Used Drill grinding machines for sale (65)

Condition: good (used), I sell centering grinder strodkowa, in bdb condition. Cob Hbsvbwvmowa Rsgt

Condition: ready for operation (used), Year of construction: 2001, Darex AP 5000+AP5100 Twist drill sharpener for sale together! The two machines come with a pair of clamps! Sharpening range 2-16 mm! Easy to use, fast work! Automatic rotation! Easy cross-edge cutting! Smaller clamp 2-6.4 Cob Hbev N D Skjwa Rjgt Larger: 6.5-16 Easily position the twist drill with a pneumatic system!

Condition: used, Year of construction: 2002, Suitable for automatic grinding of right-cutting, 2-edged twist drills with cylindrical shaft or MK shaft. Accessories: Coolant system, Dressing device 5 chucks, 1 grinding wheel holder. Grinding area: 2.5-20mm Point angle: 60 - 180° Tool holder conical: MK1 - MK6 Cgsb Hbwjr U Stmja Rjt Cylindrical: Chuck 5 - 25 mm automatic feed: 0.008 - 0.04 mm per tool revolution Max. Tool length: up to 550mm Grinding wheel diameter: 203 x 10 x 32 mm number of revolutions: 2800 rpm Connected load: approx. 1.25 kW (400 V / 50 Hz) mass: approx. 94 kg Dimensions W x D x H: 520 x 900 x 1250 mm colour: green RAL 6011 Grinding wheel (standard): 230 x 50 x 123 mm speed: 2700 rpm weight: approx 490 kg

Year of construction: 1978, Condition: good (used), CHRISTEN drill grinding machine - with coolant device - approx. 8 grinding wheels Good condition fully functional can be inspected and tried on site. Shipping also abroad. Csb Heifgr Iebwa Regt Viewing : Basically, I would like to point out that to avoid misunderstandings, the item is welcome to be inspected and tested under power before purchase. Please ask questions before buying to avoid ambiguity. For general questions or to make an appointment for a viewing, I am, at the phone number below or above, always available. Errors in the description and subject to prior sale. VAT is shown separately on my invoices. Shipping with forwarding agent.

Year of construction: 1963, Condition: used, Drill grinding machine Fab.Rode + Dörenberg MAY type SS 75 A Cgjb Hbwenccx Hoa Ret

Condition: used, Year of construction: 1958, Technical details: drill diameter: min/max: 10 / 80 mm lip angle: min./max.: 70° / 100° ° Cgebsu U Icle Hbwa Rjt clearance angle: 7° ° grinding wheel speeds: 2100 U/min grinding wheel diameter: außen: 250 mm grinding wheel hole diameter: 150 total power requirement: 2,2 kW weight of the machine ca.: 950 kg dimensions of the machine ca.: L:1,3 x B:1,0 x H:1,4 m Spiral drill center grinding machine with “sludge box”. Grinding wheel stroke 60 mm Tool holder with special chuck, swiveled by hand 45° Point angle adjustable by loosening the clamping lever. *

Year of construction: 1996, Condition: used, drill diameter 3 - 50 mm drilling length 500 mm lip angle 90 - 140 ° voltage 380 V weight of the machine ca. 120 kg dimensions of the machine ca. 0,80 x 0,60 x 1,30 m Cgob Hbjp Raizewa Ret Serial-No.: 76658

Condition: new, ELMAG drill grinder DBG 832 W 8 - 32mm DBG - 3 in 1 The DBG series drill grinder is used for grinding twist drills made of HSS and carbide twist drills. The machine has integrated grinding stations for grinding the point angle, the clearance angle and for cross grinding. Special CBN or SDC diamond grinding wheels are used, which are to be used depending on the drill material. material. SDC coated grinding wheels Metal-coated synthetic diamond for sharpening carbide drills. CBN coated grinding wheels Deliver sensational sharpening results at very high speed and without annealing. The special thermal conductivity of CBN (boronite crystals) dissipates the resulting frictional heat into the wheel, preventing hardening of the cutting edge and virtually eliminating sparking. CBN has a higher thermal stability than diamond and is ideal for sharpening HSS tools due to lower wear. Optionally available: Grinding wheel SDC for DBG 832 W Order no. No. 61016 Collet chuck holder for Ø 31-32 mm for DBG 832 W Collet set (ER40) 2-piece, Ø 31-32 mm for DBG 832 W Now free of charge with both models Collet holder and collet set ER 20 or ER 40 ADVANTAGES CBN grinding wheel for HSS Adjustment device for center angle 95°-135 Clearance angle grinding function Cross grinding function Cob Hbot Hhg Nswa Regt For drill bits 8-32 mm 23 collets 8-30 mm TECHNICAL DATA Grinding range drill bit Ø 8 - 32 mm Grinding range point angle 95 - 135 ° Speed 4400 rpm Motor power 0.25 kW Mains connection 230/50 V/Hz Length 490 mm Width 250 mm Height 260 mm Weight 27 kg

Condition: used, Year of construction: 2001, Suitable for manual grinding and pointing of HSS or HM twist drills, step drills, reamers, countersinks, taps and milling cutters etc., both left and right cutting. Accessories: 1 six-jaw chuck, automatic feed, 3 cams. Grinding area: 12 - 80 mm grinding area: 4-50 mm Point angle 50 ° - 180 °: Number of cutting edges tip angle: 40° - 180° Point angle: 50 ° - 180 ° number of cutting edges: 1, 2, 3, 4, 5, 6 Number of cutting edges: 2, 3, 4 or 6 Dimensions W x D x H: 1100 x 1100 x 1600 mm feed: continuously from 0.4 - 4 mm / min. Connected load approx.: 1.3 kW (400 V / 50 Hz) Grinding wheel diameter: 300 x 70 x 127 mm Cgeb Hju Dmrasbwa Rot mass: about 350 kg Grinding wheel speed: 1420 rpm., colour: blue/white Connected load approx. 3.2 kW (400 V / 50 Hz): Weight approx. 1050 kg

Condition: like new (used), Year of construction: 1999, Brierley ZB 25, built in 1999, like new Drill diameter 1.5 - 25 mm Point angle 40 - 180° Cgsb Hbowcrh Ejwa Rjt Jaw chuck Flange Grinding wheel

Condition: good (used), Year of construction: 1983, Stock number: 2965-3 Manufacturer: WEDEVAG Year of manufacture: 1983 Machine number: 000115/83 Type / Model: WL 2 Grinding wheels: 203 x 10 x 32 mm Point angle: 60 to 180° Cgsb Hjv U Agkobwa Ret Diameter: 2.5 to 20 mm Speed: 2,800 rpm Dirty air requirement: approx. 5 bar Equipment: Base cabinet with extraction system Extraction system: SKF Tools Type: ADT 12 Floor area: 500 x 600 mm Table height: 500 mm Accessories/equipment: Condition: Good Complete weight: 170 kg Dimensions: 500 x 600 x 1,400 mm

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Cgob Hbwou Ng Ncja Rot Machine illumination available *

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm Cgob Hbjv E R Evowa Rjt * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: used, Year of construction: 1986, total width: 200 mm, total length: 1,400 mm, total height: 2,100 mm, outer dimension length: 1,400 mm, outer dimension width: 200 mm, Empty weight: 1.500 kg - Year: 1986 - Documentation available: No - Travel X: 30mm - Grinding diameter: 300mm - Table length: 420mm - Max. spindle speed: 2850rpm - Table width: 10mm Cjb Hbwaov Umfqe Rjgt - Min. spindle speed: 2800rpm - Tool holder: 18 - Transport dimensions: 1400mm x 200mm x 2100mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Bram van Summeren

Condition: used, Year of construction: 1996, Suitable for automatic grinding of twist drills (left- and right-cutting) with conical ground surfaces, countersinks, core drills, taps, etc. Accessories: Web thinning grinding device GA, Oscillating drive for even grinding wheel wear, Automatic infeed, Cutting device, Coolant system, Hexagonal jaw chuck. Grinding range: 3 - 50 mm point angle: 50 - 180° number of cutting edges: 2 - 3 - 4 - 6 Tool speed: 7 and 60 rpm Grinding feed rate: 0.4 - 4 mm/min Grinding wheel diameter: 200 x 40 x 51 mm Grinding wheel speed: 2815 rpm Ceb Hbwewakw Hea Rjgt Connected load approx.: 400 V / 50 Hz / 1.1 kW Dimensions W x D x H approx.: 830 x 980 x 1250 mm Weight approx: 560 kg colour: blue

Condition: good (used), Year of construction: 1987, Twist drill grinding machine Make: SCHANBACHER Type: S 3-50 Year of manufacture: 1987 Technical data: - simple operation - grinding by means of gear motor - twist drill dimensions 3 - 50 mm - point angle 90 - 140 ° - adjustable clearance angle - grinding motor 400 V / 0,25 kW - geared motor for swiveling movement 400 V / 0,12 kW - grinding wheel dimensions - 175 x 22 x 20/90 x 20 mm - space requirement approx. W 810 x D 570 x H 1260 mm - weight approx. 120 kg - with - clamping device - presetting device Cgjb Hbwaomnntmj Rjt

Condition: good (used), max drill diameter 32 mm Cgeb Hevxru Sjbwa Rot

Condition: used, Year of construction: 1984, Technical details: grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m Cgsb Hbsu Ng Irswa Ret The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: new, Bernardo drill grinding machine DG 32 Pro Specifications Drill diameter 2 - 32 mm point angle 90° - 135 Speed 4800 rpm Motor power 0,25 kW Voltage 230 V length 350 mm width 210 mm height 305 mm Weight approx. 32 kg Scope of delivery - Diamond grinding wheel SBC - Collets ER 20, 3 - 12 mm, 10 pcs. (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 mm) - Collets ER 40, 13 - 32 mm, 20 pcs (13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 25 / 26 / 27 / 28 / 29 / 30 / 31 / 32 mm) - Collet holder ER 20 resp. ER 40 Features - Including device for pointing, i.e. better centering of the drill tip on the workpiece and reduction of the necessary feed force - 30 pcs. ER collets included in the scope of delivery, which are also suitable for clamping intermediate sizes - Additional station for relief grinding of the drill cutting edges (clearance angle) - Universally adjustable point angle from 90° - 135 Cobogd H U Uo Hbwa Rogt - Rotor with precision ball bearing ensures very smooth operation - Fast and precise working results due to simple operation - Vibration-free running due to high dead weight and rubber feet

Condition: good (used), Functionality: fully functional, type of input current: three-phase, mount diameter: 50 mm, clamping range: 50 mm, - Drill grinding machine -used- - SCHANBACHER - S-3-50 - Grinding range 3-50mm Ceb Hsq Stq Nsbwa Regt - with WIDIA disk -without dresser- - Adjustable clearance angle - Three-dimensional grinding type - All drills are clamped in the same sleeve

Condition: new, Special offer price incl. shipping within DE (without islands) While stocks last Technical data: Drill diameter: 3 - 13 mm point angle: 90° - 140 Speed: 4800 1/min Connection: 230 V Motor power: 0,18 kW weight, approx.: 8,1 kg Dimensions, approx.: 320 x 180 x 190 cm Features: Cgsb Hbed R A Dcowa Rjt - Ideal for grinding HSS/hard metal twist drills. - Safe operation due to force-guided grinding process - Point angle adjustable from 90° - 140 - Compact design, with collet storage in the machine and handle for quick stowage - Including pointing device to reduce the feed force - Device for relief grinding of drill cutting edges to reduce friction between drill and workpiece - Rotor with precision ball bearing Scope of delivery: - Grinding wheel CBN - 11 collets ER 20, 3 - 13 mm - Collet holder ER 20

Condition: good (used), Year of construction: 1983, Offered here is a twist drill point grinding machine from the company Gühring of the type AS 417. Data: Manufacturer: Gühring Type: AS 417 year of manufacture: 1983
 small grinding wheel: Ø 6mm gr.grinding wheel: Ø 60mm weight: 0,3t max. workpiece length: 300mm accessories: Csb Hbog Rw Ntewa Rsgt 
Wet grinding device
 surface planer device machine light
 pneumatic workpiece clamping

Year of construction: 2007, Condition: ready for operation (used), Darex XT 3000 twist drill precision grinding machine Speed: 2850 rpm | 3450 rpm Cob Hbwasmmbrze Regt Weight: approx. 25Kg Mandrel size: 31.75mm Grinding range: 3-12mm , 12-21mm Point angle: 118° - 150°, stepless DAREX XT3000 Twist drill grinding machine with the modu- system for step drills countersinks You are welcome to visit us for an inspection. You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm workpiece length: 700 mm table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees Cob Hbeu Ng Hnjwa Rjgt - cutting speed of grinding wheel 25m / second - central lubrification - central coolant device The machine is including accessories see pictures! *

Condition: used, Year of construction: 1982, Technical details: dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min Cgobeu Ngxdo Hbwa Rjt height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm incl. accessories *