Used Picker for sale (229)

Condition: excellent (used), Year of construction: 2005, Arburg 320A 500-170 with the sprue picker / electric machine Year of manufacture: 2005 Injection unit: Screw diameter: 35 mm Ibjdpfx Agjz Iqxhsyec injection weight: 105 g Injection pressure: 1470 bar Metering volume: 115 ccm Clamping unit : clamping force: 50 t tie bar distance: 320x320 mm size of clamping platens: 446x446 mm ejector: electric clamping unit: toggle lever Control system: SELOGICA Additional equipment: Electric machine: high speed, energy saving and very quiet. Euromap 67 Robot interface injection unit hardened - bimetal Central lubrication Machine with the built-in conveyor belt Arburg and original sorting flap Dimensions: Weight: 3500 kg Length/width/height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating power: 5,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: FN531056, load capacity: 1,000 kg, empty load weight: 2,727 kg, lifting height: 3,810 mm, construction height: 2,430 mm, operating hours: 239 h, Jungheinrich EKS 210 high-lift order picker, year of manufacture 2017 with duplex mast Specifications: Jungheinrich EKS 210 Year of manufacture: 2017 Recorded operating hours (h): 239 Mast type: Duplex Lift height (mm): 3810 Free lift (mm): 850 Overall height (mm): 2430 Ibsdpfxjy H Exrj Agyoc Load capacity (kg): 1000 Fork length (mm): 900 Own weight (kg): 2727 Front tyres: Polyurethane Rear tyres: Polyurethane Battery year: 2017 Battery capacity (Ah): 465 Battery voltage (V): 48

Condition: new, functionality: fully functional, New unit Enmair Electropneumatic core puller ER Immediately available from stock ER series, Type 650 Application range from 5 to up to 150 to (depending on the design) – injection molding machine Horizontal travel: 650 mm Vertical travel: 125 mm Swivel angle: 5 degrees Gripper angle: [value missing in original text] Lifting weight: approx. 3 kg A bracket on the rear allows for easy adjustment of the swivel angle to the right or left, as needed. Required operating air pressure: 5 - 7 bar Iodpor A D Itofx Agyebc 220 V, 50 Hz Depending on the pre-existing equipment on the injection molding machine, the unit can be offered with an Euromap 12 or Euromap 67 connector. Operating interface: English, Dutch

Condition: excellent (used), Year of construction: 2002, Arburg 420C 1300-675 with the sprue picker Star Year of manufacture: 2002 injection unit: Screw diameter: 50 mm injection weight: 297 g Injection pressure: 2080 bar Metering volume: 353 ccm Clamping unit: clamping force: 130 t tie bar distance: 420x420 mm size of clamping platens: 605x605 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - bimetal Type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Covers from the operator side open automatically Dimensions: Weight: 4330 kg Length/width/height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW Ibjdpfxsz Ip A So Agyoc All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2017, Available: 2 pieces! condition to check Possibility to buy the high-lift order picker with a set of brand new batteries with a 2-year warranty for 3,500 euros or for 3,000 euros with used batteries Year of production 2017 Load capacity 215 kg Lifting height 3000 mm Travel speed 8 km/h Total length 1528 mm Battery voltage 24V Model EKM-202 Negotiable with larger quantities, big discounts! Iedpfjvday Hsx Agyobc The agile and versatile EKM order picker is ideal for use in stores, for light maintenance work or order picking without a pallet. The stable mast allows you to lift items up to the third level of the rack - this is the best alternative to a traditional ladder. Automatically closing doors ensure operator safety even at high lifting heights. A sensor mat on the floor increases mobility in the driver's cabin, so the operator can freely choose his position on the standing platform. The spaciously designed workspace guarantees the operator greater comfort while driving and standing sideways. Good visibility in the direction of travel is provided. Ergonomically positioned controls allow simultaneous lifting and steering, which makes working with the EKM very efficient.

Condition: excellent (used), Year of construction: 2022, Krauss Maffei KM 50-55 CX hydraulic injection molding machine Year of manufacture: 2022 STAR picker Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" control panel with a color touch screen. Plasticizing unit Complete plasticizing unit for thermoplastics with a screw diameter of 18 mm, with a backflow valve and an open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Clamping unit - Clamping force: kN 500 - Opening force: kN 40 - Dimensions of the mounting plate (h x v): mm 600 x 600 - Distance between columns (h x v): mm 370 x 370 - Mold opening stroke: mm 400 - Minimum mold height: mm 200 - Opening width: mm 600 - Ejector stroke: mm 100 - Ejector force forward/backward: kN 23 / 10 Injection unit - Screw diameter: mm 18 - Ls/D ratio: - 22.2 - Injection pressure: bar 2500 - Injection volume: cm3 20 - Injection shot weight 1): g 19 - Injection speed: mm/s 150 - Injection rate standard: cm3/s 38 - Screw speed, standard: rpm 450 - Plasticizing capacity 1): - at standard screw speed: g/s 4.0 Electrical and hydraulic equipment - Rated power of the pump motor: kW 11 - Installed power of the heaters: kW 3.8 Ijdpfezhwl Rsx Agyebc - Number of cylinder heating zones: - 4 - Dry cycle time / stroke according to Euromap 6 2): s/mm 1.2 / 259 - Oil tank capacity: dm3 180 Dimensions and weight - Net weight with control cabinet: t 2.55 - Machine dimensions (l x w x h) 3): m 3.53 x 1.41 x 1.96

Condition: used, Year of construction: 2011, Gyárto: Wittmann tip: W702 Gyártási év: 2011 A berendezés teljesen működőképes, megtekinthető és kipróbálható! programozó kezelő nélkül !! Iedsvyhqxjpfx Agyobc

Condition: used, Year of construction: 2010, Injection moulding machine Arburg 370H 600-290, year 2010, incl. Wittmann picker Injection moulding machine Arburg 470C 1500-400, year 2006, incl. Wittmann handling Isdpfx Aoy R Tg Eegyobc

Condition: new, machine/vehicle number: 25469, Year of construction: 2023, operating hours: 1 h, load capacity: 135 kg, lifting height: 2,850 mm, fuel type: electric, mast type: simplex, construction height: 1,414 mm, .: 25469 Device details: Year of manufacture: 2023 Load capacity: 135 kg Ibedpfx Agstw Dc Nsyoc Lifting height: 2850 mm Recorded operating hours: 1 h Mast type: Standard Mast height: 1414 mm Length/Width/Height: 1525 / 750 / 1414 mm Operating weight: 630 kg Additional device information: ---- The operating hours stated are generally read from the device. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments and sweepers available immediately for you. Of course, also for rent! We are happy to buy your OLD one. If you have any questions? During our business hours from 7:30 am to 4:00 pm you can reach us. We look forward to hearing from you! We speak English Subject to prior sale and errors for this offer. In the dealer business the device is sold in its current condition, not refurbished. All information without guarantee; subject to errors and changes.

Year of construction: 1995, condition: used, COMI SL2000 x 900 x 550mm Thermoforming Machine. S/No. 646 (1995) TECHNICAL DATA OF THE EQUIPMENT Max. frame inner size mm 2005 x 905 Scrap cutter motor power kW 3 Max. tool base size mm 2000 x 900 Scrap conveyor motor power kW 0.37 Min. tool base size mm 700 x 500 Finished workpiece discharge belt motor power kW 0.75 Max. sheet size mm 2090 x 960 Cross-cutting motor power kW 0.25 Min. sheet size mm 790 x 560 Cross-cut scrap conveyor motor power kW 0.22 Max. tool height mm 800 (550+250) Transfer unit motor power kW 1.5 Maximum formed workpiece height mm 550 Auxiliary units max. consumption kW 5.10 Max. sheet stack height mm 1000 Max. installed power kW 375 Iedpoz I Sbdsfx Agyobc Max. pallet height mm 180 Tempering unit power kW 52 Upper heating power kW 83.3 Power consumption at 70% load kW 262.5 Lower heating power kW 71.3 Vacuum pumps capacity m3/h 750 (250x3) Upper preheating power kW 52 Tool vacuum tank capacity L 2000 Lower preheating power kW 46.8 Bell vacuum tank capacity L 2000 Oil pump motor power kW 19 (15+4) Required oil quantity L 600 Vacuum pump motor power kW 23.4 (7.8x3) Required air pressure kPa 600 Sheet centering motors power kW 0.24 (0.12+0.12) Incoming water pressure kPa 200-300 Sheet feed motor power kW 2.2 Max. hydraulic operating pressure MPa 18 Sheet feed width-adjustment motor power kW 2.2 Hydraulic operating pressure MPa 10 Sheet picker motor power kW 0.37 Incoming water temperature °C 12-20 Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), functionality: fully functional, Year of construction: 2021, Manufacturer: Jungheinrich Type: ERE 225 Year of manufacture: 2021 Design: Low-lift order picker Drive type: Electric Load capacity: 2500 kg Year: 2021 Hours: 7443 Condition: Used Fork length: 2400 mm Isdpfezr Ifvsx Agyebc WITHOUT CHARGER! Price: Net, plus VAT.

Condition: excellent (used), Year of construction: 1999, Arburg 420C 800-250 with the sprue picker anvil+long leg Year of construction: 1999 Injection unit: Screw diameter: 40 mm Injection weight: 158 g Injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit : Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping platens: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Control system with air valve Core pull control Hardened injection unit - bimetal Dimensions Weight: 3180 kg Length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating output: 6.5 kW Total output: 21.5 kW All offered machines are started by our service technicians before sale. Ibedpfx Agoz Iq Enoyjc It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: like new (used), Year of construction: 2022, operating hours: 454 h, load capacity: 1,500 kg, lifting height: 5,400 mm, fuel type: electric, mast type: triplex, construction height: 2,400 mm, Manufacturer + model: ACTIL N 15 S - TTFY Mast: 3F5400 ID: 26064.0363 Category: Demo Mast: 3F5400 Iedpfx Agszv R Dcsysbc Lowered height: 2400 mm Lifting height: 5400 mm Capacity: 1500 kg Year: 2022 Hours: 454 hours Capacity: 24V / 775Ah Options: DEMO!! MINI forklift - Order picker - Counterbalance stacker (3-in-1!!) - Dual controls - Triplex mast - FFL mast - Stainless steel and fork spreader - Tilting fork carriage - Spotlights - 2 x Blue Spot lights - with cantilevered forks - SUITABLE for all types of pallets - POWER STEERING

Condition: used, Year of construction: 2007, used to produce innerliners Equipment Specifications Summary Forming and Tool Dimensions Maximum frame inner size: 2005 × 905 mm Maximum tool base size: 2000 × 900 mm Minimum tool base size: 700 × 500 mm Maximum sheet size: 2090 × 960 mm Minimum sheet size: 790 × 560 mm Maximum tool height: 800 mm (550 + 250 mm) Maximum formed workpiece height: 550 mm Maximum sheet stack height: 1000 mm Maximum pallet height: 180 mm Heating System Upper heating power: 83.3 kW Lower heating power: 71.3 kW Upper preheating power: 52 kW Lower preheating power: 46.8 kW Drive Motors & Auxiliary Equipment Oil pump motor power: 19 kW Vacuum pump motor power: 23.4 kW Sheet centering motors power: 0.24 kW Sheet feed motor power: 2.2 kW Sheet feed width-adjustment motor power: 2.2 kW Sheet picker motor power: 0.37 kW Fan motor power: 5.5 kW Shear motor power: 2.2 kW Carriage motor power: 2.2 kW Rotary table motor power: 1.1 kW Scrap cutter motor power: 3.0 kW Scrap conveyor motor power: 0.37 kW Finished workpiece discharge belt motor power: 0.75 kW Cross-cutting motor power: 0.25 kW Cross-cut scrap conveyor motor power: 0.22 kW Transfer unit motor power: 1.5 kW Auxiliary units maximum consumption: 5.1 kW Tempering unit power: 52 kW Electrical Requirements Maximum installed power: 375 kW Power consumption at 70% load: 262.5 kW Vacuum System Vacuum pumps capacity: 750 m³/h (250 × 3) Tool vacuum tank capacity: 2,000 L Bell vacuum tank capacity: 2,000 L Hydraulic System Required oil quantity: 600 L Hydraulic operating pressure: 10 MPa Maximum hydraulic operating pressure: 18 MPa Pneumatic System Required air pressure: 600 kPa Compressed air consumption: 1,300 N liters/cycle Cooling Water Requirements Incoming water pressure: 200-300 kPa Incoming water temperature: 12-20 °C Outgoing water temperature: 30-35 °C Mechanical Characteristics Lower tool holder force: 9,000 kg Machine weight: 35,000 kg (35 tonnes) Key Utility Requirements Electrical Supply: 375 kW installed load Compressed Air: 600 kPa, 1,300 N liters/cycle Cooling Water: 200-300 kPa at 12-20 °C Hydraulic Oil Capacity: 600 liters Vacuum Capacity: 750 m³/h with two 2,000-liter vacuum tanks Fully automatic thermoforming machine designed to shape plastic sheets suitable for high-capacity industrial applications. Thermoformer details: Forming area 2005mm x 905mm Max forming depth 550mm 3x loading stations. 1 x heating station. (pre-heating, final heating, upper and lower elements) - ceramic/quartz infrared elements Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Scrap collection end station. Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial grade build with multiple access doors, observation windows, and integrated ventilation heat management. Year of manufacture 2007. Ibodpfx Aozumt Dogyoc

Condition: excellent (used), Year of construction: 2008, Arburg 370S 600-70 Year of manufacture: 2008 Injection Unit: Screw diameter: 25 mm Shot weight: 40 g Injection pressure: 1,550 bar Metering volume: 44 cm³ Isdpfoz Iqz Nsx Agyobc Clamping Unit: Clamping force: 60 t Tie bar spacing: 370 x 370 mm Platen size: 510 x 510 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional equipment: - Euromap 67 - Robot interface - 8x air valves - 1x hydraulic core pull - Controller for hot runner (6 zones) - Injection unit: hardened, bimetallic - Integrated sorting flap - Integrated original Arburg side gate picker - Option to set up vertical injection unit using special brackets - Screw diameter can be changed to 22, 25, or 30 mm Dimensions: Weight: 3,160 kg Length/Width/Height: 3.48 x 1.46 x 2.03 m All machines offered are started and tested by our technicians prior to sale. A video of the technical tests for the selected machine can be provided, or live technical tests can be attended at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Year of construction: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Euromap 67 Robot interface Control unit with air valve Hydraulic core pull x 1 Hardened injection unit - bimetal Sprue picker Sepro Industrial Robot 55 Year of construction: 2018 It is possible to purchase a Moretto brand raw material feeding system for an additional charge The set includes: - Screw feeder, volumetric with hopper - Feeder with proportional valve Dimensions: Weight: 3900 kg Length/width/height: 3.80x1.50x2.10 m Ijdpfx Asz Iqn Aegysbc Drive: Pumps/motor: 15 kW Heating output: 8.12 kW Total output: 23.12 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Description: Geiger MiniServo II 1.5, a servo-motorized demolding device or sprue picker, used on an ARBURG 270 S injection molding machine. The device is designed to precisely and quickly remove sprues or small molded parts from the mold and place them aside. Swivel axis (A): 0-105° Demolding stroke (X): 300 mm with linear guide and rack and pinion Vertical/lateral stroke (Y/Z): 800 mm linear guide and rack and pinion (part and gripper weight up to max. 1.5 kg) Servo-motorized drive of the main axes Fail-safe mechanism (Y): electromechanical Sliding console Gripper F Rotary module B (pneumatic) with stop Iodpfx Aozpzhrsgyjbc 1 compressed air circuit for gripper 1 compressed air circuit for rotary module B 1 vacuum circuit with monitoring Gebtkoy Tn Rdsqqtioiu Programming assistant for programming standard demolding sequences with 1 pressure and 1 vacuum circuit Interface connection Euromap 67 (standard) Interface and power cable 5 m Deposition area behind and in front of the machine RAL 9016 white Additional control HT7, vacuum circuit, and consoles Input voltage: 230 V Since I was unable to observe the device in operation, I cannot provide a guarantee. According to maintenance records, it is in good working order, but it stalled once or twice a week. Switching the main switch off and on again would resolve the issue. Therefore, it is not suitable for continuous operation. I am selling it as a spare parts unit.

Condition: used, Year of construction: 2009, weight max. in kg 1000 kg stroke 2750 mm fork length 1200 mm battery 24 / 620 V / Ah Ibjdszip Igepfx Agysc weight of the machine ca. 1,9 t dimensions of the machine ca. 2,9 x 0,82 x 2,52 m Order picker with charger. Battery new in 2022.

Condition: like new (used), Year of construction: 2019, operating hours: 148 h, load capacity: 1,000 kg, lifting height: 3,250 mm, fuel type: electric, mast type: duplex, construction height: 2,190 mm, Manufacturer + model: ACTIL N 10 S - TFY Mast: 2F3250 ID: 23093.0147 Category: Demo Mast: 2F3250 Lowered height: 2019 mm Lifting height: 3250 mm Capacity: 1000 kg Year: 2019 Hours: 148 hours Capacity: 24 V / 775 Ah Ijdpfx Aozv Rvxegysbc Options: DEMO!! 3-in-1!! MINI forklift - Order picker - Counterbalance stacker Fully equipped: - Dual steering - Duplex FFL mast - With cantilever-style adjustable forklift forks - SUITABLE for all types of pallets POWER STEERING

Condition: excellent (used), Year of construction: 2008, Sprue picker ALS AUTOMATIZATION TECHNOLOGY STV 550 CE. Year 2008 Iodpfx Aouu S Dhjgysbc 2x PIECES available

Condition: used, functionality: limited functionality, load capacity: 1,000 kg, lifting height: 7,000 mm, Equipment: cabin, head guard, Offering here is a Linde high-level order picker. The order picker was taken out of operation two years ago due to the purchase of new equipment. The battery is now fully discharged and must be replaced. Apart from the defective battery, the order picker is fully operational. The platform can be removed, allowing for pallet transport as well. Important: The battery is defective and must be overhauled or replaced! A loading ramp is available for loading. The costs for dismantling the mast and preparing the machine for transport are borne by the buyer. Technical specifications: Manufacturer: Linde Model: V10E01 Load capacity: 1000 kg Battery weight: approx. 900 kg Ibodpfx Agoyzdm Djyoc Year of manufacture: 1992 Unladen weight: approx. 3,300 kg Battery voltage: 48V The order picker is being sold due to excess stock.

Condition: excellent (used), Year of construction: 2003, Demag Ergotech - system 250/280-80, clamping force 25 tons, screw diameter 25 mm, year of manufacture 2003, sprue picker included. Isdpfx Aex Em E Rjgyobc

Condition: used, This listing is for a Molecular Devices ClonePix 2 2019 with Compressor Iodpfjxzg I Iex Agyobc The Molecular Devices ClonePix 2 Mammalian Colony Picker is a fully automated system for the selection of high-value clones used in antibody discovery and cell line development. The ClonePix 2 picker enables a picking speed of greater than 10,000 clones per day making it 10 times faster than labor-intensive limiting dilution and FACS. The ClonePix 2 by Molecular Devices features multiple detection methods, integrated plate storage, animal-free media and reagents, sterility maintenance, and discrete colony formation

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 612332V00006, Year of construction: 2019, operating hours: 8,893 h, load capacity: 1,000 kg, lifting height: 4,780 mm, free lift: 1,850 mm, fuel type: electric, mast type: duplex, fork length: 1,190 mm, TECHNICAL DETAILS Lifting height: 4,780 mm Lifting capacity: 1,000 kg Free lift: 1,850 mm Overhead clearance: 2,930 mm Fork length: 1,190 mm Fork width min.: 300 mm Fork width max.: 680 mm MACHINE DETAILS Mast type: Duplex Drive type: Electric Battery type: 4 PzS 620 Battery year of manufacture: 2019 Battery capacity: 620 Ah Battery voltage: 48 V Operating hours: 8,893 h Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,680 x 2,920 mm Unladen weight: 6,225 kg EQUIPMENT Free lift Non-marking tires Semi-cabin Height indicator User manual available CE marking Ibedozulkujpfx Agyjc

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 2 units SSI Schäfer LogiMat-2425 from 2019 for sale. Very sparsely used and in as good as new condition. SSI Schaefer is one of the world's largest companies in warehouse automation and their Vertical Lift Module "LogiMat" has gained a lot of ground in the world in recent years. These 2 lifts come with a good height of 9 950 mm - if you have enough ceiling height in your warehouse or factory, it means the possibility of really compact storage on a small floor surface. If necessary, the machines can be lowered to the desired height. The trays have a width of 2 425 mm and can handle a load of 300 kg, the combination means that the vertical storage lifts also work for businesses with heavy goods. The VLM's come with the option "LogiTilt", a function where the shelf can tilt in the opening of the machine and thus improve the ergonomics for the picker. In addition to the tilt function, the lifts also come with a laser pointer. If the machines are connected to your ERP or WMS, the laser pointer can indicate which picking location goods should be picked from. The machines can be purchased separately or in pairs. Available with a delivery time of 4-6 weeks. Shipping and installation is additional. These vertical lifts are configured with 3 225 mm wide shelves but with slightly shallower shelves than standard, 625 mm, this is often appreciated by warehouse / factory staff for ergonomic reasons. Each shelf provides 2.02 m² of storage space and with 34 shelves per lift, this gives about 68.5 m² of storage space on a floor area of about 10 m² per machine. The Vertical Lift Modules are each equipped with a 17" touch display and without external software, the control panel can be used to manage shelves, handle user management, optimize shelf placement and monitor the weight of each shelf. The lifts can also be connected to a WMS/ERP if necessary. These objects come with the option "LogiGate"; doors in the opening that open/close when the elevator machines pick up/drop off shelves. This option reduces dust and dirt in the machine and lowers the noise level when the lift is running. The items can be purchased separately or in packages of 2 or 3. Available from the end of October 2023. Shipping and installation not included. Manufacturer: SSI Schäfer Manufacturing year :2019 Model: Logimat SLL 3225-625-6950/200 Height: 6 950 mm Width vertical lift module / tray: 3 735 mm / 3 225 mm Iodpfsy D St Rox Agyobc Depth vertical lift module / tray: 2 712 mm / 625 mm Number of trays: 34 trays per unit Maximum weight per tray: 200 kg Electronics: 25 A, 400 V