Used Rotating Harrows for sale (7,918)

Year of construction: 2023, operating hours: 200 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Bjdszxxifjpfx Abtjwt Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM 14x6/2S/2WX1M with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotary tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the outer surface of parts placed on a rotary table. The machine is equipped with two rotary tables. Rotary table diameter: 1400 mm Maximum product height: 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours: 5275 Commissioning date: March 31, 2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Blast wheel, number and type: 2 WX1M Outer diameter of the blast wheel: 330 mm Blast wheel speed: 2900 rpm Amount of abrasive material discharged per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotary table diameter: 1400 mm Rotary table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance of the spindle axis from the clamping surface of the table: 60-560 mm Bwjdjzwqyyopfx Abtst Maximum workpiece weight: 1500 kg

Condition: used, Year of construction: 2023, functionality: fully functional, empty load weight: 305 kg, load capacity: 2,500 kg, Rotary table Load center of gravity: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Technical condition: New Bedpfx Abszxv Dtstewt

Condition: ready for operation (used), Year of construction: 2013, operating hours: 29,764 h, functionality: fully functional, machine/vehicle number: 6640-105136, load capacity: 235 kg, arm reach: 2,550 mm, controller model: IRC5, repeat accuracy: 0.05 mm, number of axes: 6, TECHNICAL DETAILS Bwjdpfx Abezxqcwstst Load capacity: 235 kg Reach: 2,550 mm Repeatability: ±0.05 mm Axis 1: +170° to -170° Axis 1 optional range of motion: +220° to -220° Axis 2: +85° to -65° Axis 3: +70° to -180° Axis 4: +300° to -300° Axis 5: +120° to -120° Axis 6: +360° to -360° Axis 6 standard rotation range: ±96 revolutions MACHINE DETAILS Controller: IRC5 Operating hours: 29,764 h EQUIPMENT Manipulator IRC5 controller cabinet All cable sets Teach pendant

Condition: used, Year of construction: 2014, Cascade 70G-CFR Rotator (2014) Bodpfx Aszwvhvsbtswt Reliable rotator from Cascade, manufactured in 2014. Inspected by our own workshop and ready for immediate use. Why choose this unit? FEM 3 mounting — fits directly onto the corresponding fork carriage Opening range: 560-1800 mm Fork dimensions: 1200 x 150 x 60 mm Own weight: 1084 kg Chassis number: VER927113-1 Supplied after a complete inspection Available for immediate delivery from 2Bro Trading in Mol. Delivery throughout the Benelux region is possible. Supplied with a new inspection certificate – complete pre-delivery service.

Condition: used, Year of construction: 2013, Operating hours: approx. 1550h, displacement: 6728cm³, power: 107kW, total weight: 16.5t. Including winch, work platform, high-pressure hose with reel, forks and lattice boom extension. A new rotary union is available as a spare part. An on-site inspection is possible. Bedozx Eg Repfx Abtswt

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Bodpfozv Rc Sox Abtowt Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: used, Rotating Boring Table Travel X: 2000 mm Table size: Length 1240 mm x Width 1250 mm Bench width: 1030 mm Diameter of the ball screw: Ø 70 mm 2 motors INDRAMAT: 1 travel X motor + 1 table rotation motor Supplied without electrical panel (electrical cabinet to be redone) Protector hennig in average condition Ideal part for retrofitting Total bench length: 5200 mm Width: 1900 mm Height: 900 mm Weight: approx 7 T Bwjdpfx Ajzwuu Iebtot

Condition: used, Year of construction: 2026, functionality: fully functional, empty load weight: 240 kg, load capacity: 2,500 kg, Rotary device ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Bodpfozwyf Ejx Abtswt Technical condition: very good Description: Good working condition, ready for use, as returned by the previous owner.

Year of construction: 2018, operating hours: 3,758 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 5156, GMM rotating head bridge saw with vacuum separator Support travel distance: 3600 mm Support height adjustment: 700 mm Extension of bridge rails Y-axis to 5400 mm Maximum blade diameter: 825 mm for cutting depth approx. 300 mm Saw motor power: 23.5 kW Stepless speed control: 800 - 6000 rpm Tilting table with hydraulic tilt: 3500 mm x 2000 mm Bjdey Iu Raopfx Abtjwt Table extension: 3500 mm x 430 mm Saw table with rubber table covering Removable table stops Vacuum lifter for automatic separation of workpieces Camera Automatic material measurement Automatic tool measurement Central lubrication Air conditioning GMM software including: - Milling - Drilling - Profiles - MiniCad - Cuts from CAD - Parametric shapes

Condition: used, Year of construction: 2021, useful stroke 1.700 mm workpiece weight 2,20 t rotation +/- 190 ° stroke speed 1,00 / 0,50 m/min Rotating speeds 0,50 U/min Bjdpjwzmnkefx Abtewt component measurement max. 6.000 x 2.550 x 1.400 mm Control SIEMENS HMI total power requirement 8,00 kW weight of the machine ca. 8,00 t dimensions of the machine ca. 6,00 x 4,00 x H4,00 m HYWEMA lifting and turning device. The product is used as a work aid to lift loads for ergonomically favorable assembly- or welding work.

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Bedpezwxz Ejfx Abtswt Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: ready for operation (used), Year of construction: 2023, machine/vehicle number: 231458, functionality: fully functional, travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 370 mm, spindle speed (max.): 6,000 rpm, table load: 800 kg, Note: The auction end date has been postponed to September 16, 2026! TECHNICAL DETAILS Travel range, X-axis: 3,700 mm Travel range, Y-axis: 2,100 mm Travel range, Z-axis: 370 mm Rotation range, C-axis: 0–362° Swivel range, A-axis: 0–90° Travel time, C-axis (0–392°): 3 s Travel time, A-axis (0–90°): 2 s Spindle speed, electric spindle: 6,000 rpm Power, electric spindle: 16.5/56 kW Speed, X-axis: 30 m/min Speed, Y-axis: 30 m/min Speed, Z-axis: 5 m/min Dimensions, tilting table: 3,500 × 2,000 + 500 mm Load capacity: 800 kg MACHINE DETAILS Stainless steel cover for saw blade with opening for cutter: Ø 425 mm Stainless steel cover for saw blade: Ø 625 mm Total power consumption: 23 kW Water consumption for saw blade: 30 L/min Total weight: 4,800 kg Bwjdszuyryepfx Abtst EQUIPMENT Material and saw blade measuring system Vacuum system for moving the panels Camera with software for management Pneumatic tilting table Motorized rotary head (C-axis) Motorized saw blade tilt (A-axis) Stainless steel cover for saw blade with opening for cutter Stainless steel cover for saw blade

Condition: used, Year of construction: 2001, functionality: fully functional, load capacity: 2,500 kg, Rotating device ISO class: ISO class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Bedpszl Irvefx Abtewt Technical condition: good Description: Year 2001, ISO 2A (41 cm), Capacity 2500 kg, Rotator 360°, Width 810 mm, ID OS2050.

Condition: used, Max. load capacity: 30t/set, min. workpiece diameter at 90°: 466mm, max. workpiece diameter at 30°: 11457mm, roller dimensions: 520mm×355mm, roller covering: rubber, max. speed: 1295mm/min, motor power: 2×1.5kW, weight drive unit/idler unit: 1300kg/700kg. Documentation available. An on-site inspection is possible. Bsdpfx Abezxr Rietewt

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, machine/vehicle number: 395.900.219.1159, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, total height: 2,700 mm, table length: 800 mm, overall weight: 4,150 kg, GF AgieCharmilles FORM E 600 – Die-Sinking EDM Year of manufacture: 2019 Operating hours: approx. 900 h Bjdpfx Abozyn E Estswt The machine is in excellent, fully functional condition. It has been used only for a very limited number of test and trial operations and has never been used for continuous serial production. Technical specifications: X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Table size: 800 x 600 mm Maximum workpiece size: 1,000 x 700 x 400 mm Maximum workpiece weight: 1,000 kg Positioning resolution: 0.1 μm Best surface finish: Ra 0.2 μm Generator current: 140 A Dielectric tank capacity: 650 l Integrated C-axis Maximum electrode weight on C-axis: 25 kg Maximum C-axis rotation speed: 80 rpm AC FORM HMI with 19" touchscreen ISPG (Intelligent Speed Power Generator) Glass scales on X/Y axes EROWA ITS-50 automatic chuck Electrode changer Fire protection system 6 integrated filter cartridges Power supply: 3 x 400 V, 50/60 Hz Compressed air: 6–8 bar LAN connection: 10/100 Mbit/s Machine dimensions / weight: Machine height: 2,700 mm Machine weight: approx. 4,150 kg The machine is currently located at our facility in Kocaeli, Turkey and is available for inspection. Additional photos, videos, and further information are available upon request.

Condition: used, Year of construction: 2021, This is the main drive of a Power+Free conveyor system CSF, the machine is still unused in its original packaging. Assembly: PFC47-N, longitudinal dimension of upper section: 1,440mm, end distance left: 55mm, end distance right: 55mm, vertical dimension to drive/guide level: 313mm, additional vertical dimension: 213mm, vertical dimension below the centerline: 160mm, distance between the shown guide/suspension points: 420mm, additional vertical dimension in front view: 160mm, overall dimension in plan view: 1,500mm, internal/usable length in plan view: 1,400mm, edge distance left/right: 25/25mm, distance between two drive/running gear points: 240mm, lateral partial dimension: 240mm, suspension hole diameter: 14mm, total length of substructure, side view: 1,640mm, overall width: 820mm, with documentation. An on-site inspection is possible, machine not powered. Bwsdpszvghdsfx Abtst

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 1,200 h, load capacity: 6,000 kg, lifting height: 26,000 mm, fuel type: diesel, mast type: telescopic, construction height: 3,100 mm, power: 115 kW (156.36 HP), fork length: 1,200 mm, empty load weight: 18,000 kg, total length: 8,080 mm, drive type: Diesel, construction width: 2,500 mm, Rotating Telescopic Handler Mast type: Telescopic Transmission: Hydrostatic Bwjdszxu Hmspfx Abtjt Speed class: 20 Condition: As new Technical condition: Very good Front tires type: Pneumatic Front tires size: 18-22 Front tires condition: 80-100% Rear tires type: Pneumatic Rear tires size: 18-22 Rear tires condition: 80-100% Description: Thanks to its 3-in-1 design (telehandler, crane, and work platform), the MRT 2660 is a highly versatile tool for your material handling needs. The MRT 2660 can lift up to 6 tonnes, and its pentagonal boom profile along with exceptional 360° visibility ensures precise control over your loads. With 360° rotation, you can perform various tasks without repositioning the machine. It can be used on wheels or stabilizers, which provide an increased footprint for safe operation. The MRT 2660 is intelligent, ergonomic, and comfortable, making it ideal for construction and industrial applications. It is a powerful and precise tool you won’t want to be without! A variety of attachments such as man basket, winch, or bucket are available for this telehandler. 3rd hydraulic valve, heater, full cab, air conditioning,

Condition: used, machine/vehicle number: 0380, Year of construction: 2014, operating hours: 4,600 h, load capacity: 4,500 kg, lifting height: 21,000 mm, overall weight: 15,500 kg, enginetype: Diesel, manufacturer: Merlo Bwedpfx Aoztx Ecjbtet

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, overall weight: 426 kg, load capacity: 4,000 kg, DGUV certified until: 07/2027, Seith 40.55 rotating device with the following specifications: Load capacity: 4,000 kg Load center of gravity: 500 mm Mounting: FEM IIIA Overall width: 1,100 mm Year of manufacture: 2015 Own weight: 426 kg Own center of gravity: 95 mm Overhang: 210 mm Net price ex works, without fork arms (Price for fork arms upon request) Inspection and demonstration available by appointment. Sale is exclusively to commercial businesses; subject to prior sale, errors and omissions excepted. Transportation costs upon request. Bodpozhhcyofx Abtjwt Further information and offers can be found on our newly designed website.

Year of construction: 2015, condition: ready for operation (used), A welding turning device Jucat, consisting of two parts with the workpiece in the middle, is available. Design: 2-column system, max. load capacity: 6000kg, rotation torque: 800Nm, tilting torque: 7500Nm, lifting range: 800mm-2000mm, lifting speed: 40mm/s, max. rotational speed: 2rpm, clamping plate diameter: 750mm, operating pressure: 120bar. Machine dimensions X/Y/Z: approx. 2500mm/1100mm/1100mm, weight: approx. 2x1000kg. Documentation available. An on-site inspection is possible. Bwjdpeyrg H Hjfx Abtet

Condition: used, Year of construction: 2026, load capacity: 8,000 kg, lifting height: 34,900 mm, total length: 9,290 mm, Rotating forklift Magni RTH 8.35 Drive Diesel Bwodpfx Aezgltyobtst Year built 2026 Lifting height (mm) 34,900 Lifting weight (kg) 8,000

Condition: used, Year of construction: 2017, functionality: fully functional, load capacity: 5,000 kg, Rotator Load Center: 500 ISO Class: ISO Class 3 = 2,500 - 4,999 kg Bwjdpfx Asx Raalebtot Condition: Ready for operation and fully functional Technical Condition: good Description: Year 2017 ISO 3A (51 cm) Capacity 5,000 kg Rotator 360° Width 1,100 mm Round forks 1,000 mm ID OS1786

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. Bwjdowty H Dspfx Abtjt The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2003, Wedge ring roller front serrated disks (new) / Bjdpfx Aetqd Tlobtowt