Used Newton 25 for sale (14,875)

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Hsdpfx Aoyi A Tdjb Esnk

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,025 h, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 2,025 mm, fuel type: gas, mast type: triplex, construction height: 2,595 mm, fork length: 1,200 mm, empty load weight: 3,560 kg, total length: 2,640 mm, drive type: Treibgas, construction width: 1,150 mm, LPG forklift Load centre: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Hnjdpfx Abjy A Acye Eok Front tyres type: Superelastic Front tyres condition: 40 - 60% Rear tyres type: Superelastic Rear tyres condition: 80 - 100% Sideshift, 3rd valve, 4th valve, rear work lights, front work lights, overhead guard, windscreen, full free lift, CE certificate,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,095 h, load capacity: 2,500 kg, lifting height: 6,000 mm, free lift: 2,025 mm, fuel type: gas, mast type: triplex, construction height: 2,595 mm, fork length: 1,200 mm, empty load weight: 3,560 kg, total length: 2,640 mm, drive type: Treibgas, construction width: 1,150 mm, LPG forklift Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tyre type: Superelastic Front tyres condition: 60 - 80% Rear tyre type: Superelastic Rear tyres condition: 80 - 100% Hedpfx Abey A Acte Ejnk Sideshift, 3rd valve, 4th valve, rear work light, front work light, roof cover, windscreen, full free lift, CE certificate,

Condition: like new (used), Year of construction: 2018, functionality: fully functional, cooling capacity: 22 kW (29.91 HP), type of input current: three-phase, type of cooling: air, overall weight: 433 kg, input voltage: 400 V, total width: 860 mm, total length: 2,050 mm, total height: 1,660 mm, warranty duration: 6 months, heating capacity: 25 kW (33.99 HP), Aircooled chiller/Heat pump EMICON PAE 361 KA 22 kW/25 kW Cooling capacity: 22 kW / 6.26 tons (12/7 — 35°C) Heating capacity: 25 kW / 7.11 tons (40/45 —7°C) Year of manufacture: 2018 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Copeland ZH92K4E-TWD-524 (scroll) Type of refrigerant: R134A Number of fans: 2 pcs. EBMPAPST A6E630-AN01-01 Dimensions: 2.05x0.86x1.66 m. Weight: 433 kg. Condition: Outlet (Transportation damage present) Hnodpfx Abev N Dnfe Esk CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 22 kW (29.91 HP), type of input current: three-phase, type of cooling: air, overall weight: 433 kg, input voltage: 400 V, total width: 860 mm, total length: 2,050 mm, total height: 1,660 mm, warranty duration: 6 months, heating capacity: 25 kW (33.99 HP), AIRCOOLED CHILLER/HEAT PUMP EMICON PAE 361 KA 22 / 25 KW Cooling capacity: 22 kW / 6.3 tons (12/7 — 35°C) Heating capacity: 25 kW / 7.1 tons (40/45 — 7°C) Year of manufacture: 2024 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper-aluminum Type of refrigerant: R134a Compressors: 1 pcs. Copeland ZH92K4E-TWD-524 (scroll) Number of fans: 2 psc. Dimensions: 2.05x0.86x1.66 m. Weight: 433 kg. Condition: Never used, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Hnjdpfxsvmzrie Ab Eek After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,100 kg, input voltage: 400 V, total length: 950 mm, total width: 1,460 mm, total height: 2,380 mm, Press Characteristics open back design fixed table crankshaft mounted transversely friction clutch rigid and durable machine construction horizontally mounted crankshaft dry pneumatic clutch lifting balance device safety valves manual control Technical Specifications Press force: 25 t Stroke under nominal load: 3 mm Slide stroke: 10 – 110 mm Number of strokes: 80 – 120 strokes/min Max. die set height: 250 mm Die height adjustment: 50 mm Throat depth: 210 mm Distance between frame columns: 450 mm Working table width: 700 mm Working table length: 400 mm Working table thickness: 80 mm Table hole diameter (outer): Ø170 mm Table hole depth: 20 mm Table hole diameter (inner): Ø150 mm Hnjdpeytcvgofx Ab Esk Slide bottom surface width: 360 mm Slide bottom surface length: 300 mm Punch hole diameter: Ø40 mm Punch hole depth: 60 mm Motor power: 3 kW Overall dimensions (W × L × H): 1460 × 950 × 2380 mm Weight: 3100 kg Equipment light curtains mechanical guards ejector in the lower table Delivery Delivery to the customer is possible. The delivery cost is determined individually based on the carrier’s quotation. Additional Information If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 250 kN (approx. 25.5 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 10 mm/s Return speed: 14 mm/s Hnjdpfx Abjyr Ek Rj Eek Motor power: 3 kW

Condition: new, Year of construction: 2026, Automatical capsule filling machines SPT-FL25 Series (S. Korea) are design for fully automatic filling of hard gelantine capsules size #00 - #4, (optional # 000, 5) with powder, granulate or pellets for pharmaceutical and food supplements production. The equipment is distinguished by its high quality, simple operation. The disc method of filling provides high dosing accuracy. The machines are equiped with sets of tools for 1 capsule size from #00 to 5 (optional #000,5). The machines are conform to GMP standards and CE certificat; SPT-Series guarantee the highest quality of production! The small capsule filling machine SPT-FL25 for R&D and small general scale production; According to GMP regulations; HMI system; Touch screen, PLC control system; 2 years warranty; Installation and service from Germany Number of capsule holder per segment - 3 psc/h; Max.production quantity of capsules - 25 000 psc/h (by 1 segment hole); 17 000 psc/h (by 2 segments hole), 8 500 psc/h (by 1 segment hole). Weight of machine -700 kg; Space consumption - 900 x 1100 x 1700 mm Hnodpfxsdy Dyfj Ab Eek

Condition: excellent (used), functionality: fully functional, Twin-Screw Extruder / Twin-Screw Kneader COLLIN ZK 25 For sale is a COLLIN ZK 25 twin-screw extruder in a compact laboratory or technical center design. The machine is ideal for trials, compounding, product development, as well as smaller-scale production applications. Hodpey A H Umjfx Ab Ejnk The extruder features a screw diameter of 2 x 25 mm with a process length of 36 D (6x6 D). Depending on the configuration, screw speeds of 460 / 600 / 800 min⁻¹ are possible. The drive power is 9.7 / 12.5 / 16 kW. The maximum melt pressure is 320 bar, and the maximum melt temperature is 400 °C. The machine is equipped with multiple heating zones. Barrel heating is 1 x 850 W plus 5 x 1200 W, and nozzle/adapter heating is 600 W. Water cooling is available, and temperature control is provided for zones 1 to 6, with water cooling connected via hose. Technical Data: • Manufacturer: COLLIN • Model: ZK 25 • Design: Twin-screw extruder / Twin-screw kneader • Screw diameter: 2 x 25 mm • Screw length: 36 D • Screw speed: 460 / 600 / 800 min⁻¹ • Max. melt pressure: 320 bar • Max. melt temperature: 400 °C • Weight: approx. 550 kg • Dimensions: • Length: approx. 2,100 mm • Width: approx. 600 mm • Height: approx. 1,900 mm • Screw center height: approx. 1,100 mm Electrical Data: • Connection: 3 x 400/230 V, 50/60 Hz • Power supply: L1 / L2 / L3 / N / PE • Fusing: 3 x 50 A • Max. connected load with downstream units: 30 kW Applications: Ideal for laboratory usage, technical centers, R&D, test series, compounding, and material testing.

Condition: used, machine/vehicle number: 11796, Rotor diameter: 250 mm Hedpfx Ajyr Ttyob Eenk Rotor width: Rotor blade: 3 Stator knife: 4 Inlet cross-section approx. 250 x140 Drive motor: 5.5 kW

Condition: used, machine/vehicle number: 10976, 3-blade rotor 2 rows of stator blades Rotor diameter: 350 mm Rotor width: 250 mm Inlet cross-section for profiles: approx. 250 x 100 mm Hodpoyr Tizsfx Ab Eenk Machine in noise-protection enclosure

Condition: good (used), Year of construction: 2006, Screw compressor Worthington Creyssensac RLR 25 AM8 with air dryer DW21 and receiver F900 (900 liters) Year 2006 Working hours: 16405 Condition: very good, after full maintenance (new filters, oil, belts) - Max.pressure: 7,50 bar - Power: 18,5 kW - Capacity: 3300 l/min Hedpfxehqb T Re Ab Eonk - Dryer capacity: 3300 l/min - Receiver: 900 l

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 4,407 h, load capacity: 2,500 kg, lifting height: 3,670 mm, fuel type: diesel, mast type: telescopic, construction height: 2,460 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, empty load weight: 4,262 kg, drive type: Diesel, Diesel Forklift Load center: 500 mm ISO Class: ISO Class 2 = 1,000 – 2,500 kg Mast type: Telescopic Transmission: Electromechanical Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 23x9-10 Rear tires type: Superelastic Rear tires size: 21x8-9 Description: In addition to this unit, we also offer a wide range of forklifts and warehouse equipment. All our machines are serviced and inspected according to FEM4.004 standards. Please contact us by email or phone. You can also find us at hsr-gabelstapler. We are also happy to buy your used equipment — even if you do not purchase a vehicle from us. Leasing and financing options available on request at attractive terms. We are happy to provide you with professional and comprehensive advice on our vehicles. Hsdpfxsy Aqh Rj Ab Eonk Side shifter, 3rd valve, rear working lights, front working lights, heating, soot filter, full cabin, CE certificate, safety light, interior mirror, joystick, beacon, wiper, single pedal, LED, seat.

Year of construction: 2009, condition: good (used), Linear drive, linear gear, lifting gear, spindle drive, linear unit, linear guide, linear axis, short-stroke linear axis, linear motion rail guide, linear table, positioning table -Manufacturer: RK Rose Krieger, Flat short-stroke linear axis for manual adjustment -Type: unfortunately without type designation -Travel: 25 mm -Position indicator: Fiama OP3A Hnjdpfoxln T Hox Ab Eok -Number: 1x linear axis available -Dimensions: 315/135/H55 mm -Weight: 3.3 kg

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Hnodpfx Abjiyynde Ejk Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, Hsdod Sg Hrspfx Ab Eenk screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. Hnjdpfxsiyynws Ab Ejk More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: excellent (used), Year of construction: 2026, functionality: fully functional, Press force: 25 t Bending length: 1250 mm Hnedpfx Aboyz Sw Rs Eek Distance between uprights: 1200 mm Control: Cybelec CybTouch 12 Stroke: 150 mm Installation height: 340 mm Rapid down speed: 220 mm/s Bending speed: 0-12 mm/s Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Dimensions: 1980 x 1170 x 2185 mm Standard equipment: Basic features: • CNC control Cybelec CybTouch 12 • 4 axes: Y1-Y2-X-R • Backgauge system model GHP-2 • Servo-driven main motor • Safety system: DSP AP+MCS • HAWE hydraulic system • CE standard

Condition: excellent (used), functionality: fully functional, tool type: VDI 40, For sale is a package consisting of two high-quality driven tool holders for Traub TNA 480 / 500 / 600. Mount: VDI 40 (DIN 69880) Design: Axial Cooling: External coolant supply Compatibility: Optimized for Traub TNA 480, TNA 500, TNA 600 (originally from a TNA 480L) Tool 1: Collet chuck Manufacturer No.: 723 240 Tool receptacle: ER32 collet Tool 2: Milling arbor / Weldon Manufacturer No.: 732 970 (marking 1 B) Tool receptacle: Weldon / milling arbor Ø 25 mm Hnedpfx Ajyz Uciob Eek The tools are in very good, ready-to-use condition.

Condition: good (used), Year of construction: 1997, Used small press brake from Safan Model: SMK L 25 1250 TS1 Capacity: 1250 x 25 tons Hjdpjy Atw Uefx Ab Eenk TS1 CNC control Y1, Y2 and X axes CNC controlled Machine is supplied with one set of tools (not yet visible in the pictures)

Condition: used, maximum load weight: 32,680 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2027, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 25 m³, total width: 2,550 mm, total height: 3,550 mm, Year of construction: 2025, Equipment: ABS, 3-axle tipper semi-trailer F.X. MEILLER Hardox steel 25 cbm First registration March 2025 Mileage only 40,139 km Internal dimensions (LxWxH) 7,600 x 2,300 x 1,500 mm Fifth wheel height 1,250 to 1,300 mm Loading volume 25 cbm High-pressure tipping cylinder 250 bar Prepared for temperature measurement system Tipping floor Hardox steel HB 450, 5 mm Tailgate Hardox steel HB 450, 4 mm External inclined pendulum rear wall Side walls HB 450 Hardox steel, 4 mm Electric sliding cover with wireless remote control, tarpaulin opens automatically when tipping starts 2x LED reversing lights BPW reinforced axles, "Off-Road" version, with large disc brakes, 430 mm 1st axle is a lift axle WABCO trailer EBS with RSS stability program WABCO smartboard with axle load indicator 6x 385/65 R 22.5 tires Paver brake (can be deactivated) Automatic tipping lowering RENTING is the new BUYING - also available immediately from us with full-service rental----- Hedpfx Abjyzltfj Eenk

Condition: used, Double-column Hydraulic Press SCHÖN Type SH 25 Machine No. 2440 Year of manufacture: 1979 Press force: 25 tons Column spacing: 630 mm Lateral passage between columns: 120 mm Table area: 580 x 320 mm Ram area: 360 x 220 mm Clamping pin hole: Ø 40 mm Maximum ram stroke: 100 mm Maximum installation height: 270 mm Table height above floor: 900 mm Hnsdpfsyz Dr Tex Ab Eek Motor power: 7.5 kW Power supply: 380 Volt, 50 Hz - Main cylinder overhauled in 2025 - SICK LUV 206 safety light curtain - Two-hand control - Stroke counter - Rapid stroke and working stroke - Stroke limitation dependent on pressure or position - Mechanically adjustable fixed stop - Press force regulation - Press time extension 1–10 s (pressure holding time) - No operating manual and no wiring diagrams Required space (L x W x H): 1450 x 1100 x 2200 mm Weight: 1200 kg In good condition

Condition: used, Column Drilling Machine ALZMETALL Type AB 25 SV Machine No. 3456 Year of manufacture: 1993 Drilling capacity: 25 mm Spindle taper: MT 3 - long quill Throat depth: 290 mm Quill stroke: 160 mm Table size: 510 x 300 mm Hnjdpfsyz Dr Hox Ab Ejk Column diameter: 115 mm Spindle speed: 65 - 1750 rpm, stepless adjustment Automatic feed: 0.15 mm/rev Motor power: 0.9 and 1.3 kW, pole-changeable Power supply tested: 400 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds, and stepless adjustment via variator drive - Intermediate gear stage for high torque at low speeds - Spindle speed indicator - Coolant system - Table height adjustment by hand crank - Foot switch for spindle ON/OFF - Emergency stop push button - Lighting unit - Machine base with machined workpiece support surface - Quick-action drill chuck ALBRECHT 1 to 13 mm Space requirement (L x W x H): 1200 x 650 x 1900 mm Weight: 400 kg Very good condition

Condition: excellent (used), color: orange, lifting height: 25,500 mm, Year of construction: 2007, operating hours: 9,654 h, Drivetrain Make of engine: Volvo Weights Empty weight: 18.000 kg Functional Lifting capacity: 25.000 kg CE mark: yes Condition Technical condition: very good Visual appearance: very good Hsdpfxey Amyvj Ab Ejnk Other information Delivery terms: EXW Latest inspection: 2025-12-16 Production country: IT Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks = Remarks = Ecopower MGI 25 Telescopic Crane * 2007 * 9,654 operating hours * Diesel drive * 4x4x4 steering * Pick and Carry function up to 9,500 kg * 25,000 kg lifting capacity * 18,000 kg own weight * equipped with you * TUV inspection valid until December 2026 * TCVT inspection valid until December 2027 * Agricultural vehicle 25KM * Includes maintenance history and documents

Condition: good (used), Year of construction: 2001, operating hours: 7,726 h, load capacity: 2,500 kg, lifting height: 3,500 mm, fuel type: electric, mast type: duplex, empty load weight: 4,500 kg, mileage: 7,726 km, Trade-in received. Electric duplex forklift, brand Still, year of manufacture 2001, capacity 2,500 kg, lift height xxx, overall height xxx, 7,726 operating hours. Equipped with FREELIFT and sideshift. Battery from 2014, with charger and automatic filling system. Hnedpfxey Aplbs Ab Ejk