Used Press Horizontal for sale (18,088)

Condition: ready for operation (used), power: 2.2 kW (2.99 HP), empty load weight: 635 kg, total length: 1,100 mm, total width: 630 mm, total height: 925 mm, load capacity: 22,000 kg, bending examples: - 100 mm width x 20 mm thickness - 120 mm width x 15 mm thickness min axis base between mobile and fixed pins: 110 mm max axis base between mobie and fixed pins: 310 mm Standard equipment: V-90 Kedpfx Adex Twa Uswsdg Max ram adjustment: 200 mm High speed displacement: 1750 mm/min Working speed: 450 mm/min Returning speed: 2000 mm/min Table area: 625 x 1100 mm Table height: fixed (1) -- sliding (2): 920 mm Courant needed: 400V

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 80 t, DIXI 80 SLD horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Kdodpox Sqlnofx Adwjg Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Kdodex Rbtgepfx Adwog Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 80 t, bale weight: 600 kg, DIXI 80 SLS horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Kjdpfx Adsx Rbuqewjdg Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 60 t, bale weight: 450 kg, DIXI 60 SLD horizontal press baler 2014 year of production Kjdpfxjx Rpnrj Adwedg Press checked by service / new hydraulic cylinder installed. Semi-automatic 60 ton press system for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra Packs foils Foams PET bottles Insulating mats and other compressible materials. Machine dimensions L x H x W approx. mm: 4150 (5080) x 1725 x 2035 Filling opening W x H (standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Pressing force max. kN: 60 t / 600 kN Ironing cycle (average value) approx. s: 47 Bale size W x H x L approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370-410 Binding: manual Number of ties: 3, with wire Drive power: 7.5 kW; 400V/32A Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, pressing force: 70 t, Equipment: documentation/manual, HSM HL 7009 Re / Li horizontal baler. The machine is in very good condition and regularly serviced by an authorized service center. This baler is designed for larger waste disposal projects in retail outlets and small and medium-sized central warehouses. Bales from the HL 7009 model have a cross-section of 1100 x 1100 mm and, with a bale length of 1200 mm, can weigh up to 600 kg, ensuring optimal utilization of the truck's payload. Pressing force: 700 kN Specific pressing force: 58 N/cm² Drive power: 10.5 kW Voltage / frequency: 400 V / 50 Hz Idle capacity (theor.): 42.97 m³/h Loading opening width x length: 890 x 1020 mm Bale width x height x length: 1100 x 1100 x 1200 mm Total length x width x height: 5366 x 2525 x 2559 mm Kodex Sq Rdspfx Adwedg Bale weight: 600 kg

Condition: used, Technical details: pressure: 160 t Kodju Nfpuopfx Adwedg table surface area: 1.260 x 600 (vertical) mm table plate diameter: 1260 x 600 x 70 (vertical) mm ram surface area: 700 x 360 mm throat: 300 mm weight of the machine approx.: 9000 kg dimensions L x W x H: 3,7 x 1,5 x 2,2 m distance base - ram: 1.000mm mounted ram construction: L:660 x W:300 x H:370mm rollers 1x on the right and 1x on the left with vertical adjustment 250mm. (Ø 80x300mm) *

Condition: used, Technical details: pressure: 200 t stroke: ca. 200mm mm table surface area: L:1200xH:450 mm Kdsdpou Nfrpjfx Adweg jaw width: 1000x200 mm total power requirement: 18 kW weight of the machine ca.: 15 t dimension machine xH: 4,5x1,5x2,2 m Beam - Straight Bending Machine - electric box (LxWxH:0,85x0,8x2,7m) - chuck intake: LxW 1200x220mm - chuck adjustment 200mm moveable - opening width of chucks 300mm - manual control accessories: - div. limit stops, tools, try square and marking gauges i.D. *

Condition: new, Year of construction: 2025, operating speed: 10 mm/s, pressing force: 80 t, warranty duration: 12 months, HP 80 HYDRAULIC HORIZONTAL PRESS MACHINE Tubend HP-Series Hydraulic Horizontal Press Machines can easily make all operations such as bending, cutting, punching, shaping pipe, square profile, sheet metal with standard or special tools. Standard Accessories • Ergonomic Tool Clamping Table • Hydraulic Speed and Pressure Adjustment • Easily Adjustable Back Gauge Ksdpsvlam Ajfx Adwedg • Induction Hardened Support Pins • NC Control • Easy Tool Change MODEL HP 80 Max Pressure At 200 Bars TON 80 Bending Capacity Flat Material MM 300×20 Max Stroke MM 300 Height Of Toolings MM 300 Working Speed MM/SEC 10 Engine Power KW 7.5 Net Weight KG 1850 Size Of The Machine (LxWxH) MM 850x1600x1600 COUNTRY OF ORIGIN: Türkiye PRODUCED FROM 10 TONS TO 100 TONS.

Condition: new, Year of construction: 2024, operating speed: 10 mm/s, pressing force: 60 t, warranty duration: 12 months, TUBEND HP Series Hydraulic Horizontal Press Machine can easily perform all productions such as bending, cutting, drilling, shaping for standard or special molds such as pipe, profile, sheet, plate production. Standard Equipment • Digitally adjustable forward-backward distance position • Adjustable working pressure • Adjustable back support • Quick mold connection system • Easy mold change TECHNICAL SPECIFICATIONS: Kdjdpjvk Sdwsfx Adweg MODEL HP 60 Max Pressure At 200 Bars TON 60 Bending Capacity Flat Material MM 300×16 Max Stroke MM 300 Height Of Toolings MM 300 Working Speed MM/SEC 10 Motor Power KW 5.5 Net Weight KG 1530 Size Of The Machine (LxWxH) MM 750x1450x1360

Condition: excellent (used), Block press horizontal 5000 mm length 800 mm width 12 cylinders 5 hold downs Kodpfx Ael D T D Eedwedg

Condition: used, Year of construction: 2008, Technical details: pressure: 6 t stroke: 1020 mm total power requirement: 3,5 kW Can only adjust between tips Kodpfxew Ng D Ts Adwsdg *

Condition: new, Year of construction: 2023, Horizontal bending machine AH 20 with backgauge - ZOPF - with semi-automatic control - hydraulic pressure 20 to. - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. Kdodowyt Tqepfx Adwog - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 2,2 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x12 mm round tube up to 48 mm

Condition: excellent (used), Continuous horizontal press, to compact and pack materials such as cardboard, paper, plastics and others. IMABE IBERICA brand, pressure 125TN, loading mouth 1800 * 1000mm, with blades on the top of the compaction carriage that allows cutting the excess material above the compaction tunnel. Kedpfxsv U R Agj Adwjdg Folding compaction tunnel, both at the top and on the sides, for greater retention of the material, outlet for bullets of dimensions 1050 * 1100mm and adjustable length. Automatic tying system, lateral, by 5 wires, for high production 30-35ton / hour. Fully rebuilt and revised in 2019

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, pressing force: 15 t, bale width: 700 mm, bale height: 700 mm, bale weight: 220 kg, input voltage: 400 V, power: 4 kW (5.44 HP), empty load weight: 2,700 kg, Manufacturer: Borg Baling Company Type: S-15KK Year of production: 2002 3x400V, 4kW, 14.5A Kdedpfxsh Dy Rfs Adweg Compression force: 15t Net weight: 2.7 t Bale max. sizes 700x700x1000 mm weight of a bale: ca 120 – 220kg Wide Range of Used Machinery, Industrial Equipment

Condition: ready for operation (used), power: 134.102 kW (182.33 HP), empty load weight: 21,000 kg, total length: 5,000 mm, total width: 2,120 mm, total height: 2,140 mm, load capacity: 4,00,000 kg, operating speed: 15 mm/s, reverse speed: 49 mm/s, Richtpers voor balken en andere Elektrische aanpassing voor slag (voor repeterend werk) Handmatige aanpassing voor het openen van de buigmatrijs Aangedreven rollen om het werkstuk in te voeren Max ram adjustment: 620 mm Max distance between table -- ram: 600 mm (1020 mm without tools) Kdjdpfx Adjv Rwfgewog

Condition: as good as new (ex-display), Year of construction: 2024, Horizontal Bending press Zopf - model T 200 - year of construction 2024 - demo model - length of stroke 185 mm - weight 450 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Digital Readout with programming of the stroke Kodpfx Aody Igzedwodg demo model

Condition: as good as new (ex-display), Year of construction: 2025, Horizontal bending machine T 400 Multi - ZOPF - with semi-automatic control - (99 bending programs each 16 steps) - hydraulic pressure 40 to. - length of stroke 250 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - colour RAL5012 / RAL7015 Kodpfofiqlfjx Adwodg - bending capacity: flat material max. 200x22 mm round tube up to 65 mm

Condition: as good as new (ex-display), Year of construction: 2025, Horizontal Bending press Zopf - model T 100 - year of construction 2025 - demo model Kedpfx Adodibygowjdg - length of stroke 200 mm - weight 320 kg Bending capacity flat material mild steel 150x10 (with special tooling) with punch radius 5 mm and die V = 63 mm inclusive mecanical stop Digital Readout with programming of the stroke demo model

Condition: as good as new (ex-display), Year of construction: 2024, Horizontal Bending press Zopf - model T 200 with automatic backgauge - programable backgauge 900 mm with - year of construction 2023 - demo model - length of stroke 185 mm Kdjdpfx Asgrydbodweg - weight 500 kg Bending capacity flat material mild steel 200x12 mm (with special tooling) with punch radius 5 mm and die V = 100 mm Touch screen with programming of the stroke and backgauge demo model

Condition: new, Year of construction: 2024, overall weight: 1,140 kg, tool height: 200 mm, operating speed: 10 mm/s, total length: 1,300 mm, total height: 1,300 mm, total width: 600 mm, reverse speed: 10 mm/s, working height: 935 mm, table width: 600 mm, table length: 1,200 mm, stroke length: 290 mm, pressing force: 40 t, Equipment: emergency stop, STANDARD ACCESSORIES Ergonomic Tool Clamping Table Hydraulic Speed and Pressure Adjustment Easily Adjustable Back Gauge Induction Hardened Support Pins NC Control Easy Tool Change Kdodst H Sxcjpfx Adwsg MODEL HP 40 Max Pressure At 200 Bars ton 40 Bending Capacity Flat Material mm 250×16 Max Stroke mm 300 Height Of Toolings mm 250 Working Speed mm/sec 10 Motor Power kw 4 Net Weight kg 1190

Condition: like new (used), Year of construction: 2022, machine/vehicle number: DF0147, Pressure: 150 t Total power requirement: 20 kW Machine weight approx.: 11.5 t space requirement approx.: 8800 x 1800 x 2200 mm pressure setting infinitely variable via rotary control : 15-150 t cylinder diameter : 100 mm pressing speed (infinitely variable via joystick) : 0-9,9 mm/s servo motor : 2 kW cooling unit : 1 kW Oil tank (under press table): 350 l Kedpfx Adjfxygwswjdg Oil cooling (electric): 1 kW (max) Profile straightening press 150 T with two pressure cylinders. The straightening machine is prepared for the particular type of material by interchangeable rounded spacer elements. The replacement of the 10 inserts is done manually by simply pushing them into the holding grooves. The scope of delivery includes basic equipment for one profile. The program for the respective profile is then called up on the monitor. The monitor shows the ideal line and, in addition, an ascending and descending millimeter scale with 0.5 mm lines. The profile to be straightened is now placed on the left side of the table, pushed against a holder and clamped with a quick-clamping device. Both the holder and the quick-clamping device are mounted on a clamping plate for quick adjustment. This clamping plate moves on a linear guide from left to right and vice versa. Transport is by a chain drive and a servo motor. The movement is triggered by a joystick on the control panel. After the profile has been clamped, the operator moves the clamping platen into the press using the joystick. The travel speed is up to 100 mm per second, but can be continuously adjusted down to 10 mm per second. To do this, it is sufficient to pull the lever of the control system slightly less. A high-resolution camera now shows the profile in the press. The operator sees exactly the deviation from the ideal line. Depending on the need, he now pushes or pulls the profile to the desired accuracy. He then continues to move slowly through the press, seeing in detail on the monitor whether the profile is now straight. Depending on the need, he can now move the profile forwards or backwards and readjust it. After the profile has been straightened, it moves out of the press on the right and can be removed. If desired, the clamping platen now moves back to the loading position on the left or it is now loaded from the right to save time. The press may only be operated under the following conditions: Perm. ambient temperature: 5-60 °C Permissible relative humidity: at 20°C - 90%, at 40°C - 50% Height of the installation site NN: + 1000 m Perm. fluctuations E-mains: +/- 10%.

Condition: new, Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 800 - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 80 to. - length of stroke 300 mm - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 7,5 KW - 400 V 50 hz 3 ph. - working height 940 mm - closed table - replaceable wear plate - weight 2100 kg Ksdjd A Nc Djpfx Adwjdg - bending capacity: flat material max. 300x32 mm at Vmax round tube 3/8" - 3" gas pipe

Condition: used, HORIZONTAL PRESS PRESSURE 80t Kdjdpfxsihvnmj Adwjg

Condition: new, Year of construction: 2024, functionality: fully functional, OSAMA S2R 1300 roller gluing machine for cold gluing. Ksdpfx Adevxai Rjwodg Brand NEW. Packed by the producer OSAMA in Italy.