Used Mikron Wf 3 Sa for sale (192)

Condition: used, Heidenhain Active - Digital Display Stepless feed Lamp Dkjdpfscmzzgjx Afpoh Cooling device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min ISO 40 mounting vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg Dksdpfsrywgzjx Afpeh

Condition: excellent (used), Tool milling machine Manufacturer: Mikron Model: WF 3 DP Three-axis Heidenhain digital readout Tool holder: SK 40 24 spindle speeds: 30 – 2240 rpm Infinitely variable feeds, from 1 – 750 mm/min Table clamping surface: 450 x 800 mm X travel: 500 mm Y travel: 500 mm Z travel (vertical): 400 mm Dkjdpfxjxvr Trs Afpjh Hydraulic tool clamping Space requirements: Width: 1800 mm Depth: 1700 mm Height: 2000 mm (with pallet) Weight: 1800 kg

Condition: excellent (used), MIKRON WF 3 DP universal milling machine Dksdpfolnfggsx Afpjh TECHNICAL DATA Angular table clamping surface: 450 x 800 mm number of T-slots: 9 T-slot distance: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8,7 kW Milling spindle drive spindle speed: 21 steps speed range: 25 - 2500 /min step jump: 1,258 power of spindle motor: 3,3 / 4,0 kW tool holder: ISO 40 / M16 quill movement, vertical: 110 mm Feed drive Feed rates in all 3 axes: Infinitely variable Feed range: 1 - 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Torque at motor longitudinal + transversal: 4 Nm Vertical: 8 Nm Displacement travel Longitudinal movement of the clamping table (X axis): Automatic: 400 mm Transverse movement of the clamping table (Y axis): Automatic: 400 mm Vertical movement of the clamping table (Z axis): Automatic: 385 mm For the correctness, completeness and topicality of the data we do not take over guarantee

Condition: used, Year of construction: 1980, x-travel:500 mm y-travel:500 mm z-travel:400 mm turning speed range:30 - 2240 U/min feeds -stepless-:1 - 750 mm/min rapid traverse:1500 mm/min table surface area:400 x 800 mm tool taper:SK 40 Dkedpfscxxq Dsx Afpjh total power requirement:7,8 kW weight of the machine ca.:1.8 t dimensions of the machine ca.:2,1 x 1,6 x 2,2 m

Condition: used, Year of construction: 1985, x-travel 500 mm y-travel 500 mm z-travel 350 mm table surface area 800 x 450 mm spindle taper: ISO 40 quill stroke mm feed - longitudinal/cross mm/min feeds vertical mm/min turning speed range max. 3150 U/min voltage 380 V / 50 Hz power capacity 4 kW Dkjdpfxjtv Ia Te Afpjh weight of the machine ca. 1,7 t dimensions of the machine ca. 2,5 x 2,3 x 2,0 m • HEIDENHAIN TNC 155 - control, • with electrical hand wheel, • several tool tapers, • new set of bevel gears,

Condition: good (used), Year of construction: 1991, travel distance X-axis: 560 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, spindle speed (min.): 40 rpm, X-travel: 560 mm Y-travel: 500 mm Z-travel: 400 mm Control: TNC 360 Spindle speed: 40-4,000 rpm Dkedjyg Hllspfx Afpjh Total power requirement: 7.5 kW Machine weight approx.: 2.6 t Space requirement approx.: 2.6 x 1.8 x 2.2 m

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300VA -Primary: 3x380V Dkjdpekzpm Hjfx Afpoh -Technical data: see photo identification plate -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Bosch, three-phase transformer from CNC milling machine Mikron WF 51C/155 Dodpfx Aekyy Uqsfpjkh -Type: 100-911637 -Power: 4.5kVA -Primary: 3x380V -Secondary: 3x95/165 V -Dimensions: 335/135/H350 mm -Weight: 41 kg

Condition: good (used), Permanent magnet motor, electric motor, servo motor, geared motor, three-phase motor -Manufacturer: Siemens, Permanent Magnet Motor from CNC milling machine Mikron WF 51C/155 -Type: HU3074-,0AC01-Z -Voltage: 167 V -Power: 1.8 kW -Speed: 2000 rpm -Shaft: Ø 22 x 45 mm Dkedpfx Aokxhpuefpjh -Number: 2x motors available -Price: per piece -Dimensions: 390/140/H185 mm -Weight: 23 kg/pc.

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V Dsdpfx Afewd N S Dopskh -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 -Type: D 1515 S3 -Current: 10A -Dimension: 180/90/H190 mm -Weight: 9.5 kg Dedpfx Aekzpngefpekh

Condition: used, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine No. 440911 Year approx. 1985, overhauled and control retrofit in 11/2000 Travel distances X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Djdow A Af Iepfx Afpjkh Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min; Z = 4000 mm/min Quill stroke 100 mm Main spindle drive 4 and 5 kW Power connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - CNC path control Heidenhain TNC 310, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gear steps - Vertical milling head swivels left and right - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours shown - Control cabinet permanently attached to the machine rear - Coolant system integrated in the machine base - Swiveling operator panel - Electrical diagram, control manual available Space requirement L x W x H 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Condition: used, Year of construction: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Dkjdpfxou U Sabo Afpoh total power requirement 2,6 kW weight of the machine ca. 1,5t t

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Dkedpsxcxz Nefx Afpsh

Condition: used, Year of construction: 1989, machine/vehicle number: 6766, x-travel:560 mm Dedpfocxxpqex Afpekh y-travel:500 mm z-travel:400 mm table-size:900 x 530 mm control:Heidenhain TNC 355 B/Q tool taper:ISO 40 / M 16 turning speed range:40 - 4000 U/min rapid traverse X-axis:6 m/min rapid traverse Y-axis:6 m/min rapid traverse Z-axis:5 m/min feeds x/y/z -stepless:2 - 3000 mm/min total power requirement:9 kW weight of the machine ca.:2,6 t dimensions of the machine ca.:2,6 x 1,8 x 2,2 m

Condition: good (used), Mikron WF 32 CH Universal milling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travels: X 560 mm Y 500 mm Z 400 mm Clamping surface: 530 x 900 mm Dodpfx Aswit Rhofpokh Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 - 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg You can find more items - new and used - in our store! International shipping costs on request!

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] EQUIPMENT - 3 axis display HENDENHAIN Dkjdpjuhbxaefx Afpeh - steel sheet retention

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, type of input current: three-phase, input voltage: 380 V, input current: 20 A, input frequency: 50 Hz, We offer this ready-for-use Mikron WF31D/TNC355 milling machine, year of construction 1989. Vertical and Horizontal machining Phase voltage: 380 V Frequency: 50 Hz Current: 20 A Power: 9 kW Control circuit voltage: 24 V Diagram number: 152.34.80.805 Dkedpfx Afjyhatlspsh If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1987, functionality: limited functionality, machine/vehicle number: 30 09, Mikron WF 31 C, universal CNC milling machine. CNC control: Heidenhain TNC 155. Weight approx. 2300 kg. The machine is currently not connected and is in transport condition, but can be prepared according to customer requirements. Dkodpfx Asygk Nnjfpoh

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested Dkjdpfx Afefbma Nopeh -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: ready for operation (used), Travel X/Y/Z: 500mm/500mm/400mm, table dimensions X/Y: 460mm/800mm, tool holder: SK40, speed: 4000rpm, feed rate: 3m/min, rapid traverse: 5m/min, weight: approx. 2500kg. On-site inspection is possible. Dkodpjx Tul Iofx Afpeh

Year of construction: 1987, condition: good (used), Mikron WF2SA tool milling machine with 3-axis Heidenhain active digital readout. Fixed angle table, SK 40 spindle holder. Ready for operation . Machine ready for demonstration under power by arrangement. Dedpfx Afeqttt Tepskh

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 956.71.80.274, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, input voltage: 400 V, Equipment: documentation/manual, The system shown is in perfect condition and ready for immediate use. No heavy roughing work has ever been performed with this machine. The machine is being sold together with a vise, including a tool cabinet with the shown contents. Additionally, it comes with 2 sets of ground supports and approximately 80 cutters, all in usable condition (some barely used), some as good as new, mostly coated in solid carbide, suitable for machining steel and aluminum. Dkjdpfx Aswnq Sgefpoh

Condition: used, Year of construction: 1991, Milling machine in good condition, fully operational. Connected, can be tested, inspected. Specification: Model: Mikron WF31C Year: 1991 X axis: 500 mm Y axis: 500 mm Z axis: 400 mm Speed: 31,5 - 3150 rpm Contorter: Heidenhain TNC 155 Motor power: 4kW Weight: 2 300 kg Machine dimensions: 2580 x 1800 x 2125 mm Manufactured in: Switzerland Dkodpfx Aoq Hdwusfpeh If you have any further questions, we will be happy to answer them.