Used New for sale (19,790)

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 @ 1400 Nm @ rpm Dimension: 3,500 x 1,920 x 2,200 axle configuration: 2WD No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Lhodpfxey Tyg Dj Abyol Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.200 kg Wheelbase: 205 cm Engine type: New Holland S8000 Emission class: Euro 2

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, maximum speed: 30 km/h, total height: 2,200 mm, total length: 3,500 mm, total width: 1,920 mm, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 Nm @ 1400 rpm Dimension: 3,500 x 1,920 x 2,200 No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Lhsdpfjy Tyg Rsx Abysl Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.400 kg Wheelbase: 205 cm Engine type: New Holland S8000 Fuel tank: 60 litres Emission class: Euro 2

Condition: new, power: 55 kW (74.78 HP), fuel type: diesel, fuel tank capacity: 60 l, axle configuration: 4x4, emission class: euro2, Year of construction: 2025, Equipment: all wheel drive, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 3,908cc Torque: 257 Nm @ 1400 rpm Dimension: 3,660 X 2,010 X2,400 Gearbox type: 8F + 2R partially synchromesh No. of cylinders / aspiration: 4 / naturally Capacity (cm³): 3,908 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 54.7/75 Max. torque (gross) (Nm@rpm): 257 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 1.03 Optional without creeper (F+R) 12+3 Speed range (kph) 2.14 - 31.85 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Lsdpfey Tyc Ssx Abyjhl Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1500 Maximum lift capacity at ball ends with assist arms (kg) 2000 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3275/4200 = More information = Number of cylinders: 4 GVW: 2.700 kg Wheelbase: 216 cm

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 96.1 kW (130.66 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,224 kg, input voltage: 400 V, total width: 1,260 mm, total length: 3,300 mm, total height: 2,120 mm, warranty duration: 12 months, AIRCOOLED CHILLER MTA TAEEVO TECH 402 96.1 KW Cooling capacity: 96.1 kW / 27.32 tons (12/7 — 35°C) Year of manufacture: 2022 Options: Hydraulic module. Lodpfez Dt Udsx Abyshl Refrigerant circuit: 2 pcs. Heat exchanger: Finned evaporator immersed in tank Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland ZP103KCE-TFD-477 (scroll) Type of refrigerant: R410A Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump Lowara PLM112RB14S2/340 E3, expansion vessel. Dimensions: 3.3x1.26x2.12 m Weight: 1224 kg Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 819.9 kW (1,114.75 HP), type of input current: three-phase, type of cooling: air, overall weight: 9,348 kg, input voltage: 400 V, total width: 2,250 mm, total length: 8,200 mm, total height: 2,510 mm, warranty duration: 12 months, AIRCOOLED CHILLER STULZ WSJ4232MLA50Z00_1Z 819.9 KW Cooling capacity: 819.9 kW / 233.12 tons (12/7 — 35°C) Year of manufacture: 2025 Options: Hydraulic module. Freecooling. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Copper / Aluminum (Freecooling) Compressors: 2 pcs. Bitzer CSHV37-240Y-40A (screw, inverter) Type of refrigerant: R1234ze Number of fans: 12 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos NBE 80-160/167 Ledpfx Ajz Anw Tobyohl Dimensions: 8.2x2.25x2.51 m Weight: 9348 kg Working hours: 83/80 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 269.7 kW (366.69 HP), type of input current: three-phase, type of cooling: air, overall weight: 743 kg, input voltage: 400 V, total width: 1,100 mm, total length: 4,250 mm, total height: 1,590 mm, warranty duration: 12 months, Dry-cooler AERMEC WTR 8043BTD 269.7 KW Cooling capacity: 269.7 kW (40/35 - 25°C) Year of manufacture: 2023 Fluid: Glycol + Water Number of fans: 4 pcs. Fan Diameter: 800 mm Volume: 80 dm³ External surface: 630.5 m² Dimensions: 4.25 x 1.1 x 1.59 m. Weight: 743 kg. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Lsdez Agxvspfx Abyehl LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: ready for operation (used), functionality: fully functional, !!! We have two units in stock. Price is for one unit only !!! 🔄 Shaking & Drive System * Speed Range: 25 to 400 RPM (maximum 300 RPM when units are stacked). * Shaking Orbit: 3/4 inch (1.9 cm) circular orbit is the standard configuration (some documentation notes 1-inch or 1/2-inch options depending on the exact sub-model code). * Drive Mechanism: Triple-eccentric counterbalanced drive powered by a maintenance-free, brushless DC motor. 🌡️ Temperature Control * Temperature Range: 4°C (or 20°C below ambient temperature) up to 75°C (for 50 Hz units) or 80°C (for 60 Hz units). * Control Accuracy: Ambient temperature can be set in 0.1°C increments with a control accuracy of ±0.1°C. * Refrigeration: Hermetically-sealed 1/5 HP compressor using CFC-free R134A refrigerant. 📐 Capacity & Dimensions Lhsdpfxjz Dhl Rj Abyjl * Overall Dimensions: 24.4" W × 28.7" D × 36.4" H (62 cm × 73 cm × 92.5 cm). * Internal Chamber: 20.5" W × 20.5" D × 24.8" H (52 cm × 52 cm × 63 cm). * Platform Size: 18" × 18" (46 cm × 46 cm) standard universal or dedicated platforms. * Flask Capacity: Accommodates glassware ranging from 10 mL up to 6-liter Erlenmeyer flasks. * Static Incubation: Includes 2 height-adjustable stationary shelves for incubating Petri dishes or test tube racks without shaking. * Net Weight: Approximately 300 to 360 lbs (136 to 163 kg) depending on options. ⚡ Electrical & Utility Features * Power Requirements: 240V versions (50 Hz), up to 1500–1800 VA maximum power consumption. * Timer: Continuous or programmable from 0.1 to 99.9 hours. * In-Chamber Outlet: Internal, moisture-resistant electrical outlet to power secondary equipment inside the chamber. * Safety Features: Automatic shaker shut-off when the door is opened, independent over-temperature thermostat, and audible/visual alarms for speed and temperature deviations. Good working condition. Please check out our other listings as well.

Condition: used, Second-hand New eco-tec ALLin DRYer belt dryer for drying wood chips for the production of briquettes. Lhedjzzk H Uspfx Abysl Possible products: Separated fermentation substrate (fine-textured, air-permeable, frost-free, free from foreign matter, fully fermented; base material: maize silage, slurry, cereals, ≥30% dry matter) Wood chips G30 (free-flowing, air-permeable, frost-free, > 0°C, low in resin, free of coarse material, free of foreign matter) Technical data: - Heating medium: Hot water 90°C flow / 70°C return - Heating capacity: ~ 400 kW - Drying temperature: approx. 80 °C at 90° flow - Weight: ~ 12 t

Condition: new, Year of construction: 2022, functionality: fully functional, overall weight: 55 kg, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, NEW !!!industrial axial fan 910mm diam 29000m3/h Ziehl-Abegg FC091-ADS.7M.V7 /ct2311/ 3PCS IN STOCK Diameter 910mm 400V 29000m³/h 680/520 rpm manufacturer : Ziehl-Abegg FC0910-ADS.7M.V7 Power supply: 400V RoHS compliance: Yes Diameter (propeller or turbine): 910mm Lhedpfx Abexx U Tgoyol Flow rate (m³/h): 29000 Air pressure: 70-140pa Frequency: 50/60Hz Protection rating: IP.54 Current consumption (amperes): 3.6/2.3 Bearing mounted Curved aluminum blades 7pcs "replaceable" Noise level (decibel): 83 Power consumption (watts): 1250W/660W Airflow direction: Propeller towards the mounting points Air temperature range: -25°C to +60°C Connection type: Terminal box Speed ​​(rpm): 680/520 Weight: 55kg Overall dimensions: B1 = 337mm B2 = 20mm, D1 = 1005mm, D3 = 102

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 8,950 h, 16-ton excavator Steel tracks with rubber pads Powertilt Slope bucket Digging bucket, 120 cm Sorting grapple for stone laying Short-tail excavator 8,950 operating hours Immobilizer VAT can be shown separately Ljdezzrpdspfx Abyjhl If you have any questions or require further information, please feel free to send me a message or call me.

Condition: new, This offer is for a new ‘BDT VX 370’ long-sheet feeder Item for sale: 1 x BDT VX 370 for the following machines: Canon imagePRESS V1350 Lhjdpfx Asyuuc Isbyol incl. S-Bridge Condition: This is a brand-new unit in its original packaging Packaging and shipping: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide shipping available on request! For further information, please feel free to contact us directly.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 101 kW (137.32 HP), type of input current: three-phase, type of cooling: air, overall weight: 796 kg, input voltage: 400 V, total width: 1,180 mm, total length: 2,760 mm, total height: 1,810 mm, warranty duration: 12 months, Aircooled chiller CLIVET WSAT XEE 402 101 KW Cooling capacity: 101 kW / 28.72 tons (12/7 — 35°C) Year of manufacture: 2025 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Сopeland ZP293KZE-TED-456 (scroll) + 1 pcs. Сopeland ZP182KCE-TFD-455 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Dimensions: 2.76x1.18x1.81 m. Weight: 796 kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Ljdpfx Abszxqmcsyshl After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 93.4 kW (126.99 HP), type of input current: three-phase, type of cooling: air, overall weight: 743 kg, input voltage: 400 V, total width: 2,130 mm, total length: 2,280 mm, total height: 1,330 mm, warranty duration: 12 months, AIRCOOLED CHILLER CARRIER 30RB 090R 0153 93.4 KW Cooling capacity: 93.4 kW / 26.56 tons (12/7 — 35°C) Year of manufacture: 2022 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Lhodpfx Aszxpazsbyjl Compressors: 2 pcs. Danfoss DSF200A4ACA (scroll) Type of refrigerant: R32 Number of fans: 2 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump Grundfos AC25-125 (Frequency inverter), expansion vessel. Dimensions: 2.28x2.13x1.33 m Weight: 743 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 381 kW (518.02 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,100 kg, input voltage: 400 V, total width: 2,200 mm, total length: 5,600 mm, total height: 2,500 mm, warranty duration: 12 months, Aircooled chiller Trane RTAF 105 XE SN 381 kW Cooling capacity: 381 kW / 108.34 tons (12/7 — 35°C) Year of manufacture: 2021 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Microchannel, Aluminum Compressors: 2 pcs. Trane CHHP0L2TKL0N069A (screw) Type of refrigerant: R134a Number of fans: 10 pcs. (EC-fans) Dimensions: 5.6x2.2x2.5 m. Weight: 4100 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Lsdszxntgepfx Abyshl Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2018, functionality: fully functional, cooling capacity: 221.1 kW (300.61 HP), type of input current: three-phase, type of cooling: water, overall weight: 2,000 kg, input voltage: 400 V, total width: 1,200 mm, total length: 3,000 mm, total height: 1,700 mm, warranty duration: 12 months, Watercooled chiller Climaveneta FX W 0951 221.1 kW Cooling capacity: 221.1 kW / 62.87 tons (12/7 — 35°C) Year of manufacture: 2018 Refrigerant circuit: 1 pcs. Heat exchanger: Shell and tube Compressors: 1 pcs. Bitzer CSH7593-110Y-40P (screw) Type of refrigerant: R134A Dimensions: 3x1.2x1.7 m. Weight: 2000 kg. Working hours: 33 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Lsdpfxozxnp Io Abyehl Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 63.6 kW (86.47 HP), type of input current: three-phase, type of cooling: air, overall weight: 649 kg, input voltage: 400 V, total width: 1,120 mm, total length: 2,130 mm, total height: 1,920 mm, warranty duration: 12 months, AIRCOOLED CHILLER CARRIER 30RB 060R 0337 63.6 KW Cooling capacity: 63.6 kW / 18.08 tons (12/7 — 35°C) Year of manufacture: 2024 Options: Hydraulic module. Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Danfoss DSF130A4ACA (scroll) Type of refrigerant: R32 Number of fans: 1 pcs. (EC-fans) Hydraulic module: 2 pcs. water pump Grundfos AC25-125 (Frequency inverter), buffer tank 208 l. Dimensions: 2.13x1.12x1.92 m Weight: 649 kg Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available Lsdpfxjzxncho Abyehl - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, Item: A-11297-Silostank 95m3 Exterior dimensions: Dia Ø 3300 mm Total H 11647 mm Stainless steel tank - 3 pcs. AISI 304 Outlet height 400 mm Top of the tank: Air in/outlet 500 mm with gauge Ledpfxsua U Hzj Abyohl Inside : polished weld Thickness of plates: Bottom: 4 mm, Cylinder : 4 and 3 mm, Top : 3 mm Possible to choose color of outside plates if you need insulation.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 83 kW (112.85 HP), type of input current: three-phase, type of cooling: air, overall weight: 1,230 kg, input voltage: 400 V, total width: 830 mm, total length: 1,840 mm, total height: 2,030 mm, warranty duration: 12 months, Aircooled chiller KKT cBoxX 90 83 KW Cooling capacity: 83 kW / 23.6 tons (tw2=20°C / tu=32°C ) Year of manufacture: 2021 Options: Hydraulic module Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 2 pcs. Danfoss DSH161A4ALD (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Grundfos ML90HA-J-H3-CML2A + 1 pcs. Grundfos ML132DA-J-H3-CML4A, buffer tank (open-type). Dimensions: 1.84x0.83x2.03 m. Weight: 1230 kg. Working hours: 1/1 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Lhodpfx Aszxc I Sjbysl After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 785 kW (1,067.30 HP), type of input current: three-phase, type of cooling: air, overall weight: 6,190 kg, input voltage: 400 V, total width: 2,330 mm, total length: 8,500 mm, total height: 2,640 mm, warranty duration: 12 months, AIRCOOLED CHILLER EMICON ERAH 8120 MC VS HE KE 785 KW Cooling capacity: 785 kW / 223.2 tons (12/7 — 35°C) Refrigerant circuit: 2 pcs. Heat exchanger: Shell-and-tube Condenser: Microchannel Type of refrigerant: R513А Compressors: 2 pcs. Bitzer CSVH25-160Y-40A (Inverter screw) Number of fans: 14 psc. Dimensions: 8,5 х 2,33 х 2,64 m. Lhsdpezw Udvjfx Abyol Weight: 6190 kg. Working hours: 0/0 h. Condition: Never used, new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 537 kW (730.12 HP), type of input current: three-phase, type of cooling: air, overall weight: 5,481 kg, input voltage: 400 V, total width: 2,250 mm, total length: 5,530 mm, total height: 2,300 mm, warranty duration: 12 months, AIRCOOLED CHILLER CARRIER 30KAV 0550 0038 537 KW Cooling capacity: 537.0 kW / 152.69 tons (12/7 — 35°C) Year of manufacture: 2023 Options: Economizer. Recuperation. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube + 2 pcs. Plate (Economizer) + 2 pcs. Plate (Recuperation) Condenser: Microchannel, Aluminum Compressors: 2 pcs. Carlyle 06ZCE1H3AA06013 (screw, inverter) Type of refrigerant: R134a Number of fans: 6 pcs. (Frequency inverter) Dimensions: 5.53x2.25x2.3 m Weight: 5481 kg Working hours: 971/793 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Lhjdozw H Hcepfx Abyol The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2023, functionality: fully functional, cooling capacity: 520.6 kW (707.82 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,756 kg, input voltage: 400 V, total width: 2,250 mm, total length: 4,850 mm, total height: 2,400 mm, warranty duration: 12 months, Aircooled chiller YORK YLAA0517HE 520.6 KW Cooling capacity: 520.6 kW / 148.03 tons (12/7 — 35°C) Year of manufacture: 2023 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 6 pcs. Bitzer GSD80385VAB462 (scroll) Type of refrigerant: R410А Number of fans: 8 pcs. Dimensions: 4.85x2.25x2.4 m. Weight: 3756 kg. Working hours: 3/2/3/2/2/3 h. Condition: Outlet Lhsdpfozw Eufox Abyol CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, cooling capacity: 308 kW (418.76 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,036 kg, input voltage: 400 V, total width: 2,300 mm, total length: 4,700 mm, total height: 2,100 mm, warranty duration: 12 months, Aircooled chiller LENNOX NAC 300D NM7M 308 KW Cooling capacity: 308 kW / 87.6 tons (12/7 — 35°C) Lhjdpfx Abezw Ep Ajysl Year of manufacture: 2024 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 4 pcs. (3 pcs. COPELAND ZP385KCE-TWD-524 + 1pcs. COPELAND ZP295KCE-TWD-524) (scroll) Type of refrigerant: R410-А Number of fans: 6 pcs. ZIEHL-ABEGG FN080-SDS 6 V7 Hydraulic module: 2pcs. water pump WILO w1121175-2-p190, expansion vessel Dimensions: 4.7x2.3x2.1 m Weight: 3036 kg Working hours: 1/0/0/0 h. Condition: new CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 254 kW (345.34 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,458 kg, input voltage: 400 V, total width: 2,240 mm, total length: 3,050 mm, total height: 2,500 mm, warranty duration: 12 months, heating capacity: 186 kW (252.89 HP), Aircooled chiller/Heat pump YORK YMPA0260PE50 254 kW/186 kW Cooling capacity: 254 kW / 72.22 tons (12/7 — 35°C) Heating capacity: 186 kW / 52.89 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump. Hydraulic module Refrigerant circuit: 4 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 6 pcs. COPELAND ZP143KCE-TFD-423 (scroll) + 1 pcs. HITACHI E855DH-80D2YG (scroll) + 1 pcs. HITACHI DC80PHDG-D1J2 (scroll) Type of refrigerant: R410a Number of fans: 4 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo HED IE5 (Frequency inverter) Dimensions: 3.05x2.24x2.5 m. Weight: 2458 kg. Working hours: 0/0/0/0/0/0/0/0 h. Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Ledpozw Enfjfx Abyshl The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 491 kW (667.57 HP), type of input current: three-phase, type of cooling: air, overall weight: 4,744 kg, input voltage: 400 V, total width: 2,300 mm, total length: 6,700 mm, total height: 2,500 mm, warranty duration: 12 months, heating capacity: 531 kW (721.96 HP), Aircooled chiller/Heat pump PANASONIC ECO I W AQUA EVO 530 H 491 kW/531 kW Cooling capacity: 491 kW / 139.61 tons (12/7 — 35°C) Heating capacity: 531 kW / 150.99 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 6 pcs. Bitzer GSD80385VLB4-2 (scroll) Type of refrigerant: R410a Number of fans: 12 pcs. (EC-fans) Dimensions: 6.7x2.3x2.5 m. Weight: 4744 kg. Working hours: 24/24/24/24/24/24 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Ljdpfx Aszw Egzsbyshl The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 420 kW (571.04 HP), type of input current: three-phase, type of cooling: air, overall weight: 3,955 kg, input voltage: 400 V, total width: 2,300 mm, total length: 5,600 mm, total height: 2,500 mm, warranty duration: 12 months, heating capacity: 451 kW (613.19 HP), Aircooled chiller/Heat pump Panasonic ECO I W AQUA 450 H 420 kW/451 kW Cooling capacity: 420 kW / 119.42 tons (12/7 — 35°C) Heating capacity: 451 kW / 128.24 tons (40/45 —7°C) Year of manufacture: 2025 Options: Heat pump Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 4 pcs. Bitzer GSD80485VLB4-2 (scroll) Type of refrigerant: R410a Number of fans: 10 pcs. (EC-fans) Dimensions: 5.6x2.3x2.5 m. Weight: 3955 kg. Working hours: 6/6/6/6 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Ljdpfx Aszw Ef Debyshl LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.