Used bench drills with a drilling capacity over 17mm for sale (56)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 570x870x1710 mm Dodpev A Hhbsfx Addola Weight 143 kg Total power requirement 1,1 kw

Condition: as good as new (ex-display), Year of construction: 2019, Optimum Optidrill DX17E – Fully functional drill press with minor signs of use, previously used as a demonstration model. Optimal power transmission through aluminum belt pulleys Emergency stop button Drill spindle with precision ball bearings Guaranteed concentricity accuracy less than 0.03 mm measured at the drill spindle High-contrast digital LCD speed display integrated into the housing, speed control via potentiometer Dirt- and water-resistant, easy-to-clean membrane keypad Dlodpfx Adsx Dzvledsa Glare-free LED lighting integrated on left and right sides of the drill head, eliminating disruptive shadows Height-adjustable chuck guard with micro-switch for maximum safety Precisely machined worktable with parallel T-slots, surface ground for precision Swiveling worktable Heavy-duty base plate with parallel T-slots Dimensions and weights Column diameter: 60 mm Length approx.: 425 mm Width/depth approx.: 481 mm Height approx.: 910 mm Weight approx.: 73 kg Drilling capacity Drilling capacity (steel S235JR): 16 mm Continuous drilling capacity (steel S235JR): 13 mm Worktable Working area length: 290 mm Working area width: 290 mm T-slot size: 10 mm Number of T-slots: 2 T-slot spacing: 100 mm Rotation: 360 ° Distance chuck – table min.: 98 mm Distance chuck – table max.: 315 mm Speed range Speed range: 50–4000 rpm Speed control: electronic Electrical data Output power (motor): 1.0 kW Connection voltage: 230 V Network frequency: 50 Hz Base Max. distance chuck – base: 385 mm Working area length: 290 mm Working area width: 280 mm T-slot size: 14 mm Number of T-slots: 2 T-slot spacing: 100 mm Type of generated data: Usage data Data format: — Data size: Up to 5 MB Continuous real-time data generation: Yes Data storage location: On device Data access: Via physical interfaces Spindle Quill stroke: 60 mm Spindle taper: MT 2 Throat depth: 235 mm

Condition: new, The TSB 35 is a robust and precise column drilling machine that stands out in the category of column drilling machines. Designed by KNUTH, this bench drill series is compact yet delivers high drilling performance suitable for a wide variety of applications, from steel construction to repair shops. The TSB 35 features a powerful spindle gearbox for high torque and an extensive speed range with 12 adjustable levels, allowing for a drilling capacity of up to 35 mm. The machine is built with a rigid cast-iron construction, ensuring stability during operation. Additionally, the drill head can swivel ± 45°, enabling angled drilling, while the automatic quill feed simplifies the process for larger drilling diameters. Equipped with standard features like a protective shield, LED work lamp, and a coolant system, this machine is a valuable asset for any workshop. To enhance your workshop’s capabilities with the TSB 35 column drilling machine, request a quote today. Dsdjqa Avfspfx Addela

Condition: used, total height: 1,600 mm, total length: 1,250 mm, total width: 800 mm, Empty weight: 150 kg Tapping machine, drilling and tapping - Documentation available: No - CE certificate present: No - Serial number: 132832 - Motor power: 0.6kW - Spindle speed max.: 1600rpm Dledpfx Adswywwyodsa - Model: omboormachine - Table width: 225mm - Table length: 290mm - Spindle speed min.: 320rpm - Transport dimensions: 1250mm x 800mm x 1600mm (l x w x h) - Transport weight [kg]: 150kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), bore capacity in steel (diameter) 25,0/30,0 mm throat 260 mm bore stroke 120 mm number of spindle speeds 80-1400 min-1 table surface area 410 x 390 mm Dsdpfx Adouhhzhedela total power requirement 0,8/1,5 kW weight of the machine ca. 250 kg dimensions of the machine ca. 0,75 x 0,6 x 1,15 m

Condition: good (used), Year of construction: 1992, Ref. -No.: 10582 Manufacturer: SCHARMANN Type: FB 75 Opticut Year of construction: 1992 Type of control: CNC Control: Heidenhain 426 Storage location: Halberstadt Country of origin: Germany Machine-No.: 141XXXX X-Travel: 850 mm Y-Travel: 1000 mm Z-Travel: 700 mm Tool Taper: SK 40 Turning Speeds: 15 - 1250 RPM spindle quill: 75 mm Dedpfx Ajxxpcceddela

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 830x320x1660 mm Djdpsv A Hg Rsfx Addsla Weight 56 kg Total power requirement 0,9 kw

Condition: new, Year of construction: 2025, For delivery times and current prices, please contact us directly. Industrial motor Quiet-running spindle thanks to new spindle design Machine operation with safety electrics in 24 V DC voltage Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle Dlsdpfxsq T Ruhs Addsa Clockwise/anticlockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water-resistant membrane keypad Speed display Separate emergency stop switch Thread cutting function Precisely machined, sturdy drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated through 360 Digital depth gauge LED machine light integrated in the drill head V-belt cover with safety switch Thick-walled steel column for high force absorption and stability Massive, large base plate with T-slots Heavy-duty design of the entire machine

Condition: new, The TSB 25 is a versatile Column Drilling Machine that offers impressive performance and compact dimensions, making it an ideal choice for any workshop, whether in steel construction or repair. As part of the KNUTH TSB bench drill series, this machine features a robust main spindle gearbox that provides high torque along with a wide speed range, accommodating various drilling tasks with ease. With a drilling capacity of 25 mm, a throat of 240 mm, and a spindle speed range of 125 to 2825 rpm, the TSB 25 is designed for efficiency. The swivel drill head allows for angled drilling, while the height-adjustable machine head ensures optimal usability. Additionally, standard equipment includes a base, protective shield, LED work lamp, and drill chuck, which enhance safety and convenience during operation. For those looking for a reliable and powerful Column Drilling Machine, the TSB 25 is an excellent choice. Request a quote today to learn more about this robust addition to your workshop. Dledoqa Au Tjpfx Addea

Condition: used, total height: 1,900 mm, total length: 900 mm, total width: 800 mm, Empty weight: 500 kg - Documentation available: Yes - CE certificate present: No - Serial number: 120281 - Control: Conventional - Motor power: 1.5kW - Drilling depth: 160mm - Spindle speed max.: 1400rpm - Tool holder: MK3 - Table width: 460mm - Table length: 620mm - Spindle diameter: 20mm - Travel Z: 500mm - Number of axes: 1 - Spindle speed min.: 80rpm Dljdpfxexz Egvo Addja - Transport dimensions: 900mm x 800mm x 1900mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Table Drilling and Thread Cutting Machine IXION Type BT 15 GL Machine no.: Year of manufacture approx. 1975 Drilling capacity: 15 mm Spindle mount: Taper B 16 Thread cutting range: M 2.5 to M10 Djdjwk Nxqspfx Addjla Throat depth: 200 mm Quill stroke: 90 mm Table size: 285 x 220 mm Column diameter: Ø 75 mm Spindle speed: 320–1600 rpm, 4 steps Motor power: 0.55 kW Power connection: 380 Volt, 50 Hz - Spindle speed adjustable in 4 belt stages - Equipped with FAHRION GH 10 tapping attachment - With thread pitch guide bush, operation without guide bush also possible - Drill head height adjustment via hand crank - Column lowers from table plate for drill head height adjustment Required space (L x W x H): 650 x 420 x 900 mm Weight: 86 kg Good condition

Condition: used, Year of construction: 1975, Technical details: bore capacity in steel (diameter): 32 mm throat: 230 mm bore stroke: 160 mm spindle taper MT: 3 feed - manual: Handhebel mm revolution per minute: 100...2000 U/min headstock adjustment: 180° Grad headstock traverse: in Höhe/height/altura 350 mm clamping surface area: 1020x615 mm height over floor: 860 mm column diameter: 102 mm total power requirement: ca. 1,2 kW weight of the machine ca.: 0,5 t space requirements approx. LxWxH: L:1,2xB:0,77xH:2,26 m Dsdpfovc Aytsx Addsla equipped: - toothed drill chuck up to 16mm Machine on sale as is, without test run. i.D. *

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm voltage 400 V total power requirement 1.10 kW weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation Dlodpfexaa Thjx Addoa - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: good (used), Stock number: 3034 Manufacturer: MAXION Year of manufacture: Machine number: 146 305 Type / Model: BT25 Drilling capacity: 30 mm Tapping capacity: M25 Spindle taper: MK 2 Speed range: 120 to 2,160 rpm Dlsdpfx Adoxvhd Tjdea Throat: 230 mm Height adjustment: 300 mm Table: 800 x 800 mm Clamping surface: 300 x 330 mm Stroke: 120 mm Distance table-spindle nose: 120 to 440 mm Height adjustment: 320 mm Total power: 1.3 kW Accessories/Equipment: height-adjustable, belt adjustment Condition: good Footprint: 800 x 800 mm Weight: 260 kg Dimensions: 800 x 950 x 1,700 (2,020) mm

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, rotational speed (max.): 1,250 rpm, travel distance X-axis: 850 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, controller model: Heidenhain TNC 355, TECHNICAL DETAILS X-travel: 850 mm Y-travel: 1,000 mm Z-travel: 700 mm Tool holder: SK 40 Dlodsxn I U Nopfx Addsa Speed: 15 - 1,250 rpm Spindle quill: 75 mm MACHINE DETAILS Control: Heidenhain TNC 355

Condition: new, Motor ----- 750W - 230V - 1Phase Drilling capacity ----- 20 mm Pin stroke ----- 82 mm Spindle mounting ----- MK2 Variable speed Spindle speed ----- 400 ~ 2000 rpm Work table ----- 305 x 305 mm Foot ----- 460 x 280 mm Column diameter ----- 72 mm Overall height ----- 990 mm Weight ----- 61 kg Packaging ----- 820 x 500 x 290 mm INCLUDED * Digital depth stop * Digital spindle display * CE cover * Laser device Dledpfx Adoga T E Uedea * LED illumination * CE emergency stop * Drill head with MK2 adaption * Driven wedge

Condition: excellent (used), Drilling capacity -18 mm Spindle taper FEHLMANN Spindle speeds 135-4500 rpm Throat 225 mm Cross table 530 x 255 mm Digital read-out Accessories Dlsdpfjlyrcmex Addja MARCELS MASCHINEN CH

Condition: new, ALZMETALL Alzstar 18-T/S, Manufacturer. Alzmetall Type: Alzstar 18-T/S Condition: New Drilling capacity in St 60: 18 mm, Thread cutting in St 60: M 12, Thread cutting in GG 20: M 14, Short spindle: MK 2, Spindle speed: 225-4,300 rpm, Spindle stroke: 80 mm, Throw: 190 mm, Column diameter: 65 mm, Machine table - usable support: 300x240 mm, T-slots number - width - distance: 2 x 12 x 80 mm, Distance spindle-machine table min./max.: 75/357 mm, Machine base plate usable support: 300x240 mm, Dsdpfsxd Trrox Addsla T-slots number - width - distance: 2 x 12 x 80 mm, Distance Spindle base plate min./max.: 437/437 mm, Feed by hand, Machine table height adjustment: hand crank, Total power requirement: 0.37/0.55 kW, Machine height: 840 mm, Weight: 110 kg Standard equipment: Main switch with motor protection switch, lockable Reversing switch for clockwise and counterclockwise rotation Infinitely variable speed adjustment Protection class IP 54 Mushroom push button (latching) for EMERGENCY STOP Spindle protection with electrical protection Optional: - LED machine light - Under table - Drill chuck 1-13 or 3-16 Available now. For self-collection. Forklift available. Shipping also possible Subject to errors, changes and prior sale. Other Alzmetall table drilling machines and pillar drilling machines always in stock!

Condition: new, Continuous drilling capacity in E 335: 18 mm Normal drilling capacity: 20 mm Tapping capacity: M 12 Spindle: MK 2 Drilling depth: 100 mm throat depth: 225 mm Speed range A: 100 - 2,000 min-1 Speed range B: 200 - 4,000 min-1 Spindle/table distance: 60 to 440 mm Table surface: 345 x 372 mm Column diameter: 90 mm Total height: 955 mm Weight: 110 kg Frequency-controlled three-phase motor: 1.5 kW Dedpfxscw H Syo Addela Powerful, precise universal drill with a wide range of applications. Table/height adjustment via gear rack and worm gear. Three-phase motor, reversing switch right/left rotation, digital speed display, speed adjustment via potentiometer. UNIMAX 2 T with height adjustment from the front. Mains connection 230 V.

Condition: used, Year of construction: 2014, throat 180 mm quill stroke 80 mm continious capacity 20 spindle taper MK 2 Dledpfxexbtrgs Addea table-size 280 x 245 mm height of the machine ca. 1000 m column diameter 73 mm distance spindle /table max. 425 mm dimensions ca. 615 x 330 x 1015 mm weight ca. 60 kg incl. vice HM Müller HT100P

Condition: new, Motor ----- 750W - 230V - 1Phase Drilling capacity ----- 20 mm Pole stroke ----- 85 mm Spindle attachment ----- MK2 Number of speeds ----- 16 Spindle speed ----- 220-2840 rpm Work table ----- 305 x 305 mm Foot ----- 460 x 280 mm Column diameter ----- 72 mm Overall height ----- 990 mm Weight ----- 60 kg Dledpfxsk Iuqye Addja Packing ----- 820 x 500 x 290 mm INCLUDING * Digital depth stop * CE hood * Laser device * LED illumination * CE emergency stop * Drill head with MK2 adaptor * Drive key

Condition: excellent (used), Working travels 450 x 260 x 560 mm Spindle stroke 120 mm cross table 770 x 320 mm Drilling capacity 25 mm Spindle speeds 55 - 9200 Rpm With DRO Dljdpfxetpgcns Addea With Threading attachement Misc accessories MARCELS MASCHINEN CH

Condition: new, Precise, smooth-rolling standard drill, high accuracy and quality. Drill table adjustable rack and the swiveling column. Full motor protection, star-shaped knob. Mains connection 230 V. Dauerbohrleistung in St 60: 15 mm Standard ALB ear power: 18 mm Infinitely variable spindle speeds: 200 - 4,000 min-1 Spindle: MK 2 Drilling depth: 80 mm Projection: 180 mm Distance from spindle/table top: up to 380 mm Tabletop: 250 x 220 mm Column diameter: 65 mm Total height: 910 mm Weight: 80 kg Three-phase motor frequency controlled: 1,1 kW Dledpfxjda Nqxe Addsa Facilities: -Turn switch clockwise / counterclockwise to thread cutting - full motor protection -Star handle in stock, available now

Condition: excellent (used), Drilling capacity -20 mm Spindle taper FEHLMANN Spindle speeds 50-6300 rpm Throat 276 mm Cross table 530 x 255 mm Dljdpsuy Sazsfx Addoa Digital read-out Accessories MARCELS MASCHINEN CH

Condition: new, Continuous drilling capacity in St 60: 15 mm Normal drilling capacity: 18 mm Tapping capacity: M 8 spindle: MK 2 drilling depth: 80 mm throat depth: 180 mm spindle speeds infinitely variable 200 - 4,000 rpm spindle speeds for threads 200 - 700 rpm distance spindle/table: up to 380 mm table surface: 250 x 220 mm Dlsdpfx Adeb Eldnsdsa column diameter: 65 mm total height: 910 mm weight: 80 kg three-phase motor frequency controlled: 1,1 kW with full threading device and programmable digital display machine in stock and immediately available