Used Offset Printing Press for sale (14,697)

Condition: excellent (used), Year of construction: 2005, Our Polly Prestige 674+L machine for sale! Features: Year of manufacture: 2005 Dksdpfx Ameypardj Tsp 6 printing units and one varnishing unit Max paper size: 520 x 740 mm (B2) Number of impressions: 55 million Alcohol dampening Technotrans system High delivery and non-stop feeder Graficontrol (register, ink zone, dampening) Autoplate Washer (ink rollers) Grafix IR dryer Powder spray system Techkon densito connected to the control panel CIP 4 system Supplied with plate punch and bender The machine has not been in production for a year; according to my tests, the rubber rollers are in 60% condition. The cylinders are undamaged. Testing is possible; however, there is no longer staff or auxiliary materials for printing, so only a paper-feed test is available. The machine is located in Hungary.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, color channels: 4, Approx. 86 million impressions CX version nonstop feeder straight print 4+0 manual plate auto wash auto register KBA RapidDry Coating Dkedpjyr N D Usfx Am Tsp Grafix powder In production Available July/August 2026

Condition: excellent (used), Year of construction: 1998, Linotype Herkuless film imagesetter with Glunz + Jensen 860, online film processor Djdpeym Damsfx Am Tekp -Bridge -Delta Tower -RIP software installed on PC -with spare parts package. Fully operational and ready for use.

Condition: used, Selling as a package Dominant 715, Dominant 547 & PlateRite CTP Please see out other adverts to see the other machines. Dksdpfxewxtrqo Am Tsp One color offset. Format A2

Condition: good (used), Selling as a package Dominant 547, Dominant 715 & CTP machine. Please see out other adverts to see the other machines. Dksdoycc Hkspfx Am Tep

Condition: like new (used), Year of construction: 2019, operating hours: 66 h, functionality: fully functional, Size 60 x 75 cm, Presscenter XL 2, program-controlled wash-up device for inking rollers, blanket wash, and impression cylinder wash, Alcolor Vario dampening system, Combistar air-cooled cooling and recirculation unit, Autoplate, antistatic device in the feeder, double sheet detector, Weko AP 262 powder spray unit, AMS LED UV dryer, maximum paper thickness 0.8 mm, maximum speed 15,000 sheets/h, perfecting 2-3 or 5- Dkodpfx Asykr Rzsm Tjp

Condition: ready for operation (used), Year of construction: 1997, 8-Farb-Bogen-Offset 8-col.sheet-fed offset presses Built in 1997 Size max 520 x 740 mm min 210 x 280 mm Image area max 510 x 740 mm Dksdpfxeygwbde Am Tjp Speed max 15.000 c/h Pile height feeder 945 mm Pile height delivery 1.000 mm

Condition: excellent (used), Year of construction: 1999, KBA COMET Dkodeyq N Ecepfx Am Top Year: 1999 Newspaper page (broadsheet): 420 × 578 mm Magazine page (tabloid): 289 × 420 mm Newspaper page layout format: 395 × 553 mm Max speed: 30,000 cylinder rev./h Cut-off length: 578 mm Cylinder circumference: 1,156 mm Paper web width (standard): 840 mm / 420 mm Maximum web width: 840 mm Minimum web width: 685 mm Paper web speed: 9.63 m/s 6 printing units Output: 64 pages per cycle technotrans ink tank conveyors stacker Gammerler KL513/1 4x Amal AR60

Condition: excellent (used), Year of construction: 2017, operating hours: 86 h, functionality: fully functional, machine/vehicle number: 5180, Size 63 x 92 cm, V-type feeder, Suction tape feeder board, Preset sidelay, Paper size preset, Ryobi fully automatic plate changers, Plate register remote control, Ryobi PCS-G printing control, PDS-E spectrojet, Ryobi D-matic alcohol dampening system, Ink roller temperature control, Automatic blanket wash, Automatic roller wash. Dksdpfx Amswzvzmo Tjp

Condition: excellent (used), Year of construction: 1996, functionality: not functional, machine/vehicle number: 1439, Size 36 x 52 cm, standard dampening, N+P unit Dksdpfxjx I A Rue Am Tep

Condition: like new (used), Year of construction: 2017, operating hours: 57 h, functionality: fully functional, machine/vehicle number: LS001402, FULL UV Size 53 x 75 cm, Anicolor, Wallscreen K Press Center XL 2, Alcolor VARIO dampening system, Combistar cooling and recirculation unit, Inking unit temperature control, Water-cooled machine, Autoplate PRO, Blanket wash, Roller wash, Impression cylinder wash, Coating unit, 2x UV interdeck dryer, 1 x UV end dryer, Powder spray, Extended delivery X2 module, Sheet brake, FOIL Print kit, Airstar Pro, Cleanstar Steel plate in feeder and delivery Dedpfx Amex An Urj Tekp

Condition: ready for operation (used), functionality: fully functional, Submitting a bid obligates you to collect the items on time by 31 December 2025! The offer includes: Web offset printing press with cutting unit Edelmann Graphics Webprint 48 Five (Serial No.: 6160-64, Year of manufacture: 2004) Sorting unit Edelmann Graphics HS (Serial No.: B-534, Year of manufacture: 2004) Extraction system incl. piping, frame Roll collator Rotatek Model RC2 (Serial No.: 007, Year of manufacture: 1994) Djdpfxsxyh Rhj Am Tjkp Note: The green unit outside is not included in the system.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: n.n.b., color channels: 2, paper weight (min.): 40 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, paper height (min.): 900 mm, paper height (max.): 370 mm, total length: 2,700 mm, total width: 2,034 mm, total height: 1,720 mm, space requirement length: 3,700 mm, space requirement width: 3,000 mm, space requirement height: 2,220 mm, counter reading (black): 1,150, type of input current: AC, input current: 16 A, input voltage: 20,02,10,220 V, Equipment: documentation/manual, Hans Gronhi GH522 Purchased from the second owner, who had taken over the company from the first buyer. This second owner never reinstalled the machine in their print shop; it was stored in a corner for about four years. Recently, I acquired this machine together with some other equipment. To ensure the memory card and electronics were still functioning, I tested the machine with plain paper. All functions operated correctly: press on/off, photocells, and other controls. A video of the test run can be sent via WhatsApp or downloaded from my Dropbox. Unfortunately, Machineseeker does not allow me to share such links directly via their platform. If required, I will try to contact you via WhatsApp using your phone number. More photos with big data also available. Machine details: Type: Hans Gronhi GH522 Serial number: currently unclear (to be checked once in warehouse) Year of manufacture: 2010 (based on PCB markings, see photos) Delivered to first owner: March 2012 Total impressions: to be verified after arrival in warehouse (estimated under 15 million) Max. sheet size: 520 x 370 mm Min. sheet size: 148 x 100 mm Plate size: 520 x 370 mm Dimensions (L × W × H): 170 × 203 × 165 cm (including steps) Weight (incl. packing): approx. 4,200 kg Condition: To be dismantled coming week and then transported to our warehouse in Son en Breugel, The Netherlands (zip code 5692 CC). Very good and clean condition. Rubber rollers are mostly original, with approx. 50–60% life remaining. Mainly printed 2-colour jobs, so rollers have not been washed excessively. No damages on cylinders, gears, or bushes. Well maintained, never involved in accidents. Features: Stream feeder with suction belt feed board Mechanical and ultrasonic double-sheet detection Mechanical pull side lays Continuous monitoring at front lays Semi-automatic plate loading with pre-load facility Automated ink sweep with pre-inking facility Precision laser-cut segmented ink keys Automatic roller wash (programmable) Continuous dampening system with oscillating bridge roller and pre-damp facility Optional integrated or separated dampening during production Speed-compensated dampening Automated refrigeration/recirculation/dosing unit BEIERXIN (1 unit) Cylinder movement: circumferential, lateral, and diagonal Quick-release blanket clamping Touch screen controls Programmable pre-dampening cycle Powder spray unit with heated reservoir and vibration Dkjdpow R Enmjfx Am Tep Three motorised suction slow-down devices Sheet de-curler Air shower in delivery Central oil lubrication system Pneumatic controlled operation (small compressor included) Seperate stand alone PUNCHING unit included Packing & delivery: Machine will be professionally packed and strapped on a heavy duty pallet and additional equipment on EURO palletboxes Loaded on your transport Pricing & conditions: Fixed price: € 12,000 LOT (Loaded on Transport, Incoterms). Down payment: 20% (€ 2,400) as deposit. Proforma invoice: Deposit invoice valid for 5 working days. Please supply full company details to issue the invoice.

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) Dsdpfx Ajuf Sy Asm Tekp - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: used, functionality: fully functional, color channels: 2 kleuren rechtdoor, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 100 mm, paper height (max.): 365 mm, total length: 2,765 mm, total width: 1,523 mm, total height: 1,560 mm, space requirement length: 2,765 mm, space requirement width: 1,523 mm, space requirement height: 1,560 mm, type of input current: three-phase, input current: 20 A, input voltage: 200 V, Equipment: documentation/manual, 2-colour offset press in high-quality construction with hardened and ground gears, cylinders run in class P5 pre-stressed conical roller bearings (sets of 2) and lubricated in oil bath and pressure lubrication. B3 format (35x50 cm) in conventional standard design (no autoplate and/or cocking) but alcohol film dampening with large rollers according to SM52 construction, prints very nicely Originating from 1st owner who did not maintain the machine properly (visually); an extensive maintenance history has been carried out by the importer. The last counter reading in the history is 11.6 Mln from 2003. Due to illness and outsourcing, the previous owner, a printing broker, has hardly used the machine since then. We will check the machine on the current counter reading and ensure correct and proper operation. C)2 dry ice cleaning is still being considered as well as overhauling the entire machine, because the mechanical condition is exceptionally good. This is however cost increasing so the machine is now offered for the cheapest option, that is "as it is", EXW our warehouse in Son, NL. Dodpfx Ajv Nv Taom Tekp Any type of inspection is of course allowed. We guarantee the machine as free from breakage, cylinder damage and/or repair and damage free to gears. The rubber rollers are vitrified and need to be replaced. The Royce ECO circulation and cooling installation for the dampening work shows signs of corrosion. Some specs, for all specs open the PDF at the bottom of this page. Maximum printing speed 12,000 sheets per hour Maximum paper size 365 x 520 mm Minimum paper size 100 x 148 mm or 148 x 100 mm Maximum printing surface 350 x 510 mm Rubber cloth size 500 x 520 x 1.9 mm Plate size 400 - 410 x 510 mm Dampening rollers in this case of film dampening is 1 (62mm) Number of ink feed rollers 4 pieces of 46, 48, 52 and 54 mm Inlay stack height maximum 850 mm Explanation stack height max 360 mm Electrical connection 3 phases 200 VAC 50HZ (primary) but there is a transformer for conversion from 3 x 415/400/380/230 VAC to 200VAC Power consumption in total 7kW Primary fuse in any case 20A Dimensions LxWxH = 2765 x 1523 x 1560 mm Net weight 4000 kg

Condition: ready for operation (used), Year of construction: 1989, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 20216035, color channels: 2 kleuren met keertrommel ook 1/1, paper weight (min.): 30 g/m², paper weight (max.): 350 g/m², paper width (min.): 148 mm, paper width (max.): 520 mm, paper height (min.): 102 mm, paper height (max.): 360 mm, total length: 2,800 mm, total width: 1,250 mm, total height: 1,690 mm, space requirement length: 2,800 mm, space requirement width: 1,250 mm, space requirement height: 1,690 mm, counter reading (black): 1,15,00,000, type of input current: three-phase, input current: 16 A, input voltage: 200 V, Equipment: documentation/manual, In exceptionally good and original condition, only 11.5 million prints (!) Dsdpfx Aev Nwgnjm Tjkp High-quality "heavy duty" B3 (35x50cm) 2-colour offset machine for high-quality streak-free printing due to typical constructive qualities; The turning device is in excellent condition. Cast-on dense molecular cast iron axles with affinity for oil (pressure lubrication) run in RG12 cast bronze 12 bearings, very durable and very good sliding properties. As a result, these machines print beautiful surfaces and halftones without the notorious shock stripe. We have had a lot of experience with this brand and this machine type in particular since 1991 and can deliver all parts from stock to our customers. For the complete specification see the PDF files at the bottom of this advertisement page. If desired, this machine can be completed with an impression, numbering and perforating unit installed by us (foldable) for an additional charge of € 1500,-- (optional) Some specs: Maximum production speed 11,000 sheets/hour with clean and weather printing 9,000 sheets/hour Paper size: minimum 148x105mm, maximum 520 x 360mm Maximum printing surface 500 x350mm Plate size 510 x 410 to 420 mm Paper thickness 0.04 to 0.4 mm 4 ink plate rollers and 2 damp plate rollers (molton dampening) Staffing insert Height of the stack in the insert 900 mm Height of the stack in the delivery 450 mm Chain delivery with 3 gripper bars with hardened gripper tips and carbide coated gripper seats (also with pressure cylinder) Power consumption 4.75 kW Built-in circulation pump and water tank for damp work Dimensions L x W x H = 2800 x 1250 x 1690 mm Net weight 3,560 kg Machine is supplied with oil drip plate Input voltage is 3 x 200/220/230 VAC or via the supplied transformer 3 x 380/400/415 VAC

Condition: like new (used), Year of construction: 2007, operating hours: 106 h, functionality: fully functional, color channels: 5-colour with coater, paper width (min.): 585 mm, paper width (max.): 740 mm, Great XL 75 machine in excellent condition and equipment Lacquer tower (chamber blade system) Prinect Axis Control Prinect Press Center with remote control for ink zones, ink ducts, and circumferential, lateral, and diagonal register with Job Memory Card and touch screen Alcolor Vario film dampening units with recirculation and cooling CombiStar ink unit temperature control (water-cooled) Autoplate XL fully automatic simultaneous plate changing system (plate change in 1 minute for 5 plates!!) Preset automatic format adjustment automatic ink roller cleaning device automatic blanket and impression cylinder cleaning device Grafix powder sprayer IR dryer DryStar 2000 Extended high pile delivery Standard accessories Dodpfsx S Npfex Am Tekp

Condition: used, Year of construction: 2020, 5-color offset printing press + flexo + rotary die cutting Year 2020 Machine equipped with web guider and BST register camera Dkodpfxjx Rc Thj Am Top

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 545290, color channels: 8, paper weight (min.): 60 g/m², paper width (min.): 400 mm, paper width (max.): 720 mm, counter reading (color): 36,52,86,207, year of last overhaul: 2025, HEIDELBERG SPEEDMASTER SM 102-8-P5-S — YEAR 2003 Machine No.: 545290 Specifications • Number of printing units: 8 • Maximum sheet size: 720 × 1,020 mm • Minimum sheet size: 340 × 280 mm • Minimum paper weight: 60 g/m² • Maximum speed: 15,000 sheets/hour • Counter as of 25/11/2025: 365,286,207 impressions Current condition The machine is on-site, available for technical inspection accompanied by Heidelberg specialist technicians. Currently operating with 4 active units. All 8 units are present on the machine. Location Dodpfx Amey Azwco Tokp Asunción, Paraguay. Technical visits can be coordinated prior to offer. Terms of sale • Sale condition "as is, where is" • Technical inspection accepted prior to sale • Dismantling and transport at the buyer's expense.

Condition: used, Year of construction: 1999, color channels: 8, We offer this used Heidelberg Speedmaster 74 8 Color Plus Coater 4/4 offset printing press, year of construction 1999. Manufacturer: Heidelberg Model: Speedmaster 74 8 Color Plus Coater Perfecting 4/4 or Straight Year of manufacture: 1999 Console CPC 1.0.4 Technotrans Cooling Unit Condition: used Category ID: 839 Type ID: 520 Type: offset printing press Dkedpfsynvurex Am Tsp If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Letterpress printing press, foot operated Made in Germany Fully original machine. A brilliant looking exhibit to put in a company lobby. Dkodovac S Dopfx Am Tjp A manually added piston. Rollers Format of the pressure 35x24cm

Condition: excellent (used), Offer includes: Heidelberg SX52-5, manufactured in 2013, with only 37 million impressions, easyControl, Autoplate, Plus version, and substrate capability up to 0.6mm. Dkodjzkaiqopfx Am Tjp

Condition: excellent (used), For sale: a robust, double-station bookbinding/printing press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. This machine was previously operated by the public sector unit Stadt Fürth (Germany), which ensures it is complete and well-maintained. The device is equipped with two independent workstations, a heavy-duty upper beam, and pressure adjustment via lever arms. The lower housing contains the mechanical and electrical systems; power is supplied through a 16A CEE connector (400V). The machine is mounted on wheels for easy mobility. Application This press is suitable for bookbinding, printing, modeling, technical works, and any applications requiring even pressure over a larger area. Ideal for book blocks, covers, laminates, paper and cardboard elements, and other materials that require pressing or stabilization under pressure. Technical condition – Complete unit Dkedpfx Amexzu Rqo Tjp – All levers and mechanisms function correctly – 400V power supply, CEE 16A plug – Mobile design on wheels – Normal signs of use visible in photos – Machine is ready for operation Manufacturer: Karl Tränklein K.G. Country of manufacture: Germany (Made in Germany)

Condition: used, Year of construction: 2008, machine/vehicle number: 1277, product width (max.): 670 mm, working width: 670 mm, type of input current: three-phase, Label flexo printing machines OMET Varyflex Year 2008 - POLAND Number of colors: 8 Drying system: UV GEV Printing width: 670 mm Flexographic printing repeat (min): 12” Flexographic printing repeat (max): 33” Maximum unwind diameter: 1000 mm Maximum rewind diameter: 1000 mm Drying units: 8x UV, 5x hot air Mechanical speed: 200 m/min 76.2 mm – 3” shafts BST web guide Corona Vetaphone Video BST Availability: Immediate Operational status: In production Sleeves (8 pcs of each size – one sleeve for each of the 8 printing units): 14” 8/48 359.833 mm 14” 16/48 364.067 mm 15” 3/8 390.525 mm 16” 4/8 419.1 mm 18” 4/8 457.2 mm 19” 4/8 495.3 mm 19” 13/16 503.238 mm 22” 5/8 574.675 mm 24” 13/16 630.238 mm 27” 4/8 698.5 mm 29” 6/8 755.65 mm 32” 3/8 822.325 mm Dkodoziz Huopfx Am Top Anilox rolls: 500/4 – 2 pcs 500/3.8 – 1 pc 500/3.5 – 2 pcs 500/3 – 2 pcs 500/2.5 – 2 pcs 470/3.1 – 1 pc 400/5 – 2 pcs 400/4.5 – 2 pcs 380/5.5 – 1 pc 340/6 – 1 pc 320/5.5 – 3 pcs 320/7 – 1 pc 280/6 – 2 pcs 280/8 – 1 pc 180/12 – 2 pcs 140/8 – 1 pc 120/10 – 1 pc 100/14 – 1 pc

Condition: used, Year of construction: 2000, The Carint central impression flexographic printing press is designed for printing on PE, PP, OPP, PET films, and paper. The machine features 6 printing units (6+0), a geared drive, and is suitable for a wide range of flexible packaging applications. Material width: 1,280 mm Printing width: 1,250 mm Print repeat: Min: 360 mm / Max: 1,040 mm Mechanical speed: Up to 300 m/min UNWINDER AND REWINDER The machine is equipped with a non-stop turret unwinder and a non-stop turret rewinder. Maximum reel diameter: 800 mm. Expanding shafts: 3" DRYING SYSTEM Electrical drying system. INK SUPPLY 6 pneumatic ink pumps. ACCESSORIES • Motorized longitudinal register • Chamber doctor blade system • 8 Anilox cylinders • 6 Plate cylinders • Video inspection system • Web guides • Banana rollers • Plate cylinder lifting hoist • 2 electrical hoists Dkedszku Nlspfx Am Tep • 2 cylinder storage racks with 6 cylinders of various repeat sizes