Used Paper Slitter for sale (2,463)

Condition: good (used), Uchida Aero Cut One Creaser, Slitter, and Cutter The machine is fully operational and ready for production. Description: The AeroCut One cuts, perforates, and creases sheets in a single pass. Only one person is needed to operate the device, significantly improving work efficiency and, consequently, reducing costs. The device is programmed using an intuitive touchscreen control panel. Cutting, creasing, perforating Maximum paper size – 370 x 520 mm Min. paper capacity – 55 x 45 mm Maximum grammage – 400 g/m² Speed ​​– 11,130 business cards/h Paper types – offset, coated paper, varnished Feed – belt with adjustable vacuum Creasing – strip-type Memory – 263 programs + 150 user-defined Touchscreen programming Kwsdpjyrz Raefx Abcow PC connectivity Double-feed detection Weight: 240 kg Power supply: 230 V Made in Japan.

Condition: ready for operation (used), Year of construction: 2007, - User-friendly operation - Graphic display with separate LED indicators Kwjdpfxeywfclj Abcow - Microprocessor control of all functions The following suction plates are included in the scope of delivery: Type 62, for paper weights of 60-90g/m² Type 85, for paper weights from 110g/m² Type 107, for paper weights of 80-110g/m² (currently installed in the machine) Optional suction plates of type 60 and 201 are available at an extra charge. Counting speed: from 500 to 2,000 sheets per minute Maximum total counter reading: 999,999 Material range: 25-240g/m² depending on paper quality and type Batching/insertion options: from 2 to 9,999 Maximum sheet size: A3 Minimum sheet size: 60 x 110 mm Maximum stack height: 230 mm Machine dimensions (HxWxL): 752 x 600 x 982 mm Net weight: 114 kg Electrical connection data: 230V 50/60 Hz; 115V 50/60 Hz Technical specifications according to the manufacturer (subject to change) Note: The following maintenance tasks were performed during the last service: - Complete cleaning of the vacuum system - Bearing of the separating finger replaced - Counting timing readjusted - Table flap renewed

Condition: excellent (used), Year of construction: 2018, operating hours: 10 h, functionality: fully functional, Automatic toilet paper and kitchen towel packing machine We have used it for less than 10 hours. After purchase, it did only a couple of test runs and then was stored in a dry warehouse for later use. It had never been used since. There might be some bends on the machine since it has been moved a couple of times. Specification Power 220V 50Hz Packing: Toilet paper 2/4/6/8/10 rolls per pack with handle, Hand towel 2/4 rolls per pack with handle Packing in film, overwrapping with meld line on the back. It uses opp film, a max roll diameter of 30cm, and a thickness of 0.03 - 0.10 by the specification, no idea about other materials - have not tested any. Kwjdpfx Asuyhf Hjbcew For setting up and configuration the machine you will have to contact the manufacturer The machine can be seen, powered on, and set to automatic/manual running. User manual is available, have videos from the manufacturer only

Condition: used, Year of construction: 1998, input voltage: 230 V, Nagel Citoborma 280 two-spindle paper drilling machine Connection voltage: 230V Kwodpfxjyvt T Aj Abcjw

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, cutting width (max.): 1,150 mm, insertion depth: 150 mm, cutting length (max.): 1,150 mm, overall weight: 3,000 kg, total width: 2,650 mm, Cutting width: 1150mm, max. format: 1150mm/1150mm, max. stack height: 120mm, min. cutting format: 20mm, pressing force: 40kN, cutting speed: 42 cuts/min, machine dimensions X/Y/Z: approx. 2650mm/2650mm/1700mm, weight: approx. 3000kg, control: MCS-2 TV LCD. On-site inspection is possible. Machine in working order. Available in the second half of April. Kodpfeywnlpjx Abceww

Condition: good (used), Year of construction: 1999, functionality: fully functional, cutting width (max.): 780 mm, Paper cutting machine Schneider Senator 78 E-Line, working width 78 cm, programmable control, air table, light barriers Kjdpfx Absyu Ii Uocoww

Condition: used, Manufacturer: EDA Kodpjyq Nrcefx Abceww Overall dimensions: 6600x1400x(1700 mm high) The equipment is not operational; it does not work due to a hydraulic issue!

Condition: used, Year of construction: 2015, Manufacturer: HSM Model: HL 4010 Re Year of manufacture: 2015 Kwsdpfx Abjyq Nqrocsw Pressing force: 40 t

Condition: used, Year of construction: 2013, pressing force: 40 t, Manufacturer: HSM Model: HL 4010 Re Year of manufacture: 2015 Kodpfxoyq Ngts Abcjww Pressing force: 40 t

Condition: excellent (used), Year of construction: 2025, operating hours: 1,260 h, functionality: fully functional, machine/vehicle number: 548, inner diameter: 38 mm, cutting length (max.): 4,000 mm, The core winding machine is designed for the production of 25-layer paper tubes with an internal diameter ranging from Ø 38 to Ø 250 millimeters. 3-year warranty. Kwedpfx Ajyvgcvebcjw

Condition: ready for operation (used), Year of construction: 2005, operating hours: 12,621 h, cutting width (max.): 76 mm, Equipment: compressor, documentation/manual, safety light barrier, Perfecta 76 UC Ksdpfx Aoyv A Suebcjww 2005 program number of cuts:108.000 German language program, German language book.

Condition: good (used), Year of construction: 1996, cutting width (max.): 920 mm, cutting length (max.): 920 mm, The following services and repairs were performed: Ksdpfx Aboyuydkjcjww - New color display - Hydraulic oil change: 02/2026 - Gear oil change: 02/2026 Year of manufacture: 1996 Working width: 920 mm Stacking height: approx. 120 mm Air table: Yes Light barriers: Yes Total number of blades: 2 Documentation: Yes, copy of the operating manual Blade changing device: Yes

Condition: used, Year of construction: 2018, functionality: fully functional, Horizon HT-30C (Used) Year: 2018 Specifications Kedpfx Asym E Ewebcoww Untrimmed Book Size: Max. 320 × 235 mm / Min. 204 × 136 mm Finished Book Size: Max. 305 × 230 mm / Min. 200 × 134 mm Trim Width: Max. 99.9 mm / Min. 2.0 mm Trim Height: Max. 51 mm Book Stack Height: Max. 300 mm Production Speed: Up to 440 books/hour (25 mm thick, 2 books stacked) Up to 500 books/hour (10 mm thick, 5 books stacked) Voltage / Frequency: 3-phase 200V / 50–60 Hz

Condition: good (used), Polar Mohr 78 ED Paper Guillotine Very low mileage, very good condition. The machine was purchased from a school workshop and has not been used in production. Technical specifications: Cutting width: 780mm Stack height: 120mm Color LCD display Power supply: 400V Weight: 1400kg Enlarged side tables Kwjdpfsynfwiox Abcjw Chrome table surface Table backlight and optical cutting line Flexibly adjustable clamping force Spare knife, cutting sticks, tapping block, and operating tools.

Condition: used, functionality: fully functional, Year of construction: 2009, load capacity: 7,500 kg, construction height: 1,200 mm, empty load weight: 1,620 kg, Paper roll clamp Load centre of gravity: 650 ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Kodpfx Abou Dy Hkocoww Technical condition: very good Description: Arm height: 1x 1290 mm 2x 515mm, opening width 420 / 1,300 mm, rotation range 360 endless Arm height: 1x 1290 mm 2x 515mm, opening width 420 / 1,300 mm, rotation range 360 endless

Year of construction: 2009, condition: excellent (used), functionality: fully functional, machine/vehicle number: 04090810, Equipment: type plate available, AutoTurret ABG Vectra+ slitter Ashe. Width 410mm. Slitting 25, 41, 76mm. Automatic roll ejection. Glueless. Good condition. Magnetic cylinders: 96, 99, 102, 104, 108, 110, 111, 114, 116, 120, 124, 130, 131, 135, 136, 138, 140, 141, 144, 147, 151, 154, 156, 167, 168, 180, 185 Kjdswyvf Aepfx Abcjww

Condition: used, Year of construction: 1992, Paper jogger Polar RAH 6 Year: 1992 Description - Air removal roller Kwedpfxoyu Tdws Abcew - Delivery to the left and right

Condition: good (used), Horizon APC-T61 Hydraulic guillotine The machine is practically new, fully operational, ready for production. High-performance, precise hydraulic cutter – for small and medium-sized printers, bindery and digital printers. Equipped with programmable control, designed for low-cost, frequently changing orders. Control: Ability to save programs to memory electronic digital display with an accuracy of 1/10 mm starting the program with the „start” button Knife beam and hydraulic pressure drive cutting line pressure plate for cutting delicate materials foot pedal for measuring the pressure safety covers on the rear table Technical data: Cutting length 610 mm Ksdjymxp Ajpfx Abceww 620 mm batch depth Pile height 100 mm Power supply 380V / 50Hz 3 kW power Weight 700 kg The set includes: spare knife, shaft, operating tools, tapping block, manual.

Condition: good (used), Perfecta 132 TS Paper Cutting Guillotine The machine is in very good condition and ready for production. Manufactured in 2008. Available immediately from stock. The guillotine can be used as a standalone unit or integrated with cutting systems. Program generation is menu-driven and includes a variety of cutting tasks, such as single cut, programming, multiple cuts, non-cutting hold-down, and automatic actual value transfer. Perfecta premium cutting machines are manufactured in Bautzen, Germany. Perfecta Machine Features: – Interactive User Interface – 18.4” Touchscreen – USB Interface – CIP Data Module Kwedpfx Abeymxm Iecow – Positioning via Electronic Handwheel – Programmable Holding Pressure – Automated Knife Change from the Front – Quick Knife Change – New Machine Body Cast in One Piece = Increased Stability – Maintenance-Free Electromagnetic Clutch Technical Data: Cutting Length: 1320 mm Maximum Stack Height: 165 mm Infeed Depth: 1325 mm Minimum Cutting Capacity with Sheet Metal Under the Pressure Beam: 77 mm Minimum Cutting Capacity Without Sheet Metal Under the Pressure Beam: 20 mm Maximum Saddle Feed Speed: 300 mm/s Maximum Mechanical Knife Capacity: 44 Cycles/Min Saddle Guidance: Over the Work Table Power Main motor: 4.5 kW Net weight: 3410 kg The machine includes a spare knife, cutting sticks, a pressure plate, documentation, and tools.

Condition: good (used), Perfecta 76 UC Paper Cutting Guillotine This machine is in very good condition. It has been in one hand since new. Technical specifications: Cutting width: 760mm Stack height: 110mm Weight: 1650kg Power supply: 400V Equipment: – LCD programmer – photocells – air table – cutting line – hydraulic clamp with variable force adjustment Kjdeymxmzopfx Abceww – manual – tool kit – clamp plate – spare blade

Condition: good (used), Perfecta 92 TS ASE Paper Cutting Machine The machine is in very good condition, manufactured in 2011. This machine features a waste removal system. A unique machine on the market. Owned by the same company since new. Under a service contract until the very end. Technical Specifications: Cutting Width: 920 mm Stack Height: 120 mm Weight: 2000 kg Power Supply: 400V Equipment: – ASE Automatic Waste Removal System with conveyor belt (automatically divided work table) – Programmer with 19” touchscreen monitor – CIP-3 and CIP-4 operation, cutting visualization on the monitor – Memory expansion via USB, network connectivity – Photocells – Air table – Cutting line – Chrome-plated table surface – Enlarged side tables – Servo-driven rear saddle control – super-fast operation, always stops at „0” – Hydraulic clamp with smooth force adjustment – User’s manual – Tool set – Press plate Kedpsymxmnsfx Abceww – Tapping block – Spare knife

Condition: good (used), Mohr D 80 ECO Polar Guillotine Manufactured in 2012. Very good condition, ready to operate. Mohr Polar is the most recognizable and respected brand of bookbinding guillotines in the world. Made in Germany. Working width: 800mm Stack height: 100mm Machine weight: 1000kg Power supply: 380V Equipment: Programmer with a 5.5″ display and the ability to save 198 programs Chrome-plated table Air table Photocells Intuitive operation Documentation, tools, spare blade, and a safety blade change tool. Kjdpfoymxmbjx Abcsww

Condition: good (used), Polar Mohr 78 X Paper Cutting Guillotine Machine has been serviced and is ready to use, in perfect condition. Manufactured in 2008. Technical specifications: Cutting width: 780mm Stack height: 120mm 15″ LCD display 400V power supply Weight: 1400kg Side tables Ksdpfxeymxl Rj Abcjww Chrome table surface Table lighting and optical cutting line Continuously adjustable pressure Additional rear table covers. Spare knife, cutting sticks, tapping block, and operating tools.

Condition: good (used), Robust 800 Roll-to-Sheet Slitter Machine in very good condition, ready for production. Slitting and cross-cutting machine, roll-fed. Sheeter Ideal for bookbinding veneer, paper, canvas, eco-leather, PVC, plastics, self-adhesive foil, etc. Easy format setting, computer control. Manual and automatic operation. Technical specifications: Total power: 3.5 kW Working width: 800 mm Kwedoymxl Djpfx Abcow Maximum roll diameter: 600 mm Maximum roll weight: 250 kg Feeding/cutting length controlled by computer Working speed adjustable via inverter Approximate dimensions (L x W x H): 1970 x 1310 x 1400 mm Weight: approx. 1100 kg Includes a sheet outfeed table.

Condition: good (used), IDEAL EBA 5560 Hydraulic Guillotine A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, intuitive and simple to operate, yet with the performance of a large industrial machine. The machine was used in an office and is the latest product from the German manufacturer Ideal. Control: 99 programs, each with 99 steps Data entry via LCD touchscreen Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Kodpeymxlkjfx Abceww Switching mm/inch Hydraulic knife and pressure beam drive Photocells Side tables Cutting line Technical data: Cutting length: 550 mm Infeed height: 95/92 mm – with under-beam bar Infeed depth: 570 mm Front table depth: 460 mm Minimum final cut: 32/60 mm – with under-beam bar Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 369 kg Dimensions: 1520 x 1400 x 1370 mm