Used Number Work for sale (71,172)

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, FLOW & THERMAL Regenerative Thermal Oxidizer (RTO), 18,000 Nm³/h (2021) Complete industrial system for the treatment of process water containing Volatile Organic Compounds (VOCs), consisting of stripping columns and a three-chamber Regenerative Thermal Oxidizer. Manufactured by Flow & Thermal Solutions / TECAM in 2021, the equipment was installed at a PET production plant and remained operational until the factory closed on 27 November 2025. The system removes VOCs from the water by means of air stripping and subsequently destroys them in the RTO through high-temperature thermal oxidation. Heat recovery through ceramic media helps reduce natural gas consumption. Main features • Manufacturer: Flow & Thermal Solutions / TECAM • Year: 2021 • Serial number: F002 • RTO nominal capacity: 18,000 Nm³/h • Configuration: three-chamber regenerative RTO • Fuel: natural gas • Honeywell / Eclipse TJ 200 burner • Burner output: 58–586 kW • Electrical supply: 400 V, 50 Hz • Electrical power stated on the nameplate: 40 kW • 30 kW Soler & Palau ATEX main fan • Siemens PLC automation with HMI touchscreen • LEL monitoring, purge, dilution, bypass and pneumatic valve systems • Vertical stack: 10 m high, diameter: 800 mm • CE marked Performance and operation The equipment operated at actual flow rates close to its nominal capacity, with recorded values ranging from approximately 16,400 to 17,900 Nm³/h. The latest available emissions test, carried out by DEKRA in December 2023, recorded the following values: • TOC: 13 mgC/Nm³ • NOx: 3–4 mg/Nm³ • CO: 125–153 mg/Nm³ During the tests, the equipment operated at an approximate temperature of 775–780 °C, with a treated water flow rate of 3.5 m³/h. Stripping columns Fpjdpfx Aaezvcknotjl The system includes: • Original stripping column, designed for approximately 6 m³/h. • Second Tecnium SLFKK9 stripping column, manufactured in PPH, with a nominal capacity of 8 m³/h and a maximum capacity of 10 m³/h. The second column was installed, but it is currently dismantled and lying on the ground after being knocked down by strong winds during the winter. It has a hole in the base which, according to the available information, is considered potentially repairable. The Tecnium column is equipped with internal packing, distributors, a mist eliminator, connections, drainage and provisions for integration with the existing control system. Condition and maintenance The system remained operational until the final closure of the plant in November 2025. The latest preventive maintenance was carried out by TECAM in June 2025 and included mechanical and electrical inspection, burner, fans, stripping columns, instrumentation, valves and functional testing. The equipment was operational, although maintenance work is required before recommissioning, mainly involving: • Process valves • Internal insulation of the towers • Ductwork and seals • Main fan impeller and expansion joints • Repair of the base of the second stripping column TECAM technical documentation is available regarding the recommended works, and several spare parts are also available. Scope of supply The system includes: • Three-chamber RTO • Combustion chamber • Burner and gas train • Main fan • Two stripping columns • Dilution and purge system • Hot bypass • LEL analysers • Stack • Ductwork • Electrical cabinets and controls • Platforms, ladders and support structures • Available spare parts

Condition: reconditioned (used), Year of construction: 2016, operating hours: 345 h, functionality: fully functional, working width: 1,230 mm, area performance: 8,600 m²/h, overall weight: 1,944 kg, warranty duration: 12 months, water tank capacity: 310 l, sweeping width: 1,230 mm, HAKO SCRUBMASTER B310 R CL TB1230 SCRUBBER NEW HAWKER PERFERCT PLUS 36V 640Ah TRACTION BATTERY (8PZS640) NEW NEOS 36V 100A CHARGER Manufactured in 2016 with 345 hours on the clock 1230mm cleaning head (TB1230) equipped with three new medium-hard disc brushes for work on any surface. Integrated pre-sweeper with new side brushes and a new cylindrical brush to remove loose dirt before the actual cleaning. New squeegee blades made of high-quality natural rubber are ideal for use on all surfaces. New protective rubbers around the brush head prevent water from splashing outside the machine's contours. The device is equipped with new, durable drain hoses and a new suction hose. New suction turbines ensure high water suction power from the squeegee blade. Each device we offer has individually taken photos; you get exactly what you see. TECHNICAL DATA: Fodpfoy Ui Aksx Aatepl Working width (mm): 1230 Squeegee width (mm): 1260 Capacity (m²/h): 8600 Voltage (V): 36 Number of disc brushes (pcs): 3 Working speed (km/h): 7 Clean water tank capacity (l): 310 Dirty water tank capacity (l): 310 Weight without batteries (kg): 935 Weight (kg): 1944 Power (kW): 7.6 INCLUDED: NEW HAWKER PERFERCT PLUS 36V 640Ah TRACTION BATTERY (8PZS640) NEW NEOS 36V 100A BATTERY CHARGER NEW pre-sweeper side brushes - MIX antistatic bristles NEW pre-sweeper roller brush - MIX antistatic bristles NEW 430mm PPL 0.5 disc brushes (3x) NEW 36V 600W suction turbines (2x) NEW drain hoses (2x) NEW suction hose NEW head guard rubbers (2x) Squeegee blade with new rubbers Tenzi Normal 5 fluid 1000 liters - FREE KEY FEATURES: The 310-liter tank with a durable, flexible divider allows for large amounts of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (1230 mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: used, Year of construction: 2013, functionality: limited functionality, machine/vehicle number: 105032, Technical characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse in Z: 30 m/min - Standard integrated automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size A5 - Maximum spindle speed: 6,000 rpm - Spindle power (100%/40% duty cycle): 18.1 / 13.9 kW - Spindle torque (100%/40% duty cycle): 77 / 59 Nm Tool Turret with Driven Tools - Tool holders according to DIN 69880: 12 positions - BMT65 Fjdpfx Aasxxwztstopl - Maximum tool length including holder: 190 mm - Maximum tool speed: 6,000 rpm - Maximum torque: 27 Nm (10% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400–480 V, 80 A - Connected load: 27 kVA Dimensions - Overall dimensions: Length = 4,350 mm (with chip conveyor), Width = 1,600 mm, Height = 2,500 mm - Weight: 5,500 kg Main Features and Capabilities: - Vertical Design: Optimised for chip evacuation and easy loading/unloading - Control: GE Fanuc FS 32i B - High Precision: Positioning accuracy on X and Z axes ±0.001 mm, Haidenhain linear scales - Main Spindle: High power output and wide speed range - In-process Control: Marposs T25 measurement probe - Automated Loading/Unloading: Parts are automatically loaded and unloaded by integrated automation - Live Tooling: Capable of drilling and milling with driven tools - Tool Life Monitoring with Sister Tool Management - Chip Conveyor, Coolant System, Switchable Dual Cartridge Filter, High Pressure Pump (15 bar) - Fully Enclosed Work Area, Work Area Lighting - Documentation: Electronic available; paper manual not complete Machine Condition: WORKING - Operator panel safety switch is broken

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 71400, For sale is a RÖSLER Rotomatic R 150/15 SE, including a separation station, conveying technology, control cabinet, and control system. This unit comes from our ongoing production facility and was dismantled solely due to a plant upgrade. The unit is fully functional, ready for immediate use, and can be inspected and demonstrated in operational condition by appointment. Technical data Manufacturer: RÖSLER Oberflächentechnik GmbH Model: Rotomatic R 150/15 SE Machine type: Continuous belt grinding machine Year of manufacture: 2016 Serial number: 71400 Working channel length: 15 m Total power: 17 kW Main drive: 12.5 kW Equipment Complete system including: Rotomatic R 150/15 SE Separation station Workpiece conveyor belt Grinding media return system Control cabinet with PLC control Pneumatic and process water technology Automatic continuous operation Integrated workpiece/grinding media separation Variable processing time Designed for continuous industrial operation Application areas Ideally suited for: Deburring Rounding Smoothing Cleaning Fpodpfjzizu Ejx Aatsl Surface finishing Belt grinding of mass-produced parts Suitable for workpieces made of: Steel Stainless steel Aluminum Brass Zinc die casting Sintered and stamped parts The Rotomatic is particularly suitable for the continuous processing of large quantities and can be easily integrated into automated production lines. The Rotomatic principle ensures that sensitive workpieces are processed particularly gently and according to the first-in-first-out principle.

Condition: excellent (used), functionality: fully functional, working width: 300 mm, brushing unit diameter: 240 mm, total length: 3,600 mm, total width: 1,000 mm, total height: 900 mm, height adjustment type: electric, overall weight: 400 kg, working height: 100 mm, workpiece height (max.): 100 mm, workpiece width (max.): 300 mm, workpiece length (max.): 3,600 mm, WOOD AGING BRUSHING MACHINE | 4 BRUSHES | 300 MM Sanding machine for aged wood JBS MACHINERY PROCHERA! Professional PROCHERA brushing/sanding machine designed for structuring, brushing, and aging wood. The machine features 4 independent brushing units and a conveyor belt with adjustable feed speed. It is a robust industrial design intended for continuous processing of wooden components. This brushing machine is ideal for producing aged boards, wooden flooring, facades, countertops, decorative elements, paneling, and other products requiring the enhancement of the natural wood grain. TECHNICAL DATA - Manufacturer: PROCHERA - Type: brushing/sanding machine for wood structuring - Number of working units: 4 - Number of brushes: 4 - diameter 240mm - Maximum working width: 300 mm - Maximum height of workpiece: 100 mm - Feed speed: 0–23 m/min - Conveyor: belt type - Feed speed adjustment: stepless - Adjustment of working units: independent - Brush working direction: option for co-rotating/counter-rotating operation Gross price including VAT margin or 23% VAT invoice PROCHERA uses various types of brushes in these machines, allowing for both delicate and deep surface structuring. The first units can be equipped with metal brushes for more aggressive grain exposure, and subsequent units can use abrasive brushes for further processing and surface smoothing. The machine is primarily intended for: wood brushing, surface structuring, wood aging, exposing the natural grain pattern, surface preparation before oiling, wood preparation before waxing or varnishing, Fedpfx Aaszxz T Totjpl production of flooring boards, production of facade boards, production of countertops and decorative elements, processing of solid wood. Thanks to the four working units, it is possible to achieve multi-stage surface processing – from a strong opening of the wood structure to its further smoothing and finishing. WHY IS IT WORTH IT? This is a professional machine for companies involved in the production of aged boards, flooring, facades, countertops, and wooden decorative elements. Four working units allow for significantly greater flexibility compared to simple single-unit brushing machines. Adjustable feed allows for the selection of operating parameters for a specific material and desired effect. The machine is ready for further operation. Possibility to view the machine and test its operation after prior contact. JBS MACHINERY JBS MACHINERY GROUP Sp. z o.o. New and used woodworking machines Professional wood processing equipment Possibility to arrange transport in Poland and Europe. We invite you to contact us regarding price, additional photos, a video of the machine in operation, and details regarding transport.

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 46003, Technical characteristics: Work Area # Maximum diameter of the clamping plate: 220 mm # Maximum turning diameter: 170 mm # Maximum machining diameter: 170 mm # Maximum workpiece length: 100 mm Fpedpfx Ajxw Ub Isatol # X-axis travel: 495 mm / Rapid feed in X: 48 m/min # Z-axis travel: 250 mm / Rapid feed in Z: 30 m/min # Standard enclosed automation (number of loading stations by workpiece diameter: 14/(80–200 mm), 18/(30–160 mm), 30/(30–85 mm)) Main Spindle # Spindle interface to DIN 55026: Size A5 # Maximum speed: 7000 rpm # Power at 100% duty cycle: 23 kW # Torque at 100% duty cycle: 130 Nm Powered Tool Turret # Turret type: VDI40, Siemens drive 0.5.435.220, Manufacturer: Sauter # Number of stations: 12 # Maximum speed: 4000 rpm Electrical Equipment # Operating voltage: 400 V, fuse protection 80A GL # Connected load: 41 kW Dimensions # Total dimensions: Length = 3913 mm, Width = 2160 mm, Height = 2955 mm # Weight: 6500 kg Main Features and Capabilities: # Vertical design: Optimal chip evacuation and easy loading/unloading # CNC control: Siemens 840D SL # High precision: Positioning in X and Z axes via Heidenhain linear encoders # Main spindle - Manufacturer: Weiss, providing high power and wide speed range # Automated loading/unloading: Integrated automation supplies and removes parts # In-process probe: Marposs T25 # Live tooling: Allows drilling and milling operations in addition to turning # Chip conveyor: Knoll # Coolant filtration and cooling: Knoll KF150/950 paper filtering unit # Fire suppression system: Kraft & Bauer # Electrostatic oil mist filter: IF Vario EC1500 Machine status: WORKING

Condition: like new (used), Year of construction: 2023, Technical data: Double bending machine Working length: 8200 mm Bending capacity: 2.5 mm CNC control Sheet metal cutting device Fpedpfjzz Adfex Aatel Back gauge depth: 1250 mm Bending accuracy: +/- 0.5° Bending range: 140° Multi-zone crowning system Bending die width: 10/20 mm Number of gripper fingers: 9 pcs. CE marking Dimensions (length x width x height): approx. 10200 x 2300 x 2150 mm Weight: approx. 12.5 tons Accessories: Sheet metal cutting device Hydraulic unit with oil cooler Bending die lighting Various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Condition: overall in new condition

Condition: used, Year of construction: 2017, machine/vehicle number: 17200241, usable tank capacity: 40 l, cooling capacity: 1.6 kW (2.18 HP), input voltage: 400 V, total width: 590 mm, total length: 949 mm, total height: 1,292 mm, Used Tradilevain TL-40 sourdough fermenter, designed for the preparation, storage, and regular management of sourdough in a professional bakery. Maximum usable capacity of 40 L, ideal for artisan bakeries, production laboratories, and bakeries using natural sourdough daily. Tank volume of 80 L with a maximum total capacity of 50 L, allowing for comfortable handling of sourdough preparations. Minimum usable capacity of 20 L and minimum total capacity of 25 L, practical for adjusting production according to the bakery's actual needs. 2 drain taps to facilitate draining, cleaning, and daily use of the sourdough. Loading height of 1120 mm, designed for ergonomic use in a professional laboratory. Compact dimensions: 590 x 949 x 1292 mm, allowing for easy integration into a bakery production space. 400 V power supply with a power of 1.6 kW, suitable for a professional three-phase installation. Weight of 200 kg, guaranteeing a robust and stable construction for regular use in a commercial environment. Year 2017, serial number 17200241, reference TL-40. Used professional equipment, suitable for bakers who wish to integrate or develop sourdough production with specialized equipment. Ideal solution for Proculis: a reliable, compact, and functional sourdough fermenter to improve work organization and consistency of preparations. Used Tradilevain TL-40 40 L sourdough fermenter Fjdpozyqqqjfx Aatjpl The used Tradilevain TL-40 sourdough fermenter is a professional piece of equipment intended for bakers, pastry chefs, and production laboratories who wish to work with natural sourdough with more regularity, comfort, and organization. Thanks to its maximum usable capacity of 40 liters, it allows for the preparation and storage of a quantity adapted to the daily needs of an artisan bakery or a professional production facility. This model is particularly interesting for professionals who want to incorporate sourdough into their range of breads, improve the consistency of their preparations, or optimize fermentation monitoring. Its compact size, 80-liter tank, and two drain taps make it a practical solution for managing sourdough on a daily basis. Product: used professional sourdough fermenter Brand: Tradilevain Reference: TL-40 Maximum usable capacity: 40 L Minimum usable capacity: 20 L Maximum total capacity: 50 L Minimum total capacity: 25 L Tank volume: 80 L Number of taps: 2 drain taps Loading height: 1120 mm Dimensions: 590 x 949 x 1292 mm Voltage: 400 V Power: 1.6 kW Weight: 200 kg Year: 02/17/2017 Serial number: 17200241

Condition: used, Year of construction: 1997, used good condition low mileage cleaned functionally tested partially refurbished completely adjusted Includes 1 sanding unit Combination unit with electronic shoe Dust brush Manufacturer: Bütfering Type: ECO e1100 Fjdpezkvy Esfx Aatopl Year of manufacture: 1997 Machine no.: 34546 Working width approx. mm: 1100 Passage height approx. mm: 150 CE type-tested Number of units: 1 Belt dimensions l x w mm: 1120 x 1900 Feed speed m/min: 4 + 8 Calibrating roller Grooved Rubberized Combination unit kW: 11 Electronic segmented shoe Dust extraction connection mm: 180 + 140 Space requirement approx. L x W x H mm: 1700 x 1700 x 2000 Weight approx. kg: 1500 Location: 97447 Gerolzhofen, free loading, unpacked Handover in as-is condition, as inspected, without warranty and guarantee

Condition: excellent (used), Year of construction: 2008, operating hours: 1,712 h, General information Year of manufacture: 2008 Technical information Drive: Wheel GVW: 6.543 kg Dimensions (LxBxH): 531 x 119 x 205 cm Functional Mast: articulated arm Lifting capacity: 227 kg Working height: 1.089 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Additional information Please contact Ton for more information Manufacturer: Genie Type: Z30/20N Year of manufacturing: 2008 Weight: 6543 KG Hourmeter: 1712 Fjdpfx Asy H Dguoatjpl Drive: Electric, 4x2 Product number: 26008 Platform height: 8,89 m Working height: 10,89 m Platform measurements: 76x117 cm Maximum outreach: 6,25 m Total measurements LxWxH: 531x119x205 cm Max. platform load: 227 KG Machine is technically in good condition. Fitted with good batteries. Documents incl. CE. Price: € 10.950,- excl. VAT, available from our warehouse in Hedel, The Netherlands. Delivery/transport is possible, ask for price. Keywords: Hoogwerker Schaarlift Schaarhoogwerker Telescoophoogwerker Knikarmhoogwerker Genie JLG Haulotte Skyjack Upright Manitou Hinowa Niftylift Aichi Snorkel Omme Scissorlift Boomlift Articulated Platform Arbeitsbühnen Scherenbühne

Condition: repair required (used), Year of construction: 2005, functionality: not functional, machine/vehicle number: LZ1R0725, Technical specifications: Work Area - Maximum turning diameter: 89 mm - Maximum workpiece length: 80 mm - Chuck size: 152 mm hydraulic - Maximum workpiece weight: 0.7 kg (per piece, 2 pieces) - X-axis travel: 245 mm / Rapid traverse X: 20 m/min - Z-axis travel: 240 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: ASA 6 - Maximum speed: 60–6000 rpm - Power at 100% duty cycle: 7.5 / 5.5 kW Tool Turret with Motorised Tools - Tool interface: 20 mm square / 25 mm hole diameter - Number of positions: 12-station lower turret, 6 driven stations - Max. speed: 4500 rpm, Milling motor power: 4.5 kW - Turret index time: 0.2 sec Electrical Equipment - Operating voltage: 200V (3-phase) - Connected load: 21 kVA Dimensions - Machine size (L×W×H): 2,100 × 1,555 × 1,680 mm - Weight: 4000 kg Main Features and Capabilities - Horizontal layout: Optimum chip evacuation, parts catcher, custom-made parts conveyor belt - CNC control: Fanuc Series 21i TB - Chip conveyor Machine Status: NOT WORKING - Servo drive defective Fodpfx Aaexxkn Tjtspl - Main spindle motor defective

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 03-2018, For sale: perfectly preserved and fully operational semi-automatic flexo printing machine for corrugated board, manufactured by the renowned EMproject 89. Built in 2018, this machine is designed for reliable and precise 2-color printing on cardboard packaging. The machine is currently connected to power, fully functional, and ready for work. It is ideal for printing logos, barcodes, and graphics on shipping, industrial, or transport boxes in a single pass. Key Technical Specifications: Fpodpfx Aajzilvgjtsl Manufacturer: EMproject 89 (Serbia) Model: FLEXO PRINTER MS-1700/1400 Year of Manufacture: 03 / 2018 Number of Colors: 2 (Two-color printing) Maximum Cardboard Format: 1700 mm x 1400 mm Voltage: 220 V Condition: Fully operational, well-maintained, testing possible before purchase. The machine is located in Slovenia (Celje region). The buyer is responsible for dismantling and transport. Price is negotiable for serious buyers upon inspection. We also have other cardboard manufacturing equipment available printing machine (Flexo Printer EMproject 89), automatic paper slitting and rewinding machine YYS-I ( 2023), automatic folder gluer machine for corrugated boxes by HEBEI SOOME built in 2019, fully automatic folder gluer with bottom-locking capability by HEBEI SOOME ( 2024) and semi-automatic folder gluer machine for corrugated boxes, manufactured by HEBEI SOOME (2021) are also available for sale.

Condition: used, Year of construction: 2014, Machine design: Continuous/Reciprocating Working area in X-direction: 1000 mm Working area in Y-direction: unlimited Working thickness (Z-dimension): 60 mm Number of main spindles: 1 Main spindle power: 3.3 kW Clamping system: HSK-63 F Tool changer: Pick-up tool changer Number of tool change stations: 3 Back wall grooving units: fixed in the Y-direction Vertical drilling spindles - in the X-direction: 5 Vertical drilling spindles - in the Y-direction: 5 Spindle speed, vertical drilling spindle: 4000 rpm Horizontal double drilling spindle in the X-direction: 2 Horizontal double drilling spindle in the Y-direction: 1 Spindle speed, horizontal drilling spindle: 4000 rpm Fodpfx Aajzndmhotepl Monitor size: 17" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: Masterwork DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table design: Fixed table with rollers Weight approx.: 1300 kg Dimensions: 2200x2470x1590 mm Location: Customer

Condition: used, Year of construction: 2007, fuel type: electric, color: grey, Empty weight: 2.330 kg Dimensions (LxBxH): 251 x 120 x 223 cm - Year: 2007 - Documentation available: Yes - CE marking present: Yes - Drive type: Elektric - CE certificate present: No - Serial number: CW133041 - Working height [mm]: 8140 Fpjdpfsyvf Udox Aatel - Platform height [mm]: 2230 - Platform capacity [kg]: 450 - Transport dimensions: 2510mm x 1200mm x 2230mm (l x w x h) - Transport weight [kg]: 2330kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Koen van Lent

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,000 h, AMV 7450D SHOTCRETE ROBOT – DISMANTLED SHOTCRETE APPLICATION UNIT – 2012 For sale: a professional, dismantled AMV 7450D Shotcrete Robot application unit, designed for wet-mix shotcrete application. Fpodpfx Aaezw T Sxjtjl The unit was manufactured by the renowned Norwegian company AMV Andersen Mek. Verksted AS, which specializes in the design of machinery for tunnel, mining, and underground operations. IDENTIFICATION DATA: * Manufacturer: AMV Andersen Mek. Verksted AS, Norway * Model: AMV 7450D Shotcrete Robot * Year of unit manufacture: 2012 * Serial number: 12-0070 * Year of base vehicle manufacture: 2012 * Original chassis: Mercedes-Benz Actros * Type: mobile shotcrete robot * Application technology: wet-mix method * Number of operators: 1 * Operating voltage: 400 V AC * Permissible/technical weight as indicated on the AMV nameplate: 44,500 kg – parameter related to the complete machine configuration * Current condition: unit is dismantled from the chassis KEY OPERATIONAL PARAMETERS: * Maximum concrete pump output: up to 25 m³/h * Vertical reach of the boom: approximately 13.7 m * Horizontal reach of the boom: approximately 13.7 m * Working material: shotcrete * Operating method: wet-mix shotcrete application * Working system: specialized tunnel boom with spray nozzle * Unit power supply: 400 V AC * Water tank: capacity to be confirmed * Operating pressure of the system: to be confirmed based on technical documentation * Actual weight of the dismantled unit: to be confirmed DEVICE DESCRIPTION: The AMV 7450D is a specialized shotcrete robot designed for efficient and precise application of concrete in challenging underground environments and on large infrastructure projects. The extended working boom allows for shotcrete application at height and in hard-to-reach locations that are inaccessible to conventional concrete pumps. The output of up to 25 m³ of concrete per hour enables efficient execution of large areas and work requiring rapid ground stabilization. The machine is designed to be operated by a single operator. This solution reduces the number of workers in the immediate shotcrete application zone, improving safety and control over the process. * construction of concrete tunnel linings, * shotcrete application in road and railway tunnels, * mining and quarrying operations, * reinforcement of underground excavations, * securing rock walls and ceilings, * ground stabilization after excavation, * reinforcement of shafts and underground chambers, * construction of subways and other underground structures, * stabilization of slopes and embankments, * execution of landslide protection measures, * geotechnical works, * protection of foundations and deep excavations, * reinforcement and repair of concrete structures, * repair of dams, canals, and other hydraulic structures, * protection of rock surfaces against spalling, * work on hydroelectric power plants and technical tunnels, * execution of specialized infrastructure contracts. The equipment is intended primarily for tunnel, mining, geotechnical, construction, and hydraulic companies, as well as companies engaged in the repair and modernization of specialized AMV machinery. Additional photos, videos, nameplate photos, and information regarding the included equipment can be provided. Please feel free to contact me for further information and to arrange a viewing.

Condition: good (used), Year of construction: 2000, functionality: fully functional, power: 10 kW (13.60 HP), spindle mount: MK 6, height adjustment type: electric, total width: 11,000 mm, total length: 28,300 mm, total height: 31,600 mm, throat depth: 1,680 mm, overall weight: 5,700 kg, drilling capacity: 75 mm, quill stroke: 400 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 10 rpm, Radial drilling machine WRA 632 economic. Year of manufacture: 2000. Manufacturer: H. CEGIELSKI PL. Morse taper 6. Arm length 1600 mm, Max drilling diameter in steel – 65 mm, in cast iron 75 mm, Max tapping diameter in steel – M56, in cast iron M68, Fedpfx Aaetp Swwstjpl Spindle diameter 100 mm, Spindle travel 400 mm, Number of spindle speeds: 12, from 10–1600 rpm, Number of feeds: 8, from 1.14–2.04 mm/rev, Spindle reach from column: min 335 mm, max 1600 mm, Distance from spindle to base: min 390 mm, max 1680 mm, Base working surface 1760 x 1020 mm, Worktable (cube) dimensions 750 x 500 x 1200 mm, Overall dimensions (height x length x width) 3160 x 2830 x 1100 mm, Weight 5700 kg, Total power requirement 10 kW.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 4633, total width: 1,800 mm, total length: 10,000 mm, total height: 2,140 mm, Working machine in exellent condition from German production System consists of 1 x Honsel type: F13, serial number: 4633 1 x Fischer & Kreck, type Combi C/11B Production speed of 180 pieces per minute and runs with a voltage of 400 V. Overall dimensions: approx. 1000 x 180 x 214 cm (L/W/H) including 1 x Gluematick type: GHK, 1 x cabinet with contents and accessories Fpjdjzhk Avopfx Aatjl

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, VEMAG HP20E + LPG209 + AH212 | Sausage filling, linking and hanging line Fpodpfjzhgyksx Aatel Vacuum filler with integrated butcher's lift: Manufacturer: VEMAG Maschinenbau GmbH Model / Type: HP20E Serial number: 1631079 Year of manufacture: 2017 Power supply: 480 V, 38 A, 3 Ph, 50/60 Hz Weight: 1400 kg Dimensions: 1800 x 1500 x 2000 mm Equipment: Integrated vacuum pump, mast-type loading lift for standard butcher's trolleys (carts) with a capacity of 200 liters Automatic linker: Manufacturer: VEMAG Maschinenbau GmbH Model / Type: LPG209 Linker Serial number: 2090310 Year of manufacture: 2017 Power supply: 400 / 460 V, 18 A Power: 5.5 kW Working air pressure: 6 bar Weight: 657 kg Dimensions: 1700 x 1100 x 1600 mm Hanging line (automatic hanger): Manufacturer: VEMAG Maschinenbau GmbH Model / Type: AH212 Hanging Machine Serial number: 2120577 Year of manufacture: 2017 Power supply: 400 - 460 V, 3 Ph, 50/60 Hz Power: 0.5 kW Weight: 298 kg Dimensions: 4000 x 800 x 1500 mm Vemag is the undisputed global leader in portioning technology, and the presented set is a fully automated industrial line designed for the mass production of sausages, frankfurters and other products in natural, collagen and artificial casings. The heart of the set is the reliable Vemag HP20E vacuum filler, based on a proven system of conveying screws. The machine guarantees extremely gentle handling of the filling, eliminating smearing of fat and the formation of air bubbles inside the product. The integrated mast lift for 200 l trolleys drastically reduces downtime, ensuring a smooth supply of raw material to the hopper. The second key element of the line is the technically advanced Vemag LPG209 linker. This device eliminates the traditional bottleneck in meat production – it automatically and with surgical precision portions and links the sausages, maintaining the identical weight and length of each section. Thanks to its unique gripper system, the linker minimizes casing breakage even at extremely high operating speeds, which translates into real savings of raw materials. The final link in the system is the Vemag AH212 automatic hanger. It picks up the formed portions directly from the linker, arranges them in perfect loops and precisely hangs them on the transport hooks of the hanging line. These prepared batches of product are immediately ready to be manually or automatically transferred to smoking sticks. The entire set is fully synchronized electronically, creating a monolithic production unit managed from a single level, ideal for medium and large meat processing plants, butcher shops and industrial-scale slaughterhouses.

Condition: excellent (used), Year of construction: 2017, operating hours: 4,487 h, functionality: fully functional, Robot, cobot, Universal Robots UR5, complete, approximately 4487 operating hours. Year of manufacture: 11/2016 Serial number: 2016353688 Number of axes: 6 Max. payload: 5 kg Max. working range: approx. 850 mm Scope of delivery: Robot, controller, cables, teach pendant Used item – shows normal signs of wear and tear. Further details, article numbers, and images available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT clearly stated. Collection on-site in 74722 Buchen/Hainstadt. Fodszmt Raepfx Aatopl Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries available upon request – Please specify the country, city, and postal code. Freight costs available upon request – Please specify the delivery address.

Condition: good (used), Year of construction: 2003, functionality: fully functional, SAACKE UWIE – 5-axis CNC tool grinder, year 2003 We offer for sale a universal SAACKE UWIE CNC tool grinder, designed for the production and sharpening of rotary cutting tools. The machine is particularly suitable for grinding and sharpening milling cutters, drills, stepped tools, shaped tools, and other precision rotary tools. Technical data: Manufacturer: Gebr. Saacke GmbH & Co., Germany Type: UWIE Serial number: UWIE/209804 Year of manufacture: 2003 Design: CNC tool grinder CNC-controlled axes: 5 axes Power supply: 400 V / 3 AC / 50 Hz Rated machine power: 20.5 kW Rated current: 36 A Fuse rating: 50 A PC/CNC control with monitor, keyboard, and mouse CNC rotary work spindle Multi-axis tool grinding ELBARON dust extraction system Fpjdpfx Aaszx Uu Dotel The machine is designed for precise CNC grinding and sharpening of tools and enables complex machining of tool geometries in a single setup. Inspection and testing of the machine in operation are possible.

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 3,715 h, machine/vehicle number: S4513-18437, power: 35.8 kW (48.67 HP), load capacity: 227 kg, mast type: free lift with telescopic boom, lifting height: 13,720 mm, platform length: 2,440 mm, platform width: 910 mm, overall weight: 7,037 kg, empty load weight: 6,811 kg, transport length: 8,480 mm, transport width: 2,300 mm, transport height: 2,490 mm, construction height: 2,490 mm, next inspection (TÜV): 02/2026, fuel type: diesel, fuel tank capacity: 125 l, tire condition: 80 %, Equipment: all wheel drive, Genie S45 Telescopic Boom Lift Swing arm, diesel, 4x4, 16 m Technical Features Chassis and Engine Engine: Deutz D2011L03i: air/oil-cooled 3-cylinder diesel engine Fuel tank capacity: 125 l Power: 35.8 kW Travel speed: 1.1 km/h (working) - 7.1 km/h (road) Gradeability: 40% Tilt angle: 4.5° Turning radius (inside/outside): 2 m / 4.78 m Dimensions and Performance Overall dimensions (L x W x H): 8.48 x 2.3 x 2.49 m Platform dimensions (L x W): 2.44 x 0.91 m Empty weight: 6,811 kg Max. outreach of the turntable counterweight: 0.86 m Lifting structure and performance Platform load: 227 kg / number of people: 2 Platform height / working height: 13.72 m / 15.72 m Maximum outreach: 11.18 m Swing arm inclination: 135 ° Negative height: -1.5 m Turret rotation: 360 ° Platform rotation: 160° Allowable lateral force: 400 N Max. wind speed: 12.5 m/s Equipment Active swing axle Telescopic swing arm Non-marking tires Safety Tilt limiter with tilt interlock Overload limiter with overload interlock Electric emergency pump for emergency lowering Reversing warning Fpsdpfx Ajza Tu Hsatsl The telescopic boom lift shows signs of use, but is in perfect technical condition. Despite our best efforts, errors in the advertisement cannot be ruled out. Vehicle inspection only by telephone appointment. Further details are available by phone at +49 160 99188290

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: MW141, Technical characteristics: Work area # Maximum turning diameter: 300 mm # Maximum workpiece length: 276 mm # X-axis travel: 250 mm / Rapid traverse X: 24 m/min # Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min # W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle # Spindle mount: A2-8 # Maximum spindle speed: Left 3000 rpm # Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW # Max workpiece diameter over bed: 520 mm # C-axis indexing accuracy: 0.001° # Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: # Spindle speed: 6000 rpm # Max bar diameter: 53 mm # C-axis indexing accuracy: 0.001° # Travel: 520 mm Motorized Tool Turret # Tool interface: Okuma interface # Number of stations: 12-position lower turret, all stations powered # Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical equipment # Supply voltage: 400V 3-phase # Connected load: 22.5 kVA Fodpfx Aoxxifkjatspl Dimensions # Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm; Weight: 5500 kg Main features and capabilities: # Horizontal design: optimal chip evacuation, parts catcher + custom parts conveyor belt # Additional coolant tank with 10 bar pressure for cutting tool cooling # CNC control: OSP-P300L-R # Chip conveyor # Fire protection system # Tool measuring system (Q SETTER) # Broken tool detection: Load force auto-learning analyzer managed by OSP-P300L-R # Workpiece detection on counter-spindle: Low-pressure compressed air sensors # Spindle cooling system # Documentation: Available electronically and as hardcopy Optional: Bar feeder: FMB model Turbo 10-72XT/3200/A # Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine status: In operation

Condition: repair required (used), Year of construction: 2006, functionality: not functional, machine/vehicle number: 00592, Technical Specifications: Work Area - Maximum clamping plate diameter: 200 mm Fpsdpoxwlbxefx Aatsl - Maximum machining diameter: 130 mm - Maximum workpiece length: 110 mm - X-axis travel: 400 mm / Rapid traverse X: 60 m/min - Z-axis travel: 200 mm / Rapid traverse Z: 30 m/min - Standard closed automation (number of loading stations by workpiece diameter): 14/(80...200 mm), 18/(30...160 mm), 30/(30...85 mm) Main Spindle - Spindle to DIN 55026, Size 6 - Maximum speed: 7,500 rpm - Power at 100%/40% duty cycle: 18 / 27 kW - Torque at 100%/40% duty cycle: 202 / 303 Nm Tool Turret with Driven Tools - Tool shank DIN 69880: 12x VDI40 - Number of turret stations: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6,000 rpm - Maximum torque: 37 Nm (10% DC), 26 Nm (25% DC), 14 Nm (100% DC) Electrical Equipment - Operating voltage: 3x 400–480 V, 50A - Connected load: 31 kW Dimensions - Overall dimensions: L = 2,680 mm (3,820 mm with chip conveyor), W = 2,040 mm, H = 2,400 mm - Weight: 5,500 kg Main Features and Capabilities: - Vertical design for optimal chip evacuation and easy loading/unloading - Control: GE Fanuc Series 18i-TB - High precision: Positioning accuracy in X, Z, and Y axes ±0.001 mm with Heidenhain linear scales - Main spindle: High power and wide speed range - Automated loading/unloading: Integrated automation for part feeding and removal - Driven tools: Enables drilling and milling operations - Chip conveyor - Documentation: Electronic documentation unavailable, hardcopy/manual available Machine Condition: NOT OPERATIONAL - Driven tool motor defective - Driven tool gearbox defective

Condition: excellent (used), Year of construction: 2013, machine/vehicle number: AE/033731, functionality: fully functional, cutting height (max.): 60 mm, saw blade diameter: 300 mm, rotational speed (min.): 4,650 rpm, overall weight: 3,006 kg, table height: 950 mm, Panel Saw – Technical Specifications Regarding the Casadei Busellato AXO 200 automatic panel saw, its key technical specifications are as follows: Parameter Value Cutting length 3800 Max. blade extension 60 mm Main motor power 9 kW Scoring saw motor power 1.3 kW Number of clamps (standard) 6 Main blade diameter 300 mm Scoring saw diameter 160 mm Main blade rotation speed 4650 rpm Scoring saw rotation speed 5850 rpm Work table height 950 mm Zebra GK4 20T label printer The machine is designed for cutting: MDF, Fpodpfjzkbhzox Aatol particleboard, plywood, laminates, and other wood-based materials. The structural features include a rigid steel frame, a CNC-controlled automatic pusher, an air cushion table that facilitates the movement of panels, and the possibility of expansion with additional clamps and cut optimization. The saw will be in continuous operation on a part-time basis (1/4 of full-time) until the end of October 2026. Assistance will be provided with loading the saw. Disassembly for transport: 500 Euros. Loading onto a truck: 300 Euros.

Condition: excellent (used), Year of construction: 2001, CATALOGUE NO. 7089 TECHNICAL DATA - Loading hopper inlet 1020x1230mm - Rotor working width 1020mm - Rotor diameter 348mm - Main motor 22kW, 400V, 50Hz - Pump motor 0.75kW - Number of knives: 50 pcs - Knife size: 35x35x20mm - Sieve: 12mm - Hydraulic pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg ADVANTAGES – Auto-reverse Fjdpfjztau Sex Aatspl – Similar to WEIMA WL 10 – German made – Pusher drawer – Very good condition – Used shredder, DTR+CE documentation Net price: PLN 99,900 Net price: EUR 23,790 based on exchange rate 4.2 EUR (Prices are subject to change with major fluctuations)