Used Multistage Centrifugal Pump for sale (9,186)

Year of construction: 1995, condition: excellent (used), 3 Sulzer MB 40-160/5 centrifugal pumps Flow rate: 32 m³/h Nsdpfjd Sybpex Ahnslf Head: 147 m Maximum temperature: 130°C Seal: Mechanical seal with barrier fluid Drive power: Siemens 22 kW Speed: 2950 rpm ! Price per unit !

Year of construction: 1989, condition: good (used), In good condition, with connection for drain water. Head: 86 meters / 8.6 bar Flow rate: 600 m³/h Speed: 1450 rpm Drive power: 190 kW Nljdpfoc Iu Uijx Ahnjf Can also be used as a turbine!

Year of construction: 1987, condition: excellent (used), 1 chemical standard centrifugal pump with very few operating hours. The pump is suitable for acidic condensate and aggressive acids. Also suitable for saltwater!! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Flow rate: 250 m³/h Head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW Njdpfxoh S Nz Se Ahnelf NPSH: 1.6 Speed: 980 rpm Year of manufacture: 1987 Pump speed of 1480 rpm is also possible!! Flow rate at approximately 1480 rpm (information without guarantee) Flow rate: 430 m³/h Head: 62 meters Shaft power: 88 kW Shut-off valves and pipelines in stainless steel are also available. The material 1.4593 Noridur is very well suited for: - Chemical and process engineering industries - Sulfuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and handling - Flue gas desulfurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine engineering

Year of construction: 1995, condition: excellent (used), 2 Sulzer MB 80-230/3 centrifugal pumps Flow rate: 79-89 m³/h Njdpfjd Sybuex Ahnolf Head: 240-230 m Max. temperature: 130°C Seal: Mechanical seal with seal water connection Drive power: Siemens 90 kW Speed: 2980 rpm ! Price per unit !

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total length: 1,030 mm, total width: 450 mm, total height: 480 mm, 2 units of horizontal, transversely divided spiral casing pump in process design, with radial impeller, single-stage, single-suction. ! Price per unit ! Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft seal: Double-acting Burgmann mechanical seal with seal water connection and flow meter Impeller diameter: 169 mm Pump speed: 2950 rpm !!! ATTENTION !!! The nameplate indicates the operating parameters. This is not the actual flow rate at the best efficiency point !!!! I have attached 2 characteristic curves as photos. Photo 11: Best efficiency point Photo 12: Operating parameters from the last application Flow rate: 6.9 m³/h Head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87 % NPSH: 2.17 Nedpfx Asfyn Rpshnolf Data for the operating point in the last application, approximately: Flow rate: 2.2 m³/h Head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07 % NPSH: 1.99 Materials: Spiral casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Remaining parts in contact with the medium: 1.4517 Electric motor: 5.5 kW Energy efficiency class: IE 2 Voltage: 400/690 Volts Speed: 2950 rpm The material 1.4593 Noridur is very well suited for: - Chemical and process industries - Sulfur and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and transport - Flue gas desulfurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage treatment plants - Offshore and marine engineering ! Price per unit !

Condition: excellent (used), functionality: fully functional, Year of construction: 2013, power: 4 kW (5.44 HP), overall weight: 81 kg, total length: 590 mm, total width: 440 mm, total height: 360 mm, 2 magnetically coupled centrifugal pumps made of stainless steel. ! Price per unit ! Last used for pumping caustic soda. Manufacturer: CP Pumpen AG (Switzerland) Type: MKP 20-15-160 Design: Monobloc with base plate Delivery rate: 5 m³/h (1.38 liters/second) Delivery head / Pressure: 21.1 meters (2.1 bar) Medium temperature: 35 - 40 °C Impeller Ø 153 mm Speed: 2950 rpm Material (casing and impeller): 1.4581 Includes bolts and plug for connecting cable Nlodpewncv Refx Ahnof Motor: Siemens Type: 1LE10011BA222FA4 Power: 4 kW Voltage: 400 Volt Efficiency: IE2 Dimensions: Length: 590 mm Width with temperature sensor: 440 mm Base plate width: 330 mm Height: 360 mm Weight: 81 kg Inlet: DN 20 Outlet: DN 15 ! Price per unit !

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 260 kg, total length: 1,140 mm, total width: 450 mm, total height: 525 mm, volume flow: 14.5 m³/h, final pressure: 2.2 bar, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,440 rpm, protection type (IP code): IP56, 2 units of horizontal, radially split volute casing pumps in process design, with single-inlet, single-stage radial impellers. ! Price per unit ! Manufacturer: KSB Model: CPKN-C3.1 040-250 Year of manufacture: 2009 Shaft seal: Double-acting Burgmann mechanical seal with flushing water connection and flow meter Impeller diameter: 260 mm Pump speed: 1440 rpm Please note: The nameplate indicates the parameters from the last duty point, not the pump’s design (best efficiency) point! Best efficiency point according to curve: Flow rate: 14.5 m³/h Head: 22 meters (2.2 bar) Shaft power: 1.85 kW Efficiency: 46.1 % NPSH: 1 m Duty point from last application: Flow rate: 6.0 m³/h Head: 24.0 meters Shaft power: 1.36 kW Efficiency: 30 % NPSH: 0.8 m Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 4.0 kW Energy efficiency: IE1 Voltage: 400/690 V Speed: 1440 rpm Material 1.4593 Noridur is ideally suited for: - Chemical and process engineering industries - Sulfuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industries - Food and sugar industries - Mining/coal extraction and handling - Flue gas desulfurization plants Nledjxp Eqkopfx Ahnef - Acidic, chloride-containing wash suspensions - Acidic process water - Wastewater treatment plants - Offshore and marine applications ! Price per unit !

Year of construction: 2010, condition: used, For sale is a used vertical, free-flow centrifugal pump from Emile Egger Pumpe & Co. AG, manufactured in 2010. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V4 LB3B-2 Serial number: T 200708 Year of manufacture: 2010 L/s: 2.77 1/min: 1800 m: 14.7 Connections: DN50 and DN65 Nodpfxjgbflus Ahnslf Length: 182 cm Quantity: 1 Motor data: Manufacturer: VEM motors GmbH Type: K21R 132 S 4T FDS TPM140 /0543 Serial number: 0883082001004H kW: 5.5 V: 400 / 690 A: 11.8 / 6.85 1/min: 1425 Further data can be found on the nameplate.

Year of construction: 2010, condition: used, For sale is a used vertical, free-flow centrifugal pump from Emile Egger Pump & Co. AG, manufactured in 2010. Pump data: Manufacturer: Emile Egger & Co. AG Type: TEOV 41-40 V2 LB3B-2 Serial number: T 202000 Year of manufacture: 2010 L/s: 2.77 1/min: 2390 m: 26.5 Connections: DN50 and DN65 Length: 192 cm Quantity: 1 Motor: Manufacturer: VEM motors GmbH Year of manufacture: 07/2010 Type: K21R 160M 2 FD TWS HW Nljdegbflmjpfx Ahnof Serial number: 178086/0001 H kW: 11 HP: 15 V: 400 A: 20 1/min: 2900 Further data, see nameplate.

Condition: new, Nominal rating l/h 2000 l/h Motor rating 0,37 (0,5) kW (PS) Connected load 230V 50Hz (single-phase) Electrical protection 16 A Weight 14 kg Nsdpfx Ajb Nu Scohnolf Material 1.4301 / AISI 304 Pressure max. 1,5 bar / 15m Suction max. 0,5 bar / 5m Connection for juice inlet 1¼ " Connection for juice outlet 1¼ "

Condition: used, Year of construction: 2002, FRISTAM PUMP FM 252 C STAINLESS STEELMulti-stage centrifugal pump 30 m3/hHMT 70msuction diameter: 65 Nodpfx Ahox Rz S Ajnolf discharge diameter: 50Year 2002Engine 15 KW – 2900 rpm – 400/690v IP55Deported terminal block Mechanical seal

Condition: new, Manufacturer: Grundfos Nlodjvvtg Dopfx Ahnef Type: TP65-130/4 A-F-A-GQQE Model: A96087437 P2 03 32 0001 Delivery quantity: 29.5 m³/h Delivery head: 10.4 m Speed: 1,430 rpm Pressure: 16 bar Condition: unused Dimensions: 500 x 400 x 500 mm Weight: 75 kg

Year of construction: 2014, condition: good (used), Inoxpa SE35 Centrifugal pump Serial: 1192643A Nljdpfx Ahoqqhu Dsnjf 2014, Stainless centrifugal pump, 180mm impeller diameter

Condition: as good as new (ex-display), Grundfos CRNE1-9 Vertical multistage pump Nsdpfx Ahovw Sqdonslf Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade stainless steel, see plate for full spec, 2 in stock

Condition: good (used), Fristam FPX712-130 Sanitary centrifugal pump Sanitary centrifugal pump for food, dairy and beverage processing, see plates for spec, 2 in stock Njdex R U Nnjpfx Ahnolf

Condition: good (used), Alfa Laval LKH70 Centrifugal pump Serial: 49700 Stainless centrifugal pump, 22Kw motor, 3Ph Nsdpfx Aju N Hxdohnjlf

Condition: good (used), Wilo ILE80-190 Glanded centrifugal pump Glanded centrifugal pump, with built in frequency converter for electronic control for constant or variable pressure, 21Kw, two in stock Nedew Dylhepfx Ahnelf

Condition: good (used), Wilo ILE50-170 Glanded centrifugal pump Nodpfx Aew Dylnehnslf Glanded centrifugal pump, with built in frequency converter for electronic control for constant or variable pressure, 8.6Kw, two in stock

Condition: used, overall weight: 955 kg, total length: 2,150 mm, total width: 750 mm, total height: 1,700 mm, volume flow: 4,000 m³/h, PU 100 Length/Width/Height: 2.15m x 0.75m x 1.70m Weight: 955kg RPM: 1450 Head: 30m N/PS/Kw: n/a Nlsdpfsxvrafjx Ahnsf Flow Rate: 4000L/min Year of manufacture: n/a We have many other centrifugal pumps in stock. Feel free to contact us!

Condition: not inspected (used), Rotary pump (Pu 115) lenght/width/height: 1,15m x 0,40m x 0,65 m weight: 165kg Motor Power: no info Njdpfed Nd Uksx Ahnjlf rpm: 1400 Capacity range: 36 Hm : 30

Condition: good (used), KSB VF35-5 Movitec high-pressure inline pump 11 kW Manufacturer: KSB Type: Movitec VF32 5 ID No.: 47110112 Maximum flow rate: 27 m³/h Maximum flow rate: 2850 l/min Nljdpfsq Tqnqjx Ahnsf Mains voltage: 3~400/690 V Protection class: IP55 Power: 11 kW 21.8 A You can find more centrifugal pumps - new and used - in our store! International shipping costs on request!

Condition: good (used), KSB Pump Etaline GN 080-210/404 G11 Inline pumps and three-phase standard motor with motor-mounted frequency converter for stepless speed adjustment. Areas of application: Heating systems Air conditioning systems Domestic hot water systems water supply systems industrial circulation systems Nsdpfxsiu U Txe Ahnelf Materials to be pumped Fluids that do not chemically or mechanically attack the pump materials. Operating data Q to see data sheet H to see data sheet For the data of this pump, please refer to the data sheet 1) The sum of inlet pressure and delivery head at zero flow must not exceed the specified exceed the specified value Design Close-coupled pump in in-line design, with variable-speed standard motor, pump shaft and motor shaft are rigidly connected. Bearings Deep groove ball bearing grease lubricated. Shaft seal uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: cast iron Standard motor and stub shaft Size designation: 80 Nominal width suction/ discharge 210 For further technical data, please refer to the data sheet. Item condition: used Scope of delivery: 1 x KSB pump Etaline GN 080-210/404 G11

Condition: new, Grundfos CRN32-5-2 A-F-G-E-HQQE Vertical centrifugal pump CRN 32-5-2 A-F-A-E-HQQE Vertical, multistage centrifugal pump with opposing suction and discharge connections (inline design). The pump components in contact with the medium are made of high-quality stainless steel. The cartridge seal promises high reliability and ease of servicing. Power is transmitted via a rigid, split coupling. The pipe connection is made via combined DIN flanges. The pump is equipped with a 3-phase, fan-cooled asynchronous motor. Manufacturer: Grundfos Manufacturer Product Group: Vertical Centrifugal Pumps Manufacturer Product Group: Vertical Centrifugal Pumps CRN Centrifugal pump CRN Manufacturer article number: 96122358 Connection inlet side: Flange Connection outlet side: Flange Connection standard inlet side: EN 1092-2 Nominal diameter, connection outlet side: DN 65 Design: Vertical Nedjwbfigjpfx Ahnjlf Speed: 2924 min Motor output power: 11.0 kW Protection class: IP55 Max delivery head: 90.2 m Max working pressure: 16 bar Weight: 193.2 kg List price: 14,844.00 € Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items in other sizes - new and used - in our store! International shipping costs on request!

Condition: good (used), KSB pump Etaline GN 050-160 / 074 G10 Inline pumps and three-phase standard motor with motor-mounted frequency converter for stepless speed adjustment. Applications: heating systems air conditioning Water systems water supply industrial circulation systems conveyed Liquids that do not attack the pump materials chemically and mechanically. operating data Q 17,50 m3 / h H 5.8 m Nedpfxed Sqkze Ahnelf Further data of this pump can be found in the data sheet 1) The sum of inlet pressure and delivery head in the zero point of quantity may be said to Do not exceed the value execution Block pump in inline design, with variable-speed standard motor, pump and motor shaft are rigidly connected. camp Deep groove ball bearing grease lubricated. shaft seal uncooled and maintenance-free mechanical seal according to EN 12 756 Pump series: Etaline Material combination: gray cast iron Standard engine and stub shaft Size designation: 65 Nominal diameter suction / discharge connection 160 Further technical data can be found on the data sheet. Item condition: used Scope of supply: 1 x KSB pump Etaline GN 050-160 / 074 G10

Condition: like new (used), FISCHER Maschinen- und Apparatebau AG Type: H50/3v Serial No: 002664417-3 Year: 2013 Made in Austria Technical details: Flow rate: 25 m³/h Head: 15 m WS Power: 3 kW Nodpfsxpitvjx Ahnolf Speed: 2900 rpm Minimum back pressure: 1 m WS Condition: The pump appears unused and comes from the surplus stock of a factory closure. However, due to its origin, we cannot guarantee that it is brand new. Sold as is, as shown in the photos.