Used Metal Spinning Machine for sale (66,766)

Condition: used, Year of construction: 2007, working width 1380 mm workpiece height 70 mm Njdpfx Ahjt Hw Iienelf total power requirement 45 kW weight of the machine ca. 5.500 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3585, Offer 25255 Technical data: - Saw blade diameter up to 300 mm Nodpfx Ahjy R Ablsnslf - Saw blade feed via hand lever - Maximum vise opening width: 145 mm - Cutting capacity with saw blade diameter 300 mm: - At 90°: round 95 mm flat 125 x 90 mm - At 45°: round 95 mm flat 95 x 85 mm - Mitre adjustment: left up to 30° / right up to 45° - Saw blade speeds: 20 and 40 rpm - Drive: 400 V / 1.6 / 2.1 kW - Coolant system - Discharge roller table: 1500 mm - Required space approx. W 600 x H 2000 x D 800 mm - Weight approx. 250 kg

Condition: good (used), Year of construction: 1985, machine/vehicle number: 2.309.044, Offer 23195 Precision - deburring - faceting milling machine / edge milling machine Technical data: Steel - stainless steel - aluminum - plastic ,machining deburring and faceting process is done with milling cutter Bevel angle 45 ° bevel width infinitely variable length of guide bar 500 mm working height 750 mm Nedpfonvdtcox Ahnjlf speed 2750 rpm drive 400 V / 0,7 kW space requirement approx. W 500 x D 400 x H 8500 mm Weight approx. 30 kg

Condition: good (used), Year of construction: 2004, Offer 24455 Technical data: - Saw feed via hand lever - Saw blade diameter 315 mm - largest opening width vice approx. 160 mm Nodpfx Asuv Eygohnelf - Cutting range approx. at 90° approx. 100 mm - flat up to 135 x 80 mm - Cutting range Li + RE at 45° approx. 108 mm - flat up to 100 x 80 mm - Cutting range Li at 60° approx. 80 mm - flat up to 70 x 80 mm - Cutting speeds approx. 33 + 66 rpm - Drive 400 V / 1.3 / 1.8 kW - Coolant device - Space requirement approx. W 950 x H 1600 x D 950 mm - Weight approx. 270 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: 103 2583310, Offer 25326 Technical Data: - Saw blade diameter up to 400 mm - Cutting capacity at 90°: - Round: 130 mm - Square: 120 mm - Rectangular: 300 x 40 mm or 240 x 80 mm - Cutting capacity at 45°: - Round: 130 mm Nljdpfx Asx Sxx Aehnof - Square: 110 mm - Rectangular: 245 x 40 mm - Mitre adjustment left & right each 0–90° - 2 cutting speeds - Drive: 400 V / 1.26 / 2.5 kW - Saw blade feed rate hydraulically infinitely adjustable - Coolant system - Required space approx. W 1100 x H 1980 x D 1210 mm - Weight approx. 950 kg - Infeed and outfeed roller conveyors with length stop, each 6000 mm

Condition: good (used), Year of construction: 1988, machine/vehicle number: 109884, Offer 26167 Technical data: - Saw blade diameter up to 400 mm - Cutting range at 90°: - Round 130 mm - Square 120 mm - Rectangular 300 x 40 mm - or 240 x 85 mm - Cutting range at 45°: - Round 130 mm - Square 110 mm - Rectangular 245 x 40 mm - Miter adjustable left and right, each 0 - 90° - 2 cutting speeds: 13 + 26 m/min - Drive: 400 V / 1.2 / 1.8 kW - Feed rate of the saw blade, hydraulically continuously adjustable - Vertical material clamping - Coolant system - Space requirement: approx. W 800 x H 1850 x D 1100 mm - Weight: approx. 850 kg - Infeed – roller conveyor with storage area: 4000 mm - Outfeed – roller conveyor with measuring stop: 4000 mm Nledpjzibmbefx Ahnjf

Condition: used, Year of construction: 1981, machine/vehicle number: 55848, Lg. No. 24029 Technical Specifications: - Saw blade diameter up to 400 mm - Cutting range at 90°: round 130 mm - square 120 mm - rectangular 300 x 40 mm - or 240 x 85 mm - at 45°: round 130 mm - square 110 mm - rectangular 245 x 40 mm Nodpowk Icbsfx Ahnjlf - Miter adjustable left and right 0 - 90° each - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Saw blade feed speed continuously adjustable hydraulically - Coolant system - Automatic material refill system - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

Condition: good (used), Year of construction: 1995, Offer 73066 Technical data: Nlodsw R Tcxepfx Ahnef - Abrasive belt dimensions approx.: 2000 x 150 mm - Surface grinding opening approx.: 560 x 150 mm - Abrasive belt speed approx.: 30 m/sec - Contact wheel: W 150 / D 200 mm - Drive wheel: W 150 / D 200 mm - Drive: 400 V / 3 kW - Adjustable working height - Separate motorized dust extraction - Required space approx.: W 750 x H 1050 x D 1500 mm - Space requirement for extraction unit approx.: W 750 x H 1250 x D 750 mm - Weight approx.: 180 kg

Condition: good (used), Year of construction: 1990, machine/vehicle number: V 254629, Offer 25311 Technical Data: - Cutting length: 250 mm Njdjxqzirjpfx Ahnelf - Cutting angle: 90° - Cutting capacity: - Mild steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate: up to approx. 55 / min - Table size: W 800 x D 800 mm - Working height: approx. 940 mm - Stops infinitely adjustable in length and angle - Drive: 400 V / 4 kW - Oil filling: 50 l - Electric foot pedal - Required space: approx. W 1300 x H 1250 x D 1300 mm - Weight: approx. 800 kg - Mobile base frame

Year of construction: 2004, condition: good (used), machine/vehicle number: 0441057, Offer 23300 Technical data: - Sanding belt dimension 75 x 2000 mm - surface grinding opening 75 x 300 mm - support vice - angle adjustable 90° - 30 ° - grinding belt speed 15 + 30 m/sec. - possible contact rolls Ø 20 - 76 mm - contact roller length 75 mm - drive 400 V / 2,2 / 3 kW - drive speeds 1440 / 2880 rpm - 1 piece contact roll 48 mm - space requirement approx. W 800 x H approx. 1000 x D 1300 mm - weight approx. 250 kg Nledpfx Ahepug D Esnef

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Technical Data: - Manual bandsaw machine - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm - Max. clamping capacity: 205 mm Njdpfx Ahjxta N Asnelf - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm - square 160 mm - flat 200 x 100 mm - 45° left & right: round 140 mm - flat 140 x 60 mm - Drive: 400 V / 1.5 / 1.8 kW - Coolant system - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg - Space requirement: approx. W 1100 x H 1700 x D 1550 mm

Condition: good (used), Year of construction: 1999, Offer 22648 Nljdpfx Aop H Tvxjhnef Technical data: - Sanding belt dimension approx. 2000 x 50 mm - grinding belt speed approx. 30 m/min - contact wheel B 50 / D 300 mm - drive wheel B 50 / D 200 mm - adjustable belt centering - drive 400 V / 2880 rpm / 5,5 kW - space requirement approx. W 500 x H 1000 x D 1400 mm - weight approx. 80 kg

Condition: new, Year of construction: 2026, MBSM 150-20 For grinding surfaces, edges, and for rounding High-torque motors with vibration-free operation to achieve the best grinding results Working height adjustable by stepless tilting of the grinding unit Njdjhk Df Dspfx Ahnslf Workpiece support adjustable in angle Continuous flat grinding surface allows grinding of even long workpieces One dust extraction port each on the spark guard and on the rear band roller Protective cover can be folded away Quick belt change in seconds thanks to the quick-release system Simple adjustment of the belt path via adjusting screw Motor with brake and safety switch Dimensions and weights Length approx. 527 mm Width/Depth approx. 995 mm Height approx. 1025 mm Weight approx. 114 kg Dust extraction Nominal size of dust extraction port, external 60 mm Electrical data Connection voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idle, without dust extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Grinding belt length 2000 mm Grinding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Njdpfoyga T Nsx Ahnelf Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Nlodpfxsyhnukj Ahnsf Original TRUMPF transport case Manufacturer’s manual / documentation Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: excellent (used), Year of construction: 2000, Ref:11124 . 2000 Rimagraf Multi Clipper Metal Cornering Machine. A semi-automatic electric and pneumatic two-head machine that simultaneously applies and presses two SYMMETRICAL metal corners of any type and size. The left head is fixed, while the right one can be easily adjusted (from a minimum of 120 mm to a maximum of 500 mm) depending on the size of the cover you are using. Nlodpfxozmx Hmo Ahnjf The corners are placed in the two loading tanks, which rotate to place them on the guide channels. Finally activate the pressing cycle using the foot pedal. Size-change requires only minimum adjustment. Technical data: Manual load Pneumatic connection required Operating voltage: 380V, 50-60Hz Dimensions: 600 x 1250 x 1400 mm Total weight: 180 kg.

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 1,100 mm, power: 19 kW (25.83 HP), DM1100 DC EVO Removal of solid slag Edge rounding up to 1100mm width. DM1100 DC EVO deburrs and rounds inside and outside contours of thick steel parts, mainly cut with plasma or oxyfuel. The DM1100 DC is equipped with a large deburring roller for removing heavy burrs and two counter-rotating cross belts. These ensure that the edges are rounded with even and soft edges. This machine impresses with a vertically movable sanding roller to compensate for tolerances and a wide magnetic range to ensure that even small parts can be processed safely. DM1100 DC Working capacity (mm) 1100x120 No. sanding rollers (D) 1 No. of cross belt stations (C) 1 Sanding drum specifications Ø435mm 20SH Sanding belt, dimensions (mm) 1150x1520 Sanding drum speed (rpm) 185-650 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.5-4.0 Sanding drum motor (kW) 11 Nedpfx Ahjtzkg Usnolf Cross belt motor (kW) (2x) 3 Feed motor (kW) 0.37 Total power (kW) 19 Rod suction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2258x2900x2220 Weight (kg) 4100

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, working width: 550 mm, power: 32 kW (43.51 HP), empty load weight: 3,000 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum working width: 550 mm MACHINE DETAILS Power: 32 kW Dimensions & Weight Dimensions (L x W x H): 1,700 x 2,700 x 2,900 mm Empty weight: 3,000 kg Control: Conventional Wet/Dry: Dry EQUIPMENT Station type 1: Belt sander CE marking Nsdpszk Dyyjfx Ahnjlf

Year of construction: 2022, operating hours: 50 h, condition: excellent (used), functionality: fully functional, Assonic Ultrasonic Compact Sieving Machine CSM-500 SPC – Inertizable - Ultrasonic sieving combined with low-frequency excitation - Control panel for manual operation or integration into process workflows - Inlets and outlets: ISO-KF40 - Prepared for inertization (sieving with < 2% residual oxygen possible) - Incl. dosing unit and bottle holder - Gas connection with quick connector Specifications (excerpt from Assonic website) - Approx. 400 kg/h 316L at 63 μm - Approx. 100 kg/h AlSi10Mg at 63 μm Nedpfoywhvnex Ahnslf - ATEX certification possible - Small footprint - Standalone machine - Low CO² footprint Accessories: - Laminate sieve 43 µm (new) - Laminate sieve 20 µm (new) - Laminate sieve 63 µm (used, for aluminum materials) Condition: - Very good condition, normal signs of use - Ready for operation - Scope of delivery: as described - Price: plus shipping costs - Sale exclusively to businesses - Sale without any warranty - No guarantee, no returns - Sold as inspected or as described - Liability for consequential damages excluded - Errors and prior sale reserved - All information subject to change

Condition: good (used), Year of construction: 1994, Offer 24186 Technical data: - Manual saw blade feed - Workpiece clamping in the machine vice - Saw blade diameter up to 315 mm - 2 cutting speeds: 40 - 80 m/min - Cutting range: at 90° - Round: 110 mm - Rectangular: 82 x 160 mm Nlsdozqtrfjpfx Ahnsf - Square: 82 x 82 mm - Miter cut: at 45° - Round: 110 mm - Rectangular: 80 x 120 mm - Square: 82 x 82 mm - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Space requirement: approx. W 600 x H 1600 x D 750 mm - Weight: approx. 300 kg

Condition: good (used), Year of construction: 1996, machine/vehicle number: 5562, Offer 24212 Nljdjzqtntjpfx Ahnof Technical data: - Saw blade diameter: up to 350 mm - Saw blade feed via hand lever - Maximum opening width of the vise: 205 mm - Cutting range: - with saw blade diameter of 350 mm - at 90°: - round: 120 mm - square: 110 mm - rectangular: up to 200 x 90 mm or 140 x 110 mm - at 45°: - round: 100 mm - rectangular: 100 x 100 mm - Miter adjustable: - Left: up to 45° - Right: up to 30° - Saw blade speeds: 34 + 68 1/min - Drive: 400 V / 2 / 2.6 kW - Coolant system - Feed – roller table: 2000 mm - Space requirement: approx. W 850 x H 1750 x D 950 mm - Weight: approx. 400 kg

Condition: used, Year of construction: 2025, 12 months warranty Nlodpfx Ahozp Drmjnsf

Condition: used, Year of construction: 2003, total width: 2,700 mm, total height: 2,900 mm, total length: 1,700 mm, Colour: White Empty weight: 3.000 kg - Year: 2003 Nodpfxozkkd Sj Ahnelf - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 0312101 - Drive system: Conventional - Wet/dry: Dry - Number of stations [pcs]: 1 - └ Station type 1: Abrasive belt - Power [kW]: 32 - Max. working width [mm]: 550 - Transport dimensions: 1700mm x 2700mm x 2900mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2026, condition: new, functionality: fully functional, # Sheet Metal Beading Machine ETB 40 – Metal Technics Polska ## Professional Sheet Metal Beading Machine The ETB 40 Sheet Metal Beading Machine is a robust and efficient machine designed for producing beads, grooves, flanges, reinforcing ribs, and other forming operations in sheet metal. Thanks to its heavy-duty construction, high precision, and a wide range of interchangeable forming rolls, it is ideal for metal fabrication workshops, HVAC duct production, sheet metal processing, and general industrial manufacturing. The machine enables fast and accurate production of repeatable profiles, improving productivity while maintaining excellent quality. ## Key Features * Maximum sheet thickness: 4 mm * Powerful 2.2 kW electric motor * Heavy-duty steel construction * 300 mm throat depth * Precise material guidance * Suitable for a wide variety of beading and flanging operations * Quick and easy roll replacement * Ideal for HVAC, tanks, enclosures, and steel fabrication * High manufacturing quality * Machine available from stock ## Technical Specifications * Model: ETB 40 * Maximum sheet thickness: 4 mm * Roller width: 165 mm * Throat depth: 300 mm * Roller speed: 15.3 rpm * Motor power: 2.2 kW * Dimensions (L × W × H): 1550 × 510 × 1180 mm * Weight: 341 kg ## Applications The ETB 40 is ideal for manufacturing: * HVAC ducts and fittings * Air-conditioning components * Cylinders and tanks * Machine enclosures * Decorative sheet metal components * Flanges, reinforcing beads and stiffening profiles * Components for the automotive and steel fabrication industries ## Heavy-Duty Construction The machine is built on a rigid welded steel frame, ensuring excellent stability, high precision, and long service life even under intensive industrial use. ## Easy Operation Nljdozkubzopfx Ahnof The ergonomic design and intuitive controls allow fast roll changes and quick machine setup for different forming operations. This makes the ETB 40 suitable for both small workshops and high-volume production. ## Transport & Technical Support We organize machine transportation throughout Europe as well as to countries outside the European Union. Every transport quotation is prepared individually based on the delivery destination. We provide professional technical advice, warranty and after-sales service, and ongoing technical support from our specialists. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. ## Why Choose Metal Technics Polska? For many years, Metal Technics Polska has been supplying high-quality metalworking machinery to customers across Europe. We provide complete support—from technical consultation and machine selection to transportation, commissioning, and long-term after-sales service. If you would like to receive a quotation or learn more about this machine, please contact our sales team. Visit the Metal Technics Polska website to explore our complete range of sheet metal working machines and discover our latest products and promotions.

Condition: excellent (used), functionality: fully functional, We are offering a high-productivity 3D printer designed for industrial serial production. Trumpf TruPrint 3000 G02, featuring Zirox sensor, single laser, and powder bed monitoring options. Trumpf TruPrint 3000, including filtration system Serial number: S0721Q0022 Laser runtime: 17,508 hours (laser beam on) Most recently used with AlSi10Mg aluminum alloy The 3D printer has already been dismantled by the manufacturer. Dismantling and functional test reports are available, confirming the machine was operational prior to dismantling. All axes have been professionally secured for transport. The machine can be transported on a standard truck. Accessories: Nledpfxezpvums Ahnef 4x dosing containers 1x build cylinder 1x overflow container Various spare parts (e.g., protective glass) Manuals An Armanni CAR.Elev. pallet truck for container exchange is also in stock and available as an optional add-on. Faster production of high-quality 3D components D1. Machine concept The TruPrint 3000 is a versatile medium-format machine featuring external part and powder management for the industrial production of complex metal components via 3D printing. Thanks to its large build volume, it offers great flexibility regarding the size, quantity, and geometry of parts for specific applications. Technical data TruPrint 3000 Build volume (cylinder) mm x mm: Ø 300 x H 400 Processable materials: Weldable metals in powder form, such as: stainless steels, tool steels, aluminum, nickel-based, cobalt-chrome, copper, titanium, or precious metal alloys. Build rate cm³/h 5 – 60 Layer thickness μm 20 – 150 Laser source (TRUMPF fiber laser) W 500 Beam diameter μm 100 – 500 O₂ concentration ppm 100 Exposure speed (powder bed) m/s 3 Monitoring – Condition monitoring, performance monitoring. Option: Powder bed monitoring. Preheating (substrate plate) °C 200 Shielding gas – Nitrogen, argon Power supply V / A / Hz 400 – 32 – 50/60 Dimensions (incl. filter) mm 3385 x 1435 x 2225 Weight (incl. filter) kg 4300 Subject to change. The specifications in our quotation and order confirmation are authoritative. Technical data TruPrint 3000 Tab. 3