Used Multistage Centrifugal Pump for sale (8,657)

Condition: good (used), Item: DB-1310-APV-Pump W50/25STD Centrifugal pump Guodpfxetrlrnj Aa Sja Type: W50/25STD V 380-420, Hz 50, min-1 2860, kW 7.5, A 14.7, cos 0,90 V 660-690 Y, Hz 50, min-1 2860, Kw 7.5, A 6.5, cos 0,90 V 440-480, Hx 60, min-1 3435, kW 8.6, cos 0,92

Condition: excellent (used), Pressure centrifugal pump Vertical centrifugal pump Grundfos CR 90-3 A-F-A-E-EUBE more piece Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301) Rated flow 90 m³/h Rated head 65.5 m Max pressure at stated temp 16 bar / 120 °C Type of connection DIN Size of inlet connection DN 100 Pumped liquid Water Liquid temperature range 0 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type SIEMENS Rated power - P2 22 kW Guodpehy Nx Eofx Aa Sja 2940 rpm Mains frequency 50 Hz Rated voltage 3 x 380-415D/660-690Y V Rated current 41,5-39,5/24,0-23,5 A Cos phi - power factor 0.86 Rated speed 2945 rpm Number of poles 2 Enclosure class (IEC 34-5) IP55

Year of construction: 2011, condition: excellent (used), centrifugal single-stage vertical cantilever pump FIP ALFA V2CH 50-33 Gujdsh Rwafopfx Aa Ssa construction of year:2011 DN:50 Nominal flow 40 m³/h Nominal head 29 m p [bar]: 16 T [°C]: -25 ÷ + 140 RPM: 1450 electrical power 11KW 400V 50Hz engine speed: 1450

Year of construction: 2008, condition: excellent (used), centrifugal vertical cantilever pump chemcial pump FIP ALFA 65-40 V2CM construction of year:2008 DN:50 Nominal flow 40 m³/h Nominal head:45 m p [bar]: 16 T [°C]: -25 ÷ + 140 RPM: 1470 electrical power 16,5KW Guodpfx Aaoh Rwbre Sea 400V 50Hz 34,7 A engine speed: 1470 Execution: vertical, radially split volute casing pumps sump pump or channel impeller Applications: handling of paint, aggressive and process liquids, even with the presence of solid particles in suspension, in chemicals and petrochemicals industries length: 1700mm width: 700mm weight:450 kg

Condition: excellent (used), functionality: fully functional, volume flow: 163 m³/h, input frequency: 50 Hz, NB 80-160/147-127 A-F2-A-E-BAQE Gedperp Ef Eofx Aa Soua Non-self-priming, single-stage centrifugal spiral pump Pumped liquid: water Liquid temperature range: 0 .. 120 °C Density: 998.2 kg/m³ Technical: Speed: 2940 rpm Nominal volume flow: 163 m³/h Nominal head height: 17.1 m Actual diameter of the impeller: 147-127 mm Nominal diameter of the impeller: 160 mm Primary shaft seal: BAQE Maximum ambient temperature: 60 °C Maximum operating pressure: 16 bar Flange standard: EN 1092-2 Pump inlet: DN 100 Pump outlet: DN 80 Pressure limit: PN 16 Nominal power 11 kW Mains frequency: 50 Hz Nominal voltage: 380V 3 phases Nominal current: 20.6 weight: 162 kg ​

Condition: used, Year of construction: 2008, functionality: fully functional, volume flow: 40 m³/h, centrifugal vertical cantilever pump chemical pump FIP ALPHA 65-40 V2CM year of construction: 2008 DN: 50 Nominal flow rate 40 m³/h Nominal head: 45 m p [track]: 16 T [°C]: -25 ÷ + 140 Turn number: 1470 electrical power 16.5KW 400V 50Hz 34.7A engine speed: 1470 Implementation: vertical, radially split scroll casing pumps sump pump or channel impeller Applications: treatment of paints, aggressive and technological fluids, even in the presence of solid particles, in the chemical and petrochemical industries length: 1700mm width: 700mm Gjdpfx Aaoufhzpj Ssua weight: 450 kg

Year of construction: 2007, condition: excellent (used), vertical, centrifugal pump Guedpfxeh T Dwfs Aa Sea vertical centrifugal pump 30m3/h chemical pump FIP ALPHA VCM 50-33 Year of construction: 2007 DN: 50 Nominal flow rate 30 m³/h Nominal head 25 m p [track]: 16 T [°C]: -25 ÷ + 140 RPM: 1450 electrical power 11KW 400V 50Hz engine speed: 1450 length: 1550 mm width: 550 mm Implementation: vertical, radially split scroll casing pumps sump pump or channel impeller Applications: treatment of paints, aggressive and technological fluids, even in the presence of solid particles, in the chemical and petrochemical industries If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: good (used), volume flow: 85 m³/h, power: 11 kW (14.96 HP), input frequency: 50 Hz, type of input current: three-phase, Grundfos TPD pumps are single-stage, tightly connected in-line centrifugal two-head pumps, with mechanical shaft seal and primarily for applications such as heating / cooling / district power. Type: TPD 80-330 / 2 A-F-A-BAQE Technical pump speed: 2930 rpm Nominal flow: 85.6 m³ / h Nominal lifting height: 25.9 m Maximum lifting height: 33 m Actual impeller diameter: 157 mm Materials Pump housing: Cast iron Impeller: Cast iron Godpfx Aog I Utpea Seua Material code: A Installation Ambient temperature range: -30 .. 60 ° C Maximum operating pressure: 16 bar Max. Pressure at the specified temperature: 16 bar / 140 ° C Connection size: DN 80 Pressure value for connection: PN 16 Port-to-port length: 440 mm Flange size for motor: FF300 Pump Transported liquid temperature range: 0 .. 120 ° C Density: 998.2 kg / m³ Electrical data Engine: Rated power - P2: 11 kW Mains frequency: 50 Hz Rated voltage: 3 x 380-415D / 660-690Y V Rated current: 12.0-11.8 A Starting current: 660-780% Rated speed: 2930 rpm Number of poles: 2 Housing classification (IEC 34-5): 55 Powder / Spray Insulation class (IEC 85): F Motor protection PTC Net weight: 303 kg Gross weight: 328 kg Purchase and purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), Manufacturer: Grundfos Type: NB80-250/220 A-F-A-BAQE Speed for pump data: 2940 rpm Rated flow: 73.1 m³/h Rated head: 57.6 m Actual impeller diameter: 222 mm Impeller nom: 250 mm Maximum ambient temperature: 60 °C Maximum operating pressure: 16 bar Flange standard: EN 1092-2 Pump inlet: DN 65 Pump outlet: DN 50 Gsdpjncd A Njfx Aa Ssua Pressure rating: PN 16 Net weight: 191 kg Gross weight: 216 kg

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN Guodpfxeyug R Rs Aa Sja flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Year of construction: 2010, condition: used, For sale is a used vertical centrifugal pump from Emile Egger Pumpe & Co. AG from the year 2010. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V4 LB3B-2 Number: T 200708 Year of construction: 2010 L/s: 2,77 1/min: 1800 m: 14,7 Connections: DN50 and DN65 length: 182cm Gusdpegbflujfx Aa Sea quantity: 1 Motor data: Manufacturer: VEM motors GmbH Type: K21R 132 S 4T FDS TPM140 /0543 Number: 0883082001004H kW: 5,5 V: 400 / 690 A: 11,8 / 6,85 rpm: 1425 For further data see type plate

Year of construction: 2010, condition: used, For sale is a used vertical centrifugal pump from Emile Egger Pumpe & Co. AG from the year 2010. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V2 LB3B-2 Number: T 202000 Year of manufacture: 2010 L/s: 2,77 1/min: 2390 m: 26,5 Connections: DN50 and DN65 length: 192cm Quantity: 1 Motor: Manufacturer: VEM motors GmbH Year of construction: 07/2010 Type: K21R 160M 2 FD TWS HW Number: 178086/0001 H kW: 11 HP: 15 Guodpfx Asgbflmea Soa V: 400 A: 20 1/min: 2900 For further data see type plate

Condition: new, Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical centrifugal pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multistage centrifugal pump with opposing suction and discharge connections (inline design). The pump components in contact with the medium are made of high-quality stainless steel. The cartridge seal promises high reliability and ease of servicing. Power is transmitted via a rigid, split coupling. The pipe connection is made via combined DIN flanges. Guedpfxswbfigs Aa Sja The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer Product Group: Vertical Centrifugal Pumps Manufacturer Product Group: Vertical Centrifugal Pumps CRN Centrifugal pump CRN Manufacturer article number: 96122358 Connection inlet side: Flange Connection outlet side: Flange Connection standard inlet side: EN 1092-2 Nominal diameter, connection outlet side: DN 65 Design: Vertical Speed: 2924 min Motor output power: 11.0 kW Protection class: IP55 Max delivery head: 90.2 m Max working pressure: 16 bar Weight: 193.2 kg List price: 14,844.00 € Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items in other sizes - new and used - in our store! International shipping costs on request!

Year of construction: 2006, condition: ready for operation (used), Flow rate: 20m³/h, delivery head: 41.5m, speed: 2925rpm, power at 50Hz: 5.5kW, 400V/690V, 10.3A/6A, power at 60Hz: 6.3kW, 460V, 10.1A, efficiency class: EFF2, weight: approx. 45kg. Godpfju Iztgsx Aa Ssua

Year of construction: 1997, condition: ready for operation (used), Etanorm SYN 80 -250, centrifugal pump for diesel fuel, 200 m³/h. Electric motor Siemens, 55 kW, 2940 rpm, 100 A. You can view all available pumps in the catalogue. Gusdpfx Aoxzcbksa Sja

Condition: used, Centrifugal pump, water pump -Max. Delivery rate: 432 l/h -max.: 40 m -Motor power: 200 watts -Dimensions: 375/95/H95 mm -Weight: 4.1 kg Godpfscdcn Dsx Aa Ssua

Condition: used, Centrifugal water pump Gsdpfjckbg Esx Aa Seua -Conveying capacity: 2.9 m³/h -Max. H: 26 mws -Motor power: 3 kW -Speed: 2900 rpm -Pipe connection inlet: DN 63 -Pipe connection outlet: DN 40 -Weight: 45 kg

Condition: used, Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 0.55 kW 2000 rpm -Max. Delivery rate: 10-50 l/min Gujdsd N Ddiepfx Aa Soa -without pump housing -Dimensions: 172/260/190 mm -Weight: 9.9 kg

Condition: used, Centrifugal pump, water pump -Delivery rate: 18 m³/h -Motor power: 1.1 kW -Connection: 380 V -Speed: 1400 rpm -Pipe connection inlet: DN Ø 64 mm -Pipe connection outlet: DN Ø 49 mm -Dimensions: 410/250/H300 mm Godpfod R Rk Ajx Aa Soua -Weight: 34 kg

Condition: used, Centrifugal pump, water pump, immersion pump -Manufacturer: Schmalenberger, immersion pump type ZB 40-18 -Feeding capacity: 27 m³/h -max. H: 5 m -Motor power: 1.45 KW -Speed: 2870 rpm -Pipe connection: see pictures -Dimensions: 300/300/H705 mm Gjdpfx Aefunxvea Sjua -Weight: 34 kg

Condition: used, Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 4 kW 960 rpm -Max. Delivery rate: 2.58 m³/h -Max. Pressure: 3 bar Gsdpfoctq Rdsx Aa Seua -Max. Temperature: °C -Dimensions: 730/350/H310 mm -Weight: 88 kg

Condition: used, Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 0.37 kW 2900 rpm -max: delivery rate: 14.3 m³/h -Nominal pressure: PN16, DN25 -Max. Temperature: 40 °C Gsdpfod I R Stjx Aa Soua -Dimensions: 290/295/H535 mm -Weight: 30.5 kg

Condition: used, Centrifugal pump, water pump -Pump: is sold as dismanteld Godpfxscti Avo Aa Seua -Delivery rate: 18-50 m³/h -max H: 12.7-8.5 mWs -Motor power: 2 kW -Speed: 2825 rpm -Pipe connection inlet: DN65 -Pipe connection outlet: DN50 -Dimensions: 460/280/H240 mm -Weight: 37 kg

Condition: used, Centrifugal pump, high pressure pump, water pump, multistage vertical centrifugal pump -Drive: 0.55 kW 1405 rpm -Max. Delivery rate: m³/h -Max. Pressure: bar -Max. Temperature: °C -Dimensions: 140/180/H380 mm -Weight: 19 kg Gjdpfx Aectg Risa Ssua

Condition: used, Centrifugal pump, high pressure pump, water pump -Max. Delivery rate: 2.0 m³/h -Dimensions: 360/140/H340 mm Gedodz Drpjpfx Aa Soua -Weight: 11 kg