch mounting - Hydraulic reversing fan - Radio pre-installation - Work lights on cabin (2 front, 2 rear) - Preparation for auxiliary function at boom head - 2 hydraulic connections at boom head - Attach. protection guard on carrier - Road travel lighting - Automatic battery main switch - Electric cable inside boom - Acoustic signal when reversing - Hoist cylinder support for securing Optional Equipment - EU road approval as tractor/tow vehicle 40 km/h incl. self-locking hitch, 30/32 mm pin, trailer lighting socket - Air conditioning - Boom vibration damping (B.S.S.) - LED work lights on cab (2 front, 2 rear) - 2 work lights on the first boom section (base boom) - AS

Condition: used, power: 85 kW (115.57 HP), Year of construction: 2022, operating hours: 2,393 h, Operating hours: 2393, First registration: 24.05.2022_____Price: 59,000.00 Euro netYear of manufacture: 2022Operating hours approx. 2200Max. lifting capacity: 3,300 kgMax. lifting height: 6,600 mmMax. reach: 3,500 mmLength to equipment carrier: 4,310 mmWidth: 2,100 mmHeight: 2,120 mmTotal weight with load forks: 6,500 kgTotal weight without load forks: 6,330 kgEngine: 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooledPower: 85 kW (115 hp)2,300 rpmStage VDiesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection(DPF + DOC + SCR)Hydrostatic drivePump: electronically controlled with variable flow rateEngine: variable displacement motorEPD TOP incl. with optional automatic increase in engine speedMineral hydraulic oil HVI 46Transmission2 gearsElectro-hydraulically controlledVmax = 1st gear / 2nd gear = 16 / 20 km/h, optionally 40 km/hCabinClosed cabinSplit door360-degree all-round visibilityGRAMMER air-suspended seat with safety lap beltROPS/FOPS certifiedHeatingFront, roof and rear window wipersSun visor4x1 joystick, electronic, with capacitive release incl. direction of travel switchTelescopic boom2-part with electronic end-of-stroke damping Soft StopEquipment carrierQuick-change systemType "ZM2", hydraulically controlled from the cabinSteeringHydraulic steering3 steering modes:All-wheel drive, front-wheel drive, crab steeringDrivePermanent all-wheel driveAxlesFront axle fixedRear axle oscillatingBraking systemServo-assisted disc brakes on all four drive axles, automatically actingParking brake when engine is stoppedHydraulic systemPump with variable flow rate, type "LOAD SENSING"Flow rate working hydraulics: 125 l/minFlow rate hydraulic fan: 46 l/minTotal flow rate: 171 l/minWorking pressure: 210 barFlow-sharing control blockElectrical system12 VBattery with 100 AhAlternator 120AStabilization controlSimplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement recognition and overload shut-downSpecial equipmentTires 400/70-24 158A8Rear hydraulic connection with separate controlEU approval as a tractor/agricultural tractor40 km/hTrailer coupling, height-adjustable, self-locking, 30/32 mm pin, incl. connection for trailer lightsAir conditioningVibration damping on the boom (B.S.S.)LED rotating beacon on cabin roof (approval is the customer's responsibility!)LED work lights on the cabin (2 front, 2 rear) instead of the standard halogen headlights2 work lights at the end of the first arm (basic arm)ASCS upgrade: screen with all ASCS functions + continuous flow in the frontLocation: 54595 Prüm Njdpsupq Tqjfx Akmsdc

Condition: used, power: 105 kW (142.76 HP), Year of construction: 2022, operating hours: 1,354 h, maximum speed: 40 km/h, Operating hours: 1354, First registration: 10/11/2022. Basic equipment / technical data: max. load capacity 4,200 kg, max. lifting height 7,000 mm, max. outreach 3,800 mm, length to carriage 4,730 mm, width 2,310 mm, height 2,530 mm / 2,590 mm (CS activated), total weight with forks 8,170 kg, total weight without forks 8,000 kg, engine 4-cylinder Deutz TCD 3.6, 3.6 l displacement, water-cooled, power: 105 kW (143 hp) at 2,300 rpm, hydraulic reversing fan, Stage V, diesel particulate filter, oxidation catalyst and SCR catalyst with AdBlue injection (DPF + DOC + SCR), hydrostatic drive, pump: electronically controlled with variable flow rate, motor: swashplate motor, EPD TOP including optional automatic speed increase, mineral hydraulic oil HVI 46, transmission 2 gears, electro-hydraulically controlled, Vmax = 1st gear / 2nd gear = 16 / 20 km/h, optional 40 km/h, cab: enclosed cab, split door, 360-degree all-round visibility, V3611 GRAMMER air-suspended seat with safety lap belt, ROPS/FOPS tested, heater, front, roof and rear window wipers, sun visor, 4x1 joystick electronic with capacitive activation including direction switch, CS = hydropneumatic vibration damping of the cab, telescopic boom 2-part with electronic end damping "Soft Stop", carriage quick-change system type "ZM2" hydraulically controlled from the cab, steering: hydraulic steering, 3 steering modes: all-wheel drive, front-wheel drive, crab steering, drive: permanent all-wheel drive, axles: front axle fixed, rear axle oscillating, braking system: servo-assisted disc brakes on all four drive axles, automatic parking brake when engine is stopped, frame construction: in high-strength steel, hydraulic system: pump with variable flow rate of type "LOAD SENSING", flow rate working hydraulics: 150 l/min, flow rate hydraulic fan: 46 l/min, total flow rate: 196 l/min, working pressure: 250 bar, flow-sharing control block, electrical system: 12 V, battery with 100 Ah, alternator 120 A, stability control: simplified Merlo ASCS system (ASCS-light) with full electronic stability control, audiovisual signal, implement recognition and overload cut-off, tires: 460/70 R 24 Michelin XMCL, standard equipment: servo brake, hydraulic oil cooler, rear plate for mounting a trailer hitch, hydraulic reversing fan, radio preparation, work lights on the cab (2 front, 2 rear), preparation for additional function at the boom head, 2 hydraulic connections at the boom head, load protection grille on the carriage, lighting for road travel, automatic battery master switch, electrical connection cable in the boom, acoustic signal when reversing, lifting cylinder support for securing, optional equipment: EU approval as a tractor / agricultural tractor 40 km/h including trailer hitch, self-locking, 30/32 mm pin, including connection for trailer lighting, height-adjustable version recommended for compact and medium, air conditioning, vibration damping on the boom (B.S.S.), LED rotating beacon on the cab roof (approval is the responsibility of the customer). Ndjdpfx Ajtu Sztekmec

Condition: good (used), machine/vehicle number: 53960854045014, Year of construction: 2020, operating hours: 1,817 h, load capacity: 4,950 kg, lifting height: 25,900 mm, fuel type: diesel, mast type: other, overall weight: 16,600 kg, Der Merlo R 50.26S ist ein leistungsstarker, drehbarer Teleskopstapler, der für vielseitige Einsätze in Bau, Logistik und Industrie konzipiert wurde. Mit einer beeindruckenden maximalen Hubhöhe von 26 Metern, einer seitlichen Reichweite von 22,9 Metern... Ndsdpozqbz Ijfx Akmoc Der Merlo R 50.26S ist ein leistungsstarker, drehbarer Teleskopstapler, der für vielseitige Einsätze in Bau, Logistik und Industrie konzipiert wurde. Mit einer beeindruckenden maximalen Hubhöhe von 26 Metern, einer seitlichen Reichweite von 22,9 Metern...

Condition: excellent (used), power: 55 kW (74.78 HP), color: other, lifting height: 13,000 mm, General information Year of construction: 2016 Operating hours: 2.484 Technical information Engine type: Deutz TD 2.9 L4 Empty weight: 8.650 kg Dimensions (LxBxH): 540 x 222 x 240 cm Functional Ndedoy Rfwcjpfx Akmoc Lifting capacity: 3.800 kg Maximum reach: 860 cm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Pallet forks - Support legs - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IIIB / Tier IV interim pallet forks, hydraulic quick coupler, CE certificate

Condition: good (used), machine/vehicle number: 51617486799190, Year of construction: 2020, operating hours: 2,814 h, load capacity: 4,950 kg, lifting height: 20,800 mm, fuel type: diesel, mast type: other, overall weight: 15,800 kg, Der Merlo R 50.21 S Teleskopstapler ist eine leistungsstarke Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 20,80 Metern und einer maximalen Traglast von 4.950 kg bewältigt er auch schwere Lasten problemlos. Bei maximale... Nsdpfxjzqby Ds Akmsdc Der Merlo R 50.21 S Teleskopstapler ist eine leistungsstarke Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 20,80 Metern und einer maximalen Traglast von 4.950 kg bewältigt er auch schwere Lasten problemlos. Bei maximale...

Condition: used, power: 100 kW (135.96 HP), Year of construction: 2023, operating hours: 219 h, maximum speed: 40 km/h, Operating hours: 219, First registration: 16.01.2024 _____ Max. load capacity: 4,200 kg Max. lift height: 7,000 mm Max. outreach: 3,800 mm Length to attachment carrier: 4,730 mm Width: 2,310 mm Height: 2,530 mm / 2,590 mm (with CS activated) Total weight with forks: 8,170 kg Total weight without forks: 8,000 kg Engine: 4-cylinder Perkins 904J 3.6 l displacement, water-cooled Output: 100 kW (136 HP) 2,300 rpm Hydraulic reversing fan Emission Stage V Diesel particulate filter, oxidation catalyst, and SCR catalyst with AdBlue injection (DPF + DOC + SCR) Hydrostatic drive Pump: electronically controlled with variable output Motor: variable displacement EPD PLUS incl., with optional automatic rpm increase Mineral-based hydraulic oil HVI 46 Transmission: 2 speeds, electrohydraulically controlled Vmax = 1st / 2nd gear = 16 / 20 km/h, optional 40 km/h Cab: closed cab, split door, 360-degree all-round visibility GRAMMER air-suspended seat with safety lap belt ROPS/FOPS certified Heating Front, roof, and rear wipers Sunblind 4x1 electronic joystick with capacitive enable incl. direction selector switch CS = hydropneumatic cab suspension Telescopic boom: 2-section with electronic end-position dampening (Soft Stop) Quick-attach device carrier Type "ZM2" hydraulically controlled from cab Steering: hydraulic steering, 3 steering modes: all-wheel, front-wheel, crab steer Permanent all-wheel drive Axles: fixed front axle, oscillating rear axle Brake system: servo-assisted disc brakes on all four drive shafts, automatic parking brake when engine is off Frame: high-strength steel design Hydraulic system: variable displacement pump "LOAD SENSING" Working hydraulics flow: 151 l/min Hydraulic fan flow: 46 l/min Total flow rate: 197 l/min Working pressure: 250 bar Flow-sharing control block Electrics: 12 V, 100 Ah battery, 120 A alternator Stabilization control: simplified Merlo ASCS system (ASCS-light) with fully electronic stability control, audiovisual signal, implement detection, and overload shutoff Tires: 460/70 R 24 Standard equipment: servo brake, hydraulic oil cooler, rear mounting plate for tow bar, hydraulic reversing fan, radio prep, work lights on cab (2 front, 2 rear), preinstalled function for auxiliary hydraulics at boom head, 2 hydraulic connections at boom head, load protection guard on attachment carrier, road lighting, automatic main battery disconnect, electrical cable in boom, acoustic reverse signal, lift cylinder support for safety Special equipment: EU homologation as tractor/ towing vehicle 40 km/h incl. self-locking trailer coupling, 30/32 mm pin, incl. trailer lighting connector Air conditioning Boom suspension (B.S.S.) LED work lights on cab (2 front, 2 rear) 2 work lights at the end of the first boom section (base boom) ASCS upgrade: monitor with all ASCS functions + thumb... Ndedpopcht Hsfx Akmsc

Condition: excellent (used), fuel type: diesel, color: other, lifting height: 15,700 mm, General information Year of construction: 2018 Operating hours: 2.300 Technical information Make of engine: Kubota Empty weight: 12.100 kg Dimensions (LxBxH): 624 x 224 x 285 cm Functional Lifting capacity: 3.800 kg Maximum reach: 1.300 cm Quick coupler system: Yes CE mark: yes Condition Ndodpjz Hz Uqjfx Akmoc Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Blower - Hydraulic quick coupler - Pallet forks - Radio remote control - Support legs - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IV / Tier IV final General Country of production: Italie Radio remote control, hydraulic quick coupler, hydro-pneumatic axle suspension, CE + German documents

Condition: good (used), machine/vehicle number: 55950277345622, Year of construction: 2024, operating hours: 248 h, load capacity: 3,500 kg, lifting height: 11,000 mm, fuel type: diesel, mast type: other, overall weight: 9,100 kg, Der TST 110-35 Telestapler ist auf Reichweite und Flexibilität ausgelegt – überall dort, wo Lasten nicht nur gehoben, sondern gezielt nach vorne oder über Hindernisse hinweg bewegt werden müssen.. Mit einer Hubhöhe von 11 Metern und einer maximalen Tra... Nodj Adxcaepfx Akmsdc Der TST 110-35 Telestapler ist auf Reichweite und Flexibilität ausgelegt – überall dort, wo Lasten nicht nur gehoben, sondern gezielt nach vorne oder über Hindernisse hinweg bewegt werden müssen.. Mit einer Hubhöhe von 11 Metern und einer maximalen Tra...

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, lifting height: 13,000 mm, mast type: triplex, General information Year of construction: 2016 Operating hours: 2.484 Technical information Number of cylinders: 4 Engine capacity: 2.900 cc Engine type: Deutz TD 2.9 L4 Empty weight: 8.650 kg Dimensions (LxBxH): 540 x 222 x 240 cm Nedszg Agkepfx Akmedc Functional Lifting capacity: 3.800 kg Maximum reach: 860 cm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Hydraulic quick coupler - Pallet forks - Support legs - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IIIB / Tier IV interim General Country of production: Italie Pallet forks, hydraulic quick coupler, CE and complete (German) documentation present

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, lifting height: 13,000 mm, mast type: triplex, General information Year of construction: 2017 Operating hours: 2.111 Technical information Number of cylinders: 4 Engine capacity: 2.900 cc Engine type: Deutz TD 2.9 L4 Empty weight: 8.650 kg Dimensions (LxBxH): 540 x 222 x 240 cm Functional Lifting capacity: 3.800 kg Maximum reach: 860 cm Quick coupler system: Yes CE mark: yes Ndjdpozg Ad Nofx Akmjc Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Hydraulic quick coupler - Pallet forks - Support legs - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IIIB / Tier IV interim General Country of production: Italie Pallet forks, hydraulic quick coupler, CE and complete (German) documentation present

Condition: excellent (used), power: 55 kW (74.78 HP), fuel type: diesel, color: other, lifting height: 13,000 mm, General information Year of construction: 2016 Operating hours: 2.751 Technical information Number of cylinders: 4 Engine capacity: 2.900 cc Engine type: Deutz TD 2.9 L4 Empty weight: 8.650 kg Dimensions (LxBxH): 540 x 222 x 240 cm Functional Ndjdpfx Akozg Aftemjc Lifting capacity: 3.800 kg Maximum reach: 860 cm Quick coupler system: Yes CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Hydraulic quick coupler - Pallet forks - Support legs - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IIIB / Tier IV interim General Country of production: Italie Pallet forks, hydraulic quick coupler, CE and complete (German) documentation present

Condition: good (used), machine/vehicle number: 54444183912790, Year of construction: 2021, operating hours: 1,155 h, load capacity: 3,300 kg, lifting height: 6,600 mm, fuel type: diesel, mast type: other, overall weight: 6,330 kg, enginetype: Diesel, manufacturer: Merlo Ndsdozp Ud Tepfx Akmjc

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: C9000052, Year of construction: 2019, operating hours: 1,483 h, lifting height: 13,800 mm, fuel type: diesel, fork length: 1,200 mm, Equipment: UVV, documentation/manual, The current UVV inspection report is attached! The UVV certification is valid until 10/2027! Maintenance and servicing have always been carried out according to the manufacturer's intervals. TECHNICAL DETAILS Load capacity: 3.8 t Lifting height: 13,800 mm Fork length: 1,200 mm MACHINE DETAILS Drive: Diesel Tire condition Condition of front right tire: Approx. 80% Condition of front left tire: Approx. 80% Condition of rear right tire: Approx. 80% Condition of rear left tire: Approx. 80% Operating hours: 1,483 h EQUIPMENT UVV inspection valid until 10/2027 Fork carriage Seat cover Spare key Documents Side shift Supports Leveling system Nodpfjzzxv Djx Akmedc

Condition: good (used), machine/vehicle number: 54444360139094, Year of construction: 2022, operating hours: 783 h, load capacity: 12,000 kg, lifting height: 9,800 mm, fuel type: diesel, mast type: other, overall weight: 15,200 kg, enginetype: Diesel, manufacturer: Merlo Ndsdpezp Ufksfx Akmjc

Condition: excellent (used), power: 74 kW (100.61 HP), fuel type: diesel, color: other, lifting height: 9,550 mm, mast type: duplex, General information Year of construction: 2014 Operating hours: 7.731 Technical information Number of cylinders: 4 Engine capacity: 4.400 cc Engine type: Perkins 1104D-44T Empty weight: 11.000 kg Dimensions (LxBxH): 535 x 224 x 244 cm Functional Lifting capacity: 7.200 kg Maximum reach: 550 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - Beacon(s) - Blower - Central lubrication - Hydraulic quick coupler - Pallet forks Njdpfx Ajzzn Ngjkmjdc - Work lamp(s) = Remarks = Drivetrain Stage / Tier: Stage IIIA / Tier III General Country of production: Italie New tires, Hydraulic quick coupler, German documents + CE present, Central lubrication

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: ZF1RT2101C4131380, Year of construction: 2014, operating hours: 11,800 h, load capacity: 4,000 kg, lifting height: 26,000 mm, empty load weight: 16,050 kg, arm reach: 22,900 mm, The telescopic handler underwent maintenance three months ago. During this service, the slew ring bolts were replaced among other tasks, and both the engine and hydraulic oils were serviced. TECHNICAL DATA Max. lifting capacity: 4,000 kg Max. lifting height: 26 m Max. forward reach: 22.9 m Lifting height at max. capacity: 13.6 m Reach at max. capacity: 8.2 m Capacity at max. lifting height: 1,500 kg Capacity at max. reach: 150 kg Slew tower rotation: continuous MACHINE DETAILS Operating weight with forks: 16,050 kg Engine Manufacturer / Cylinders: Iveco / 6 Engine output: 107 kW / 145 hp Fuel tank capacity: 150 l Performance Speed in 1st gear: 16 km/h Speed in 2nd gear: 40 km/h Hydraulic system Load-sensing hydraulic system: 240–108 bar·l/min Hydraulic oil capacity: 160 l Electrical system On-board voltage: 12 V Battery capacity: 160 Ah Drive and steering Transmission: hydrostatic Hydrostatic oil volume: 12 l Drive: permanent all-wheel drive Steering: four-wheel steering Operating hours: 11,800 h EQUIPMENT Hydraulically controlled stabilizers Hydropneumatic suspension Tiltable cab with FOPS certification Electronic joystick control Merlin control system Tac-Lock tool carrier Auxiliary hydraulics for boom Two floating forks (1,200 mm) Permanent all-wheel drive Four-wheel steering Disc brakes on all wheels Automatic parking brake Finger-touch directional control Hydrostatic transmission Air suspension seat Note: The winch (€4,000) and work platform (€1,000) can be purchased separately if required. Ndjdpjx Dmgvofx Akmoc A translated version of the maintenance report is attached as a document.

Condition: good (used), machine/vehicle number: 53935954002262, Year of construction: 2020, load capacity: 4,000 kg, lifting height: 15,700 mm, fuel type: diesel, mast type: other, overall weight: 12,900 kg, Unser Merlo R 40.16S Teleskopstapler ist eine leistungsstarke Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 15,70 Metern und einer maximalen Traglast von 4.000 kg bewältigt er auch schwere Lasten problemlos. Bei maximal... Ndsdpfxozqbzze Akmjc Unser Merlo R 40.16S Teleskopstapler ist eine leistungsstarke Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 15,70 Metern und einer maximalen Traglast von 4.000 kg bewältigt er auch schwere Lasten problemlos. Bei maximal...

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 400 h, load capacity: 4,500 kg, lifting height: 10,600 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 10,300 kg, total length: 5,040 mm, drive type: Diesel, construction width: 2,350 mm, Rigid telescopic forklift Mast type: Telescopic Technical condition: New Front tires size: 500/70 r 24 michelin xcml Rear tires size: 500/70 r 24 michelin xcml Ndedpoxfm Nyjfx Akmec

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 51 h, load capacity: 3,000 kg, lifting height: 6,700 mm, fuel type: diesel, mast type: telescopic, construction height: 2,120 mm, empty load weight: 6,450 kg, total length: 4,510 mm, drive type: Diesel, construction width: 2,000 mm, Rigid telehandler Mast type: Telescopic Technical condition: New Front tires: 400/70-20, field tread pattern Rear tires: 400/70-20, field tread pattern Nedpfx Aew Ir Ihjkmsdc

Condition: good (used), machine/vehicle number: 54444267340118, Year of construction: 2021, operating hours: 1,797 h, load capacity: 3,300 kg, lifting height: 6,600 mm, fuel type: diesel, mast type: other, overall weight: 6,330 kg, enginetype: Diesel, manufacturer: Merlo Nedpfxszp Ufdo Akmjdc

Condition: good (used), machine/vehicle number: 49045682553174, Year of construction: 2019, operating hours: 1,703 h, load capacity: 4,000 kg, lifting height: 17,600 mm, fuel type: diesel, mast type: other, overall weight: 13,600 kg, Unser Merlo R 40.18S Rotostapler ist eine leistungsstarke Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 17,60 Metern und einer maximalen Traglast von 4.000 kg bewältigt er auch schwere Lasten problemlos. Bei maximaler R... Nsdezqb Dpopfx Akmsdc Unser Merlo R 40.18S Rotostapler ist eine leistungsstarke Maschine für anspruchsvolle Hebe- und Transportaufgaben. Mit einer Hubhöhe von 17,60 Metern und einer maximalen Traglast von 4.000 kg bewältigt er auch schwere Lasten problemlos. Bei maximaler R...

Condition: used, functionality: fully functional, Year of construction: 2026, operating hours: 3 h, load capacity: 4,200 kg, lifting height: 7,000 mm, fuel type: diesel, mast type: telescopic, construction height: 2,530 mm, empty load weight: 8,000 kg, total length: 4,730 mm, drive type: Diesel, construction width: 2,310 mm, Telescopic forklift rigid Mast type: Telescopic Ndsdsznfqnspfx Akmjc Technical condition: New Front tires size: 460/70 r 24 michelin xcml Rear tires size: 460/70 r 24 michelin xcml