Used Mitsubishi Reach Truck for sale (362)

Condition: like new (used), Year of construction: 2018, Usable wire diameters: from 0.1 to 0.3 mm. Machine in like-new condition with very few operating hours, mainly used for prototype production. Nedpfx Ageykrcqe Newc

Condition: used, Year of construction: 2014, operating hours: 45,000 h, Travel: X 600 / Y 400 / Z 310; Water bath machine; Automatic wire threading; Chiller. Nwedpfxjyftr Ao Ag Noc

Condition: used, mileage: 59,000 km, power: 110 kW (149.56 HP), first registration: 03/2015, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 3, loading space length: 5,100 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, central locking, had accident, tail-lift, * Driver airbag * LBW BEAR 1000kg * Steering wheel adjustment Nwsdpfxohwbbhj Ag Njc * 80% tires * Engine brake * Roof spoiler * Payload 3400kg * Automatic transmission has problems!!! * WhatsApp/Tel.

Condition: used, mileage: 1,80,000 km, power: 129 kW (175.39 HP), first registration: 04/2015, fuel type: diesel, overall weight: 7,000 kg, color: orange, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,100 mm, total width: 2,350 mm, total height: 2,700 mm, Equipment: air conditioning, all wheel drive, central locking, For sale here is a well-maintained Mitsubishi Canter 4x4 All-Wheel Drive Meiller 3-Way Tipper, equipped with the globally popular 3.0-liter diesel engine. * The vehicle is in good condition! * TÜV/Emission Inspection (HU/AU) new until 01/2027 * German vehicle * Regularly serviced * Original condition! * One owner * VAT deductible Equipment: * Meiller 3-way tipper * Single cab * 4x4 all-wheel drive * Air conditioning * Tow bar Njdpfxsx Tnkdj Ag Newc * Increased towing capacity: 3.5 tons * 3 seats * Electric exterior mirrors * Central locking * and much more... Technical Data: * Gross vehicle weight: 7,000 kg * Kerb weight: 3,800 kg * Payload: 3,200 kg * Towing capacity: 3,500 kg Why choose us? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transit license plates (5-day/Export registration) usually available on the same day * Pickup service from the airport or train station All vehicles are professionally prepared for sale and hygienically clean! Special features: Disinfection of the interior and ventilation system by ozone cleaning. Two-stage exterior polish * If required, paint correction and smart repair All our vehicles have also undergone thorough maintenance. Of course, this includes fresh fluids, filters and any other necessary work, so you don’t have to worry about a thing. Optionally, we can present the vehicle at an independent inspection center or workshop of your choice. We are pleased to have sparked your interest and are fully available for you around the clock. If you have any questions, comments, or special requests, do not hesitate to contact us! More information as well as insights into our company philosophy available upon request.

Condition: used, mileage: 1,80,000 km, power: 129 kW (175.39 HP), first registration: 04/2015, fuel type: diesel, overall weight: 7,000 kg, color: orange, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,100 mm, total width: 2,350 mm, total height: 2,700 mm, Equipment: air conditioning, all wheel drive, central locking, For sale here is a well-maintained Mitsubishi Canter 4x4 All-Wheel Drive Meiller 3-Way Tipper, equipped with the globally popular 3.0-liter diesel engine. * The vehicle is in good condition! * TÜV/Emission Inspection (HU/AU) new until 01/2027 * German vehicle * Regularly serviced * Original condition! * One owner * VAT deductible Equipment: * Meiller 3-way tipper * Single cab * 4x4 all-wheel drive * Air conditioning * Tow bar * Increased towing capacity: 3.5 tons * 3 seats * Electric exterior mirrors * Central locking * and much more... Technical Data: * Gross vehicle weight: 7,000 kg * Kerb weight: 3,800 kg * Payload: 3,200 kg * Towing capacity: 3,500 kg Why choose us? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair conditions * Transit license plates (5-day/Export registration) usually available on the same day * Pickup service from the airport or train station All vehicles are professionally prepared for sale and hygienically clean! Special features: Disinfection of the interior and ventilation system by ozone cleaning. Two-stage exterior polish * If required, paint correction and smart repair Nsdpfx Asx U N N Dsg Newc All our vehicles have also undergone thorough maintenance. Of course, this includes fresh fluids, filters and any other necessary work, so you don’t have to worry about a thing. Optionally, we can present the vehicle at an independent inspection center or workshop of your choice. We are pleased to have sparked your interest and are fully available for you around the clock. If you have any questions, comments, or special requests, do not hesitate to contact us! More information as well as insights into our company philosophy available upon request.

Condition: ready for operation (used), Year of construction: 2009, Load capacity: 1800kg, drive wheels: single, rated power: 42kW, lift height: 3290mm, load center: 500mm, mast model: 5V15C33, operating hours: approx. 1116h. Documentation available. An on-site inspection is possible. Nwodpfx Agjycwt Ss Noc

Condition: ready for operation (used), Year of construction: 1999, Fuel: diesel, max. speed: 20km/h, max. load: 4000kg, machine dimensions X/Y/Z: approx. 3150mm/1500mm/2300mm, weight: approx. 6200kg, operating hours: approx. 13533h. The handbrake of the must be adjusted. Documentation available. An on-site inspection is possible. Nwjdevft Nqepfx Ag Noc

Year of construction: 1987, condition: ready for operation (used), A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible. Nsdpfx Agsx Hz Shj Njwc

Condition: ready for operation (used), Year of construction: 2019, Lifting capacity: 2000kg, lifting height: 4000mm, fork length: 1220mm, power: 41kW, fuel: gas, machine dimensions X/Y: approx. 2350mm/1000mm, operating hours: 1793h. Including attachment Bolzoni Shifter 5BSS200F, mast model: 5F20C40, tower height: 2500mm. Documentation available. On-site inspection is possible. Nwjdpfev Ip Sgox Ag Noc

Condition: ready for operation (used), Workpiece dimensions X/Y/Z: 1050mm/800mm/295mm, max. workpiece weight: 800kg, table dimensions X/Y: 780mm/630mm, traverse path X/Y/Z: 500mm/350mm/300mm, max. table feed: 1300mm/min, wire diameter range: 0.1mm-0.3mm, max. wire feed: 15m/min, traverse path U/V: +/-32mm, max. taper angle: 15°. Machine dimensions X/Y/Z: approx. 1900mm/2650mm/2100mm, weight: approx. 3500kg. Including generator unit and automatic wire threader AT. Documentation available. On-site inspection is possible. Nedpfx Asvb Hbrog Newc

Condition: ready for operation (used), Year of construction: 2018, overall weight: 2,722 kg, controller manufacturer: MITSUBISHI, controller model: M800, number of axes: 5, This 5-axis Mitsubishi MV1200R was manufactured in 2018 and features advanced capabilities such as X-Axis Travel of 15.7", Y-Axis Travel of 11.8", and Z-Axis Travel of 8.7". It includes a Mitsubishi M800 control, Auto Wire Threading, and a Chiller for enhanced performance. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV1200R machine we have for sale. Contact us for more information about this machine. Additional Equipment • Auto Wire Threading • Chiller • Remote 360 Installed • Round Diamond Guides Included • 1GB Partition • Wire Chopper • Angle Master Advanced Tapering • Angle Master Precision Taper Software • CFAST Compact Flash Card • Chiller Chopper • DNC Hardware Ethernet FTP • FS Power Supply • High Precision Alignment Gauge • Wire Alignment Gauge Included Machine Benefits Nsdpsx D Ryyjfx Ag Nowc Technical machine benefits: • X-Axis Travel: 15.7" • Y-Axis Travel: 11.8" • Z-Axis Travel: 8.7" • U/V Axis Travel: 2.4" x 2.4" • Degree Taper Cutting: 15 @ 8" • Glass Scale Feedback: X, Y, U, V • Workpiece • Precision: .000002" • Table • Inside Tank Dimensions: 31.9" x 27.6"

Condition: used, capacity in kVA 53,5 kVA input voltage 480 V output voltage / V Nodpjwth Ucjfx Ag Newc length 800 mm width 600 mm height 530 mm weight 260 kg MITSUBISHI Dry type transformer 3PH 53.5 kVA TR-YU Condition: used functional

Condition: used, input current: 243 A, Mitsubishi frequency converters - Nwodevwmuqepfx Ag Nec Mitsubishi A500, FR-A540L-132K-E1, 135kW, 243A, C4C9186-H04 Mitsubishi A500, FR-A540L-132K-E1, 135kW, 243A, C4C9186-H04 Mitsubishi A500, FR-A540L-132K-E1, 135kW, 243A, S/N IVC815SSA101 Mitsubishi F700, FR-AF740-03610-EC, F41R43, 132kW, 232A

Condition: used, Year of construction: 2007, Wire EDM machine MITSUBISHI FA20S, No. 07F2A056, year of manufacture 2007, working area 500 x 350 x 300 mm Nodpjyhql Esfx Ag Njwc

Condition: used, mileage: 32,040 km, power: 129 kW (175.39 HP), first registration: 04/2021, fuel type: diesel, fuel: diesel, color: white, driver cabin: other, gearing type: automatic, emission class: none, suspension: other, number of seats: 3, Equipment: air conditioning, central locking, trailer coupling, * Three-way tipper * One owner Nedpfx Ajwu Hdlsg Nswc * Air conditioning * Tow bar * Automatic * 3-seater ... VISIT US – HERE YOU WILL FIND THE COMPLETE STOCK AND ALL PHOTOS. PLEASE ARRANGE AN APPOINTMENT! ALL BRANDS AND MODELS / CUSTOM CONFIGURATIONS POSSIBLE, FINANCING AT SPECIAL CONDITIONS, Trade-in possible, Some images for illustration purposes only, Subject to prior sale and errors, We Speak English / Hablamos Español, Türkçe konuşuyoruz

Condition: good (used), functionality: fully functional, Year of construction: 2007, lifting capacity 3000 kg lifting height 5500 mm overall height 2500 mm frame width 1200 mm mast type: Triplex forks 1800 mm side shift free lift Njdpoyc Edfjfx Ag Newc electric drive year of manufacture: 2007

Condition: ready for operation (used), Year of construction: 2022, This 6-axis Mitsubishi RV-7FRLM-D robot arm was manufactured in 2011. It features a vertical multiple-joint structure, capable of handling a maximum load of 7 kg with a reach radius of 908 mm. The robot is equipped with an AC servo motor and can be installed on floors, ceilings, or walls. It operates efficiently with a cycle time of 0.35 seconds and has an IP67 protection degree. Consider the opportunity to buy this Mitsubishi RV-7FRLM-D robot arm. Contact us for more information. • Structure: Vertical multiple-joint type • Environmental Specifications: Oil mist • Protection Degree: IP67 • Installation: Floor / Ceiling / Wall-mounted • Degrees of Freedom: 6 • Drive System: AC servo motor (all axes with brake) • Position Detection: Absolute encoder • Load Capacity Maximum: 7 kg/ Rated: 7 kg • Upper Arm: 435 mm • Forearm: 470 mm • Maximum Reach Radius: 908 mm • J1: −240° to +240° • J2: −110° to +130° • J3: 0° to +162° • J4: −200° to +200° • J5: −120° to +120° • J6: −360° to +360° • J1: 288 deg/sec • J2: 321 deg/sec • J3: 360 deg/sec • J4: 337 deg/sec • J5: 450 deg/sec • J6: 720 deg/sec • Maximum Composite Speed: 11000 mm/sec • Cycle Time: 0.35 sec • Position Repeatability: ±0.02 mm • Environmental Conditions Ambient Temperature: 0–40°C /Robot Mass: 67 kg • Allowable Torque Nedpsx Enknsfx Ag Njwc • J4: 16.2 Nm • J5: 16.2 Nm • J6: 6.86 NmAllowable Inertia • J4: 0.45 kg·m² • J5: 0.45 kg·m² • J6: 0.10 kg·m² • Tool Interfaces Tool Wiring: • 8 inputs / 8 outputs for gripper • Multi-function gripper & sensor signal cable • LAN × 1 (100BASE-TX)Tool Pneumatic Pipes: • Primary: Ø6 × 2 • Secondary: Ø4 × 8Controller Connected Controller Type: CR800-07VD /Control Type: Standalone

Condition: used, mileage: 8 km, power: 110 kW (149.56 HP), first registration: 02/2026, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 02/2028, color: orange, gearing type: mechanical, number of seats: 3, loading space length: 3,780 mm, loading space width: 2,100 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Internal vehicle number: 153374 Location: OsnaTruck Nutzfahrzeugservice GmbH in Osnabrück (ZIP code 49076), Prof.-Porsche-Str. 7 * Tel.: Exterior * Towbar / Towing capacity 3,500 kg * Heated exterior mirrors Interior * Driver's comfort air-suspension seat, horizontal suspension * Automatic climate control Safety * Driver airbag Comfort and Environment * Reverse warning system Multimedia * Radio with Bluetooth and hands-free function Other * 3-year manufacturer warranty from first registration, up to 100,000 km * AdBlue tank cover * Complete set of all-season tyres * Trailer socket with wiring kit * Battery cover, double * Batteries, 2 x 12 V/100 Ah, maintenance-free * Euro 6 Step E * LED front headlights * Hire purchase/financing or leasing possible through Daimler Truck Financial Services Deutschland (DTFSD). We would be happy to provide you with an offer. * Dropside body: 3,780 mm x 2,100 mm x 400 mm * Fuso safety package incl. floor mats * Special paint finish "valencia orange" * Mirror brackets, medium length * Valve extensions Nwodpfx Asyhuxcog Nec * Preparation for battery cut-off relay 12V * Toolbox mounted on the side underneath * Limited-slip differential lock Miscellaneous: * Nationwide delivery for €299 net plus VAT (€355.81 incl. VAT) * For all vans: Optional 12 or 24 months Mercedes-Benz used vehicle warranty available on request. * We are happy to trade in your current vehicle, offset it against the price of the new vehicle, or pay you the purchase amount. * Leasing / financing via Mercedes-Benz Bank. We would be happy to provide you with an offer. * No liability for misprints & typographical errors * Subject to prior sale and errors.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, mitsubishi EA8 cnc zinc spark machine year of construction 2010 c-axis 4-fold changer x,y,z 300 x 250 x 250 mm generator 60 A Njdpfx Agsyh E N As Nowc max. workpiece weight 550 kg max. electrode weight 25 kg chiller hirschmann mount fire extinguishing system magnet on the table documentation and diskettes machine is connected for inspection

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,200 h, load capacity: 2,500 kg, lifting height: 135 mm, fuel type: electric, construction height: 1,200 mm, fork length: 2,400 mm, drive type: Elektro, Low-level order picker Load center of gravity: 600 Technical condition: good Njdpfx Ajwdz Dleg Newc Battery voltage: 24V Battery Ah: 500Ah Battery type: PzS Description: Find your forklift at STA-TECH! Whether pallet trucks, electric, diesel, or LPG forklifts – we offer affordable, ready-to-use models and new forklifts. STA-TECH is your partner for: • Purchase and rental of forklifts and warehouse equipment • Purchase of used equipment and logistics • Cross-manufacturer service: repairs, maintenance, inspections Load protection grids,

Condition: used, functionality: fully functional, machine/vehicle number: SFB310, Year of construction: 2022, operating hours: 1,420 h, load capacity: 5,000 kg, lifting height: 5,550 mm, free lift: 1,793 mm, fuel type: electric, mast type: triplex, construction height: 2,670 mm, fork length: 1,200 mm, empty load weight: 7,991 kg, total length: 4,025 mm, drive type: Elektro, construction width: 1,450 mm, Electric 4-wheel forklift truck Chassis number: SFB310 Load center: 500 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Technical condition: very good Front tires type: Superelastik Rear tires type: Superelastic Battery Volt: 80V Njdpfx Aelrq H Rog Nswc Battery Ah: 775Ah Battery manufacturer: Frabat Battery year of construction: 2022 Battery condition: 80 - 100% Description: Find the right used forklift truck for you now! STA-TECH offers you a large selection of used equipment. Regardless of whether you need a pallet truck, electric, diesel or LPG forklift - with our extensive range of inexpensive, ready-to-run used forklifts to new forklifts, we offer you a suitable solution! Here you can find more used forklifts from our stock: sta-tech/used-forklifts STA-TECH is your partner for: ● Purchase and rental of new and used forklift trucks and warehouse technology ● Purchase of used equipment and uncomplicated logistics ● Comprehensive, manufacturer-independent service - from repair and maintenance to testing 3rd valve, 4th valve, rear work lights, front work lights, full cab, air conditioning, scales,

Condition: used, mileage: 1,16,735 km, power: 92 kW (125.09 HP), first registration: 09/2007, fuel type: diesel, overall weight: 6,990 kg, color: blue, gearing type: mechanical, emission class: euro4, number of seats: 3, total length: 5,050 mm, total width: 1,900 mm, total height: 2,750 mm, Year of construction: 2007, Equipment: ABS, air conditioning, all wheel drive, crane, Pfau Rexter A6500 4x4 Long Wheelbase 3.0L Diesel Engine 92kW/125HP Euro 4 with Tipper, Air Conditioning, and HIAB 035-2 Loading Crane – Immediately Ready for Operation! First Registration: 09/2007 Mileage: 116,735 km Nsdpfxoygbwij Ag Nswc Number of Previous Owners: 1 (First owner: Free State of Saxony) — Mitsubishi 3.0L Engine, 92kW/125HP — HIAB 035-2 loading crane with grapple hydraulics — 5-speed manual transmission — Permissible gross weight: 6,990 kg — Digital tachograph — Pioneer radio with CD player — Air conditioning — Driver's side airbag — Electrically adjustable and heated exterior mirrors — Electric windows — Three-way tipper with galvanized side extensions, rear drop-down & swing tailgate — Tow bar with ball hitch – towing capacity 3,500 kg — Tow bar with jaw-type coupling – towing capacity 3,500 kg — Selectable all-wheel drive with mechanical rear axle differential lock and low-range gearing — Driver's seat and double passenger bench seat — Off-road tires 255/100R16C on split rim wheels — Cargo bed dimensions: 2.53m x 1.55m Immediately drivable and operational vehicle from first owner, tidy and well-maintained condition! Previously used by the state dam authority; therefore, no winter service use – no rust! New TÜV inspection/emissions, battery, and service at delivery! Matching clamshell bucket available at extra cost! Subject to errors and changes!

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, number of axes: 5, This 5-axis Mitsubishi MV2400 S wire EDM machine was manufactured in 2016. It features a 600 mm X-axis travel, 400 mm Y-axis travel, and 310 mm Z-axis travel. Capable of handling workpieces up to 1500 kg, it offers dimensions up to 1050 mm in length and 820 mm in width. Consider the opportunity to buy this Mitsubishi MV2400 S wire EDM machine. Contact us for more information. • Maximum workpiece length: 1050 mm Nodpfxjx Urafo Ag Newc • Maximum workpiece width: 820 mm • Maximum workpiece height: 305 mm • Maximum workpiece weight: 1500 kg

Condition: ready for operation (used), Year of construction: 2013, load capacity: 13 kg, controller manufacturer: MITSUBISHI, number of axes: 6, This 6-axis Mitsubishi RV-13FLM D1 S15 robot arm was manufactured in 2013, featuring a comprehensive operating range with base rotation of ±240° and wrist roll of ±360°. It's equipped with powerful motors, including 1500 W for both the base and shoulder. If you are looking to get high quality robotic arm capabilities consider the Mitsubishi RV-13FLM D1 S15 machine we have for sale. Contact us for more information. Axis Operating Range: • J1 (Base Rotation): ±240° (Total 480°) • J2 (Shoulder): -150° to +90° (Total 240°) • J3 (Elbow): -72.5° to +95° (Total 167.5°) • J4 (Wrist Yaw): ±200° (Total 400°) • J5 (Wrist Pitch): ±120° (Total 240°) • J6 (Wrist Roll): ±360° (Total 720°)Axis Power: • J1 (Base): 1500 W • J2 (Shoulder): 1500 W • J3 (Elbow): 750 W • J4 (Wrist Yaw): 400 W • J5 (Wrist Pitch): 200 W • J6 (Wrist Roll): 100 W Nedpfsx D H Nkjx Ag Njwc

Condition: used, mileage: 93,710 km, power: 107 kW (145.48 HP), first registration: 12/2009, fuel type: diesel, empty load weight: 3,700 kg, maximum load weight: 3,790 kg, overall weight: 7,490 kg, tire size: 205/75R17.5, axle configuration: 4x2, wheelbase: 3,300 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,300 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, cabin, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, license plate house, double bench seat, rear window, heated mirrors, electric window left, electric window right, air conditioning, switch 6, ABS (anti-lock braking system), storage box, leaf suspension, AHK ball head, noise protection G1, lashing eyes, U-protection, pendulum flaps, environmental badge green Wheelbase: 3300 mm Body: Meiller 3-sided tipper body The vehicle is currently approved for 7500 kg but can be reduced in weight at any time! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Nodpfx Agsvhif Hj Nswc