Used Picker for sale (203)

Condition: good (used), functionality: fully functional, Year of construction: 2021, Manufacturer: Jungheinrich Type: ERE 225 Year of manufacture: 2021 Design: Low-lift order picker Drive type: Electric Load capacity: 2500 kg Bwjdpfszr Ifvsx Abtst Year: 2021 Hours: 7443 Condition: Used Fork length: 2400 mm WITHOUT CHARGER! Price: Net, plus VAT.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 612334X00379, Year of construction: 2020, operating hours: 2,810 h, load capacity: 750 kg, lifting height: 10,610 mm, fuel type: electric, construction height: 4,400 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 1,250 mm, overall weight: 8,330 kg, Equipment: lighting, Attention: The complete equipment list of the vehicle is included as a photo in the images of the ad! Bjdsw U El Topfx Abtjwt STILL Order Picker MX-X 80 – Used unit with premium features, single sale Vehicle Data: - Model: STILL MX-X 80 (Very Narrow Aisle Truck with Pivoting Reach Fork) - Year of manufacture: 2020 | Operating hours: approx. 2,810 h - Load capacity: 800 kg | Lift height: 8,750 mm | Height: 4,400 mm - Additional lift: 1,800 mm | Fork length: 1,250 mm | Aisle width: 2,200 mm - Pivoting reach fork: 180° swiveling, max. 1,400 kg at 600 mm LSA - Adjustable forks: hydraulic, outer width 400 – 1,650 mm Features (Selection): - Mobile personal protection system with 2 laser scanners, fully factory-integrated - Special design pivoting reach fork carriage with reinforced capacity, reach carriage for wide loads up to 2,600 mm - IZF – Inductive Guidance System with guide wire detection, lane detection, automatic aisle recognition & emergency stop on signal loss - Cabin: Combined design for standing/seated order picking, with LED work lights, warning beacon & polycarbonate windshield - Ergonomic driver’s seat (fabric-covered, height & tilt adjustable, suspended), foldable - Control panel: multifunctional, steering knob, 5 programmable favorite keys, contactless two-hand sensor, MMS terminal preparation - Safety: automatic braking, stop & absolute stop at aisle ends, rescue lowering system, RFID-controlled height limit (2 definable heights) - OPTISPEED 3.0: dynamic load display depending on fork height, automatic reach reduction - Additional equipment: Panoramic rear-view mirrors on both sides, DIN A4 writing pad, modular accessory system on cabin railing Battery & Charger: - 80V traction battery (930 Ah), low maintenance, with central water filling system (STILL) - External charger D 80/100 PXS, charging time approx. 9–11 h, 400 V / 32A CEE, LED charge status display Special features: - Extended chassis – ideal for special pallets/corlettes – no disadvantage in racking applications - Machine is currently set up and ready for demonstration - Single unit – not available as a series sale, we bought the truck ourselves 1 year ago but did not set up a warehouse Condition & Removal: - Very well maintained, fully functional, no known defects - Removal only possible by crane (hall height 10 m) – disassembly required and to be organized by the buyer or by arrangement

Condition: used, Year of construction: 2009, weight max. in kg 1000 kg stroke 2750 mm fork length 1200 mm battery 24 / 620 V / Ah weight of the machine ca. 1,9 t Bedpfx Aozip Igebtjwt dimensions of the machine ca. 2,9 x 0,82 x 2,52 m Order picker with charger. Battery new in 2022.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 612332V00006, Year of construction: 2019, operating hours: 8,893 h, load capacity: 1,000 kg, lifting height: 4,780 mm, free lift: 1,850 mm, fuel type: electric, mast type: duplex, fork length: 1,190 mm, TECHNICAL DETAILS Lifting height: 4,780 mm Lifting capacity: 1,000 kg Free lift: 1,850 mm Overhead clearance: 2,930 mm Fork length: 1,190 mm Fork width min.: 300 mm Fork width max.: 680 mm MACHINE DETAILS Mast type: Duplex Drive type: Electric Battery type: 4 PzS 620 Battery year of manufacture: 2019 Battery capacity: 620 Ah Battery voltage: 48 V Operating hours: 8,893 h Dimensions & Weight Dimensions (L x W x H): 3,100 x 1,680 x 2,920 mm Unladen weight: 6,225 kg EQUIPMENT Free lift Non-marking tires Semi-cabin Bwedszulkuspfx Abtet Height indicator User manual available CE marking

Condition: good (used), Year of manufacture 2004 Operating hours 5,526 h incl. battery charger Fork length 1,200 mm Load capacity 1,000 kg Lifting height 6,500 mm Bwedpfx Aboylmbwstst Own weight 2,580 kg Battery weight 700 - 800 kg Battery 48 V additional images available

Condition: used, This listing is for a Molecular Devices ClonePix 2 2019 with Compressor The Molecular Devices ClonePix 2 Mammalian Colony Picker is a fully automated system for the selection of high-value clones used in antibody discovery and cell line development. The ClonePix 2 picker enables a picking speed of greater than 10,000 clones per day making it 10 times faster than labor-intensive limiting dilution and FACS. The ClonePix 2 by Molecular Devices features multiple detection methods, integrated plate storage, animal-free media and reagents, sterility maintenance, and discrete colony formation Bodpjxzg I Iefx Abtswt

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 612332V00005, Year of construction: 2019, operating hours: 8,675 h, load capacity: 1,000 kg, lifting height: 4,780 mm, free lift: 1,850 mm, mast type: duplex, fork length: 1,200 mm, TECHNICAL DETAILS Lifting capacity: 1,000 kg Lift height: 4,780 mm Free lift: 1,850 mm Mast type: Duplex Fork length: 1,200 mm Maximum fork width: 600 mm Overall height: 2,920 mm MACHINE DETAILS Dimensions & weight Dimensions: 3,250 mm x 1,700 mm x 2,920 mm Bwsdsxgdhiopfx Abtet Weight: 6,225 kg Capacity: 620 Ah Battery voltage: 48 V Fuel type: electric Operating hours: 8,675 h

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225P (lift2move) Serial No. 19500S, Year of manufacture 2008 Model No. Rated load capacity 225 kg Lifting stroke 1680 mm Lifting height 2200 mm Bwedpfx Aoflt Edsbtet Lifting speed (unladen / laden) approx. 100 / 75 mm/s Outreach of lifting device 861 mm Chassis length 1020 mm Ground clearance 90 mm Underneath length 600 mm Chassis design (front / rear) Ø 80 / 140 mm (2 fixed / 2 swivel castors) Overall length 1400 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with coiled cable and 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator - 2 units of 12 Volt, 17 Ah lead-acid batteries installed in the battery pack - External charger 24 VDC, 3 Amps (mains voltage 230 V, 50 Hz) - Can be moved manually, swivel castors with three-stage parking brake - Handlebar infinitely adjustable in height - Load receiving flange according to EXPRESSO standard Special version: lifting device from GIESLER for radial fan SC-1000 CP XT (Tiger) - Load capacity of the lifting device 25 kg - Lifting device can be swivelled 90° via manual hydraulic pump - Opening width between the support jaws 300 / 330 mm - Opening width between the clamping rollers 200 - 300 mm - Clamping is done via handwheel - Weight of the lifting device 60 kg Total weight 140 kg very good condition

Condition: new, machine/vehicle number: 25469, Year of construction: 2023, operating hours: 1 h, load capacity: 135 kg, lifting height: 2,850 mm, fuel type: electric, mast type: simplex, construction height: 1,414 mm, .: 25469 Device details: Year of manufacture: 2023 Load capacity: 135 kg Lifting height: 2850 mm Recorded operating hours: 1 h Mast type: Standard Mast height: 1414 mm Length/Width/Height: 1525 / 750 / 1414 mm Operating weight: 630 kg Additional device information: ---- The operating hours stated are generally read from the device. We are happy to offer you suitable transport. A further 250 - 300 forklifts, attachments and sweepers available immediately for you. Of course, also for rent! We are happy to buy your OLD one. If you have any questions? Bedpfx Abotw Dc Njtewt During our business hours from 7:30 am to 4:00 pm you can reach us. We look forward to hearing from you! We speak English Subject to prior sale and errors for this offer. In the dealer business the device is sold in its current condition, not refurbished. All information without guarantee; subject to errors and changes.

Condition: excellent (used), Year of construction: 2005, Arburg 320A 500-170 with the sprue picker / electric machine Year of manufacture: 2005 Injection unit: Screw diameter: 35 mm injection weight: 105 g Injection pressure: 1470 bar Metering volume: 115 ccm Clamping unit : clamping force: 50 t tie bar distance: 320x320 mm Bsdpjzc Nhnofx Abtewt size of clamping platens: 446x446 mm ejector: electric clamping unit: toggle lever Control system: SELOGICA Additional equipment: Electric machine: high speed, energy saving and very quiet. Euromap 67 Robot interface injection unit hardened - bimetal Central lubrication Machine with the built-in conveyor belt Arburg and original sorting flap Dimensions: Weight: 3500 kg Length/width/height: 3.41x1.43x1.99 m Drive: Pumps/motor: 10.2 kW Heating power: 5,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: used, Year of construction: 2010, Injection moulding machine Arburg 370H 600-290, year 2010, incl. Wittmann picker Bjdpfx Aboy R Tg Eetewt Injection moulding machine Arburg 470C 1500-400, year 2006, incl. Wittmann handling

Condition: used, Electric stacker – pedestrian stacker, tow stacker for ergonomic handling of small loads EXPRESSO Type Lift & Drive 125 (lift2move) Serial No. 194679 Year of manufacture 2015 Type No. 1418242111 Rated load capacity 125 kg Lifting height 1450 mm Total lifting height 1785 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Outreach of lifting support 530 mm Chassis length 890 mm Ground clearance 90 mm Underrun length 490 mm Chassis design (front / rear) Ø 60 / 100 mm (2 swivel casters / 2 swivel casters) Overall length 890 mm Overall width 545 mm Overall height 1930 mm Motor power 250 W Battery capacity 24 V / 7.2 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and 2 lifting speeds - Battery pack with quick-change system - Battery charge level indicator - 2 pcs lead-acid battery 12 Volt, 7.2 Ah installed in the battery pack - External charger 24 VDC, 2.5 Amperes (mains voltage 230 V, 50 Hz) - Manually steerable, swivel casters with three-stage parking brake - Handle continuously adjustable in height - Load receiver U-profile for square profile according to EXPRESSO standard 210 x 45 mm / internal dimension 30 mm / 4 mounting holes M8 at a distance of 50-60-50 mm Bjdpfx Asflt Ebobtswt Mounted lifting support: Special design from GIESLER LAM-DC power rail Load capacity of lifting support 40 kg Weight of lifting support 24 kg Support rail laterally adjustable by +-90 mm via linear guides (3 locking points left, center, right) Support rail swiveling +-38° (infinitely adjustable and lockable) Support rail with 2 clamping jaws Distance between the clamping jaws 550 mm Material clamping thickness 100 mm Dimensions of material support W x D 650 x 155 mm Total weight 75 kg very good condition

Condition: excellent (used), Year of construction: 2002, Arburg 420C 1300-675 with the sprue picker Star Year of manufacture: 2002 injection unit: Screw diameter: 50 mm injection weight: 297 g Injection pressure: 2080 bar Metering volume: 353 ccm Clamping unit: clamping force: 130 t tie bar distance: 420x420 mm size of clamping platens: 605x605 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 2 Hydraulic core pull x 2 Injection unit hardened - bimetal Type of injection unit: Vario - this offers the possibility to use the injection unit e.g. for lateral spraying Covers from the operator side open automatically Dimensions: Weight: 4330 kg Length/width/height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating power: 14,9 kW Total power: 44,9 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Bedpfxezc N H Rs Abtswt Price: Upon request

Condition: used, Electric pallet stacker - pedestrian stacker, drawbar stacker for the ergonomic handling of small loads Manufacturer EXPRESSO, Model Lift & Drive 225 (lift2move) Bedpfx Aoflt Egjbtjwt Serial No. 19153-HD, Year of manufacture 2010 Type No. Rated load capacity 225 kg Lifting stroke 1770 mm Lifting height 2350 mm Lifting speed (unloaded / loaded) approx. 100 / 75 mm/s Outreach of lifting arm 400 mm Chassis length 1130 mm Ground clearance 90 mm Underrun length 600 mm Chassis design (front / rear) Ø 80 / 150 mm (2 fixed / 2 swivel casters) Overall length 1130 mm Overall width 600 mm Overall height 2450 mm Motor power 400 W Battery capacity 24 V / 16 Ah - Electric lifting drive with motor brake / self-locking gearbox and precision spindle with safety slip clutch - Cable remote control with spiral cable and buttons for 2 lifting speeds - Battery pack with quick-change system - Battery charge indicator - 2 lead-acid batteries 12 Volt, 17 Ah installed in the battery pack, battery NEW - External charger 24 VDC, 3 Amperes (mains voltage 230 V, 50 Hz) - Manually movable, swivel casters with three-stage parking brake - Handlebar infinitely adjustable in height - Load receiving flange according to EXPRESSO standard 380 x 50 mm / 4 mounting holes M10 at a distance of 100-120-100 mm Mounted lifting attachment: Quadruple lifting fork, Expresso type, load capacity of the lifting attachment 40 kg - Lifting attachment can be swivelled by 90° by hand (can only be locked in the 0° position) - Lifting attachment can be moved laterally by +-100 mm on linear guide (locking only in the center) - Width between the support arms 320 mm - Height between the support arms (height can be locked at) 365 / 400 / 450 mm (max. opening width without locking hole 510 mm) - Depth between the support arms 150 mm to the stop bolt / 300 mm maximum Total weight 100 kg Good condition

Condition: used, Wide-track high-lift truck, pedestrian stacker, drawbar stacker HANSELIFTER - Hanse-Lifter, Model E-SDJ1016-01 Wide-track lift truck Standard model. Year of manufacture: 2014 Rated load capacity, drawbar stacker: 1000 kg Load capacity, special attachment GIESLER: 200 kg Rated lifting height: 1600 mm Fork length: 530 / 770 mm Fork carriage width: 950 mm Ground clearance under wheel arms: 130 mm Operating voltage, hydraulic unit: 12 volts Overall height: 2160 mm Overall length: 1650 mm Overall width: 1860 / 1200 mm - Manual drive operation - Electro-hydraulic lifting mechanism - Adjustable track width from 950 to 1650 mm (width between wheel arms) - 1 piece, 12-volt battery - Separate charger, 12 volts, 15 amps - Fork base carrier on lifting frame made of steel - Fork carriage, special attachment GIESLER, load capacity 200 kg Bwodpfxshxvuws Abtot - Fork carriage made of aluminum plate with precision guide, lateral adjustment via clamping lever - Fork tines made of stainless steel, total length 770 mm to pivot plate - Fork tines cannot be lowered to the ground due to the special attachment (approx. 170 to 250 mm depending on track width) Self-weight: 485 kg Like new condition

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 2 units SSI Schäfer LogiMat-2425 from 2019 for sale. Very sparsely used and in as good as new condition. SSI Schaefer is one of the world's largest companies in warehouse automation and their Vertical Lift Module "LogiMat" has gained a lot of ground in the world in recent years. These 2 lifts come with a good height of 9 950 mm - if you have enough ceiling height in your warehouse or factory, it means the possibility of really compact storage on a small floor surface. If necessary, the machines can be lowered to the desired height. The trays have a width of 2 425 mm and can handle a load of 300 kg, the combination means that the vertical storage lifts also work for businesses with heavy goods. The VLM's come with the option "LogiTilt", a function where the shelf can tilt in the opening of the machine and thus improve the ergonomics for the picker. In addition to the tilt function, the lifts also come with a laser pointer. If the machines are connected to your ERP or WMS, the laser pointer can indicate which picking location goods should be picked from. The machines can be purchased separately or in pairs. Available with a delivery time of 4-6 weeks. Shipping and installation is additional. These vertical lifts are configured with 3 225 mm wide shelves but with slightly shallower shelves than standard, 625 mm, this is often appreciated by warehouse / factory staff for ergonomic reasons. Each shelf provides 2.02 m² of storage space and with 34 shelves per lift, this gives about 68.5 m² of storage space on a floor area of about 10 m² per machine. The Vertical Lift Modules are each equipped with a 17" touch display and without external software, the control panel can be used to manage shelves, handle user management, optimize shelf placement and monitor the weight of each shelf. The lifts can also be connected to a WMS/ERP if necessary. These objects come with the option "LogiGate"; doors in the opening that open/close when the elevator machines pick up/drop off shelves. This option reduces dust and dirt in the machine and lowers the noise level when the lift is running. The items can be purchased separately or in packages of 2 or 3. Available from the end of October 2023. Shipping and installation not included. Manufacturer: SSI Schäfer Manufacturing year :2019 Model: Logimat SLL 3225-625-6950/200 Height: 6 950 mm Width vertical lift module / tray: 3 735 mm / 3 225 mm Depth vertical lift module / tray: 2 712 mm / 625 mm Number of trays: 34 trays per unit Bsdpfx Abey D St Rstowt Maximum weight per tray: 200 kg Electronics: 25 A, 400 V

Condition: used, Year of construction: 2007, used to produce innerliners Equipment Specifications Summary Forming and Tool Dimensions Maximum frame inner size: 2005 × 905 mm Maximum tool base size: 2000 × 900 mm Minimum tool base size: 700 × 500 mm Maximum sheet size: 2090 × 960 mm Minimum sheet size: 790 × 560 mm Maximum tool height: 800 mm (550 + 250 mm) Maximum formed workpiece height: 550 mm Maximum sheet stack height: 1000 mm Maximum pallet height: 180 mm Heating System Upper heating power: 83.3 kW Lower heating power: 71.3 kW Upper preheating power: 52 kW Lower preheating power: 46.8 kW Drive Motors & Auxiliary Equipment Oil pump motor power: 19 kW Vacuum pump motor power: 23.4 kW Sheet centering motors power: 0.24 kW Sheet feed motor power: 2.2 kW Sheet feed width-adjustment motor power: 2.2 kW Sheet picker motor power: 0.37 kW Fan motor power: 5.5 kW Shear motor power: 2.2 kW Carriage motor power: 2.2 kW Bodpezumt Dsfx Abtewt Rotary table motor power: 1.1 kW Scrap cutter motor power: 3.0 kW Scrap conveyor motor power: 0.37 kW Finished workpiece discharge belt motor power: 0.75 kW Cross-cutting motor power: 0.25 kW Cross-cut scrap conveyor motor power: 0.22 kW Transfer unit motor power: 1.5 kW Auxiliary units maximum consumption: 5.1 kW Tempering unit power: 52 kW Electrical Requirements Maximum installed power: 375 kW Power consumption at 70% load: 262.5 kW Vacuum System Vacuum pumps capacity: 750 m³/h (250 × 3) Tool vacuum tank capacity: 2,000 L Bell vacuum tank capacity: 2,000 L Hydraulic System Required oil quantity: 600 L Hydraulic operating pressure: 10 MPa Maximum hydraulic operating pressure: 18 MPa Pneumatic System Required air pressure: 600 kPa Compressed air consumption: 1,300 N liters/cycle Cooling Water Requirements Incoming water pressure: 200-300 kPa Incoming water temperature: 12-20 °C Outgoing water temperature: 30-35 °C Mechanical Characteristics Lower tool holder force: 9,000 kg Machine weight: 35,000 kg (35 tonnes) Key Utility Requirements Electrical Supply: 375 kW installed load Compressed Air: 600 kPa, 1,300 N liters/cycle Cooling Water: 200-300 kPa at 12-20 °C Hydraulic Oil Capacity: 600 liters Vacuum Capacity: 750 m³/h with two 2,000-liter vacuum tanks Fully automatic thermoforming machine designed to shape plastic sheets suitable for high-capacity industrial applications. Thermoformer details: Forming area 2005mm x 905mm Max forming depth 550mm 3x loading stations. 1 x heating station. (pre-heating, final heating, upper and lower elements) - ceramic/quartz infrared elements Pressure and vacuum forming operation. 4 x side trimming presses. (rotary) Guillotine. Scrap collection end station. Automation: Fully automatic batch processing with operator control panel featuring manual/automatic modes. Industrial grade build with multiple access doors, observation windows, and integrated ventilation heat management. Year of manufacture 2007.

Condition: new, machine/vehicle number: 26654, Year of construction: 2026, operating hours: 1 h, load capacity: 1,000 kg, lifting height: 715 mm, mast type: simplex, construction height: 1,244 mm, .: 26654 Device details: Year of manufacture: 2026 Load capacity: 1000 kg Lifting height: 715 mm Recorded operating hours: 1 h Mast type: Standard Mast height: 915 mm Length/Width/Height: 1655 / 540 / 1244 mm Operating weight: 143 kg Additional device information: ---- The operating hours are generally recorded hours. We would be happy to offer you the appropriate transport. We have another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We would be happy to buy your OLD one. Do you have any questions? During our business hours from 7:30 a.m. to 4:00 p.m., you can reach us. We look forward to hearing from you! We speak English. Bjdozik Hkjpfx Abtjwt Intermediate sale and errors for this offer are expressly reserved. In the dealer business, the device is sold in its current condition, without refurbishment. All information without guarantee, errors and changes excepted.

Condition: excellent (used), Electric Order Picker Bedpfx Ajv R En Aobtewt Capacity 1200 kg Lifting height 6725 mm Fork length 800 mm Battery Battery charger Available for testing

Condition: excellent (used), Year of construction: 2003, Demag Ergotech - system 250/280-80, clamping force 25 tons, screw diameter 25 mm, year of manufacture 2003, sprue picker included. Bsdpfx Abjx Em E Rotswt

Condition: excellent (used), Year of construction: 1999, ARBURG 420C 800-250 with the sprue picker anvil+long leg Year of manufacture: 1999 Bwedpfx Abozc Np Estst injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit: clamping force: 80 t tie bar distance: 420x420 mm size of clamping platens: 570x570 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core pull control Injection unit hardened - bimetal Dimensions: Weight: 3180 kg length/width/height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating power: 6,5 kW Total power: 21,5 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, Sprue picker Engel Type: ER-USP 5 Year of manufacture: 2011 Bodpoxrv Uxsfx Abtowt

Condition: excellent (used), Year of construction: 2005, Krauss Maffei KM 80-180 CX with the Sepro Industrial Robot 55 sprue picker Bwodpfjzc Ngdex Abtjt Year of construction: 2005 Injection unit: Screw diameter: 30 mm Injection weight: 77.4 g Injection pressure: 2025 bar Dosing volume: 85 ccm Clamping unit: Clamping force: 80 t Distance between tie bars: 420x420 mm Size of the clamping plates: 670x670 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC V - touch screen Additional equipment: Euromap 67 Robot interface Control unit with air valve Hydraulic core pull x 1 Hardened injection unit - bimetal Sprue picker Sepro Industrial Robot 55 Year of construction: 2018 It is possible to purchase a Moretto brand raw material feeding system for an additional charge The set includes: - Screw feeder, volumetric with hopper - Feeder with proportional valve Dimensions: Weight: 3900 kg Length/width/height: 3.80x1.50x2.10 m Drive: Pumps/motor: 15 kW Heating output: 8.12 kW Total output: 23.12 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 1998, operating hours: 94,737 h, clamping force: 2,000 kN, screw diameter: 60 mm, injection pressure: 1,440 bar, injection weight: 427 g, Arburg 470C-2000-675 (Nr. 40) without picker Year of production: 1998 Bsdpfxjvt Tb Ao Abtowt TECHNICAL DATA Screw Dia [mm]: 60 Shot Weight [g]: 427 Injection Pressure [bar]: 1440 Clamping Force [kN]: 2000 Tie Bar Distance [mm]: 470x470 Platen Size [mm]: 715x715 Mould Height min. [mm]: 250 CONTROL Type of Controls: Selogica Monitor: Yes Control Cabinet: Yes Language: Polish, German OTHER Power [kW]: 45,8 Workinghours [h]: 94737 Weight [kg]: 6630 EUROMAP

Condition: excellent (used), Year of construction: 2011, Sprue picker Engel Type: ER-USP 5 Year of manufacture: 2011 Bedpfx Aboxq Tkhetjwt