Used Multipli for sale (18)

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 97651504, WITH STAND Format (mm): max. 297 x 420 // min. 105 x 148 Bdodpfx Ajy Hi Abemned Pockets: 2 Folding arts : Letter fold, zigzag fold, double parallel, single fold

Condition: good (used), Year of construction: 2001, MB Baeuerle Multipli CAS-524 Bsdpfxoh Ighhj Amnjdd flat pile feeder 4 buckle plates noise reduction hoods delivery conveyor belt

Condition: used, machine/vehicle number: 78261, Folding machine MB multipli-cas 524 Serial-No. 78261 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Bsdpfsh Axynox Amnodd On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 83357220, Falzmaschine / Folding Machine (Pharma-Fold) Multipli 464SSerial-No. 83357220 Unterflur-Sauganleger / Non-Stop Feeder Anleger Format / Feeder Size min. 10x10cm - max. 45,5x63cm Leistung / Output max. 220m/min Papiergewicht / Paper weight 40-200g/m2 4 Taschen 4 Bogenweichen / 4 Buckles 4 Deflectors 1 Kompressor / 1 Compressor Schuppenauslage / Stream Delivery Online-Video-Inspection by Skype-Video Bsdperl Rdqofx Amnjdd We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1982, machine/vehicle number: 44560, Ersatzteile - Spare Part MB Multipli 3822 folding buckles for MB 382 Band delivery for MB 382 Online-Video-Inspection by Skype-Video Bjdpsh Ax Dcjfx Amnsdd We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 2009, condition: excellent (used), Folding machine in excellent condition, changed all fold rollers, air suction feeder with alignment rail, total and batch counter, double sheet control, four manual adjustable fold plates, max. 350 x 450 (640) mm min. 85 x 120 mm Bsdopdnlhopfx Amnsdd fold length from 50 to 360 mm paper weights from 40 up to 250 g/m² speed up to 160m/min 230 V / 10A

Condition: repair required (used), Folding machine for sale. Brand: MB, type 35. Maximum paper size: 35 x 45 cm. 220 volts, 20,000 sheets per hour. The rubber rollers aren't optimal, but they still fold well. Bedjw N Rhvspfx Amnodd The counter isn't working. The machine also needs to be cleaned. Of course, you are welcome to test the machine with us. We can arrange transport/packaging for you and load it onto a truck or into a container. Please ask for a price including transport (location: the Netherlands). Kind regards, Henk Hoos.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: AC, total length: 1,642 mm, total height: 2,055 mm, total width: 3,594 mm, input voltage: 220 V, overall weight: 1,834 kg, compressed air connection: 6 bar, warranty duration: 12 months, working height: 850 mm, Equipment: documentation/manual, EDDA NEOBOX Series | High-Performance Intelligent CNC Cardboard Box Making Machine The NEOBOX Series is a state-of-the-art, fully automatic CNC cardboard box cutting and creasing machine engineered to deliver just-in-time, made-to-measure packaging solutions. Featuring industry-leading automation, premium components, and an intelligent zero-waste design, it eliminates standard packaging inventory costs and optimizes cardboard consumption. Next-Generation CNC Control & Advanced CAD/CAM Software: Elite Italian TPA CNC Controller: Powered by a Windows-based industrial OS and driven by the prestigious Italian TPA CNC system, backed by 40 years of specialized cardboard software expertise. Free Integrated CAD/CAM Software: Supplied with an advanced, complimentary CAD/CAM suite, allowing customers to design unlimited custom boxes without restriction. 50+ Pre-loaded FEFCO Codes: Over 50 standard FEFCO packaging designs come pre-programmed and ready to manufacture instantly. One-Click Macro Operation: Custom layouts can be saved as macros. An unskilled operator can easily run the machine simply by selecting the template and entering 3 dimensions (Length, Width, Height) and the desired quantity. Smart Production & Advanced Waste Reduction: Dual-Zone Stock Feeding: Equipped with left and right working zones, accommodating two different cardboard sheet widths simultaneously. The machine automatically selects the best width to minimize waste. Automatic 90° Orientation: The intelligent software automatically rotates the box layout 90 degrees if it results in lower material waste. Bdjdpjy Iby Iofx Amnod C-Suite Multi-Magazine Upgrade (Optional): Can be retrofitted with the "C-Suite" system holding up to 10 fanfold cardboard magazines of varying widths, slashing material waste down to a minimal 2% to 3%. Side-by-Side Multi-Production: Configured to process 2 or 3 narrow cardboard sheets simultaneously (depending on blade setup), multiplying production output by 2x to 3x. High Speed, Premium Components & Smart Industry 4.0 Integration: Outstanding Output: Delivers high-speed cutting and creasing, producing between 2 to 10 boxes per minute (depending on box complexity and dimensions). World-Class Hardware: Fully integrated with ultra-reliable Panasonic servo motors & drives, alongside premium SMC or Festo pneumatic systems. Seamless ERP & Smart Scanning Integration: Features XML-format data structure for full integration into user ERP systems for continuous, fully automated, operatorless inline workflow with real-time ERP feedback. Barcode & QR Code Automation: Connects via wired or wireless barcode/QR scanners to automatically generate custom boxes on-demand, completely removing operator error. Remote Office Planning & Control: Fully operational from the central planning office via integrated remote desktop software. Integrated Intelligent Printing (Optional): Optional label printer integration for automated batch, single, header, or footer labeling. Scalable Blade Tooling: Standard configuration begins with 7 vertical blades and is customizable up to 16 blades for advanced, complex packaging designs. For specific engineering inquiries, customized configuration proposals, or an interactive video demonstration, please submit an inquiry form directly via Machineseeker.

Condition: refurbished (used), Year of construction: 2006, power: 90 kW (122.37 HP), fuel type: electric, volume flow: 1,000 m³/h, pressure (max.): 7.5 bar, type of cooling: air, We offer this refurbished Atlas Copco GA90 rotary screw compressor, year 2006. Bdedpfxeyxy Dae Amnod The compressor was imported from Europe and has not been operated in Ukraine. Comprehensive repairs have been carried out, including replacement of the screw block bearings and gearbox (multiplier) bearings, shaft seal replacement and bushing, replacement of the flexible coupling for torque transmission, replacement of the electric motor bearings, as well as replacement of all filters and oil. A new inlet valve with a new solenoid valve has been fitted. The thermostatic valve has been overhauled with a new repair kit, as well as the minimum pressure valve, oil-stop valve, check valve with repair kits replaced, and the condensation drain valve has also been serviced. A new Elektronikon compressor control unit has been installed. The hydraulic hoses have been replaced and the oil system has been cleaned. Delivery across Europe can be arranged.

Condition: used, maximum load weight: 36,040 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2025, next inspection (TÜV): 05/2027, Equipment: ABS, You can find our complete vehicle inventory with vehicles available immediately and in the short term on our website. Excerpt from the equipment. Complete equipment available upon request. Chassis Bdodpezc A Afsfx Amnod * Regular ladder frame in lightweight steel with continuous crossmembers * With an extension of the chassis frame, the coupling plate is approximately 8 mm thick * with a 2-inch kingpin according to DIN 74080 / ISO 337 Suspension * Axle lift mechanism on axle 1 * Three-axle unit SAF INTRADISC * with disc brakes Ø 430 mm * ET 120 air suspension with approximately 180 mm travel Tires * Wheels with internal sensors according to UN ECE R141 * 6x 385/65 R 22.5 UNIROYAL TH 50 * 6 steel rims 22.5 x 11.75 * Offset approximately 120 mm (ET 120) Chassis components * Mechanical fifth wheel with leveling foot, approximately 24 t lifting capacity, single-sided operation on the right-hand side while driving * Storage box for: 10 side panels, folding stakes, and rear gate, fully enclosed, protected against spray water, also serves as a side protection device * 2 plastic toolboxes, waterproof, dimensions (internal) approximately 545 x 400 x 400 mm, installed at the rear, 1x on the left and 1x on the right Brake / Air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS plug connection ISO 7638 (without connection lines) * Parking brake as a spring brake, external pneumatic connections as well as an external EBS diagnostic connection via ISO 7638 plug connection * WABCO EBS system * Air suspension system including 1 lifting and lowering valve, mounted on the left-hand side behind the axle unit while driving, driving position is set automatically * 2 non-interchangeable coupling heads at the front ISO 1728 * Air tanks for the brake system and air reservoir made of steel (EN 286-2) Floor * Flat floor approximately 30 mm thick, multiply laminated plywood * Floor sealed around the perimeter * Stake pockets for square tube inserts approximately 80 x 80 mm * Storage for a maximum of 14 square tube inserts approximately 80 x 80 (length 1,990 mm) on the front wall inside Front wall * Front wall approximately 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame * 2 pairs of lashing points (permissible lashing force approximately 1,000 kg per ring) on the front wall according to EN 12640, Note: If the front wall is used for securing the load, suitable lashing straps must be used to tighten the load, if the vehicle is operated without side panels and a rear gate Rear wall * Folding rear wall approximately 600 mm made of aluminum hollow profiles with 3 tension bars and T-handle locks * 2 folding steps on the inside, folding steel corner posts at the rear in the height of the side panels Side wall * 4 pairs of folding stakes in the height of the side panels * VarioFix steel hole outer frame * 4 pairs of stake holders for folding stakes on the outer frame (evenly distributed) * 24 pairs of lashing eyes in the outer frame (according to EN 12640), permissible tensile force approximately 5,000 kg per ring Side panels * 5 pairs of folding side panels approximately 600 mm made of aluminum hollow profiles with tension bars Electrical / Electronics * Lamp carrier made of steel, arranged above the underrun protection * KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED outline lights and reflectors at the front, flashing LED side marker lights, Superseal and bayon

Condition: new, Year of construction: 2026, power: 80 kW (108.77 HP), temperature: 230 °C, inner dimension length: 3,200 mm, inner dimension width: 1,400 mm, inner dimension height: 2,370 mm, total length: 3,960 mm, total width: 1,880 mm, total height: 3,370 mm, control type: PLC-controlled, Equipment: CE marking, Powder coating Oven (Oil/Gas) Internal dimensions LxWxH: 3200 x 1400 x 2370 mm External dimensions LxWxH: 3960 x 1880 x 3370 mm Fuel: Oil or GAS, buyer can choose the burners Heating power: 80 kW (1 burner) Maximum working temperature: 230C; Heat resistant recirculating fans: 1 x 1,1 kW 10""Touch screen“ control Functions: preheating, degassing, drying, polymerisation Temperature sensors in working chamber: 2 vnt. Two wing doors on one side Ready for 4 rails (rails not included) Key features: Solid construction Special frame design reduce heat loss Removable side panels for easy maintenance Equipped with special located ventilation slots - keep insulation material in order Stainless steel panels in Heat exchanger zone Inhouse engineered heat resistant fans - cool, quiet, long - life Doors equipped with explosion proof, adjustable lathes Special design door handles for lower heat transfer Reliable Italian RIELLO burners Control Features 10"touch screen control Standard programs: Preheating, Degassing, Curing, Drying Stores multiply curing recipes Integrated safety features HNS - heat management system, measures air temperature in few points. prevents overheating of curing parts Drying mode - time control exhaust and blow-in fresh air Vent mode - for higher finish quality Delivery in 2 weeks after payment WARRANTY: 12 month We can organise delivery accross the EU for speacial price. PRICES are EXCLUDING VAT. Bjdpoy Uxrnofx Amnodd WE ARE LOOKING FOR SALES PARTNERS

Condition: new, Year of construction: 2026, temperature: 230 °C, inner dimension length: 3,800 mm, inner dimension width: 1,600 mm, inner dimension height: 2,270 mm, total length: 4,560 mm, total width: 2,080 mm, total height: 3,270 mm, control type: PLC-controlled, Equipment: CE marking, Internal dimensions LxWxH: 3800 x 1600 x 2270 mm External dimensions LxWxH: 4560 x 2080 x 3270 mm Fuel: Oil or GAS, buyer can choose the burners Heating power: 160 kW (2 burners in total) Maximum working temperature: 230 o C; Heat resistant recirculating fans: 2 x 1,1 kW 10""Touch screen“ control Functions: preheating, degassing, drying, polymerisation Temperature sensors in working chamber: 2 vnt. Two wing doors on both sided (tunnel) Ready for 5 rails (rails not included) Key features: Solid construction Special frame design reduce heat loss Removable side panels for easy maintenance Equipped with special located ventilation slots - keep insulation material in order Stainless steel panels in Heat exchanger zone Inhouse engineered heat resistant fans - cool, quiet, long - life Bdodpfey Ud H Rex Amnod Doors equipped with explosion proof, adjustable lathes Special design door handles for lower heat transfer Reliable Italian RIELLO burners POWDER COATING OVEN FLOWSYNC Control Features 10"touch screen control Standard programs: Preheating, Degassing, Curing, Drying Stores multiply curing recipes Integrated safety features HNS - heat management system, measures air temperature in few points. prevents overheating of curing parts Drying mode - time control exhaust and blow-in fresh air Vent mode - for higher finish quality WE ARE LOOKING FOR SALES PARTNERS

Year of construction: 2000, condition: like new (used), functionality: fully functional, Laroche Airlay carding machine for short fiber layering. It produces layers for needling or thermal bonding for upholstery, underlays, insulation, and automotive applications. In practice, on your production line, the 2,400 mm working width covers bedding, felt, and geotextile formats without prior cutting. The integrated weighing table stabilizes the basis weight continuously, and the installed power of 51 kW maintains the production rate with dense fibers. Detailed product description: The Laroche textile machine for layering non-woven fibers. Designed for layering short and coarse fibers, this Laroche Airlay carding machine forms layers for needling or thermal bonding. It is suitable for upholstery, underlays, thermal and acoustic insulation felts, automotive carpets, and agricultural geotextiles. In reality, a well-maintained used machine provides real production flexibility across several markets without multiplying changeover operations. Production characteristics and weight control: The 2,400 mm working width covers standard bedding, insulation, and geotextile formats, with less trimming required at the output. What truly changes in production is the integrated weighing table: it allows for quick correction of basis weight variations and limits waste at startup and during steady-state operation. The installed power of 51 kW supports the line when the material load becomes irregular or denser. The speed of up to 10 m/min is adjusted according to the layer weight and the type of fibers, which allows for a balanced approach between hourly output and layer uniformity. Production versatility and textile recycling: The adjustable layer weight of 500 to 1,500 g/m² covers lightweight underlays, heavier insulation felts, and upholstery items. In practice, on your production line, this range avoids dedicating a machine to each product family and reduces internal transfers. The machine accepts both natural and recycled fibers. On a non-woven line, I prefer this type of carding machine when it is necessary to absorb variations in raw materials while maintaining a usable layer before consolidation. Textile and non-woven sectors covered by this carding machine: This carding machine meets the needs of upholstery and bedding, underlays for footwear and clothing, thermal and acoustic insulation felts, automotive carpets, and agricultural geotextiles. First and foremost, it is important to verify the compatibility between your fiber mix, your target basis weight, and the expected uniformity downstream. The 2,400 mm width and the adjustable layer weight make it a suitable piece of equipment for a workshop seeking versatility without complicating operations. What the technical data sheet does not say is that this type of configuration also simplifies medium-sized production runs when switching from one application to another with minimal downtime. Bsdjy Urmlopfx Amnodd

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction MG 3 ST Circular Saw Fully Automatic PROFILMA 502 Fully automatic operation, 7.5 kW drive, S6, 400 V, 50 Hz, 2850 rpm. Suitable for saw blades Ø 550 mm, cutting capacity 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm. Equipped with Siemens S7 controller with touch display incl. piece counter. Includes CPU 315 and Flexisoft, batch multiplier for bundle material processing. Cycle time indication in seconds, chain dimensions, includes reversing device for cut lengths up to 4 m max. Automatic shut-off via limit switch at end of material, fault diagnostics, including IXON router for VPN connection (see datasheet). Motorized saw blade feed, steplessly adjustable, vertical and horizontal clamping from bottom to top (both on feed and discharge side of saw head). Cutting gap extension on both sides of the saw blade. Electronic material feed unit with 800 mm feed length, utilizing ball screw and servomotor, including pneumatic horizontal and vertical clamping system. The profile support area in the feed zone is equipped with a lift/lower roller. Remnant cut from 75 mm, profile-dependent. Clamping pressure reduction horizontally and vertically with 6 pressure regulators. Intermittent spray device with level monitoring and automatic shut-off, 1-liter lubricant reservoir. Noise protection package—frame interior lined with soundproofing mats. Two extraction nozzles Ø 100 mm. Safety guard over both the saw head and the feed unit. 740 mm roller conveyor with intrusion guard on the infeed side, 450 mm pertinax tabletop with intrusion guard on the outfeed side. MG 3 Chip Extraction Bdedpfxsy Dtpmj Amnjd Dust and chips are collected in a 172-litre metal container, which is removable for easy emptying. Two outlets with 100 mm hose adapters (no extraction hose included). 3.0 kW drive, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Large filter surface, pneumatic shaker unit for filter cleaning, filter class M. Max. noise level 80 dB(A). Selector switch for continuous operation or saw-controlled operation (no power cable). Painted: RAL 7035 / 9016.

Year of construction: 2021, condition: new, Layout: Shears Attachment suited for: Construction machines Hydraulic crusher for the primary demolition phases equipped with power booster multiplier valve. Shear weights: from 1800 to 3100 kg Excavator weights: from 15 to 40 tons Jaw openings: from 850 to 1250 mm 360° rotation: YES *On site, reducing the opening/closing cycle of the jaws translates into time gained and a substantial increase in productivity. Bdjdpfsph Rm Dex Amnsd *Synchronized linkage system allows simultaneous opening/closing of the jaws *Heavy duty cylinders and protectors *High penetration jaws profile *Hardox 550/ 600 reversible blades We can manufacture high quality demolition shears with competitive prices. For detailed information, please contact us

Condition: excellent (used), Year of construction: 2020, Bito system construction platform Multi-storey Due to the modular design, the platform can also be set up and used as a single-storey platform. The goods elevator can be purchased as an option. Multi-storey system from Bito For large product ranges and high picking capacities Multi-storey systems (MGA) increase the degree of space utilization by up to 100 percent and multiply the usable storage area. At the same time, the height of the warehouse is optimally utilized The integration of shelving racks enables direct access to all unit loads, even if your product range is large and constantly growing. In addition, process-oriented storage and picking is possible (fast-moving items on lower levels, slow-moving items above), which significantly increases the efficiency and speed of your warehouse management Make: BITO Type: C-perforated profile Year of construction: 2020 per floor: approx. 218 m² Floor + 2 storage levels (ground floor/1st floor/2nd floor) 654 m² Floor area: 9,964 x 21,939 mm 38 mm chipboard covering: white/grey Bdodpfxevi H Ems Amnod Load capacity: 500 kg/m² Floor height: 2,540 mm each Clearance height: 2,250 mm Stairs and stairways are not part of the platform the lighting is also not included in the scope of delivery Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, This listing is for a Thermo Scientific MaxQ 8000 Orbital shaker incubator The unit is in full working condition and is ready for immediate release. The Thermo Scientific MaxQ 8000 is an orbital shaker incubator — a piece of lab equipment that combines controlled shaking and temperature control in one unit. It’s designed for biological and biochemical workflows where maintaining both a constant temperature and agitation are important, such as: - Cell culture (bacteria, yeast, insect or mammalian cells) - Fermentation - Protein expression - Hybridization and DNA work - Solubility studies and other mixing tasks How It Works - Orbital shaking: The platform inside moves in a circular (orbital) motion to mix or agitate samples evenly. - Temperature control: It incubates samples at controlled temperatures — typically from above ambient up to ~60 °C, and in refrigerated models also below ambient — so you can grow cultures or perform temperature-sensitive reactions. - Stackability: Units can be stacked 2–3 high to multiply capacity without using more floor space. Key Features - Temperature range: Ambient +10 °C to ~60 °C (or lower if refrigerated version) - Speed range: ~25–400 rpm for shaking with accurate control - HEPA-filtered chamber: Promotes clean air and reduces cross-contamination risk inside the incubator for better culture conditions. - Slide-out platform: Makes loading and adjusting flasks easy. - Microprocessor controls: Digital display and alarms for monitoring temperature, speed, and time. - Typical Applications - Growing microbial or cell cultures - Protein expression studies Bedpfxsylapns Amnedd - Hybridization reactions - Solubility assays - General mixing where precise temperature control is needed alongside agitation.

Condition: used, This listing is for a Hanna HI 93728 Nitrate-Nitrogen Photometer. The unit is in full working condition and is ready for immediate release. Overview of Nitrates and Measurement Importance Nitrates are naturally occurring compounds produced from the decomposition of organic matter or from fertilizers. However, they can be converted to nitrites, which pose health risks. Guidelines for Nitrate Levels: Global Maximum: 45 mg/L for nitrates in water. Bdsdexxyimspfx Amned Europe: 50 mg/L for potable water. USA (EPA): 10 mg/L for nitrate nitrogen (NO₃-N), which equates to 45 mg/L of nitrates. HANNA® HI 93728 and HI 93828 Meters These handheld meters are designed for field measurements of nitrate levels with ease and accuracy. Key Features: HI 93728 Meter: Measures nitrogen nitrate from 0 to 30 mg/L (NO₃-N). To convert to nitrate concentration, multiply the reading by 4.43, allowing a maximum reading of up to 133 mg/L of nitrate (NO₃). Measurement Range: 0.0 to 30.0 mg/L (NO₃-N) Resolution: 0.1 mg/L Accuracy: ±0.5 mg/L ±10% of reading Light Source: LED at 555 nm Light Detection: Silicon Photocell Battery Type/Life: 1 x 9V with approximately 40 hours of continuous use. Operating Environment: 0 to 50°C (32 to 122°F); RH max 95% non-condensing Dimensions: 180 x 83 x 46 mm (7.1 x 3.3 x 1.8 inches) Weight: 290 g (10 oz.) Method: Adaptation of the cadmium reaction method, producing an amber tint in the sample upon reaction with nitrate-nitrogen.