Used Plasma for sale (492)

Year of construction: 2007, condition: used, Pulsed plasma nitriding system, manufacturer PLATEG Plasma Technik Grün, type PulsPlasma PP 800, 2000 x 2900, mono with tandem preparation, system no. A 5811, with 1 plasma generator, type PP 800/160, no. AN 7491, year of manufacture 2006/2007, 600 V output voltage, 800 A pulse current, 480 kVA pulsed power, 190 kW connected load, process control type Stange 510, stainless steel vacuum chamber Ø 2000 mm (usable volume 1800 mm), height 2900 mm (usable height 2200 mm), wall thickness 10 mm, batch weight 7,500 kg, process temperature max. 600°C, vacuum pump by Leybold, 13 kW, 2,000 m³/h, DN 160, with pressure sensor and manometer, gas supply, cooling water supply with internal recirculator, overall dimensions: 7,840 mm x 3,470 mm x approx. 7,400 mm height, with control cabinet including 2 cooling units. Bodpfx Afoyazhzjhscu

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature Control Unit plasma plasTemp Primus 90 Stock No.: 503642 Machine/Device Type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of Manufacture: 2018 Technical Data for plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50: - Circulation medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW - via two stainless steel tubular heaters - made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference of 80 K between tool inlet and cooling water; minimum pressure difference in cooling water circuit: 3 bar - Pump: Bronze submersible pump, Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Microprocessor controller, self-optimizing SBC - with digital display of setpoint and actual values for supply temperature • Maximum temperature monitoring • Automatic filling system with level monitoring • Output socket for collective fault signal • Acoustic alarm buzzer for alerts • Operating hours counter • Heating control via Solid State Relay (SSR) • Leak monitoring • Leak stop mode (suction operation) • Extraction function for tool change • Manual fill option • Dirt filter • Unit mounted on rubberized castors • Connections: Tool hose connector G 1/2" (14 mm), Cooling water hose connector G3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m Bsdpox A Swdofx Afhocu • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulation medium: Water

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Stock no.: 503636 Machine type/Device type: Temperature control unit Manufacturer: plasma Bcedox A Svtopfx Afheu Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160° Heating capacity: 9 kW Circulation medium: Water

Condition: used, Year of construction: 2017, Plasma cutting machine from 2017, little used, made in Turkey. Fully operational. Currently selected. Technical Parameters Table surface: 2 500x 12000 mm Plasma generator: AJAN PP 260 (Precision Plasma 260 A ) Machine bridges: 1 PCS Plasma burner: Ajan (1 pc.): Gas burner: AJAN (1 pc.) + with optical ignition CNC systems: CNC control, Linux Standart equipment Ventilated width of the work table: 2500 mm Bcodpjrf S Tbjfx Afhsu Ventilated length of the work table: 12000 mm Maximum size of the sheet: 2500 x 12000 mm Quantity of bridges: 1 unit. Plasma system: PP 260 Ajan Current: 30A, 80A, 130A, 260A Cutting Ability (low-carbon steel): 32 mm Cutting Capacity (stainless metals): 20 mm Maximum piercing of holes: 40 mm Max. Cutting ability (cut from edge): 100 mm Max. Cutting capacity of the gas head: 150 mm Maximum cutting speed (theoretical): ~ Almm/min (actual speed depends on the material, brand and thickness of the piece) Positioning max: 15 m/min Re- positioning max: +/-0.01 mm Taper angle in accordance with ISO 9013 standard "range 3′ Gases for cutting: 02, N2, F5, H35 Protection: compressed air Ventilation of the table: mechanical valve Filtering: JET filter AJF Functions - a bridge controlled by two 2-way servomotors of the AC type - automatic ignition of the gas burner - automatic gas control (for plasma and gas cutting) - automatic burner height control (plasma) THC - the function of "ohmic control" - function "ARC control" - function "Microjoint" - function marking with a plasma head Control - programmable possibilities with DIN/ISO codes - Ability to work with DXF, ESSI, and NC toolpath files - Ventilator and generator for remote start and remote control with CNC - AJAN-CAD - AJAN-i own control - AJANCAM V 7.0 - AJAN-i own software The start package Include: 20 electrodes, 20 nozzles, 20 nozzle covers, 2 gas rings, 2 nozzle rings and coolant required to start the machine. AJAN-i CNC LINUX NEW from 2017! AJAN CNC based on the LINUX operating system "Allinclusive" Control Panel - Free AJAN-CAD V 7.0 - Free software updates - Geometric Shape Catalog Automatic restart if stopped (power) - Possibility of programming DIN / ISO G codes - Ability to work in DXF, ESSI trajectories and NC files - Wide selection, tuning and recording of the program - Automatic selection of material and parameters (customize) AJANCAM v 7.0 AJANCamv7.0 was developed by its own software configuration, which has the following features: - Easy to use, fast and efficient - Automatic errors, provisioning - Ability to write a text - its own directory (libary) - Automatic or manual placement - Cutting sequential modelling - According to the automatic layout of DXF and G-codes ESSI making The total ared: 384 m2 Filtration elements: 16 Elements of Noise filter: 85 dBA Ventilation Fan power: 11kW Feature blow dry with compressed air If you have more questions, welcome.

Condition: used, Year of construction: 2011, functionality: fully functional, For sale: 4 temperature control units by Plasma: Medium: water Temperature: max. 90°C Heating capacity: 9 kW Cooling capacity: 30 kW Alarm function Flow measurement Automatic water change function Bodpjx Ek Rdjfx Afhecu PT 100 sensor Interface for TTY 20 mA via 9-pin D-Sub connector

Year of construction: 2012, condition: used, functionality: fully functional, The temperature control unit from Plasma, model "Primus", is available for sale with the following technical specifications: Medium: water, Maximum temperature: 150°C, Heating capacity: 9 kW, Cooling capacity: 30 kW, Special equipment: reinforced pump K6 at 60 l/min up to max. 6 bar. The pressure booster pump is used to increase the cooling water pressure during filling; this is necessary if the system pressure is higher than the cooling water pressure. PT 100 sensor. Interface: On/Off, Alarm, PT 100, Temperature monitoring. Bcodpfsx Eg T Eex Afhou

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature control unit plasma plasTemp Primus 90 Stock no.: 503644 Machine type / Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Technical data plasTemp temperature control unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating capacity: 9.0 kW, via two stainless steel tubular heaters made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference between mold supply and cooling water of 80 K, pressure difference in the cooling water circuit min. 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Features: • Self-optimizing microprocessor controller, SBC • Digital display for setpoint and actual value of supply temperature • Maximum temperature monitoring • Automatic filling with level monitoring • Output socket for collective fault signal • Acoustic alarm indicator • Hour meter • Heating control via solid-state relay (SSR) • Leakage monitoring • Leak-stop operation (suction mode) • Draining for tool change • Manual filling • Dirt filter • Unit mounted on rubberized castors Bedpfxoxt Rddj Afhecu • Connections: Mold hose nozzle G 1/2” (14 mm), cooling water hose nozzle G 3/8” (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L=0.73m, W=0.27m, H=0.58m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2018, condition: good (used), functionality: fully functional, Temperature Control Unit plasma plasTemp Primus 90 Stock No.: 503643 Machine type / Device type: Temperature Control Unit Manufacturer: plasma Model: plasTemp Primus 90 Year of manufacture: 2018 Technical Data plasTemp Temperature Control Unit Primus 90 / Compact TK-90-9-50 - Circulating medium: Water up to 90°C - Max. external volume at 90°C: 50 liters - Heating power: 9.0 kW - via two stainless steel tubular heaters - made of highly corrosion-resistant Incolloy - Cooling capacity: 70 kW at a temperature difference between mold supply and cooling water of 80 K; pressure difference in the cooling water circuit at least 3 bar - Pump: Bronze submersible pump with Qmax = 40 l/min, Pmax = 3.8 bar - Motor power: 0.5 kW - Equipment includes: • Self-optimizing SBC microprocessor controller • Digital display of set and actual values for supply temperature • Maximum temperature monitoring • Automatic filling system with level monitoring • Output socket for collective fault reporting • Acoustic alarm indicator Bcedpfx Afsxt Rc Hjhou • Operating hours counter • Heating control via solid state relay (SSR) • Leakage monitoring • Leak-stop operation (suction mode) • Suction for tool change • Manual filling • Dirt filter • Unit mounted on rubberized casters • Connections: Mold hose nozzle G 1/2" (14 mm), Cooling water hose nozzle G 3/8" (14 mm) • Electrical connection: CEE plug 16A • Dimensions: L = 0.73 m, W = 0.27 m, H = 0.58 m • Weight: 50 kg Max. operating temperature: 90°C Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Stock no.: 503637 Machine/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Max. operating temperature: 160°C Heating capacity: 9 kW Bedpext N Hwofx Afhecu Circulating medium: Water/water

Year of construction: 2015, condition: good (used), Temperature control unit plasma plasTemp Primus 160 Stock No.: 503634 Machine/Device type: Temperature control unit Manufacturer: plasma Model: plasTemp Primus 160 Year of manufacture: 2015 Compact K-160-9-24 Bcedpfsxt N D Nex Afhsu Max. operating temperature: 160° Heating capacity: 9 kW Circulating medium: Water

Year of construction: 2016, condition: good (used), Temperature control unit plasma easytemp 95 Stock No.: 503629 Machine/Device type: Temperature control unit Manufacturer: plasma Model: easytemp 95 Year of manufacture: 2016 Bcsdsxt Nnuepfx Afhsu Max. operating temperature: 95°C Heating capacity: 6 kW Cooling capacity: 40 kW (80 °C flow / 15 °C cooling water) Heat transfer medium: Water/water

Year of construction: 2017, condition: good (used), Temperature control unit plasma easytemp 95 Stock No.: 503628 Machine/Device type: Temperature control unit Manufacturer: plasma Model: easytemp 95 Year of manufacture: 2017 Max. operating temperature: 95°C Heating capacity: 6 kW Bedpoxt Nm Rofx Afhocu Cooling capacity: 40 kW (80 °C supply / 15 °C cooling water) Heat transfer medium: Water

Year of construction: 2017, condition: good (used), Temperature control unit plasma easytemp 95 Stock no.: 503627 Machine type/Device type: Temperature control unit Manufacturer: plasma Bcedpfxjxt Nm Ds Afheu Model: easytemp 95 Year of manufacture: 2017 Max. operating temperature: 95°C Heating capacity: 6 kW Cooling capacity: 40 kW (80°C supply / 15°C cooling water) Heat transfer medium: Water

Condition: new, Year of construction: 2024, NEW PLASMA CUTTER 3,000 x 1,500 GENERATOR 120 A Plasma Cutting NEW . Complete with CAD CAM softwere. DWG and DXF data transfer via USB and network card. CE mark. ISO 9001, GB/T 19001. 120 A generator. Bcsdpfetu E Dujx Afhju The cost of production is ridiculous only 5.5 kW and compressed air!!!

Year of construction: 2000, condition: ready for operation (used), A Plasma Finish low-pressure plasma system for surface treatment of workpieces is available. Chamber volume: approx. 15l, internal chamber dimensions X/Y/Z: 250mm/250mm/250mm, plasma frequency: 2.45GHz, plasma type: microwave, power range: 100W-600W, machine dimensions X/Y/Z: approx. 700mm/900mm/1850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Bcedpfxexghn To Afhou

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, overall weight: 8,000 kg, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,500 mm, controller model: Vision 52, TECHNICAL DETAILS Travel path X-axis: 6,000 mm Travel path Y-axis: 2,500 mm Processing thickness: 2 to 40 mm plasma, 150 mm oxy-fuel MACHINE DETAILS Control type: Vision 52 Resonator type: Precision Plasmarc 401 Dimensions & Weight Bcjdpjyd Ikdefx Afhsu Dimensions (L x W x H): 8,000 x 2,400 x 2,500 mm Track: 8,000 x 4,500 mm Weight: 8,000 kg Transport packages: 1 EQUIPMENT Off-line software Libellula Documentation CE marking CE certificate Accessories and consumables

Condition: good (used), Plasma hose assembly, welding torch, MIG/MAG torch -Manufacturer: Kjellberg, Plasma machine torch hose assembly, water-cooled -Type: PerCut 100-1/O2 Bcjdpfx Aox Einpofhju -Item No.: 11.835.421/56615/020 -Length: 7.0 m -Transport dimensions: Ø 560 x 170 mm -Weight: 10 kg

Condition: like new (used), Year of construction: 2018, operating hours: 700 h, functionality: fully functional, type of input current: AC, sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, overall weight: 5,000 kg, workpiece weight (max.): 4,000 kg, cutting current: 200 A, KOIKE Gammatec 2040 – CNC Plasma Cutting Machine for Sale 📌 Manufacturer / Model: KOIKE Gammatec 2040 📆 Year of manufacture: 2019 📍 Location: Finland 💪 Powerful and precise CNC plasma cutting solution The KOIKE Gammatec 2040 is a heavy-duty industrial CNC plasma cutting machine, designed for high accuracy and reliable production. It is an excellent choice for metal workshops, fabrication companies, and industrial manufacturing environments. 📊 Technical specifications 📏 Cutting area (X × Y): 4,000 × 2,000 mm 🔪 Maximum cutting thickness: up to 60 mm 🌀 Number of torches: 1 🧠 Control system: CNC ⚡ Plasma system: Kjellberg HiFocus 🔌 Power requirement: approx. 2 kVA 📦 Machine dimensions: approx. 5,000 × 2,400 × 1,000 mm ⚖️ Machine weight: approx. 4,000 kg 📈 Key advantages ✅ Large cutting table (4 m × 2 m) – ideal for large metal sheets ✅ CNC-controlled precision for industrial production ✅ Proven KOIKE quality and robust machine design ✅ Suitable for continuous workshop or factory use 🛠 Condition 🔹 Used – very good condition The machine can be inspected and tested prior to purchase. Power source: Smart Focus 200 Mains voltage: 3 × 400 V, 60 Hz Cutting current: 35 – 200 A Marking current: 10 – 50 A Cutting range: Maximum: 60 mm Recommended: 1 – 10 mm Piercing: Maximum: 32 mm Plasma gases: O₂, Ar / H₂, N₂, Air Piercing gases: Ar, N₂ Dimensions (L × W × H): Bcjdpfoygk Sijx Afheu 1030 × 680 × 1450 mm Mass: 388 kg Plasma machine torch: PerCut 4000 Quick change head: PerCut 4000

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Microstep Model: MasterCut Compact 3001.15P Year of manufacture: 2023 CNC control system Working area: 1,500 x 3,000 mm 1 x plasma torch with Hypertherm Powermax 45 power source Air plasma system Piercing thickness: 12 mm For thin sheet metal Without filter Bedpfxoydibqo Afhjcu Available: March 2026 3226ä

Condition: used, Year of construction: 2007, functionality: fully functional, For sale: CNC Plasma Cutting Machine for Flue Pipe and Ventilation Component Production Condition: Used, in good technical order, currently connected – available for on-site inspection and testing. This equipment is designed for manufacturing pipes, flue pipes, and ventilation elements from sheet metal and light metals. Technical Specifications Model: TTENGINEERING Made in: Italy Year of manufacture: 2007 Pipe cutting diameter: from Ø60 mm to Ø600 mm Maximum workpiece length: 1500 mm Sheet thickness (official): 0.5 – 1 mm Tested capability: cuts up to 3 mm wall thickness (depending on plasma source power and metal type) Plasma sources: 2 units – 60A and 80A Plasma power: 60 A / 80 A (depending on selected source) Features and Equipment: - Fully programmable CNC-controlled machine Bedpfx Afjxlp Sqshocu - Capability to generate cutting contours based on models or templates - Precise automatic positioning and rotation system - Adaptable to different pipe diameters - Integrated plasma cutting control system with adjustable power - Supplied with two plasma sources (60A and 80A) to suit product requirements Applications: - Suitable for the production of ventilation systems, flue pipes, air ducts, and various tubular structures. - Ideal for cutting thin sheet metal (0.5–1 mm) and processing thicker wall sections (up to 3 mm). - Utilizes CNC technology to ensure high cutting precision and repeatability while reducing manual labor needs. If you have any further questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2024, neu 2024 2517 prompt, Zwischenverkauf v Deutschland 36720 € 701.35 € 1 Bjdpfx Aewva Iasfhecu 1500x3000 mm Hypertherm Powermax 125 25 mm 25 mm 57 mm 25 mm 125 A 24 m/min 1/10 mm 400 kg/m² 3560 mm 1960 mm 1500 mm 650 kg DEMO MACHINE compressed air powered plasma sourceHYPERTHERM Powermax 125 CNC-workbench software (external PC not included) Height adjustment by arc voltage Set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules INCL. FOLLOWING OPTION: Suction bridge (prepared for suction diam. 160 mm)

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 25400 € 485.14 € 1250x2500 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min 1/10 mm 470 l 500 kg/m² 3060 mm 1760 mm 1500 mm 500 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt Bedowiryujpfx Afhscu driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 Sync plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25 mm price € 26.900,- € 28.400,- € 29.900,- € 32.800,- OPTIONS: water tank to quickly fill and drain thetrough € 2.870,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 23200 € 445.44 € 1000x2000 mm HYPERTHERM Powermax 45 XP 6 mm 12 mm 25 mm 4 mm 45 A 45 A 50 % ED, 32 A 100 % A 24 m/min unter 1/10 mm 300 l 400 kg/m² 2560 mm 1460 mm 1500 mm 400 kg compressed air powered plasma sourceHYPERTHERM Powermax 45 XP CNC-workbench software (external PC not included) height adjustment by arc voltage set-up laser precision profile rail guide(HiWin) zero backlash HTD drive belt driven by step motors solid frame construction seperate renewable support grate water trough to catch flying sparks swimming burner bearing in combination with exchangeable slide screws, enables constant cutting height hand operation unit for comfortable processing and set up on the workpiece users manual in GERMAN according to CE rules ALTERNATIVE PLASMA SOURCES: HYPERTHERM PMX 65 Sync PMX 85 Sync PMX 105 Sync PMX 125 plasma type comp. air comp. air comp. air comp. air plunge power 16 mm 20 mm 22 mm 25 mm seperating cut 32 mm 38 mm 50mm 57mm recommended thickness (unalloyed steel) 6 mm 16 mm 19 mm 22mm max. thickness (unalloyed steel) 16 mm 20 mm 22 mm 25mm price € 24.600,- € 26.100,- € 27.600,- € 30.600,- Options: water tank to quickly fill and drain thetrough € 2.360,- pneumatic marking pin € 770,- pneumatic engraver € 1.920,- suction bridge (prepared for suction diam.160mm, important for galvanized and thin sheets) € 1.020,- Bodjwiq Scepfx Afhjcu suction- and filter unit Caremaster IFA 1,1 kW, fan power 2.500 m³/h € 2.950,- higher gantry 200 mm € 710,- higher gantry 300 mm € 900,- automatic nesting € 500,- PlasmaScan camera system € 830,- ohmic contacting for MaxPro200 € 280,-

Condition: good (used), Year of construction: 2007, CNC portal plasma cutting machine Manufacturer: Microstep Model: SPL-P 12001.20 Bcedjuv Hkgjpfx Afhou Year of manufacture: 2007 CNC control 1 plasma torch with power source Kjellberg HiFocus 160i Extraction table: 2 x 12 m Filter system Donaldson Torit DCE

Condition: good (used), Year of construction: 2012, In good technical condition and fully functional. Year of manufacture 2012. Table size 6x2m + overlaps in both axes of the order of 50 mm. Plasma source Kjellberg HiFocus 280i. Extraction and filtering fully automatic TEKA system, Käser SM9 compressor. Bcodpfxox Ttmkj Afhou Autogenous option YES, separate burner part of the machine.