Used Plasma Cutting Drilling for sale (18,502)

Year of construction: 2013, condition: good (used),  Plasma cutting and extraction table, dimensions 2.500 x 6.000 mm.  Gantry bridge.  Carriage with servo-drives (to position the gantry bridge in X-direction).  Machine track, length 8 m.  HEB450 profiles for the foundation of the machine track, 8 m.  Plasma cutting unit Hypertherm HPR 400XD, 1 pcs.  Plasma bevel cutting unit, including automatic height control system.  Fume extraction unit Filtercube 4H for plasma cutting unit.  Oxy-fuel cutting torch, 3 pcs.  Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 pcs.  Torch suspension for oxy-fuel torch (motor driven).  Torch suspension Single Drive for oxy-fuel torch, 2 pcs (automatic torch positioning). Lredpfx Adotp Dhpewjg  Laser pointer (to align and position the torch).  Computer control system (consisting of an industrial PC and a control panel).  Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support).  Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel costs and board and lodging) and 1 day online-support).  Emergency stop with stop cord.  Year of build: 2013.

Condition: good (used), Year of construction: 2017, V304 plate processing machine (including 1 gantry beam(s) of 6.500mm and side trucks) ◼ This V304 plate processing machine is capable of processing plates up to 3.050mm x 18.000mm for bevel plasma cutting and marking (needle marker, if attached) and 4.100 x 18.000 mm for oxy-fuel cutting and marking (needle marker, if attached) ◼ X-rail (21.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ◼ Plasma cutting and extraction table (4.300mm x 18.720mm, 2 channel(s), 1 pcs, suitable for ≥ 350A cutting) ◼ Position 1: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Driven suspension (1 pcs, servo motor driven, including laser pointer) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 2: Plasma cutting unit Kjellberg SmartFocus400 (1 pcs, automatic gas console, complete with cutting parameter database) ◼ Plasma 3D bevel unit (1 pcs, including 5 NC-axis, Voortman height control, intelligent torch positioning Lredsvpalajpfx Adwsg system and 3D collision sensor, for x- ,y- , k- and v-weld preparations) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Dross inhibitor (1 pcs, including 1,2L reservoir) ◼ Arc Glare protection (1 pcs) ◼ Position 3: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 4: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Position 5: Oxy-fuel cutting torch 4.0 (1 pcs, automatic gas console, ignition and piercing, complete with cutting parameter database) ◼ Voortman height control (1 pcs, capacitive height control) ◼ Dragged suspension (1 pcs, with automatic addressing) ◼ Cables high instead of low ◼ Donaldson fume extraction unit DFO 4-48 - 200L (incl. frequency controller) ◼ Air conditioning for switch panel (up to an ambient air temperature of 55°C) ◼ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module, online support) ◼ Post processor for SigmaNEST (SigmaNEST is provided by the customer) ◼ Safety devices (safety bumpers, emergency stop cord)

Condition: as good as new (ex-display), Year of construction: 2024, Geka plasma cutting machine GCS P-3015 table size 3000 x 1500mm incl. plasma source Hypertherm 105A incl. Hypertherm nesting software - GEKA CNC cutting table - Hypertherm Powermax - Cutting capacity: steel 22mm, stainless steel 20mm, aluminum 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for more support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag protects cables from damage - Movement speed 40 meters/min. - Resolution 0.01 mm. - Optional automatic lubrication in all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. Lredpfxoxyyxdj Adweg - Torch anti-collision system (machine stops before any collision) - Laser pointer to check the X and Y axes for zero reference. - The effective cutting area for P-3015 is 3000 x 1500mm. - Gantry height Z = 100 mm.

Condition: good (used), Year of construction: 2012, Worktable: 3,000 x 1,500 mm Table height: 700 mm Load capacity: Max. 600 N/m² Material thickness: 0.5 – 6 mm Speed: Max. 36 m/min Control unit: Flat display, keyboard and mouse Power supply: 3x 400V, 50Hz + 1x 220V, 50Hz (approx. 10 kW) Pneumatics: 6.0 – 8.5 bar (approx. 300 l/min) Dimensions: 4,100 x 2,200 x 1,700 mm Weight: 1,400 kg Lodpfexugqvjx Adworg The extraction unit is not included in the price. However, upon request, we can provide a suitable extraction system for the machine.

Year of construction: 1997, condition: excellent (used), I sell the drilling machine with cutting saws COMEC FM0V8 2000, Year 1997. Working width up to 2000mm Configuration: 0 motors from under 1+1 motors from sides / angular adjustable 2 motors from back / heads angular adjustable 2 motors from top / heads angular adjustable 4 pcs. material pressure from top 2 pcs. cutting saw aggregates / heads angular adjustable Atypic 5-spindle drilling heads included 3 x 15mm / 2 x 25mm. Drilling heads in price. Lrodpfx Adoh H S Hwowog Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2005, I sell the throughfeed drilling machine with cutting saws and milling heads Rilesa Flex Configuration: 1+1 precise cutting saws from sides Lrodpfx Ajvylwcedwjg 1+1 drilling head motors from sides 1+1 milling heads from sides 4 pcs. drilling head motors from top 3 pcs. drilling head motors from back Entry feeding magazine for elements. Backfeeding system of conveyors to return the elements to the operator. Very good condition. Available immediately.

Condition: good (used), Year of construction: 1990, I sell the combined tenonging machine with drilling head BALESTRINI I2F 1 tilting table with pneumatic material pressure. Automatic cutting saw from bottom. Tenoning milling head able to do the finger-joint as well. Ledpfohw Dfnox Adwjrg Drilling head for dowel holes production 3 spindles. Revolving 360° enabling any position. Feeding automatic. Positioning on end-sensors. Available immediately.

Year of construction: 1980, condition: good (used), Device number: 2 002 Ljdehk El Topfx Adwerg Welding current at 100 % ED: 80 Amp Connection: 18 kVA Cooling type: forced cooling Equipment: hose package for connection; burning device; mobile Dimensions: 1.000 x 700 x 1.000 mm Weight: 0,3 t

Condition: used, Year of construction: 2023, functionality: fully functional, type of input current: three-phase, overall weight: 540 kg, input voltage: 380 V, total width: 5,950 mm, total length: 23,841 mm, The Ajan CNC Plasma – Oxy Cutting Automatic Machine we offer for sale is a 2023 model and provides high precision and efficiency in industrial cutting operations. It will speed up your production processes with its wide cutting area, powerful engine and durable structure. ✅ Brand: Ajan CNC ✅ Model: 3000 X 15000 mm ✅ Serial Number: PP23030 AUTOMATIC Lredpfjv Hciijx Adwjg ✅ Year of Production: 2023 ✅ Power: 4 kW ✅ Input Voltage: AC 380V / 3 Phase / 50 Hz ✅ Maximum Current: 6 AMP ✅ Weight: 540 K

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,300 mm, total length: 4,215 mm, table height: 1,000 mm, working width: 1,500 mm, Equipment: documentation/manual, MetalMaster 2.0 CNC-controlled flatbed dry plasma cutting machine for oxy-fuel and plasma cutting of individual metal sheets. The positive-fit double-sided longitudinal drives and precisely machined guide rails offer you: - High positioning and working speeds - Maximum positioning speed: 35,000 mm/min - Working speed: 5,000 mm/min - High cutting accuracy and contour fidelity - Accuracies according to DIN EN 28206 - Supply voltage: 400 V 50 Hz, TN-S system (3/PE/N) - Color scheme: main components in RAL 5002 blue Ledpfxexyhnao Adwsrg - Ambient temperature: +5 °C to +45 °C - Relative humidity: max. 90%, non-condensing Integrated extraction table - Table height: 1000 mm - Maximum table load: 800 kg/m2 Machine - Maximum sheet format: 1500x3000 mm - Overall width: 2300 mm - Overall length: 4215 mm For further information, please see the pictures!

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 115331, working range: 6,000 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, overall weight: 4,000 kg, input voltage: 400 V, cutting height (max.): 200 mm, workpiece weight (max.): 3,800 kg, table length: 6,000 mm, table width: 2,000 mm, cutting current: 280 A, Plasma cutting machine with extraction, dimensions 6000 x 2000mm Voortman VACAM VCS Thermo Ljdpfevld D Sjx Adworg Plasma cutting system Kjellberg HiFocus 280i Plasma gas control unit FlowControl 3 Cooling unit KWE 360 Cutting current 10 - 280A Smoke extraction system Teka Filtercube 4 H Year of manufacture 06/2013 Filter inserts 4 integrated blower Motor power 7.5KW

Condition: ready for operation (used), MGM Omnicut 3100 – CNC cutting machine for plasma and oxy-fuel cutting High-quality CNC cutting machine, ideal for high-precision plasma and oxy-fuel cutting of structural steel, stainless steel, and non-ferrous metals. Ljdpfexk Trrox Adwerg — Technical Specifications • Machine type: CNC cutting machine • Model: Omnicut 3100 • Working area: 2,000 × 4,000 mm • Required floor space: 6,500 × 3,500 mm • Maximum positioning speed: up to 20 m/min • Positional accuracy: high precision in cutting and positioning • Programming software: SAPSproW standard version, with optional upgrade for bevel or drilling technologies Axes & Drives: • X-axis: robust H-beam design with precisely ground rack and pinion • Dual-sided drive on the X-axis for maximum stability and durability • Y-axis: maintenance-free linear guides, suitable for both light and heavy equipment • AC servo drives controlled via frequency converters, maintenance-free Cutting Technologies: • Oxy-fuel: Electric torch carriage with capacitive height control system • Plasma: Electric torch carriage with programmable height control system • Supports additional technologies such as bevel torches and drilling units — The machine is in excellent condition and ready for immediate use. • Inspection at any time • Loading and transportation can be organized without difficulty — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are plus VAT. Subject to prior sale and errors.

Condition: good (used), functionality: fully functional, Baykal BPS_Hypertherm HPR260 Baykal BPS is the model that provides top level sensitivity amongst all series. It is designed for high sensitivity plasma cutting. Plasma cutting system Baykal: Benefits: - High mechanical accuracy to: ± O.1 mm - Axis positioning speed: 30 m/min - X and Yaxis travel on precision linear rail guides. Technical data: - Independent CNC console - Tube(pipe) cutting place - Bevel cutting head - Hypertherm HPR260 - Independently Constructed Table Plot dimensions: 2000mm x 9000mm (without the pipe cutting place) 2900mm x 9000mm (with the pipe cutting place) PLASMA SOURCE: Hypertherm HPR260 Specification: - Maximum cutting tickness: up to 65mm - Bevel cutting: up to 45 degrees Lrsdpfxjruq Azo Adweg - Output voltage: 175 VDC - Output current: 260 A - Maximum OCV: 311 VDC - Dimensions: 115 cm (45.1") H, 82 cm (32.1") W, 119 cm (46.7") L

Year of construction: 2024, condition: new, Plasma sheet cutting, combined with drilling and tapping Heavy-duty gantry type cutting system combined for drilling, plasma and oxy-fuel cutting applications. Double-side drive, precise positioning system with rack and pinion on 3 linear axes and zero-backlash on the torch rotational axes. Reinforced construction of the gantry and drives to handle the heavy load during drilling applications. Low backlash, precision gears, as well as highly rigid and precise rail guiding system enable the smooth motion and excellent cut quality in corners and small holes. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 500 mm KEY FEATURES: ▪ Fully automated technology for program creation and execution ▪ Program based on 2D part drawing ▪ Drill / tap operations assigned to single or multiple holes with the same diameter ▪ Automatic part nesting and rapid moves between holes and parts with different strategies ▪ Automatic tool change, fully programmable, no operator intervention needed ▪ Single program zero position for the complete drill and plasma cut processing in a single program. Just as normal sheet cutting process, no special settings or procedure required from the operator ▪ Automatic measurement of distance from the drill tip to the material. No measurement by operator needed ▪ Automatic tool cooling on-off control ▪ Chip -breaking drill head motion control with programmable parameters ▪ Automatic program head control ▪ Drill head moves to safe position automatically after drilling is done ▪ Plasma head automatically moves to start of cut position, searches the plate and starts cutting ▪ Plasma head moves automatically to safe position after plasma cutting is done Lodpfsh I Eitjx Adworg ▲ DRILL HEAD up to 29kW max. drill tool diameter 40mm ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Year of construction: 2024, condition: new, Robotic gantry system for metal sheet and profile cutting 3D robotic gantry system for plasma and oxy-fuel cutting has double-side drive, precise positioning system by racks and pinions on the 3 linear axes with exceptional speed and dynamics. Zero-backlash on the 3 rotational axes allow 4-side machine processing of profiles and round tubes. Precise gearboxes with minimum backlash, dynamical engagement of the motors to the racks, and rigid guide system allows smooth movement, excellent cut quality of corners and small holes. The gantry system has a cantilevered part crossbeam, which allows profile cutting in a cabin especially designed for this purpose. Lodpfx Ajh I Nw Dedworg Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 1500 mm Beams and profiles types: T, L, H, U, rectangular tube, round tube Maximum dimensions of beams: Width up to 1200mm Rectangular tubes: Cross-section up to 600x600mm KEY FEATURES ▪ Stable metal construction with precise linear guides and servo-drives with racks and pinions on all axes; ▪ High dynamics, on all X, Y and Z axes: up to 30 m / min speed and acceleration up to 3 m / s²; ▪ 3D control on seven axes allows for a higher level of CNC programming; ▪ Maximum use of machine resources, thanks to the concept of combined processing of sheets and profiles - the ability to 100% load the machine when switching between sheets and profiles, without downtime for loading sheets and profiles and unloading cut parts ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Year of construction: 2007, condition: ready for operation (used), A Kjellberg plasma cutting system is available. Plasma source: Kjellberg HiFocus 160i, max. material thickness: 40mm, track width: approx. 3100mm, gantry dimensions X/Y: 2000mm/2000mm, runway height: 500mm, working dimensions X/Y: 2000mm/12000mm. The machine was expanded with inkjet in the year 2015. Including suction and filter. The control was renewed in the year 2021. Documentation available. An inspection on site is possible. Lsdpfx Adoxwn Inowjrg

Condition: new, Year of construction: 2025, - Thread cutting device - Control panel with OLED display - LED lighting - Quickly adjustable and ergonomic drilling depth stop Ljdpofx U D Aofx Adwerg - Continuously variable speed control via central rotary knob - Thermal overload protection - Spindle stop - Drilling protection with electric. Protection - Connection cable with Schuko plug TECHNICAL DATA - Spindle: B16 - Drilling depth: 60 mm - Projection: 220 mm - Column diameter: 70 mm - Spindle/work surface: 140 – 315 mm - Drill head height adjustment: by hand - Speed display: digital - Drilling depth display: digital - Feed (mm/revolution): by hand - Spindle speeds continuously variable: 60 – 6,000 rpm - Continuous/normal drilling capacity: 10/12 mm - Thread cutting capacity (depending on pitch): M6 - FACTORY WARRANTY: 3 years (single shift) - OPTION drilling package 1 (No. 296570) Machine vice Flott [felix] 2.0 80 and keyless drill chuck 1-13 mm (accuracy 0.17 mm) Price: € 275,- - FREE DELIVERY (Germany only) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: new, Year of construction: 2022, AVAILABLE FROM STOCK : Geka plasma cutting machine GCS P-4020 table size 4000 x 2000mm incl. plasma source Hypertherm 125A incl. PRONEST HYPETHERM NESTING SOFTWARE - GEKA CNC cutting table - Hypertherm Powermax 125A - cutting capacity: steel 25mm, stainless steel 20mm, aluminium 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for increased support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. - Fully enclosed cable drag to protect cables from damage. - Movement speed 40 meters/min. - Resolution 0.01mm. Lsdpfx Aogypcljdwerg - Optional automatic lubrication on all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision). - Laser pointer to check X and Y axes for zero reference. - The effective cutting area for P-4020 is 4000 x 2000mm. - Portal height Z = 100 mm. - Table with compartements for aspiration

Condition: used, Year of construction: 1985, machine/vehicle number: 5801, Plate drilling and burning machine FDB 600, The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm Lsdpfx Ajibq Itsdwjrg sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Condition: used, Year of construction: 2017, functionality: fully functional, controller manufacturer: ECS, controller model: SERIE 900, control type: NC control, TABLE DIMENSIONS: 2500 mm x 1250 mm Lredpfx Aexc Ibrodwjg C.N. E.C.S. series 900 GENERATOR: CEBORA PLASMA PROF166

Condition: used, Plasma cutting unit Harris Type Plasma Cutting H 35 A Machine No. Year of manufacture approx. 1994 Output 35 Amp. Lrodpfoxciumox Adwjg Cutting capacity approx. 4 mm Torch package length approx. 7 meters Compressed air connection approx. 6 bar - with pressure reducer Power supply 380 Volt, 50 Hz Space requirement (L x W x H): 550 x 400 x 960 mm Weight approx. 50 kg Good condition

Condition: new, Year of construction: 2024, PLASMA BURNER MODEL MTX 1500/3000 Construction: steel+aluminum Overall dimensions: 3350/2200/1300 Working area: 3100/1520/140 XY axis drive double-sided gate drive: 4Nm stepper motors with gears, gear rails class accuracy 8 Z axis drive: stepper motor ball screw Travel speed: up to 25m/min Z axis control system: THC My plasm system Collision system to protect the torch from damage Linear guides: TBI Automatic material detection system Power supply: 240V Permissible load: 1700kg Total weight: 1200kg net INCLUDED: - control panel -water table -replaceable grate -control software in German, English, Polish -Declaration of Conformity CE - DTR Lrjdpfxerb Dyzs Adwjg It is possible to select the appropriate Hypertherm cutter to meet individual customer needs.

Condition: used, Bach oxy-fuel and plasma cutting system Lrsdpfsxudu Eex Adweg

Year of construction: 1985, condition: used, machine/vehicle number: 60802 A 17983 J, cutting circuit: bis 400 A Lrodpfx As Sdrfedweg space needed: 820 x 1220 x 930 mm weight: 750 kg

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, total width: 4,780 mm, total length: 8,200 mm, table length: 6,400 mm, table width: 2,167 mm, travel distance X-axis: 2,000 mm, travel distance Y-axis: 6,000 mm, space requirement width: 6,380 mm, Number of cutting heads: 1 Number of drilling heads: 1 Table length: L [m] 6 Table width: WT [m] 2 Channel width: WCH [m] 0.8 Cutting machine with cutting table and sectional extraction: 1 USB flash drive (USB 2.0): 1 Basic tool station type R (A, B-axis for MG): 1 Remote diagnostics: 1 AsperWin – Basic module: 1 AsperWin – Nesting module: 1 AsperWin – Bevel cutting module: 1 AsperWin – Pipe cutting module: 1 AsperWin – Bevel cutting module (SolidSel): 1 Remote control for filter unit: 1 Connection of the filter unit to the power distribution unit: 1 Power distribution unit for the system: 1 Integration of the plasma source into the CNC system HPR, HD, HT, HF FF: 1 MG-22 drilling head, max. drill bit 22 mm, max. tap bit 16 mm, 5.5 kW, Y- and Z-axis 1 Cooling system – ecological cooling system for the drill bit 1 ISO 40 6-tool clamping magazine for automatic tool change linear PMB6 1 RSV 100-500 HHP pipe cutting device 1 880 mm grating for duct cover, 1 m long 6 RSV 100-500 HHP support rollers on rails 2 1 m rails for support rollers with 2 rails 7 Lredpfxjwhk E Hs Adwjg Chuck for square pipes up to 500 mm in diameter, 4 jaws 1 Signal light 1 DFPRO 8; ART501/9 kW; 6000 m3/h [15-3x3.5-2 m - 1x] [15x1.5 m - 2x] 1 HPR260 Automatic 1