Used Pallets for sale (6,624)

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: 070/2819, Automatic pallet strapping machine Manufacturer: Itipack Model: SP1/F Serial number: 070/2819 Specifications: - Electrical power supply: 400 V, 50 Hz Bdodpfxoz Inlfs Airji - Motor power: 1 kW - Current: 2.5 A - Strapping band size: steel band 16 × 0.4 mm Year of manufacture: September 2009 Approximate weight: 1,000 kg Approximate dimensions (L × W × H): 2,400 × 1,500 × 2,500 mm

Condition: used, Year of construction: 2001, machine/vehicle number: Z0422, working width: 9,200 mm, Perfecta pallet turner PT 10 PAJ: Machine number Z0422, year of manufacture: 2001, working width: 80 x 120 cm, with compressor, ventilation, and vibrator. Bdsdpfx Ais Afh Risrji

Condition: ready for operation (used), Year of construction: 1990, Lafis LEH 55 electric pallet truck Model LEH 55 P Bsdpfxjrgragj Airjdi Load capacity 5500 kg Year of construction 1990 Fork / stage 2500 mm x 1000 mm Motor 290W Hydraulics 2000 W Battery 24 V With battery and charger Lifting height: 200 mm Battery pack Banner PSS 320 built in 2015

Condition: used, Year of construction: 2024, Filling weight range: 5kg-25kg, max. bagging capacity: 400 bags/h, bag material: PE, bag length: 570mm-880mm, bag width: 290mm-420mm, net weigher volume: 60l, control system: Sigmatek. Including conveyor belts and palletizing robot. The machine has very low operating hours and is in working condition. Documentation available. An on-site inspection is possible. Bdjdpfx Aij Adt Iqsrji

Year of construction: 2000, condition: good (used), Pallet wrapper, stretch wrapping machine for pallets, Strema, H 1300 – used: Price ex works: €1,950 (net), including loading! Manufacturer: Strema Type: H 1300 Year of manufacture: 2000 Bdjdpfx Aoz Sd A Rsiroi Machine number: 23123 Rotating table diameter: approx. 1.60 m The machine is embedded in the floor of the hall, therefore no ramp or similar is required. Column height: approx. 2.70 m 3 x 400 VAC, 50 Hz, 16 A Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 10,278 h, load capacity: 2,000 kg, fuel type: electric, fork length: 1,600 mm, drive type: Elektro, Low-lift pallet truck Load center: 600 Condition: Ready for operation and fully functional Technical condition: good Bsdpfx Aj Agc Ntoirodi Battery voltage: 24V Battery capacity: 375Ah Battery manufacturer: AIM Battery type: PzS Battery year of manufacture: 2021 Battery condition: 60 - 80% Description: Handover with new FEM 4.004 inspection, including inspection certificate. If you have any further questions, please do not hesitate to call us. In addition to this model, we have approximately 150 other forklifts in stock. Feel free to browse our website at fleischmann-foerdertechnik.com. We would be happy to provide you with a quote for leasing and financing, as well as delivery at favorable conditions. We also offer trade-in options for Linde equipment – even if you do not purchase a device from us. The stated operating hours were recorded as of the date of the listing. Subject to prior sale, changes and errors.

Condition: used, Jungheinrich EJC 14 Lifting ant no. 265 Stroke: 2900mm Rated load capacity: 1400 kg Operating hours: 3389 h Further technical data see pictures. (Changes and errors in the technical data, information are reserved) We are happy to organize a cost-effective forwarding agent for you. organize! You are welcome to come by for a viewing. You will receive a proper invoice. Bdodpfx Aijuuy Rperei Foreign customers can also receive a net invoice. can also be issued. Prerequisite is a valid VAT number. Subject to prior sale. Company names and trademarks are the property of their respective owners. and serve only to identify and describe the products. The design and electrical connection of the machine / The installation and electrical connection of the machine/device must be carried out by a trained specialist. checked.

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty rack designed for demanding industrial storage applications. Its modular high-bay construction makes it ideally suited for logistics centers, industrial operations, large warehouses, and forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load of up to 6,000 kg, this immediately available racking system offers an efficient storage solution for Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 825 cm - Depth: approx. 105 cm - Length: approx. 5,040 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: painted yellow - Uprights: approx. 825 x 105 cm, pre-assembled - Upright color: painted blue - Levels: floor + 4 - Pallet spaces: 270 including floor locations - Version: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 19 x uprights (approx. 825 x 105 cm), pre-assembled - 144 x beams (approx. 270 cm) - 176 x safety pins Price: 5,730.00 € net 6,818.70 € gross You will receive an invoice with VAT shown separately. Bdsdpfxo Ahg A Ij Airsi DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery in Germany via our partner freight forwarder – shipping costs depend on the postal code - Professional installation and dismantling by trained teams available as an option - Rack inspections in accordance with DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will be happy to provide you with a non-binding offer tailored to your specific requirements. Whether new installations, conversions, or expansions – we offer expert advice for your racking configuration. SHOWROOM: You are welcome to visit our showroom! Experience our pallet racks, storage shelves and other solutions in person. Many systems are on display and can be viewed directly. Our expert advisors are happy to assist you with any questions or to provide tailored advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us via message or phone. Our phone number is available on our company page. ☎️ We are available by phone Monday through Friday from 8:00 am to 4:00 pm. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: ready for operation (used), Jungheinrich EJC 14 Lifting Ant No. 233 Lift: 2900mm Rated capacity: 1400 Kg For more technical data see pictures. (Changes and errors in the technical data, information are reserved!) Gladly we can arrange for you a cost-effective shipping company organize! Bedpomxk Aijfx Airjdi You are welcome to come by for a visit. You will receive a proper invoice. For foreign customers can also be a net invoice can be created. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. The structure and electrical connection of the machine / device must be carried out by a trained specialist or a qualified electrician. checked.

Condition: used, Electric lifting pallet truck Bedpfo Ahgpqex Airsdi

Condition: used, Year of construction: 2004, machine/vehicle number: PAL55, Used OCME PERSEUS L12 palletizer 22680 BPHTechnical Specifications & Performance DataThe OCME Perseus L12 Palletizer is a conventional automatic palletizing system engineered for wrap-around packs and cases. Built in 2004 and featuring a robust mechanical design with Siemens automation, it delivers reliable performance for high-volume beverage and food packaging environments. Designed to handle products packed in cartons coming from upstream wrap-around or case packing machines, it supports standardized pallet formats for streamlined logistics and warehousing.Manufacturer: OCMEModel: Perseus L12Machine type: Palletizer (conventional, low-level infeed)Year of manufacture: 2004Maximum speed: 22680 (3x2 pattern)Handled unit: Wrap-around packs / casesSupported pallets: EPAL 800x1200 mmContainer materials downstream of packs: PET, Glass, Aluminum cansAutomation: Siemens PLCCompressed air: 6 barLayer pad inserter: AutomaticCompliance: CE-markedAdvanced Automation & Control SystemsThe Perseus L12 integrates a Siemens PLC for dependable control, recipe management, and precise coordination of infeed, layering, and discharge operations. The HMI-driven interface enables quick format selection and parameter adjustments to minimize downtime. Safety interlocks and a multi-color stack light provide clear visual status and enhance operator awareness. Modular programming supports stable layer formation and accurate placement of interlayer pads to ensure load integrity.Siemens PLC with user-friendly HMIRecipe-based format management for rapid changeoversIntegrated safety interlocks and emergency stop circuitsAutomated layer pad insertion synchronizationProduction Line Integration CapabilitiesEngineered for seamless integration into a used bottling line or second hand industrial packaging setup, the Perseus L12 accepts cartons from wrap-around or case packers and forms stable pallet loads. It interfaces easily with standard conveyor systems and can be configured for various layout constraints due to its low-level infeed design. It is suitable for beverage production handling of PET, glass, and aluminum can packs, making it ideal for water, CSD, beer, wine, milk, oil, and spirits applications.Inline operation with wrap-around packers and case packersDesigned for PET, Glass, and Aluminum can packsOptimized for EPAL 800x1200 palletsMulti-format flexibility for diverse product SKUsMachine Condition & Maintenance HistoryThis palletizer is ready for operation, overhauled, and offered with compatible spare parts. It includes a warranty period to ensure dependable startup and performance. The overall condition supports immediate deployment into beverage or food packaging lines with minimal commissioning effort.Ready for immediate useOverhauled with compatible spare partsWarrant... Bdodpfx Aij Adyu Rsrji

Condition: used, Year of construction: 2007, machine/vehicle number: PAL53, Used COMACO PA4B palletizer 10800 BPHTechnical Specifications & Performance DataThe Comaco PA4B is a second hand, overhauled palletizer engineered for reliable end-of-line handling in beverage production and industrial packaging. Built in 2007 and professionally refurbished, this unit delivers robust performance with a maximum throughput of up to 10,800 bottles per hour (3x2 configuration), making it a strong fit for used bottling line upgrades where efficiency and footprint matter.Model: PA4BManufacturer: ComacoYear: 2007Maximum speed: 10,800 bottles per hour (3x2 pattern)Container materials supported: Aluminum cans, PET bottles, Glass bottlesPallet formats: Eur-Epal 800x1200 mm; 1000x1200 mmInstalled power: 1.4 kWElectrical supply: 400 V, 50 HzWorking pressure: 6 barApproximate footprint: 8165 x 7777 mmLayout note: Working height H = 1100 mm (as indicated on layout)Configuration: Conventional automatic palletizer with automatic layer-pad inserterAdvanced Automation & Control SystemsDesigned for dependable automation, the PA4B integrates proven Siemens control technology for stable operation and easy diagnostics. A Siemens Simatic HMI provides intuitive operator interaction, while the Siemens S7 PLC ensures precise motion control and sequencing.HMI: Siemens SimaticPLC: Siemens S7Operational mode: Conventional automatic palletizing with layer-pad applicationChangeover: Practical adjustments for varying pack patterns and container typesProduction Line Integration CapabilitiesThe Comaco PA4B integrates smoothly with upstream packaging machinery such as shrink wrappers, wrap-around case packers, and conveyors. It handles a wide range of secondary packaging units, including bundles, cases, and tray-packs, supporting both PET and Glass bottle lines as well as Aluminum cans.Inline/standalone: Suitable for inline integration or standalone operationHandled units: Bundles, cases, tray-packsMulti-product flexibility: Compatible with water, CSD, beer, wine, milk, oil, and spirits workflowsPallet formats: Eur-Epal 800x1200 mm; 1000x1200 mmMachine Condition & Maintenance HistoryThis palletizer is overhauled, tested, and ready for operation. Supplied in excellent working order with a commercial guarantee, it is an ideal choice for facilities seeking a reliable second hand upgrade with minimized commissioning risk.Status: Ready for immediate useCondition: Overhauled and guaranteedWarranty: 6 monthsSpare parts: Compatible spare parts availableOperational Performance & VersatilityThe PA4B addresses diverse end-of-line need... Bedpfxo Adtzqo Airsdi

Condition: excellent (used), Year of construction: 2023, Cell manufacturing year: 2023 Maximum stacking height: 2200 mm Performance: up to 12 cartons/minute Number of robots: 1 Robot: YASKAWA Motoman PL80 Robot manufacturing year: 2022 Serial number: 295-11-1 Number of robot axes: 5 Bdsdjz Snw Rjpfx Airsi Robot payload: 80 kg Robot weight: 560 kg Gripping system: vacuum gripper Interlayer magazine: 1 unit, with side access Transport system: roller conveyor with carton centering Safety devices: robot cell with safety light curtain

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, operating hours: 4,700 h, load capacity: 1,600 kg, fuel type: electric, battery capacity: 250 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (black), rear tire type: polyurethane tires (black), overall weight: 497 kg, total length: 1,700 mm, total width: 720 mm, fuel: electricity, LINDE T 16 – Electric low-lift pallet truck TECHNICAL DATA Lifting capacity: 1.600 kg Fork length: 1.150 mm Drive: Elektro 24V Battery: 24 V 250 Ah v. 2020 Charger: 24 V Tyres: Polyurethan Mono Service weight: 497 kg Length: 1.700 mm Bdodpfxjz R Ugde Airji Width: 720 mm Year of manufacture: 2020 Operating hours: 4.700 h Condition: working condition Internal no.: 1309304 Location: 14974 Ludwigsfelde bei Berlin Price on request. Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: good (used), Year of construction: 2018, operating hours: 3,869 h, load capacity: 1,400 kg, lifting height: 2,350 mm, fuel type: electric, mast type: duplex, construction height: 2,000 mm, Manufacturer + model: TOYOTA SWE 140 S Mast: 2W2350 Bodpfx Ajzuudkoirjdi ID: 25091.0187 Category: Used Mast: 2W2350 Lowered height: 2000 mm Lifting height: 2350 mm Capacity: 1400 kg Year: 2018 Hours: 3869 hours Capacity: 24 V Options: VERY unique, WIDE TRACK equipped with a PALLET changer!! = Spreader / Rotator / Clamp (Reach from 560 to 1700 mm) - PROPORTIONAL lift and lower valves - Width between the support legs: 1280 mm!!

Condition: used, Year of construction: 2016, Overview This Haloila Octopus Compact is an automatic rotary-ring stretch wrapper for palletised loads, built in 2016 by Oy M. Haloila Ab in the inline version. It is sold together with its pallet roller conveyor with pallet lifter and its control cabinet. The machine was specified for wrapping barrels and canisters on pallets, is in very good condition and fully functional, and has been out of production since July 2024. It is still installed and under power and can be inspected on site. The rotating ring carries the film carriage around the stationary pallet, so the load itself is never turned - a compact layout suited to lines where the pallet runs straight through the winder on the conveyor. Technical data - Manufacturer: Haloila - Model: Octopus Compact, inline version - Year of manufacture: 2016 - Machine type: automatic rotary-ring pallet stretch wrapper (pallet winder) - Designed output: 32 pallets per hour (reference pallet height 1,200 mm, 14 wraps per pallet, double wrapping) - Pallet formats: 1,000 x 1,200 mm, Euro 800 x 1,200 mm and special 1,200 x 1,200 mm - Load: up to 1,200 x 1,200 mm, height 500 to 1,200 mm, up to 1,000 kg - Conveyor: roller conveyor, height 390 mm, speed 15 m/min, effective width 1,285 mm, roller pitch 166 mm, Movimot geared motors - Film carriage: AC-powered, pre-stretch up to 230 % - Film seaming: heat-seal pad - Power supply: 3 x 400 V, 50 Hz + N + PE - Connected load: 4 kW - Rated current: 10 A - CE mark on the machine plate Equipment - Rotating ring with film carriage and film pre-stretch unit - Roping device - Pallet roller conveyor through the winder, with chain transfer section and pneumatic pallet lifter with sensors - Photoelectric sensors for pallet and load height detection, photocells for load position - Control cabinet and touchscreen operator panel (German), signal tower - Signal exchange interface (DP/DP coupler) for connection to a line control - Safety fencing around the wrapping zone, safety light curtains at infeed and outfeed with muting - Restart push-buttons at the infeed Condition Used, very good condition and fully functional. Out of production since July 2024. Sold without warranty. Availability Bedpfx Aez R Sxdoiredi Available immediately. The machine is still installed: dismantling and loading are to be arranged by the buyer. The matching oil filling line from the same site can also be offered on request. Location: Germany.

Condition: used, Year of construction: 2021, Overview This Robopac Helix 4 EVO pallet winder was built in 2021, with less than 500 operating hours - technically close to new. The arm carries the pre-stretch carriage around the stationary pallet, so the load itself is never turned - the configuration for unstable, fragile or heavy loads at high output (capacity below). Built as a stand-alone unit. Technical data Bjdpszzz Rdsfx Airodi - Manufacturer: Robopac - Model: Helix 4 EVO - Year of manufacture: 2021 - Machine type: automatic rotating-arm stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: 82 pallets/h (11 wraps, 1,000 mm H), 73 (15 wraps, 1,600 mm H), 64 (19 wraps, 2,000 mm H) - Wrapping cycle time: approx. 36.3 s at H 1,600 mm, 15 wraps (conveyor excluded) - Pallet sizes: 800 x 1,200 mm and 800 x 600 mm; industrial pallets and quarter pallets can be wrapped as well, centred on the conveyor - Load height: 1,000 - 2,000 mm incl. pallet; mechanical max. 2,550 mm incl. pallet and conveyor - Load weight: 100 - 1,200 kg - Conveyor speed: 15 m/min - Machine height: 4,721 mm; hall height from 7,000 mm - Pre-stretch: PGSA carriage, electronically adjustable 100 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. dia. 250 mm, core 76 mm, max. weight 16 kg - Control: Siemens SIMATIC S7-1500 PLC, TP700 7" colour touch panel - Wrapping programs: 15, expandable to 64, 12 control steps per recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry and oil-free - Documentation and HMI languages: German / English / Italian Equipment - Rotating arm on a four-column steel structure, geared slewing ring with central lubrication - Patented PGSA pre-stretch carriage with load cell, film tension corrected at the corners, set from the display - Automatic film clamping, cutting and impulse-sealing unit, spring gripper with 300 mm horizontal stroke - Easy Lock tilting roller and roping device for narrowing the film web from below - Pantograph top press unit for load stabilisation during wrapping - Photocell for automatic pallet-height reading - Integrated roller conveyor, pallets loaded and unloaded by forklift - SEW IP55 geared motors for arm rotation and carriage lift, FESTO pneumatic components - Glazed enclosure with Sick M4000 light curtains, 30 mm resolution, 1,800 mm field height - Enlarged illuminated switch cabinet and a separate, independent operator panel - TPM package: centralised lubrication points, gauges with red/green rings, maintenance intervals on the display - Troubleshooting in the HMI with fault location and remedy - R-Connect remote connectivity with cloud portal for production data and teleservice - Documentation printed and on USB: manual, CE declaration, diagrams, spare parts catalogue, layout Condition Used - virtually new, dismantled and professionally packed for transport; photographs show it assembled before dismantling. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: ready for operation (used), functionality: fully functional, This used Jungheinrich Esmena pallet racking is a compact, high-performance heavy-duty racking system designed for industrial storage requirements. The modular high-bay shelving is ideal for logistics, industry, large warehouses, and freight forwarding companies. With a shelf load capacity of up to 1,500 kg per level and a bay load capacity of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy load units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 10,080 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow lacquered - Uprights: approx. 400 x 105 cm, pre-assembled - Upright color: blue lacquered - Levels: floor + 2 - Pallet positions: 324 incl. floor locations - Condition: Used Jungheinrich Esmena SCOPE OF DELIVERY: - 037 x uprights (approx. 400 x 105 cm), pre-assembled - 144 x beams (approx. 270 cm) - 288 x safety pins Price: €6,580.00 net €7,830.20 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany by our partner freight forwarder – shipping costs depend on the postal code - Professional installation and dismantling by trained teams available as an option - Racking inspections in accordance with DIN EN 15635 by certified inspectors Bsdpfx Ao Af Sbpoirjdi - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTING: Our planning department is happy to provide you with a non-binding offer tailored to your requirements. Whether new construction, conversion, or extension – we offer professional advice on your racking configuration. SHOWROOM: Visit us in our showroom! See a wide range of our pallet racking, warehouse shelving, and other solutions on display. Many systems are assembled and can be experienced firsthand. Our specialists are available for questions and personalized advice – we look forward to your visit! Haven't found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Contact us easily by message or phone. Our phone number can be found on our company page. ☎️ You can reach us by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number, and we will call you back as soon as possible.

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: documentation/manual, We are offering this used NEWTEC BAG PALLETIZING Chimpal 600 palletizer, manufactured in 2016. Manufacturer: NEWTEC BAG PALLETIZING Model: Chimpal 600 Serial number: A1607 Year of manufacture: 2016 Type: 600.S1000.G067.053.OR3 Description: Palletizing equipment The system can also handle Euro pallets 800x1200 or CP1 pallets 1000x1200. Maximum weight per bag: 50 kg Capacity: up to 500 bags per hour Includes sheet dispenser. The system is currently in operation and can be inspected until its dismantling in September/October 2026. Test palletizing is possible during the summer. The company Newtec has been acquired by Haver&Böcker. Service for the palletizers is provided from Germany. The pallet wrapper shown in the pictures is included in the offer. Bdjdpfjyzzr Rsx Airei

Condition: good (used), Year of construction: 2020, operating hours: 1,555 h, load capacity: 1,600 kg, fuel type: electric, empty load weight: 500 kg, mileage: 1,555 km, - Electric pallet truck - Brand: Still (Germany) Bodpfjy Sa Dyox Airsdi - Year of manufacture: 2020 - 1,555 operating hours - Capacity: 1,600 kg - Suitable for Euro pallets - Battery - with automatic filling system - INTERNAL charger

Condition: used, functionality: unexamined, machine/vehicle number: F20324L00162, Year of construction: 2022, operating hours: 1,305 h, load capacity: 1,400 kg, lifting height: 1,844 mm, free lift: 895 mm, fuel type: electric, mast type: duplex, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), Equipment: CE marking, full service history, STILL EXV14I Li-Ion Pallet truck – not refurbished, condition as shown in the pictures. Technical specifications: - NiHo mast - Lifting height 1,844 mm - Collapsed height 1,415 mm - Vulkollan tires, single rollers - Forks 1150 mm - Initial lift Additional equipment: - Non-regenerated 24V/4.73kWh lithium-ion battery Bodpe Agchdofx Airodi Discover the reliable STILL forklifts that will optimize your warehouse processes and increase the efficiency of your intralogistics. Visit still.pl to learn about the full specifications, check available models, and choose an intelligent solution tailored to your business. STILL Polska offers flexible rentals of modern forklifts, perfectly suited for the operation of any warehouse. Short-term rentals at STILL Polska provide immediate support for your business during peak seasons and in the event of sudden equipment failures. Choose from a range of modern, readily available forklifts and benefit from flexible terms, comprehensive service support, and a guarantee of uninterrupted operation.

Condition: new, Year of construction: 2026, CORMAK WRHS 1610 Mast Pallet Truck is a professional device designed for fast and efficient lifting and transporting of heavy loads in warehouses, production halls, and other industrial environments. Thanks to its advanced construction and high-quality components, this mast pallet truck provides reliability, efficiency, and safety during daily operations. Its main advantages are a high load capacity and significant lifting height, making it an ideal solution for handling pallets and working as a pallet stacker in various industrial applications. Main advantages of the WRHS 1610 mast pallet truck The WRHS 1610 mast pallet truck has been designed for demanding users who require durability, high performance, and operational safety. Its robust construction and functional solutions make it an essential tool for warehouse operations. Key benefits: High load capacity – a maximum lifting capacity of 1000 kg allows the truck to handle heavy pallets and large-sized loads efficiently. Lifting height of 1600 mm – enables convenient storage of goods on warehouse racks, helping to optimize available storage space. Polyurethane wheels – high-quality wheels provide smooth movement, quiet operation, and long service life, even under demanding warehouse conditions. Ergonomic design – the mast and handle are designed for operator comfort, allowing easy handling while reducing physical strain. Durable and stable construction – the strong steel mast ensures stability during lifting and lowering operations, guaranteeing reliable and safe performance. Bdsdericgaspfx Airoi Construction and technology of the WRHS 1610 mast pallet truck The WRHS 1610 mast pallet truck combines high-quality workmanship with modern technical solutions. Mast construction The mast is made of high-quality steel, providing excellent resistance to mechanical damage. Its rigid design ensures load stability and safe transportation during lifting operations. Wheels and rollers The truck is equipped with durable polyurethane wheels with dimensions of 180 × 50 mm and fork rollers measuring 74 × 70 mm. These components ensure smooth, quiet, and stable movement on various types of surfaces. Ergonomic operator handle The manual control handle has been designed to provide comfortable operation and easy maneuvering, even in narrow warehouse aisles. Advanced lifting system The WRHS 1610 features: Two lifting options: manual and foot-operated lifting Stepless fork lowering speed adjustment Truck locking system Brakes on both steering wheels for improved safety and stability during operation Standard equipment Load capacity: 1000 kg Lifting height: 1600 mm Steel mast with reinforced construction Polyurethane steering wheels Fork rollers for smooth movement Manual and foot-operated lifting system Adjustable fork lowering speed Locking system and brakes on both steering wheels Ergonomic operating handle Technical specifications Parameter Value Load capacity 1000 kg Lifting height 1600 mm Fork dimensions (L × W) 1150 × 145 mm External fork width 550 mm Distance between forks 230 mm Height with lowered forks 1970 mm Height with raised forks 1970 mm Minimum fork height 90 mm Overall length 1630 mm Overall width 740 mm Turning radius 1400 mm Steering wheels 180 × 50 mm Fork rollers 74 × 70 mm Weight 181 kg

Condition: ready for operation (used), This used Jungheinrich Esmena pallet racking system is a compact, high-performance heavy-duty rack designed to meet demanding industrial storage requirements. The modular high-bay racking is ideally suited for logistics centers, industrial operations, large warehouses, and freight forwarding companies. With a load capacity of up to 1,500 kg per level and a bay load of up to 3,000 kg, this immediately available pallet racking system offers an efficient solution for storing Euro pallets and heavy loading units. PRODUCT DETAILS: - Height: approx. 400 cm - Depth: approx. 105 cm - Length: approx. 1,400 cm - Shelf load: 1,500 kg - Beams: approx. 270 cm - Beam color: yellow powder-coated - Frames: approx. 400 x 105 cm, pre-assembled - Frame color: blue powder-coated - Levels: Floor + 2 - Pallet spaces: 45 including ground level - Version: Used Jungheinrich Esmena Bdjdpo Ahg Dlsfx Airsi SCOPE OF DELIVERY: - 06 x frames (approx. 400 x 105 cm), pre-assembled - 20 x beams (approx. 270 cm) - 40 x locking pins Price: €1,060.00 net €1,261.14 gross An invoice with VAT shown separately will be issued. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery within Germany via our partner hauliers – shipping costs depend on delivery postcode - Professional assembly and disassembly by trained teams available as an option - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly provide you with a non-binding offer – tailored exactly to your requirements. Whether for new builds, upgrades or expansions – we will support you with expert advice on your racking configuration. SHOWROOM: Visit us in our showroom! Experience our pallet racking, warehouse shelving, and other storage solutions firsthand. Many systems are assembled for live demonstration. Our experts are available for your questions and individual consultation – we look forward to welcoming you! Haven’t found the right solution yet? Visit our website for a quick overview of many more products and variations! INTERESTED OR HAVE QUESTIONS? Contact us by message or phone – our telephone number can be found on our company page. ☎️ We are available by phone Monday to Friday, 8:00 am – 4:00 pm. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 470 h, load capacity: 2,000 kg, lifting height: 205 mm, fuel type: electric, fork length: 1,150 mm, empty load weight: 800 kg, total length: 538 mm, drive type: Elektro, construction width: 726 mm, Low-lift pallet truck Load center: 600 Mast type: None Technical condition: very good Front tire type: Polyurethane Front tire condition: 100% Bdsdj Agda Sjpfx Airei Rear tire type: Polyurethane Rear tire condition: 100% Battery voltage: 24V Battery capacity: 225Ah Battery year of manufacture: 2019 Description: Used unit, refurbished by Toyota, including new inspection and new certification according to FEM (formerly UVV). Impulse control, CE certificate.

Condition: good (used), operating hours: 4,490 h, load capacity: 2,000 kg, fuel type: electric, empty load weight: 2,022 kg, mileage: 4,490 km, - Electric pallet truck - Brand: Still (Germany) - Year of manufacture: 2022 - 4,490 operating hours - Capacity: 2,000 kg Bodpfx Ajz Rznajirsdi - Fork length: 2,400 mm - Battery - Includes charger - Automatic filling system