Used Powder for sale (1,132)

Condition: new, Year of construction: 2026, overall weight: 1,900 kg, Big Bag unloading station complete with electric lifting hoist, discharge hopper, structural steel support frame, service platform with access stairs, and perimeter safety guards. Suitable for handling and unloading various bulk materials, including plastic granules, plastic flakes, flour, powders, and similar products. Bedpjz Hlgkofx Aczeww

Condition: used, Year of construction: 2016, Conveyor system for bulk solids Bjdpfxez R Auuo Aczoww Bulk solids conveying system using a flexible screw. The system comprises a FLEXICON stainless steel hopper with a pyramidal bottom, support legs and capacitive level sensor. UTFS-S045-010-X tubular conveyor, approximately 2 m long, fitted with a 114 mm diameter UHMW polyethylene outer tube and flat profile flexible internal screw. Discharge head with DRP-02214T-05-X geared motor. The drive incorporates a 2.2 kW three phase motor operating at 1,425 rpm and 50 Hz, with IP55 protection. The system is ATEX II 3D T125 certified, suitable for operation in Zone 22 environments containing combustible dust. Designed for conveying pellets, plastic granules, powders and other solid products with minimal segregation of blended materials.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Electric & manual hydraulic pump, loading ramp set (ramps + supports), parabolic suspension +100km/h Bjdpfxoz Ri A Ss Aczeww Equipment: -Full steel floor -H-frame front -5-stage cylinder Net price: €9,050.42 / Gross price: €10,770.00 Article number: CHP235331811.05 Technical data: • Brand: Hapert Trailers • Model: Cobalt Plus • Vehicle type: Three-way tipper • Vehicle condition: New vehicle • Initial registration: No initial registration • TÜV/HU: 2 years from initial registration • Internal dimensions (LxWxH): 335 x 180 x 40 cm • External dimensions (LxWxH): 468 x 186 x 113 cm • Loading height of the floor: 73 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,106 kg • Payload: 2,394 kg • Chassis: High-loader (wheels under the body) • Tires: 185/70R13C • Suspension: KNOTT parabolic suspension + 100 km/h • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Yes DESCRIPTION • New side panel hinges incl. welded-on hooks for attaching a cargo net, etc. • 40cm aluminum side panels with robustly integrated locks • Aluminum side panels, anodized, double-walled • Powder-coated side panels (anthracite/black) • All side panels foldable and removable • Steel corner posts, removable • Insertion possibility at all 4 corners for tarpaulin frames, grating attachments, side panel attachments or front wall extensions • Cargo net hooks on hinge lower parts • Stable eccentric locks • High grating 185x70cm for insertion • Full steel floor, 3mm hot-dip galvanized - extremely robust • Reinforced, firmly screwed V-drawbar • Very stable steel frame, welded • Frame completely hot-dip galvanized • Numerous cross members, resulting in high point load capacity • Additional longitudinal struts, continuously welded • All cross and longitudinal members rest on the ground • 6 lashing eyes recessed inside the side edge (1000DaN/kg), TÜV certified! • U-profile on the rear for easier attachment of the loading ramps • Loading ramp compartment with license plate flap • 2x integrated aluminum ramps, 250cm, load capacity: 3,600 kg • 2x crank supports, rotatable & crankable, heavy-duty • 1x crank for rear supports incl. holder • Solid 5-stage hydraulic cylinder • Electric hydraulic pump with battery (12V/90AH) in the box incl. cover • Detachable remote control for electric hydraulics with spiral cable and battery status display • Manual hydraulic pump • External battery charging socket for 230V charger • Hapert 230V battery charger for Cobalt tipper • Parabolic axle from KNOTT • Shock absorbers for 100km/h, installed • Parabolic axle for absolute driving comfort! • Reinforced tires 185/70R13C • Reversing automatic • KNOTT inertia coupling and parking brake • 13-pole plug • Reversing lights • Large-sized safety lighting • Full-LED taillights incl. tail light protection grille • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced 70mm automatic support wheel with console

Condition: like new (used), functionality: fully functional, machine/vehicle number: GEADDL-MLAB-G02-900028, Year of construction: 2021, operating hours: 800 h, total length: 1,220 mm, total height: 1,850 mm, total width: 705 mm, type of input current: AC, overall weight: 700 kg, input voltage: 230 V, input current: 7 A, input frequency: 50 Hz, laser power: 100 W, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, table width: 90 mm, table length: 90 mm, We offer this showroom Concept Laser Mlab 100R metal 3D printer - Laser Powder Bed Fusion system (LPBF / SLM) Specification: - Manufacturer: Colibrium Additive / GE Additive / Concept Laser from Lichtenfels, Germany - 100 W singlelaser, 2D optics ScanLab - Build envelope: 90 x 90 x 80 mm - Max. scanning speed: 7 m/s - Focus diameter: 50 μm - Layer thickness: 15 - 50 μm - Connected loads: 1,5 kW; Power supply 1/N/PE AC 230 V, 16 A connector - Inert gas supply: 1 gas connection provided - Ar or N2 (machine was used with argon mostly) Bwodpfxjz Tut Us Aczow - Filtering system: integrated - Dimensions 705 x 1220 x 1848 mm (W x D x H) - Weight: approx. 600 kg - Operating conditions: 15 - 30°C - Holders for different recoater blades types included - A few stainless steel build plates included Includes material parameters for: - Remanium star CoCr alloy, - Parameters for other materials can be inquired from manufacturer. (316L, 17-4 PH, TiAl6V4, CpTi,...) Machine has been used with remanium star only. It is biomedically clean. Age and condition: like new Machine installed at showroom in 2021 for demonstration purposes only: Building demo parts for potential customers, buildjobs at trade fairs and our customer open days. Basically, not more than 5% usage of what could be expected of its age. Maintained by certified service technician only. All manufacturers service safety patches and updates until this date have been applied. Machine clock: 800 hours - not a "Laser ON time", that is expected significantly lower. Original price: 100.000 Eur Optional auxiliary equipment (not included in listing price): - Nitrogen generator with integrated compressor: Parker HPN2-12500C-E - no need for compressed air + 3.000 Eur - Table sieving station Retsch AS 200 + 1.000 Eur - Isolation transformer - needed if machine is connected to home-grade (30 mA) breaker. + 1.000 Eur If you have any questions or need more information, feel free to send us a message or give us a call. Video conference can be set up if needed. Machine can be seen at our showroom. Visit is possible upon contact. Misan is Czech authorized reseller for metal AM machines.

Condition: excellent (used), pressure: 3 bar, temperature: 134 °C, type of input current: three-phase, input voltage: 400 V, usable tank capacity: 2,500 l, Used Becomix production plant consisting of main mixer RW2500 and pre-mix vessel AB1200 for mixing, dispersing, homogenizing and emulsifying on an industrial scale. Originally used for sterile skin care products. Very good condition, complete factory overhaul planned (new seals, piping, pneumatics and control, homogenizer and drives overhauled), new stainless steel platform included. MAIN MIXER RW2500 • Working volume approx. 600–2,500 L, total volume approx. 3,458 L, 316L mirror polished • 0–3 bar, vacuum to -1 bar, up to 134 °C, jacket, TÜV approved • Anchor agitator with PTFE scrapers approx. 30 kW, rotor-stator homogenizer approx. 45 kW (5–25 m/s) • Recirculation line DN100, hydraulic lid PRE-MIX VESSEL AB1200 Bedpfxs Ad H Iqj Aczeww • Working volume approx. 400–1,200 L, turbo agitator, two-zone heating, transfer line FURTHER EQUIPMENT • CIP for both vessels incl. CIP rack, CIP/SIP capable, aseptic valves • Water ring vacuum pump approx. 200 m³/h, powder suction and liquid dosing • New Siemens PLC with touch panel, recipe control, GMP documentation SERVICE • Turn-key installation and commissioning available • 12 months warranty (excluding wear parts) Inspection in Weyhe near Bremen, Germany, by appointment. Questions or more photos? Simply send us an inquiry. Offer subject to prior sale by an independent dealer, not affiliated with the manufacturer.

Condition: new, axle configuration: 2 axles, loading space length: 66,000 mm, loading space width: 2,550 mm, suspension: air, tire size: 265/70-19,5, color: black, = Additional Options and Accessories = - LED lighting - Air suspension = Notes = Internal number for customer inquiries: 2-375 Available immediately !!! SPECIAL PRICE !!! GREATER LOAD VOLUME PAVIC HTA 20 66 ZNL (Twin tires, Low, Light) Short log trailer for wood transport, very low construction, from the ground to the top edge of the platform only 1,250 mm! * 2-axle platform trailer * 4x OPTIPA SL platforms * 8x OPTIPA AL10 aluminum side posts * Loading area length 6,600 mm * Screwable hooks on the loading platforms for securing the load * Permissible total weight 18,000 kg, technically possible 20,000 kg * Payload 14,800 kg, technically possible 16,800 kg * EBS / ABS * Wabco SmartBoard with weighing system * Signal light system for detecting the max. air spring pressure * Air suspension * Safety cables for air suspension * 2 x 10 t SAF OFF ROAD axles * Disc brakes (on request, drum brakes can be supplied upon order) * Air tanks 2x 60 l made of aluminum * Y-drawbar with 40 mm drawbar eye * Steering ring with double ball bearing, permissible axial load max. 20t * Lifting cables at the front and rear * High-quality LED tail lights and position lights * LED work lights * High-quality powder coating - coating including baking process * Twin tires: 265/70 R 19.5 with branded tires Financing possible through our financing partners. For further questions, our sales team will be happy to assist you. This is a non-binding offer. Subject to prior sale, errors and changes. = Further Information = Axle configuration Tire size: 265/70-19.5 Brakes: Disc brakes Suspension: Air suspension Front axle: Steered Weights Unladen weight: 3,100 kg Payload: 18,000 kg GVW: 20,000 kg Functional Brand of the body: PAVIC short log platform OPTIPA SL Condition Overall condition: very good Technical condition: very good Bedpfxezqakhe Aczsww Optical condition: very good

Condition: new, new ! all stainless steel speed : 27 rpm 2 mixing directions safety lid CE-approved power : 2,2 kW overall dimensions (l x w x h) : ± 1.400 x 1.000 x 1.600 mm The Barmix 200 liter paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood Bjdpfxez Nxg Rj Aczjww Also suitable for dry products, such as herbs, ingredients, powders, granules, nuts, grains, seeds, kernels, dried fruit, Granola, etc.

Year of construction: 1993, condition: used, Year of construction: 1993 Empty weight: 9.300 kg Dimensions (LxBxH): 442 x 280 x 195 cm Serial number: 210045 Year of manufacture: 1993 Cutting force: 20 metric tons, 200 kN Maximum sheet thickness for punching and nibbling: 6.4 mm Maximum punch diameter: 88.9 mm Working range in the transverse direction (X-axis): 1,270 / 2,540 mm Working range in the longitudinal direction (Y-axis): 1,000 mm Control system: Fanuc 16P Tool changer: yes Number of tool stations: 19 positions (16 fixed + 3 index) Required power capacity: 23 kVA Turret revolver with 16 + 3 x Auto Index Holders Length: 4,425 mm Width: 2800 mm Height: 1950 mm Weight: 9300 kg Central lubrication: yes Condition: fully serviced and overhauled Additional loading charges may apply Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: Bjdpfx Acjz R S Thszsww - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Empty weight: 8.700 kg Dimensions (LxBxH): 90 x 72 x 110 cm Serial number: 98077 Control system: Mazatrol M32B X-axis: 1050 mm Y-axis: 510 mm Z-axis: 560 mm Work table dimensions: 1300 × 550 mm Maximum load: 1,500 kg Spindle: Taper: BT50 / CAT50 Speed: 25 – 6,000 rpm Power: 15 kW / 18.5 kW (peak) Tool changer: 1 Capacity: 30 tools Weight: 8,700 kg Power supply: 380 volts Overall dimensions: 3,000 × 3,800 × 2,250 mm Bwedpfx Acjz R S Tuezsw Includes: Matching tool cabinet with various tool holders Tool cabinet dimensions: 900 x 720 x 1100 mm Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Width: 60 cm Complete roll forming line equipped with tools for the production of a new type of industrial gutter for galvanized steel/stainless steel CE compliant Uncoiler capacity: 2 metric tons Maximum width: 600 mm Coil inner and outer diameters: 508–920 mm Hydraulic claw extension: 460 > 640 mm 4 kW Roll Forming Line Type H 18 stations Maximum width: 600 mm Maximum thickness: 0.8 mm Shaft diameter: 60 mm Maximum center-to-center shaft distance: 300 mm Bedpoz R S T Uefx Aczoww Siemens Simatic touchscreen control + Ethernet connection 7.5 kW Hydraulic shear Force: 5 metric tons Condition: machine has seen very little use Online auction of metalworking machines, woodworking machines, overhead cranes, workshop equipment, and lumber inventory, including an AMADA Arcade 210 CNC punch and nibbler, MAZAK VTC-41L and MT-V-515 vertical CNC machining centers, MAZAK Super Turbo-X 48 Mk II CO₂ laser cutting machine, BYSTRONIC Byjet 4022 CNC waterjet cutting machine, TECNOMA profiling and roll forming machines, ELUMATEC and EMMEGI aluminum sawing machines, HACO ERMS 200-metric-ton CNC press brake, ADIRA CNC press brake, LEFORT C 265T hydraulic scrap baler/shear combination, ESAB Pegasus CNC plasma cutting machine, GEMA powder coating machine with drying oven and exhaust system, EURO-MAC punching and nibbling machine, various KONE and DEMAG overhead cranes, VECOPLAN industrial shredder, NEDERMANN filter unit, METORA band saw, various metalworking and woodworking machines, panel saws, edge banders, milling machines, drills, compressors, workbenches, teak beams, sawn logs, and various accessories, etc. The online auction opens Wednesday 14 October and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 17 November Pickup days are on: - Tuesday 1 December - Thursday 3 December Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: SN210551, overall weight: 14,000 kg, type of input current: AC, input voltage: 400 V, power: 400 kW (543.85 HP), Equipment: type plate available, A MIXACO heating/cooling mixer is a combined system consisting of a heating mixer and a downstream cooling mixer, specifically designed for the processing of powders, granules, and compounds (e.g., PVC dry blends, WPC, or masterbatches). Technical specifications – summary (details can be found in the documents): Hot mixer: • Volume: 3500 liters – Usable volume: 2500 liters • Tip speed: 5-50 m/s • Made of duplex steel – 1.4462 stainless steel • Power drive with 400 kW FC controlled • Vacuum up to 150 mbar abs. Cold mixer: Bsdpsz Iww Rjfx Aczeww • Volume: 9000 liters – Usable volume: 7650 liters • Tip speed: 3.5 – 7 m/s • Made of 1.4541 stainless steel • Power drive with 90 kW FC controlled The operating principle is divided into two physically and apparatus-wise separate process phases: 1. The heating mixer phase (heating and homogenizing) • Mechanical friction: In the heating mixer, a modular mixing tool rotates at a high circumferential speed (approx. 10–40 m/s). The intense flow and vortex formation (mixing vortex) causes the particles of the mixture to rub intensely against each other. • Heating: This mechanical friction generates the necessary thermal energy directly in the product, quickly and evenly heating the material to the desired target temperature (sometimes exceeding 100 °C). • Recipe component addition: At the same time, all recipe components, such as additives, dyes, or liquids, are perfectly homogeneously distributed. An integrated aspiration system also ensures the dehumidification of the mixture. 2. The transfer • Once the target temperature defined in the process program is reached, a contoured, dead-space-free outlet opens on the heating mixer. • The hot, homogeneous mixture is transferred with minimal residue and quickly to the cooling mixer, which is located directly below or next to it. The heating mixer is then immediately available for the next batch. 3. The cooling mixer phase (gentle cooling) • Heat exchange: In the cooling mixer (available in vertical or horizontal design), the hot material is passed over cooled surfaces. • Water cooling: A targeted cooling water circuit in the double jacket (bottom and side walls) efficiently removes thermal energy from the dry blend. • Agglomeration prevention: A slow, material-friendly stirring mechanism keeps the mixture in motion until the final storage temperature is reached. This prevents caking (compaction) due to residual heat before the material is transferred to silos or further processing. Summary created with AI. The units can be inspected in operation in the Netherlands. The system for sale was used in the R&D center of UBQ for development purposes. This explains the very good condition for the low number of production hours. We also have a steel structure available for the setup. This is not included in the price. If there is interest, it can be negotiated separately. Currently, the system is located outside of Europe – we need to determine whether direct transport is feasible or whether import to Europe by UBQ is more sensible (which would allow for a sale within Europe with a reverse-charge mechanism).

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Oven for powder coating, with internal dimensions of 8200x1600x3600. Bjdpfxszylxcj Aczeww Gas burner with a power output of 125-390 kW.

Condition: used, Year of construction: 2020, operating hours: 288 h, functionality: fully functional, working width: 430 mm, area performance: 1,720 m²/h, overall weight: 115 kg, tank capacity: 25 l, total height: 1,025 mm, total width: 520 mm, total length: 1,135 mm, water tank capacity: 25 l, empty load weight: 40 kg, This used ride-on scrubber-dryer, model BD 43/25 C Bp Pack from Kärcher (year of manufacture: 2020 | operating hours: 288), has been technically refurbished and cosmetically restored in our in-house workshop. Among other things, new, maintenance-free gel batteries and new rubber squeegees have been installed. The disc brush has also been replaced. The suction bar has been sandblasted and powder-coated with a new finish. The dirty water tank lid has been replaced with a new one. The BD 43/25 C Bp Pack is ideally suited for economical basic and maintenance cleaning of areas up to 900 m². Due to its maneuverability and ease of handling, it is also perfectly suitable for cleaning areas with obstacles. It is operated with a 24-volt battery, and a separate charger is included. The EASY-Operation system, with its characteristic yellow controls, ensures easy operation and very short learning times. Cleaning and maintenance work on the machine is equally easy to perform. Technical data: Working width, brushes: 430 mm Working width, suction: 750 mm Tank capacity, fresh/dirty water: 25/25 l Bedpfs Aa Nccex Aczjww Theoretical area performance: 1720 m²/h Practical area performance: 860 m²/h Permissible total weight: 115 kg

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Doors and walls made of powder-coated steel sheet and aluminum profiles 2 doors, position of the doors can be selected individually (opening approx. 2200 mm) with 1 privacy screen (wavelength 1080 nm (OD 10+)), size approx. 500x300mm without roof (roof and ventilation opening available separately) for lasers with a wavelength of 940-1090nm, power max. 1500W, maximum permissible exposure (MPE) max. 3.67x10^6 W/m² incl. LED strips for signaling at the corners (RGB colors) incl. assembly instructions incl. operating instructions Laser welding machine Exhaust system (not included in the scope of delivery) FURTHER DETAILS AND INFORMATION AVAILABLE UPON REQUEST Bwjdpfxoz Srcks Aczsw PLEASE SCHEDULE A SITE VISIT WITH US.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-14, empty load weight: 814 kg, maximum load weight: 1,886 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,700 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K3 306 170 2700 2 3-way tipper + enclosed leaf guard 60cm NEW VEHICLE Internal dimensions: 306cm x 170cm Side board height: 30cm Loading area height: 66cm Total weight: 2700kg Payload: 1886kg braked tandem trailer overrun brake and parking brake from KNOTT 2x 1350kg axle with brake low chassis fully welded, hot-dip galvanized steel frame aluminum profile side boards with tension lock can be folded down and removed on all sides enclosed leaf guard 60cm made of hot-dip galvanized steel can also be opened and removed on all four sides 15mm thick, non-slip and robust screen-printed wood floor additional steel plate on wood floor automatic support wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force reinforced 13" C tires with steel valve M+S tires net/rope hook on the frame 13-pin connector LED marker lights at the front lights at the rear with reversing light and triangular reflectors upper frame mounted on rubber large tipping angle of 51 degrees to the rear hand pump with adjustable handle OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side boards (price reduction) -Side board height increased to 35cm -Black Edition (powder-coated side boards and rims in black) -integrated loading ramps 2800kg -electric tipping control -charger -remote control -Bluetooth remote control -emergency hand pump in combination with electric control -safety support for maintenance work on the tipped vehicle -foldable crank for rear supports -complete LED lighting -theft protection -net with fine or coarse mesh -H-frame -leaf guard in various heights, also closed -additional side boards 30cm with tension lock -flat cover with or without railing -high cover 160cm or 180cm further accessories on request! plus. freight to Gera and vehicle registration document €250 net Images are for illustrative purposes only and may show optional accessories at an extra charge. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pick-up. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repair, also for caravan trailers. Bwedjz Egkhspfx Aczjw Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: good (used), Year of construction: 2002, operating hours: 1,378 h, Brand: Berstorff Type: ZE 25 compounding line Serial no.: 90200771-0010/2002 Year of manufacturing: 2002 Operating hours: 1,378 Screw diameter: 25 mm Screw L/D: 44 Dimensions (LxWxH): 4,500 x 1,200 x 2,200 mm Bsdpfxsz Eg Awe Aczeww Weight: 1,350 kg Line configuration: – 1x gravimetric powder feeding system from Brabender – 1x vent port for degassing, including vacuum pump – Filament die with 6 cavities – Cooling roll with tempering unit – Pelletizer with adjustable speed – Central control cabinet Other: All documentation available in German The machine was originally used for biomaterials

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, Smooth exterior walls Equipment: - 40mm insulated wall - +2° C to +10° C - GOVI 1600N Net price: €10,546.22 / Gross price: €12,550.00 Article number: UC6230341819.01 Technical data: • Brand: Unsinn • Model: UKT 6C 3417-30-14 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: Not yet registered • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 340 x 175 x 190 cm • External dimensions (LxWxH): 542 x 229 x 256 cm • Loading height of the floor: 59 cm • Permissible total weight: 3,000 kg • Tare weight: 995 kg • Payload: 2,005 kg Bwsdpfx Aozy Ai Ssczow • Chassis: Low loader (wheels beside the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant aluminum chassis for safe driving characteristics • Loading area made of multi-layer glued screen printing plate, 18 mm • 4 stable telescopic crank supports for up to 6000 kg of static weight • Thermo-sandwich structure • Interior and exterior shell made of hot-dip galvanized and powder-coated steel sheet, for robust use • Insulation 40 mm PU core • Exterior color silver RAL 9006 • Rear door, double-wing with aluminum hinges • Refrigerated compartment cam lever lock and stainless steel door latch • Rear frame and edge profiles made of special aluminum profiles, anodized for attractive aesthetics • Impact protection 200 mm at the bottom, all around • Refrigeration unit Arktik 1600 N • Cooling capacity 1800 watts at a refrigeration compartment temperature of +6° C and an ambient temperature of 30° C • Temperature control range from +2° C to +10° C • Air volume flow evaporator: 750 m³ • Completely encapsulated unit with "outdoor" housing mounted at the front on top • Environmentally friendly, CFC-free refrigerant • Electronic automatic defrost system for the evaporator • The control display can be locked and is thus protected against unauthorized operation • Electronic digital thermostat for optimal control of the temperature range • 230 Volt interior lighting • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Reverse automatic • Plastic mudguards • 13-pin connector • Rear lights • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any desired features! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transport license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Ramp, side door, sandwich construction Equipment: - Lashing rails - 30mm Iso wall - Aero slope Net: €8,373.95 / Gross: €9,965.00 Article number: TKC227401820.07 Technical data: • Brand: Vezeko • Model: TK C • Vehicle type: Box trailer • Vehicle condition: New • First registration: No first registration • TÜV/MOT: 2 years from first registration • Internal dimensions (LxWxH): 405 x 184 x 205 cm • External dimensions (LxWxH): 563 x 235 x 269 cm • Loading height of the floor: 59 cm • Permissible total weight: 2,700 kg • Tare weight: 865 kg • Payload: 1,835 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Reinforced, stable, bolted V-drawbar • Very stable aluminum frame • Frame very torsion-resistant due to its stable construction • Floor panel made of Finnish multiplex • Many cross members, resulting in high point load capacity • Body made of very solid steel sheet sandwich, insulated, 30mm thick • Top layers made of hot-dip galvanized and additionally powder-coated steel sheet • Roof made of GRP sandwich 25mm • Aerodynamic slope on the side wall • Non-slip with gas springs • 2x maneuvering handles at the front • Doors with special sealing profiles, made of hard/soft plastic • Side door, standard on the right front, with three-bolt safe locking mechanism, lockable from inside and outside • Rear frame on hot-dip galvanized steel, welded solid • 8 lashing eyes recessed into the floor (750DaN/kg) • Slotted-hole lashing rail mounted on both sides, h=90cm • 100 mm impact protection all around in the interior • Maintenance-free rubber spring axles from ALKO • Reverse drive automatic • ALKO overrun device and parking brake • Plastic mudguards • 13-pin connector • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop! - Please feel free to request specific options! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - authorized dealer & repair - workshop for over 30 years. Bwsdpfx Acozy Arajzow - Errors, omissions and prior sale excepted.

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Aluminum cover, front-mounted, 1x side panel extension Equipment: - 4x tie-down points - Steel cover - Steel side panels Net price: €3,352.94 / Gross price: €3,990.00 Bwjdpfxozy Ar Tj Aczjw Article number: KEU375241211.01 Technical data: • Brand: TPV Trailers • Model: KT-EU3 • Vehicle type: Covered trailer • Vehicle condition: New • First registration: Without first registration • TÜV/MOT: 3 years from first registration • Internal dimensions (LxWxH): 243 x 123 x 106 cm • External dimensions (LxWxH): 356 x 168 x 178 cm • Loading height of the floor: 50 cm • Permissible total weight: 750 kg • Tare weight: 349 kg • Payload: 401 kg • Chassis: Low loader (wheels next to the body) • Tires: 145/80R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Yes DESCRIPTION • Side panels made of 1.5 mm steel sheet with aluminum-zinc coating • with 1x side panel extension • Continuous longitudinal beams (3 pieces) • Screen-printed plywood floor, 9mm, continuous without joints, non-slip and waterproof • Eccentric locking mechanisms for the rear door and cover • Galvanized V-drawbar • Plastic mudguards • Cover made of steel, KTL-coated and black powder-coated, 56 mm high with roof rails, splash-proof • Load capacity of the cover: 20 kg open / 75 kg closed • 4 tie-down eyes mounted inside on the floor • Maintenance-free rubber spring axle from KNOTT • 100 km/h manufacturer approval • 2x rear supports mounted • Support wheel mounted with clamp • 13-pin connector • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to inquire about special requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been a specialist dealer & repair - workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix for over 30 years - Errors, omissions and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Rear doors, smooth exterior walls Equipment: -+2° C to +10° C -GOVI 1600N -40mm insulated wall Bsdpfx Acjzy A Ihozoww Net price: €9,151.26 / Gross price: €10,890.00 Article number: UC6226301519.01 Technical data: • Brand: Unsinn • Model: UKT 6C 3015-26-14 • Vehicle type: Refrigerated trailer • Vehicle condition: New • First registration: without first registration • TÜV/MOT: 2 years from first registration • Interior dimensions (L x W x H): 300 x 150 x 190 cm • Exterior dimensions (L x W x H): 441 x 207 x 251 cm • Loading height of the floor: 55 cm • Permissible total weight: 2,600 kg • Tare weight: 825 kg • Payload: 1,775 kg • Chassis: Low loader (wheels next to the body) • Tires: 185/65R14 • Suspension: ALKO rubber spring axle • Support wheel: Yes, automatic • 100km/h approval: Optional, can be retrofitted DESCRIPTION • Unique, torsion-resistant aluminum chassis for safe driving characteristics • Loading area made of multi-layered glued screen printing board, 18 mm • 4 stable telescopic crank supports for up to 6000 kg standing weight • Thermo-sandwich body • Interior and exterior shell made of hot-dip galvanized and powder-coated steel sheet, for robust use • Insulation 40 mm PU core • Exterior color silver RAL 9006 • Rear door double-wing with aluminum hinges • Refrigerated compartment pressure lever lock and stainless steel door latch • Rear frame and edge profiles made of special aluminum profiles, anodized for aesthetically pleasing design • Impact protection 200 mm at the bottom, wraps around 3 sides • Refrigeration unit Arktik 1600 N • Cooling capacity 1800 watts at a refrigerated room temperature of +6° C and an ambient temperature of 30° C • Temperature control range from +2° C to +10° C • Air volume flow evaporator: 750 m³ • Completely encapsulated unit with "outdoor" housing, mounted on the front side at the top • Environmentally friendly, CFC-free refrigerant • Electronic automatic defrost of the evaporator • The control display is lockable and thus protected against unauthorized operation • Electronic digital thermostat for optimal control of the temperature range • 230 volt interior lighting • Very stable V-drawbar, REINFORCED • ALKO overrun device and parking brake • Automatic reversing function • Plastic mudguards • 13-pin plug • Reversing lights • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame • Reinforced automatic support wheel, for safe parking of the loaded trailer, load capacity 500 kg _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific wishes! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates incl. customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: new, functionality: fully functional, machine/vehicle number: NEW-23, empty load weight: 642 kg, maximum load weight: 2,058 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,060 mm, loading space width: 2,040 mm, loading space height: 350 mm, suspension: other, tire size: 195 / 50 R 13, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS PL 406 204 2700 2 + integrated loading ramps NEW VEHICLE Internal dimensions: 406cm x 204cm Side board height: 35cm Loading area height: 66cm Total weight: 2100Kg Payload: 2113Kg braked tandem trailer overrun brake and handbrake by KNOTT 2x 1350 Kg axle with brake and automatic reversing system low chassis fully welded, hot-dip galvanized steel frame integrated aluminum loading ramps in ramp compartment, 2.8T load capacity 35cm aluminum profile side boards with tensioning fastener foldable and removable on all sides 15mm thick, non-slip and robust screen-printed wood floor automatic jockey wheel with 400Kg support load Bsdpjzxxkisfx Aczsww 8 noise-reducing lashing eyes with 800Kg tensile force reinforced 13" C tire with steel valve M+S tires net/rope hook on the frame 13-pin connector LED marker lights at the front rear lamps with reversing light and triangular reflector OPTIONAL ACCESSORIES, PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side boards (price reduction) -rope winch AL-KO 12.5m -Black Edition (powder-coated side boards and rims in black) -steel plate on floor panel -complete LED lighting -theft protection -net, fine or coarse mesh -H-frame -leaf guard in various heights, also closed -extension side boards 30cm with tensioning fastener -flat cover with or without bow -high cover 180cm or 200cm further accessories on request! plus freight to Gera and vehicle registration certificate 200 € net Images are for illustrative purposes and may show optional accessories at an extra cost. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and available for immediate collection. The workshop is open on weekdays from 8:00 AM to 5:00 PM for all types of repairs. Specialist in axle repair, also for caravans. Large selection of rental trailers. In addition, we have a large selection of spare parts and accessories for trailers of all manufacturers. Get advice by phone, visit our website or come by directly.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-1, empty load weight: 617 kg, maximum load weight: 2,083 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,700 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 276 170 2700 2, rear tipper, electric operation NEW VEHICLE Internal dimensions: 276cm x 170cm Side panel height: 30cm Loading platform height: 65cm Total weight: 2700Kg Payload: 2083Kg Braked tandem trailer Overrun brake and handbrake by KNOTT 2x 1350Kg axle with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tensioning closure Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Additional steel plate on the wood floor Electric tipping operation 12V 95Ah AGM battery Plug + socket for charging the battery Automatic jockey wheel with 400Kg support load 6 noise-reducing lashing eyes with 800Kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pin connector LED side marker lights at the front Rear lights with reversing light and triangle reflectors Upper frame mounted on rubber Large tipping angle of 48 degrees backwards OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without side panels (price reduction) -Side panel height increased to 35cm -Black Edition (Powder-coated side panels and rims in black) -Integrated loading ramps 2800Kg -Battery charger -Remote control -Bluetooth remote control -Emergency hand pump -Safety support for maintenance work on tilted vehicle -Folding crank for rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf guard in various heights, also closed -Extension side panels 30cm with tensioning closure -Flat cover with or without bow -High cover 160cm or 180cm Further accessories available on request! Plus freight to Gera and vehicle registration document €200 net Images are for illustrative purposes only and may show optional accessories at an additional cost. Bwodpfxjzxrvxo Aczsw Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all types of repairs. Specialist in axle repair, also for caravans.

Condition: new, functionality: fully functional, machine/vehicle number: NEW-1, empty load weight: 685 kg, maximum load weight: 2,015 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 2,760 mm, loading space width: 1,700 mm, loading space height: 300 mm, trailer brake: trailer braked, Year of construction: 2026, SARIS K1 276 170 2700 2, Rear Tipper, Electric Operation + Integrated Aluminum Ramps NEW VEHICLE Internal dimensions: 276cm x 170cm Side panel height: 30cm Loading platform height: 65cm Total weight: 2700kg Payload: 2083kg Bjdpfx Acszxtgrszjww Braked tandem axle trailer Overrun brake and parking brake by KNOTT 2x 1350kg axles with brake Low chassis Fully welded, hot-dip galvanized steel frame Aluminum profile side panels with tension lock Can be folded down and removed on all sides 15mm thick, non-slip and robust screen-printed wood floor Additional steel plate on wood floor Electric tipping operation 12V 95Ah AGM battery Plug + socket for charging the battery Integrated aluminum ramps in ramp compartment, 2.8T load capacity Automatic jockey wheel with 400kg support load 6 noise-reducing lashing eyes with 800kg tensile force Reinforced 13" C tires with steel valve M+S tires Net/rope hooks on the frame 13-pole plug LED side marker lights at the front Rear lights with reversing light and triangular reflectors Upper frame mounted on rubber Large tipping angle of 48 degrees backwards OPTIONAL ACCESSORIES, PERMANENTLY REDUCED PRICE STARTING IN FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -Without side panels (price reduction) -Side panel height increased to 35cm -Black Edition (Powder-coated side panels and rims in black) -Integrated ramps 2800kg -Charger -Remote control -Bluetooth remote control -Emergency hand pump -Safety support for maintenance work on a tipped vehicle -Folding crank rear supports -Complete LED lighting -Anti-theft device -Net with fine or coarse mesh -H-frame -Leaf grid in various heights, also closed -Extension side panels 30cm with tension lock -Flat tarpaulin with or without bow -High tarpaulin 160cm or 180cm Further accessories available upon request! Plus freight to Gera and vehicle registration document €200 net. Images are for illustrative purposes and may show optional accessories at an additional cost. Have you not yet found the right trailer? We have 50-100 vehicles permanently in stock and available for immediate pick-up. The workshop is open on weekdays from 8:00 am to 5:00 pm for all types of repairs. Specialist in axle repairs, also for caravan trailers.

Condition: used, Year of construction: 2026, New demonstration machine! List price €21,690 net. High-performance dust extraction unit for extracting dust from machining centers, suitable for installation in the work area outside of potentially explosive zones. Key design features: - Galvanized steel sheet construction - Space-saving due to its compact design - Delivered in operational condition - ATEX - Impact resistance tested (FSA) - Low energy consumption with high performance thanks to a high-performance fan arranged on the clean air side with a special impeller - Energy-saving motor of efficiency class IE3 - 3 large-volume collection containers with liner bags - Collection volume 495 liters - High operational safety and long service life thanks to BGIA-tested filter hoses - Compressed air pulse cleaning ("Jet" cleaning) with time-dependent control for regenerating the filter surface - Alpha control with automatic start function (slide valve control available at extra cost) - Connection cable, 5 m long, with plug - Automatic fire suppression system with special extinguishing agent container (no connection to the water supply required) - The extinguishing agent, ABC powder, is not suitable for fires involving metals as well as cooking fats and oils - Check valve, type-tested - Design according to DIN EN 16770 - Residual dust content in the exhaust air below 0.1 mg/m3 - Passed GS-HO-14 "GS - H3" test - A T T E N T I O N ! - The compressed air pipe from the compressed air tank, a pressure regulator, a maintenance unit, a filter and a water separator are not included in the scope of delivery. These parts must be connected on-site. - The pressure regulator must be mounted directly in front of the compressed air tank in the supply line. The compressed air must be absolutely dry, dust-free and oil-free. - N O T I C E ! - Uniform filling of the collection containers cannot be guaranteed due to process-related reasons. Suction nozzle arrangement: Left Nominal volume flow *) : 3535 m3/h Maximum volume flow: 5500 m3/h Negative pressure at the interface *): - At nominal volume flow: 2950 Pa - At maximum volume flow: 2200 Pa Filter area: 20.5 m2 Suction nozzle: 250 mm Nozzle height, approx.: 968 mm, center Motor - Fan: 5.50 kW, 3x400 V, 50 Hz Fuse: 32 A (on-site) Compressed air connection: 1/2 " (on-site) Operating pressure: 4.5 bar Compressed air consumption: approx. 45 Nl, per compressed air pulse with an impulse time of: 60 ms Sound pressure level: 73.0 dB(A) Weight, approx.: 760 kg Dimensions, L x W x H: 2750 x 1030 x 2500 mm *) Mandatory information according to GS-HO-07 at 20 m/s and with the filter hoses under load (beech test dust). In the delivery condition and under practical conditions with coarser dust, the suction power is significantly higher. Scope of delivery: - Filter hoses, externally pressurized, permeability < 0.5 % (BGIA) - Energy-saving motor of efficiency class IE3 - 3 large-volume mobile collection containers - Mitsubishi-Alpha control with automatic start function (6 I-coils can be connected) and runtime addition - Input for external shutdown signal (limit switch, etc.) Bodpfx Acezxtz Nezsww - Jet cleaning with time-dependent control - Type-tested check valve - Automatic fire suppression system (with special extinguishing agent) "GS-wood dust tested - H 3" Optional equipment: Control on the operator side IE5 efficiency power pack Up to 25% efficiency advantage with the optional IE5 efficiency power pack. Vacumobile with IE5 synchronous motors reduces your electricity consumption an

Year of construction: 2026, condition: new, functionality: fully functional, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 XL is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 XL depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - Steel welding frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 520 x 480mm - Automatic cutter length processing Bwsdpfx Asvuw R Rsczew - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - ESD powder coating, RAL 9002, disc and sliding doors Optionally a vacuum cleaner unit can be offered later.