Open mouth bag filling line for peat

TIULMAX PUDAS-NB

Condition: refurbished (used), Year of construction: 1991, Components of an asphalt mixing plant TELTOMAT mixing material silo with bucket elevator Screen and drying drum 2-shaft compulsory mixer 30,000 L heating oil tank AMECO filter system Bitumen tanks Silos with screw conveyor Ndedpfxjtph A No Aa Aod

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Ndodpju Thbxefx Aa Aed Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2024, condition: new, The manual bottle filler is specially easy to use. The filling mechanism works on the basis of gravity. The handle is pulled down and the strong stream of liquid flows out of the head. Capacity – 600 pcs. of 0,5 L bottles per hour. The bottle filler is completely made of stainless steel. Ndodsizbb Hjpfx Aa Ajd Gravitational mechanism provides a strong stream as well as easy and effective work. Comes with a buffer tank for fluid. Buffer tank has an integrated flowmeter which helps to follow the liquid level on the buffer tank. Suitable for various liquids that are similar to water consistency such as juice, wine, vodka, etc. Mounted on the pivoting wheels.

Condition: excellent (used), Swing over bed 320 mm Distance between centers 800 mm Spindle speeds -4000 rpm Control: HEIDENHAIN Manual Plus M Nodji Ezhqepfx Aa Aedd Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), ein ausgesprochenes Einzelstück,ca.12x6 m Ndedpfjfi Tmcex Aa Asd

Year of construction: 2025, condition: new, Multifunctional screening plant SBS 1520 F3 developed from more than 30 years of experience and already sold more than 650 pcs. Sand screening, cable sand making, compost screening, construction waste screening, recycling material screening, topsoil screening, excavation screening, wood chips screening, gravel screening, coal screening, scrap screening,slag screening, humus screening, asphalt screening, milled material screening Standard version - according to the following technical description: 1 screening box with feed hopper and 2 screening decks Screening deck according to your requirements 1 unbalance motor 1 rubber screen brake 1 side discharge belt 1 box as machine frame incl. forklift lug and crane eyes 1 additional chute at the feed hopper, to extend the screening area ----- 8 steel springs for optimum screening and screening intensity ----- 1 control cabinet with FI circuit breaker, emergency stop button and phase inverter for turning the screening direction Technical data: 2 deck screening plant upper deck: 2000 x 1500 mm lower deck: 2000 x 1500 mm 3 - fractions weight : 1500 kg Drive : 400 V / 1,1 kW / ( 16 A ) Ndodpfjgmibvjx Aa Aod Transport dimensions: Width : 1550 mm / with belt 2000 mm length : 2850 mm Height : 2680 mm Conveyor belt 0,75 KW length : 2900 mm Width : 300 mm You are welcome to visit and test the screening plant at our stockyard in Rodgau Weiskirchen.

Condition: excellent (used), Year of construction: 2001, For sale LVD PPEB 80/25 in very good technical condition. Under power, can be inspected any time Ndjdpfx Aasrx S Hns Ajd

Condition: ready for operation (used), Year of construction: 1982, travel distance X-axis: 1,650 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, table load: 3,500 kg, Mitutoyo 3-axis DRO Ndjdpfxjwxyzfe Aa Asd table 2000 x 700 mm travels 1650 x 1000 x 1000 mm automatic lubrication spindle taper SA 40, maximum spindle speed 2066 rpm weight 7500 kg

Condition: used, Year of construction: 2009, operating hours: 20,536 h, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, empty load weight: 16,000 kg, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 20,536 hours, as of September 2024 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Ndjdpfxeu Thype Aa Aed Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine is currently in our workshop undergoing partial refurbishment. We expect the refurbishment work on the machine to be completed by the end of October, after which the machine will be tested and released for sale.

Condition: excellent (used), Surface grinding machine SAACKE Nedpfx Aajhpqf Us Aedd Grinding head with angle adjustable