Used Mesh Waving for sale (771)

Condition: good (used), The delivery includes: 01x Rear panel mesh, used Material color: yellow Overall width: approx. 2,740 mm Overall height: approx. 1,100 mm Mesh size: approx. 50 x 50 mm Frame profile dimensions: approx. 40 x 40 x 4 mm Wire thickness: approx. 3.0 mm Weight per unit: approx. 26.84 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Bcedpfx Afjxcuc Aehsu General information about the item: This item is only offered for collection. If transport or shipping of this item is required, additional costs will apply, which can be requested separately depending on the place of delivery and scope of delivery.

Condition: excellent (used), Year of construction: 2016, operating hours: 250 h, functionality: fully functional, machine/vehicle number: PN99516, total height: 860 mm, total width: 660 mm, total length: 560 mm, manhole location: front, type of input current: AC, overall weight: 93 kg, input voltage: 230 V, input frequency: 50 Hz, height adjustment type: electric, Equipment: documentation/manual, For sale: A lightly used optical shaft measuring device from Vici Vision. We are selling it as it does not meet our requirements. The device is suitable for shafts and similar parts up to Ø90x260mm, with a usable measuring range of Ø8x100mm. The original purchase price including accessories was CHF 59,595. Software update and version: MTL 8.74 (date unknown) Last calibration: 20.03.2023, certificate available for review upon request. Scope of delivery: - Vici PC (without monitor, mouse, or keyboard; for demonstration purposes only) - Manual, wiring diagram, operation and maintenance manual, technician’s manual - Center chuck with jaws 0.6–0.8 and jaws 0–6, jaws 0.2–0.4 - Lower tailstock center - 6-jaw chuck, collet holder with collets 0.3–1.5 Bsdpfxjx S Nc Se Afhjcu - Screws and 24mm/32mm open-end wrenches Technical Data: Model: MTL X10 Measuring range: Ø8 x 100mm Maximum workpiece size: Ø90 x 260mm Maximum workpiece weight: 3 kg Diameter measurement accuracy at 20°C: (2+D[mm]/100) µm Length measurement accuracy at 20°C: (5+L[mm]/100) µm Pixel size: 2 x 2 µm Diameter repeatability at 20°C: 0.2 µm Length repeatability at 20°C: 2 µm Maximum vertical travel speed: 20 mm/s Maximum rotational speed: 180°/s Device weight: 93 kg Power supply: 230V - 50/60 Hz Dimensions (LxWxH): 560 x 660 x 860 mm Recommended table size (solid steel construction or granite table) (LxWxH): 1250 x 750 x 710 mm

Condition: refurbished (used), Year of construction: 2025, working width: 2,450 mm, Refurbished Schlatter MG903 - ZG24 - Longitudinal wire insertion LFE - Longitudinal wire feed LV - MG24.4 mesh welding machine - Cross wire feeder QF8 - Mat extraction MVL4.2 - De-stacker MS12 Bcedjv Ed Anepfx Afhju Control and power cabinet - Siemens S7 TIA machine control Mesh size : 2450mm Wire: 2-12mm

Year of construction: 2005, condition: good (used), functionality: fully functional, machine/vehicle number: 05071232191, For sale is our Seho wave soldering system (without tin). Model: MWS 2340. Condition: very good and fully functional. Includes fluxer, 2 x lifters, corner transfer unit, 8.50 m conveyor section, 1 x solder pot, 2 x pump drives, 2 x solder waves. Wave type: Wörthmann 3/5. The soldering system can still be inspected in operation for a few more weeks. Only defect: small cracks on the panel in photo no. 4. Bedpsw Rl S Eofx Afhocu

Condition: used, This listing is for a Heidolph Polymax 1040 Wave Platform Shaker. Bsdpfxjxx Ah Se Afhjcu The unit is in full working condition and is ready for immediate release. Elevate your laboratory's capabilities with the Heidolph Polymax 1040 Wave Platform Shaker, a versatile and reliable solution designed for a wide range of applications, including cell culture, mixing, and incubation. This medium-sized shaker is engineered to provide optimal performance while ensuring gentle and effective agitation for your samples. Key Features: Variable Tilt Angles: Choose between a 5° tilt angle for soft, gentle movements or a 10° tilt angle for more vigorous shaking, accommodating various vessel types such as culture plates, media bottles, and Erlenmeyer flasks. Adjustable Speed Control: Easily set and adjust the speed from 2 to 50 rpm using the intuitive analog control knob, making it ideal for delicate cell culture applications. Temperature Control Compatibility: Designed to work seamlessly with a modular incubator system, the Polymax 1040 supports variable temperature control up to 65 °C, allowing for precise incubation conditions. Technical Specifications: Maximum Load Capacity: 5 kg Shaking Type: Orbital rocking shaker Analog Timer: Set for unattended operation from 1 to 120 minutes, with an acoustic alarm signaling when the time is up. Benefits: Unmatched Versatility: The Polymax 1040 can handle a variety of vessels, giving you the flexibility to conduct multiple experiments without limitations. User-Friendly Operation: The straightforward analog controls and timer make it easy to set up and monitor your experiments, ensuring reliable results every time. Robust Design: With a shipping weight of 10 kg and a durable construction, this shaker is built to withstand the demands of everyday laboratory use. Choose the Heidolph Polymax 1040 Wave Platform Shaker for a dependable, high-performance shaking solution that meets the diverse needs of your laboratory. Experience enhanced efficiency and precision in your mixing and incubation processes today!

Condition: used, This listing is for a UVP Upland long wave white light Bcodpfx Afexzh N Hjheu

Condition: used, load capacity per storage section: 500 kg, Gas grid size 880x1100 (890x1112mm) Load capacity: 500kg (also available new in 250/500/750/800/1000/1250/1500kg) Bodpfx Afsqu Rgnohocu Mesh size: 100x50mm Material: sendzimir galvanized steel wire 3.8mm Available new and used. Delivery time: Large stock (4000 units), please inquire for current lead time/availability Send a quotation request for the required wire grid size.

Condition: good (used), functionality: fully functional, Gitterbox emptying, pneumatic, for gitterboxes 1200 x 800 mm Bedpfsv Nhk Dex Afhjcu Dimensions: 2200 x 1700 x 2250 mm (LxWxH) Weight approx. 1500 kg Note: The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video above in the pictures, or on our website or our YouTube channel. Inspections, even under power, are possible at any time by arrangement. Video calls are possible on request. We are happy to answer questions about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Friday we are there for you from 8 a.m. to 1 p.m. Please note: All technical data refers to information provided by the manufacturer. We accept no liability for the information provided or any errors. The offers are non-binding, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: good (used), Steel wire sheet cutter Cutting length 3900 mm Dimensions Bcodpfxsgiplvo Afheu Length: 5100 mm Width: 1700 mm Height:3100 mm

Condition: used, A used mesh container with Euronorm dimensions of 1200 × 800 mm is a practical and well-organized storage solution for a variety of warehouse and logistics applications. Bedpfox Hug Esx Afhecu With a generous 700-liter capacity, the container offers ample space for bulk goods, parts, returns, or order picking. The container is constructed of blue-painted

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Bcjdpfx Ajwu Tu Dsfhsu Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: refurbished (used), Year of construction: 2025, JAGER welded mesh line U-Gsa-st Bjdpowu Dcxofx Afhocu Full revamped "as new" Technical data 24 pay off for longitudinal wire spools, longitudinal wire straightening equipment Line wire pull off system Longitudinal wire loop Longitudinal wire straightening equipment Cross wire magazine Number of installer line wires : 24 up to 10 mm Diameter of lines wires : 4 to 10mm Diameter of cross wires : 4 to 10mm Separation between line wires : 100, 150, 200, and 300 mm Separation between cross wires : min 30 mm , steplessly programmable Max. length of cross wire (mesh width) 2500 mm , max welding width : 2400 mm Mesh length : min 3000 mm and max . 6000 mm Trafos : 8 x 160 Kva Number of installer line wires: Number of installer line wires : 24 up to 10 mm Diameter of lines wires: 4 to 10mm Diameter of cross wires: 4 to 10mm Separation between line wires: 100, 150, 200, and 300 mm Separation between cross wires: min 30 mm , steplessly programmable Max. length of cross wire (mesh width): 2500 mm Max welding width: 2400 mm Mesh length: 3000 - 6000 mm Trafos: 8 x 160 Kva

Condition: excellent (used), Year of construction: 1999, FULLY AUTOMATIC - EVG G55/102 MESH WELDING LINE Construction year – 1999. Line is refurbished 4-5 years ago. Electrical cabinet completelly updated in software, PLC S7-405 and electrical systems in DECEMBER 2018. Line + cross wires from coils Mesh width: min. 1200mm to max. 2500mm Mesh length: min. 2000mm to max. 6000mm Separations between AT: 50mm – 1000mm stepless Separations between AL: 100mm, 150mm, and multiples Diameter AT: min. 3,8mm to max. 8mm Diameter AL: min. 3,8mm to max. 8mm Machine speed: max. 150 QD/min. Reel weight: max. 3000 kg Stack height: max. 700mm Panel weight: max. 150 kg Bcodsxvmamepfx Afhou Power rating of welding transformers at 50% intermittent duty: 960 KVA Drive power: 153kW Tension de red: 3 x 400V Network frequency: 50 Hz Dimensions (approx. mm) Machine: L x W x H Weight: G55L/102-RV 4900mm x 1800mm x 2300mm 15,000 kg T6B/102 7500mm x 2200mm x 1800mm 6,000 kg T6B/102 5200mm x 1700mm x 2200mm 4,200 kg Main Voltage: 3 x 400 V Frequency: 50 Hz Connection power: 960 kVA (50% S.I.) 192 kVA (drive force) 24 longitudinal wire straightener Longitudinal wire dragger Lars loop Longitudinal straighteners Longitudinal feed Welding head Shears Mesh extraction Turner stacker Exit table of 7m Cross feeders Cross wire drag

Condition: used, Fully collapsible used mesh container. This gitterbox is easy to fold due to its hinged walls. One long side wall and one short side wall folds away half way for easy access. Bsdpjlb Uwgsfx Afhocu The sturdy steel frame stands on four legs and can easily be picked up by a forklift or pallet truck on both sides. The wire container can be stacked

Condition: used, Used gitter box directly available at Kruizinga. nl. This high quality steel mesh container is one of the most used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackable capacity. Bjdpfxex Ahr Do Afhjcu This mesh container is ideal for small parts and very practical to use because of the 2 steel

Condition: used, Batch offer of 10 used Poolgitterbox DB according to UIC standard 435-3 Buy your used DB gitterboxes directly from Europe's largest supplier. This steel mesh container is one of the most widely used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. Bjdpfjx Ahtbex Afhjcu This mesh

Condition: used, Lot offer of 4 used pole gitterbox DB according to UIC standard 435-3 Buy your used DB gitterboxes directly from Europe's largest supplier. This steel mesh container is one of the most widely used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. This mesh Bjdpfjx Ahthox Afhjcu

Condition: used, Used Pool gitterbox DB according to UIC standard 435-3 Buy your used DB gitterboxes directly from the largest supplier in Europe. This steel mesh container is one of the most used/sold load carriers in the industry, especially in the steel industry due to its high load capacity and stackability. Bodpfx Afex Ahr Rjhocu This mesh container is

Year of construction: 2010, condition: excellent (used), Technical Details : Bcodpjfwm D Tofx Afhou - For sale Full automatic mesh welding line PITTINI / EVG - Mesh width - max. 2400 mm - Mesh length - max. 8000 mm - Dia. Longitudinal wire - max. 10 mm - Dia. Cross wire - ma. 10 mm - Max. number of longitudinal wire - 24 - Longitudinal and cross wire from spools - Cross wire feeding unit - EVG - Speed - max. 110 tacts / min. - installed power - 1,5 Mw - Automatic mesh packing unit

Condition: excellent (used), Year of construction: 1992, Manufacturer EVG Type TSD 7-25 Machine No. 958 Year of manufacture 1993 Working direction L > R Beam types KT 8… Beam height (mm) 90-250 Carrier length min. (mm) max. (mm) 14,000 Bcsdpfx Aowp Ilyjfhju Fixed lengths: Yes Cutting pitch (mm) 100/200 Spool unwinder (pcs.) 5 LAR: Yes Wire diameter - 5-12 mm smooth/ribbed Diagonal - 4-7 mm smooth / ribbed Stack height max. (mm) - 500

Year of construction: 2019, condition: new, Machine is designed for making panel welded meshes, width 2150 mm, length 6000 mm with distance between line wires 150 mm, with distance of cross wire from 25 to 300 mm and wire diameter from 4 to 8 mm. Basic parts of the machine: 1. Pay-off for line wire. Bcsdpfed N Hvqjx Afhju 2. Straitening unit. 3. Line wire pooling unit with loop. 4. Welding unit. 5. Shear. 6. Turner with panel’s stacker. 7. Energy electrical cabinet. 8. Control cabinet. Machine is new !

Condition: excellent (used), Year of construction: 2009, Technical Details : Year - 2009 Beam welding machine outlet height: 1400mm (UK beam from ground) Min. strap length: 0.8 m Max. beam length: 16.0 m Base width during production: 58 mm (inside diagonals) Finished beam width: 70 – 116 mm (external dimensions of bottom chords) Lattice girder production speed: max. 15 m/min Design of the wire feed speed: 18 m/min (upper and lower belt) 38 m/min (diagonals) Bcodern N Efepfx Afhou Carrier types that can be produced: KT KTS Top belt Ø: 5 – 16 mm 5 – 7 mm Lower belt Ø: 5 – 16 mm 5 – 7 mm Diagonal Ø: 4.5 – 9 mm 5 – 7 mm Height: 70-400mm 80-310mm Division of the diagonal: 190 – 210 mm 200 mm Primary material: Cold or hot rolled reinforcing steel from coil in accordance with EN 10080:2005 in weldable quality, max. carbon content 0.20 % The line is in excellent working condition !

Year of construction: 1990, condition: excellent (used), Technical Details : – Year – 1990/2012 – Model – 8/SR12 – Speed – max. 70 tact/min. – range of opening mesh space – 25×25 – 100×100 mm Bcjdpfsd Sfgbsx Afhou – Wire range – 1,5 – 5 mm – Number of transformers – 4 x 100 kw – Mesh width – max. 1200 m – Mesh lenght – 1000 – 3000 mm On line was made new control panel and transformers in 2012

Year of construction: 1978, condition: excellent (used), Technical details : -Manufacturer- DRAWEBA - Model - DDANS 17 l Bcedpfx Afelf Iqnehsu - Year - 1978 - Wire Diameter - 1,4 -1,6 mm - Mesh opening size - 10x10 mm min. - Mesh width - 1600 mm

Condition: excellent (used), Year of construction: 2003, working width: 215 mm, welding power (max.): 750 kVA, Complete Mesh welding/Lattice girder factory Factory consists : - Mesh welding line SCHLATTER PG 24 , Semi- automatic , Year - 2002 Bedpfsqy Ek Aox Afhecu - Lattice Girder Line SMEI , Full automatic , Year - 2003 - Straightening and cutting machines 1x Wafios R4 2 x VITARI NR16 1X VITARI NR10 - Cold drawing line SMEI , Input wire max.10mm, Speed - 4m/sec. - But welding achine SMEI - Wire sharpener SMEI