Used Paper Bags for sale (3,978)

Condition: used, Technical data feed hopper with hydraulic moving floor and bag opener for recyclables from yellow bags and residual waste: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was used at a large recycling plant, where recyclable materials from yellow bags or commercial waste were tipped into the hopper using wheel loaders, the bags were opened using the bag opener, and the recyclable materials were transported to a sorting plant or the commercial waste was transported in measured quantities for further processing. The system functioned flawlessly until it was dismantled and replaced with a larger system with higher throughput capacity. The machine was dismantled into individual parts in our workshop, partially overhauled, reassembled, and tested during operation. The following overhaul work was carried out and the following spare parts were replaced: Dismantling of the feed hopper and bag opener into individual parts. Cleaning, partial sandblasting, priming and painting of the steel parts. Various wear and cover plates were newly manufactured and installed. Cutting off the worn ends (approx. 40cm) of the push floor pipes. Welding on the new pipes and smoothing the push floor pipes. Replacement of all plastic sliding plates for the hydraulic push floor. Removal of the hydraulic unit from the push floor, emptying of the hydraulic oil tank, replacement of the oil filters, refilling with new hydraulic oil. Replacement of the three hydraulic blocks, all valves, the oil sight glass and all hydraulic hoses from the hydraulic unit. The seal kit and hydraulic hoses were replaced on all three hydraulic cylinders of the push floor. All six limit switches (proximity sensors) on the push floor were replaced. The conveyor chains on the left and right of the scraper conveyor were replaced. Seven carrier bars on the scraper conveyor were replaced. The drive motor for the ripper blades was replaced. All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and connections were replaced. All of the plastic sliding plates for the hydraulic operation of the bag opener were replaced. The bag opener can be moved vertically so that the system can also be used for commercial waste or residual waste without the bag opener. The side impact protection plates on both sides were replaced. Itedpfx Acey Urtfjreh Various wear parts of the bag opener have been replaced. The entire system has been rewired and reconnected. The system control in the control cabinet has been retrofitted by the manufacturer BRT Hartner to a self-sufficient individual control system and the standard programme has been reloaded into the control system. The system has been commissioned and tested by the manufacturer BRT Hartner, see the function video. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), KRAUSE cutting machine, cutting width 80 cm, with 3-4 spare blades & cutting strips. In working order and functional. Iodpfx Aezc Rtxocreth Minor adjustments may be necessary.

Condition: good (used), Year of construction: 1999, operating hours: 69,72,373 h, functionality: fully functional, PAPER STACKER LIFT Itedpfxey T Rh Sj Acreh

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 6972372, PAPER STACKER LIFT Iodsy T Rhrspfx Acrsth

Condition: like new (used), functionality: fully functional, Equipment: safety light barrier, User-friendly cutting activation via the patented two-stage operating elements EASYCUT. Particularly safe thanks to SCS – Safety Cutting System: IR safety light barrier on the front table and safety cover on the rear table; main switch and safety lock; two-hand cutting activation; 24-volt control; patented safety drive; automatic blade and pressure bar return from any position; disc brake for immediate blade stop; easy blade and cutting strip replacement; blade replacement device with a covered blade edge; blade depth adjustment from the outside. Electrically operated back gauge with touchpad, multilingual operator guidance, and digital dimension display. Dimension indication in cm / inch (display accuracy 1/10 mm). 99 programs with 99 program steps each (up to 15 chain measurements can be stored as one program step). Automatic program sequence during cutting. Direct dimension input via the numeric keypad. Integrated calculator (four basic arithmetic operations). Front table lighting with LEDs. Optical cutting guide with bright LEDs. Machine self-diagnosis with error display on the display. Electromechanical blade and pressure bar drive. Precision back gauge spindle. Back gauge rack with fine pitch and plastic sliders. Two side guides each on the front and rear tables. High-quality blade made of high-quality blade steel. All-steel blade carrier and adjustable blade guides. Stable all-metal construction. Standard equipment includes a base frame, a paper tray, and a practical, removable tool holder on the rear table. Collection possible, shipping available for an extra charge. Iedpfx Acjzc Icqerjth

Condition: good (used), Year of construction: 1995, SERIAL NUMBER: 6572818 Itjdey T Ig Eepfx Acrsh PAPIER STAPELLIFT

Condition: ready for operation (used), For sale: 1 x IDEAL 4850-95 EP cutter/guillotine/paper cutting machine, made in Germany, in good working condition. Isdpfozcyldjx Acroth

Condition: used, functionality: fully functional, Polar Mohr 78 ES Paper Guillotine Machine in very good condition, serviced, and ready for use. Made in Germany. Technical specifications: Cutting width: 780mm Stack height: 120mm LCD display Power supply: 400V Weight: 1400kg Side tables Chrome table surface Itsdpfxszccg Re Acrsh Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers Spare knife, cutting sticks, tapping block, and operating tools included. Includes vibrator.

Condition: used, Year of construction: 2010, machine/vehicle number: LC420, Used Sacmi Filling Line for Bag in Box, Up to 650 Bags/Hour Introduction to Efficiency and Precision The used Sacmi filling line exemplifies efficiency, targeting Bag in Box applications with up to 650 bags/hour capacity. Importantly, it stands ready for operation, facilitating seamless integration into production lines. Versatility in Container Handling of the Filling Line for Bag in Box Additionally, this machinery accommodates a variety of Bag in Box sizes, including 3 L, 5 L, 10 L, and if needed also for 20 L. This versatility ensures that producers can meet diverse market demands with ease. Innovative Filling Methodology Furthermore, the line employs a sophisticated gravity and light depression filling technique. Specifically, this approach is designed to handle still wine, optimizing quality preservation during the filling process. Operational Efficiency and Speed Itjdsvvh Suopfx Acreh Moreover, the filling line is engineered for maximum operational efficiency. It achieves remarkable speeds of up to 650 bags per hour. Consequently, this capability supports high-volume production requirements. Adaptability to Various Formats The machine’s format adaptability is a key feature, enabling swift changes between different Bag in Box sizes. Thus, it reduces downtime and enhances production flexibility. Gravity/Light Depression Filling Advantages Additionally, the gravity and light depression method minimizes wine oxidation risks. It ensures the wine’s organoleptic properties are preserved, maintaining product quality from filling to consumption. Technical Specifications for Optimal Performance of the Filling Line for Bag in Box The filling line’s technical specifications are tailored for still wine products. The gentle filling process safeguards the wine against agitation, crucial for maintaining taste and aroma integrity. Maintenance and Operational Readiness Regular maintenance checks are essential for sustaining operational readiness. The design facilitates easy access for maintenance, promoting efficient problem-solving and minimizing potential downtime. Enhancing Production Throughput Importantly, the ability to quickly adjust to different bag sizes enhances production throughput. This adaptability is crucial for meeting varied packaging requirements without sacrificing speed or efficiency. Conclusion of the Filling Line for Bag in Box In conclusion, the used Sacmi filling line for Bag in Box applications up to 650 bags/hour represents technical excellence. Its design prioritizes efficiency, versatility, and quality, making it an invaluable asset for wine bottling operations seeking to optimize their production capabilities while ensuring product integrity.

Condition: good (used), Year of construction: 2014, 1 x cutting drum Manufacturer: FERAG Model: SNT-50 Year of manufacture: 2014 Condition: good, in production until disassembly Iedpey Udadofx Acrsth Other used FERAG components, such as infeed and outfeed stations (including newer models) and SDB systems, are available. Just inquire!

Condition: good (used), Year of construction: 1997, 4-head drilling machine Ijdpezc Hbrjfx Acroth

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 87A, total width: 2,400 mm, total length: 10,500 mm, total height: 2,300 mm, cutting length (max.): 670 mm, type of input current: three-phase, overall weight: 9,000 kg, Holweg RS2 (42GL) Year 1988 Brand: Holweg Model: RS2 (42GL), modified for standard single-channel RS21 operation Year: 1988 For the production of flat-bottom paper bags, with or without gusset. Machine overhauled: new electrical components, new 3-phase main motor with frequency inverter, unwind station with new Renova Italy electronic brake system and dancer roller. Equipped with inline 4-color flexographic printer model IS 80, maximum print width 800 mm. Printing sleeves included: 4 x 220 mm, 3 x 320 mm, 1 x 370 mm, 1 x 380 mm, 4 x 400 mm, 4 x 430 mm, 4 x 440 mm, 1 x 520 mm, 3 x 520 mm, 3 x 580 mm, 6 x 660 mm, 3 x 680 mm. Gears: - 320 mm: 4 printing gears + 2 machine gears - 340 mm: 4 printing gears + 2 machine gears + 1 printer gear - 380 mm: 4 printing gears + 2 machine gears + 1 printer gear - 440 mm: 4 printing gears + 2 machine gears + 1 printer gear - 520 mm: 4 printing gears + 1 machine gear - 580 mm (290): 4 printing gears + 2 machine gears + 1 printer gear - 680 mm: 4 printing gears + 2 machine gears + 1 printer gear Forming plates: 1 x 90 mm, 1 x 120 mm, 1 x 140 mm, 1 x 150 mm, 1 x 170 mm, 1 x 180 mm, 1 x 200 mm, 1 x 240 mm, 1 x 300 mm. Itedpfsy Iclxsx Acroh Note: Gluing knives for different bag widths are not included. Printer shafts/adapters: 4 printer shafts included, compatible with the printing sleeves listed above. Perforation type. Max unwinder diameter: 1,200 mm Pneumatic shaft: 70 mm Max paper width: 900 mm Min–max bag width: 70–340 mm (current owner produced only one bag size: 140 mm width x 260 mm length) Cut-off length: 190–680 mm Min–max bag length: 180–670 mm Working speed: 400–800 bags/min (depending on bag size) Suitable paper: 30–70 g/m² Machine can be inspected in operation. Immediately available.

Condition: repair required (used), Year of construction: 1991, functionality: limited functionality, One color flexo printer for tissue Year: 1991 Itedpfxoy Iddvo Acreh Type: Fabio Perini 8930 Printing width: 2800 mm

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, machine/vehicle number: CK 898, total width: 2,100 mm, total length: 8,500 mm, total height: 2,300 mm, cutting length (max.): 560 mm, type of input current: three-phase, overall weight: 5,000 kg, W&H Matador 30 - CK 898 flat paper bag making machine, 1970s Brand: W&H Model: Matador 30 - CK 898 Year: 1970s Equipped with QMS 900 in-line printer (4 colors) Fitted with new printing cylinders, anilox rolls, and rubber rolls for all 4 printing stations. The electrical system has been replaced, and it features a new three-phase main motor with inverter, a mechanical and electric brake system, as well as a dedicated glue system with its own motor drive. Maximum paper width: 830 mm Maximum roll diameter: 1000 mm Inner core diameter: 70/76 mm Speed: 100–180 bags/min Forming plates: 115, 140, 190, 220, 300 mm Ijdpfoy Icv Dex Acreth Printing cylinders: 4 x 280, 2 x 350, 2 x 410, 2 x 480, 2 x 560 mm Machine can be inspected in production Available immediately

Condition: ready for operation (used), Year of construction: 2002, A Technibag bag-in-box filling machine for filling liquids into BIB bags is available. Products: wine/juice/etc., filling capacity: approx. 140/h, bag volume: 3l/5l/10l/20l. An on-site inspection is possible. Itedpszb Nlkefx Acrjh

Condition: ready for operation (used), Year of construction: 2010, Large semi-automated Pace cutting system Polar 137 XT-Autotrim with pile lifter, jogging system with count scale, gripper transport system, rotary gripper, and delivery unit Year: 2010 Approx. 5.43 million cuts Workflow: The material to be cut is raised to an optimal working height using a loading lift, placed into the jogger by the operator, automatically jogged, and then transported via the Autotrans gripper system from behind the jogger to the rear table of the high-speed cutter and rotated. After cutting, the Transomat automatically stacks the layers onto a pallet, allowing continuous cutting operations. Polar Stack Lift LW 1200-4 Platform size: 80 x 126 mm Load capacity: 1200 kg Equipped with steplessly adjustable photoelectric sensors for automatic lifting and lowering. Jogger RAH-4 with air removal roller and unloading for rear-table feeding Working format up to 75 x 105 cm Unloading of the jogged cutting material occurs automatically to the rear into the STR stacking rack. The Autotrans gripper transport system then handles layer transport onto the rear table of the high-speed cutter. Sheet scale – Polar count scale Avery Weigh-Tronix For creating quantity-accurate cutting layers Gripper transport system POLAR Autoturn – clamp transporter for rear-table loading and rotary gripper Takes over the prepared cutting layer from the stack rack or buffer table Itodpfoxd U Saex Acrjh Via air tables, which use air cushion for optimized material handling, the cut material is transported directly onto the rear table of the high-speed cutter and placed with precision. The cutting layer is held firmly by the grippers during transport, ensuring even pre-aligned layers remain precisely squared during movement. Cutting machine Polar 137 XT-AT with touch control And Autotrim function for automatic waste removal under the front table during cutting - Lowerable side gauge left (required for rear-table loading); also allows handling of formats with a diagonal of...

Condition: excellent (used), functionality: fully functional, Torsion-resistant gantry construction for precision and service life – Foot release Itedpfoyx Axajx Acrsh – Stack height 60 mm – Insertion depth approx. 100 mm behind the drills – Insertion width 480 mm – Drill length compensation – Hole diameter 2 – 20 mm – 1 to 4 drilling heads – Automatic table lift

Condition: used, functionality: fully functional, Year of construction: 2014, load capacity: 2,400 kg, Paper roll clamp Load center: 650 ISO class: ISO Class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully functional Technical condition: very good Description: Weight: 629 kg, Load capacity: 2400 kg / 650 mm, Roll range: 200 - 1300 mm, Mounting dimension: 228 mm, Suspension: FEM 3A. Good, ready-for-use condition, as returned by the previous owner. Ijdpfx Acjy Ih Ederjth Weight: 629 kg, Load capacity: 2400 kg / 650 mm, Roll range: 200 - 1300 mm, Mounting dimension: 228 mm, Suspension: FEM 3A.

Condition: used, J-Tec Big Bag Discharge Station Bigbag Discharge stations for big bags with vibrating hopper Iodpfx Ajy Nttpjcroth Height adjustable Max big bag dimensions: 120cm x 120cm x 280cm Overall dimensions: 180cm x 180cm x 345-500cm Material: Steel See our other listings

Condition: as good as new (ex-display), functionality: fully functional, Very nice paper cutter for sale. Brand: Eba, type 10/550 CNC. Equipped with a hydraulic pressing system, air table, light beam, geared mechanism, and manual operation, 220 volts. This machine comes from a government office and has been used very little. It is in as-new condition. You are welcome to test this machine at our location. We can arrange the transport and packaging for you and load it into a truck or container. Please inquire about a price including transport (location within the Netherlands). Itjdpfxozc I Exj Acreh Regards, Henk Hoos.

Condition: ready for operation (used), functionality: fully functional, color: green, Year of construction: 2008, operating hours: 1,000 h, The machine is being sold complete, including belt conveyor, handling unit, filling plant, and RC sack palletizing system. Comprises: Bakomat 4B handling unit, 10m³ hopper, conveyor trough type FR 600 x 1650, belt conveyor BTL 500x42,525, year 2005, belt conveyor BTL500/2/24-5.5m, year 2005, belt dosing scale Chrotec, vertical form-fill-seal machine Binder und Co, MK-X, 400 bags/hour with 25kg bags, approx. 13,000 operating hours, year 2005, sliding conveyor PD 2455/600, RC robot cell by Packmann d.o.o, year 2005, complete Kuka KR200 2E robot, robot year 2000, approx. 5,000 operating hours, pallet wrapping machine Plator LCN. All existing plans related to dimensions and further information are available in the attached PDF. Products produced: - Fine chippings 1-2mm - Fine chippings 2-4mm - Chippings 4-8mm - Premix chippings/sand - Play sand 0-2mm Iedpfx Asvw Urwjcroth - Washed sand 0-4mm - Scented play sand - Concrete gravel 0-16mm - Rounded gravel 8-16mm

Condition: excellent (used), For sale: Professional, heavy-duty bookbinding guillotine from Franz Pytlik Maschinen, Nürnberg. Robust cast iron construction designed for precise cutting of large formats in binderies and printing houses. The machine offers an impressive cutting width of 112 cm, enabling the processing of oversized sheets. The worktable depth is 72 cm. The knife mechanism operates smoothly and effortlessly, while the rear guide, adjustable via handwheel, allows for accurate format positioning. Specifications and features: – Manufacturer: Franz Pytlik, Nürnberg (Germany) – Type: manual bookbinding guillotine – Cutting width: 1120 mm – Table depth: 720 mm – Heavy-duty cast iron frame – Cutting lever with wooden handle – Rear guide adjustable by handwheel – Large, stable work surface – Lower shelf for sheets and tools – Knife in good condition (can be resharpened) Technical condition: The machine is complete and fully functional. All mechanisms operate correctly. Itjdpfxoy Nmycs Acroh Normal signs of use – no play and no structural damage. Ideal for use in a bindery, printing house, technical workshop or model making studio.

Condition: excellent (used), Year of construction: 2010, ZENTEX PPH 5 baler is a device for compacting and crushing cardboard and foil. The baler makes it possible to reduce the volume of waste material and is ideal for warehouses, wholesalers and logistics companies. The cardboard baler is equipped with a swing door, maximum bale size 70x50x45 cm. Pressing time including return stroke 23 s. Advantages of the Zentex PPH 5 carton press: - Reduced volume of waste going to recycling - Saves time spent on waste management - Equipped with a module to compact paper and film - Prevention of space restriction by stored cardboard and foil in alleys and aisles. The offer concerns the Zentex PPH5 waste paper and film baler : Iedondcxgepfx Acrsth - Manufacturer: ZENTEX - Product condition: used - Year of manufacture : 2010,2012,2013 - Model: PPH5 - Width: 84 cm - Depth: 72 cm - Height: 207 cm - Weight: 360 kg - Power: 1500 w - Voltage: 400 v Net price : 1890.00 euro each year of manufact. 2010 (Product code: MTP000234) 1990.00 euro each year of manufact. 2012 (Product code: MTP000235) 2090.00 euro each year of manufact. 2013 (Product code: MTP000236) The Zentex PPH 5 cardboard compactor is a professional device that effectively reduces waste. It bales waste into ready-to-collect bales, which are double-bound by strapping. The baler is ideal for companies with small quantities of waste, small wholesalers, food shops and clothing shops. * Large quantities available, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: excellent (used), For sale: Compact, precision Boway R520V guillotine. Ideal for small print shops, binderies, and graphic arts facilities. The machine is in very good technical condition and ready for operation. Technical data: Maximum cutting width: 520 mm Electronic control with display Hydraulic drive for blade and clamp Safety light barriers Itedpfx Aoxtwqwocrjh Solid, stable construction Cut counter and adjustable clamp pressure

Condition: excellent (used), Year of construction: 2007, cutting width (max.): 92 mm, Equipment: safety light barrier, Wohlenberg Protez 92 Air table Photoelectric sensors Spare knife Clamps (Schplaty) Manual Itjdpfowzyc Isx Acrjh