Used Power Factor Correction for sale (40,867)

Condition: used, Year of construction: 2007, operating hours: 66,031 h, functionality: fully functional, type of input current: three-phase, power: 800 kW (1,087.70 HP), input voltage: 400 V, type of cooling: water, input frequency: 50 Hz, input current: 80 A, MWM / Deutz TCG 2016 V16 CHP Unit – Approx. 800 kWe – Natural Gas For sale: complete MWM / Deutz TCG 2016 V16 CHP unit, year 2007, suitable for operation on natural gas. The unit has approximately 66,031 operating hours. The last major service was performed at approximately 48,000 operating hours. Tedpfoz E A Rwsx Airsd The CHP unit will only be sold after the engine overhaul has been completed. Work included before delivery Prior to delivery, the following work will be carried out: - Complete overhaul of the MWM TCG 2016 V16 engine - Overhaul of the electric pumps - Cleaning of the exhaust gas cooler - Cleaning of the condenser The generator was tested while the unit was still in operation and was found to be in good working order. The unit is currently disconnected from the gas supply. The oil and cooling water have been drained in preparation for the overhaul, so the engine and complete CHP unit can no longer be demonstrated running in its current condition. Main specifications - Manufacturer: MWM / Deutz - Model: TCG 2016 V16 - Year: 2007 - Fuel: Natural gas - Electrical output: approx. 800 kWe - Generator: Marelli - Generator rating: 1,300 kVA - Grid frequency: 50 Hz - Control system: TEM Evolution - Operating hours: approx. 66,031 h - Last major service: approx. 48,000 h Scope of supply The unit is offered as a complete CHP package and includes: - MWM / Deutz TCG 2016 V16 gas engine - Marelli generator - TEM Evolution control system - Gas train - Generator switchgear - Heat recovery equipment - Exhaust gas cooler - Condenser - Associated installation components supplied with the unit The unit is suitable for grid-parallel operation and can also be prepared for island / stand-alone operation if required. Complete service and technical documentation A complete maintenance history is available, including: - Full service logbook - Maintenance records - Oil sample reports - Electrical schematics - P&ID drawings - Technical and maintenance documentation Technical performance data for this engine type is also available, including information on electrical efficiency, gas consumption, thermal output, and total CHP efficiency. Installation and commissioning available In addition to supplying the CHP unit, CHP Solutions can also provide installation and commissioning on site. Depending on the project requirements, we can offer support with: - Positioning and installation of the CHP unit - Mechanical installation - Electrical installation - Gas connection - Cooling and heat-recovery connections - Grid connection - Start-up - Commissioning - Preparation for grid-parallel or island operation This means the CHP can be supplied not only as a unit, but also as part of a complete installed and commissioned energy solution. The unit is located in the Netherlands and can be inspected by appointment. For further technical information, documentation, photos, installation options, or a complete project quotation, please contact CHP Solutions.

Year of construction: 2021, condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Westtech Woodcracker CS610 compact grapple saw / incl. Power-Tiltator / Year of manufacture: 2021 / in stock & immediately available / good condition Todpfx Aijz Nuxierjd Price: €31,990.00 net / €38,068.10 gross - Cutting diameter: 610 mm - Grapple opening width: 1,280 mm - Weight (basic - fully equipped): 830 - 1,060 kg - Recommended flow rate: 65 - 110 l/min - Recommended flow rate for auxiliary function: 40 - 60 l/min - Recommended operating pressure: 230 - 280 bar - Service weight of carrier vehicle: 15 - 20 t - Saw head: actively sprung - Chain lubrication: grease Equipment: - incl. Power-Tiltator We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. In our warehouse, we have a very large selection of various Westtech products that are immediately available! Mr. Herden (Tel. [phone number]) will be happy to assist you. Upon request, we will also gladly provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker range for you! Errors and prior sale excepted! Internal No.: 421020 = Further information = New: No Part suitable for: Application forestry Please contact Marius Herden for further information.

Condition: used, Year of construction: 2021, Plasma cutting machine for pipes and profiles Plasma cutting machine for cutting pipes and profiles. The cutting contour is defined and create by the software. The created CNC code can send to the machine via USB or network. The program can be easily choose via the 12"touch display. The automatic cutting process is started after manual insertion of the workpiece. - Tube length: max. 6000mm - for round tube up to OD = 150mm max - for square tube up to 101.6x101.6mm (4 "x4") max - maximum pipe weight 100KG per load - 4-jaw chuck Tedpfx Aisz Nia Uered - 1x automatic raw support - fully automatic cutting process - PC control with 12 "touch display - Data import via USB and network - Power consumption: 400V 3P 2KW - weight: 800KG Made in Germany The pictures show you an older machine

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, overall weight: 1,09,000 kg, input voltage: 1,10,000 V, input frequency: 50 Hz, warranty duration: 24 months, nominal power (apparent): 1,00,000 kVA, nominal power: 1,00,000 kW (1,35,962.00 HP), secondary voltage: 33 V, temperature: 70 °C, empty load weight: 1,09,000 kg, input current: 530 A, type of output current: three-phase, output voltage: 33,000 V, Equipment: documentation/manual, type plate available, 110/33 kV transformer with 80 MVA capacity without forced air cooling and 100 MVA with forced air cooling, cooling type ONAF. Switching method: YNyn0+d. Todpfx Aisz Iycverjd The transformer was intended for connecting a wind farm and a battery storage system, neither of which is currently being implemented. Therefore, the transformer is being offered at a price significantly below the purchase price. The transformer will be inspected and accepted on October 23rd/24th, 2026, in Ljubljana, Slovenia, at the manufacturer Kolektor ETRA’s testing facility.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: Power Line 300 T2, For sale: a high-quality, continuous/throughput industrial washing system manufactured by the German company LPW Reinigungssysteme GmbH, model Power Line 300 T2. The machine was built in 2018 and is complemented by an original MAHLE Filtersysteme extension/expansion from 2019. Tsdsz Atinopfx Airsd

Year of construction: 2009, condition: ready for operation (used), Connected load: 18kW, was overhauled in 2017, an inspection is possible. Tedpfen Htktox Airod

Condition: ready for operation (used), Year of construction: 2016, Fuel: natural gas (NG), engine: HMG, space heating unit with CHP: yes, condensing boiler: no, additional heating unit: no, low-temperature boiler: no, B11 boiler: no, combi unit: no. Rated heat input P: 88kW, annual efficiency of the space heating system η: 136%, energy efficiency class: A++, usable heat output at rated heat input with additional heater switched off/on: 87.9kW, thermal efficiency at rated heat input with additional heater switched off/on: 57.5%, electrical efficiency at the heat output of the space heating unit with CHP with additional heater switched off/on: 33.5%, auxiliary power consumption at full load/part load el: 1.132kW, in standby mode P SB: 0.06kW, standby heat loss P stby: 0.442kW, annual energy consumption Q HE: 1345kWh, sound power level indoors L WA: 72dB, operating hours: 42,892h. Water was detected in the oil circuit, the unit has an oil-related fault despite sufficient oil being present, and it also shuts down with the message 'engine too hot'. The control unit was overhauled by the manufacturer in 2024, and regular maintenance intervals for oil changes, spark plugs, valves, etc. have been carried out. With documentation. Tjdpfx Ajxc Ni Roirjd

Condition: ready for operation (used), Year of construction: 2012, Heating output: 275kW, electrical output: 201kW, fuel: natural gas, engine: MTU E 3066 L3, engine cylinders: 6, overall efficiency: approx. 82%, generator rating: 276kVA, machine dimensions X/Y/Z: approx. 3550mm/1800mm/2100mm, weight: approx. 4500kg, operating hours: approx. 57557h. Documentation available. An on-site inspection is possible. Todpfx Aezk I U Ujired

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, programmable AC power source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Tjdsdz Srbopfx Aired Input values: Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies > 500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (Printer) - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Footprint H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition 2 units available, price per unit

Condition: used, Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump Tedpfx Aed S Nmieired -Manufacturer: Sauter HA 1401 86 38 192 -Hydraulic unit: for power chucks -Drive: 0.75 kW 1410 rpm -Volume flow: approx. 11 l/min -Dimensions: 510/300/H750 mm -Weight: 80 kg

Condition: used, Cable reel, cable reel, power cable reel, cable reel, workshop reel, cable reel, wall cable reel, workshop cable reel, wall reel -DR Italia: power cable reel -with cable: 7G 1.0 length: 13 m -Dimensions: 340/400/H400 mm Tedped Tq Rvofx Airjd -Weight: 15.5 kg

Condition: used, 4-application chucks, wedge bar chucks, three-jaw chucks, three-jaw lathe chucks, power chucks, hydraulic chucks -Spare parts: for hydraulic power chucks different types Tjdsfpif Dopfx Aired -Chuck size: Ø 210 mm -Weight: 124.2 kg

Condition: excellent (used), Year of construction: 2015, REFORM M14 Hydro carrier with R2 rotary harrow Technical data: ENGINE: 4-stroke gasoline engine: 21 hp Briggs & Stratton, 2-cylinder, 4-stroke gasoline engine DRIVE: hydrostatic, continuously variable drive, direction and speed adjustable electro-hydraulically via rocker switches on the steering handle with integrated, continuously adjustable creep speed control. SPEED: Forward 0 - 9.0 km/h, Reverse 0 - 4.0 km/h AXLE: continuously adjustable in length (120 mm) for center of gravity adjustment or to reduce load on the implement STEERING: finely adjustable hydraulic steering, operated via 2 steering levers on the left and right of the handle. Hydraulic differential lock effect when driving straight. IMPLEMENT ATTACHMENT: self-centering quick-release coupling PTO SHAFT: drive-independent front PTO shaft, 874 rpm at 3400 rpm engine speed, clockwise rotation EQUIPMENT: elastically mounted, height- and side-adjustable steering handle, emergency stop lever on the left on the steering handle grip WEIGHT: 220 kg Todpfx Aeizi Najired Tires: 23x8.50-12AS Terra low-pressure wide tires Attached implement: - R2 MTL-100 rotary harrow (unused) This REFORM M14 is in very good overall condition, has just been serviced, and is ready for immediate use! - The price is quoted excluding 19% VAT. - Inspection/test drive is possible at any time. - Shipping by freight forwarder: €220 - Financing/leasing can be arranged individually for you!

Condition: used, PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE23-0AA0 -Input: 3 AC 380 - 480 V 10.2 A 50/60 Hz -Output: 3 AC 7.7 A. Todpfx Aiefivi Uerjd -Power: 3 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 155/270/H235 mm -Weight: 4.6 kg

Condition: used, Power supply, converter, converter, power supply unit, Smart-UPS, spare battery -APC: Back-UPS HS 500 -Connection: 230 V/50-60 Hz -Active power: 300 W -Apparent power: 500 VA -Price: per piece -Number: 3 pieces -Dimensions: 375/225/H105 mm -Weight: 7.1 kg Tedjfkpigspfx Airod

Year of construction: 2012, condition: used, Power supply, converter, converter, power supply unit, Smart-UPS, spare battery, UPS system -Riello: Sentinel Dual UPS UPS system SDH 1000 -Connection: 220-240 V/50/60 Hz Todpfsfkq Uaex Aired -Power: 1000 VA/900 W -Dimensions: 425/170/H435 mm -Weight: 37.3 kg

Condition: used, Power converter, power supply, power supply, switching power supply, power supply module -Input: 3 x 360-520 V AC 50/60 Hz 2.40-1.70 A. -Output: 24 V 40 A DC -Price: per piece Tedpfefmgvajx Airsd -Number: 6 pieces -Dimensions: 140/160/H130 mm -Weight: 3 kg/piece

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ralakde high current resistor Todpfxegqg H He Airjd -Type: Test voltage 2.5 kV/34 Ohm/1.3-1,8 A -Number: 2x available -Price: per piece -Dimensions: 190/65/H85 mm -Weight: 0.4 kg

Condition: used, Power resistor, wire potentiometer, resistor, braking resistor, fixed pipe resistor, high-current resistor -Manufacturer: Ifo, 4 pieces EMF 50 6.8 ohms in series -Dimensions: 200/50/H110 mm -Weight: 0.4 kg Tjdpsgqg H Rsfx Airjd

Condition: ready for operation (used), Year of construction: 2010, 5 AXIS CNC WORKING CENTER BALESTRINI MOD. POWER 200 300 CE - USED Tedpfsk Uicgjx Airjd - Strokes: X-U 4000mm. Y 4000 mm. Z 700 mm. A 1000 ° C 400 ° (+/- 200 °) - N. 2 working tables 1400x3000 mm - N. 3+3 rails per each working table - N. 3+3 CSR supports per each table - Head type CS 44 (n. 4 motors 7.5 kW each) - Rpm 0/24000 g/min. with inverter - HSKC40/ER32 chuck - N. 2 inverters - Wooden waste aspiration/cleaning device - Becker vacuum pump 100 mc - Electrical panel air conditioner - Num Axium control - T-CAS software - Remote support - Communication PC/CN TCP/IP - Cabin + roof - CE rules - Year 2010 COMPLETELY RECONDITIONED

Condition: used, Power supply unit, built-in power supply unit -Type: (DIN 41752) G24 G5/25WRGD -System: SVS2 -Current input: DC 24V -Current output: DC +5V/25A DC +-15V/0.3A -Dimensions: 270/80/H220 mm -Weight: 2.5 kg Tjdpfx Asb H Rlheired

Condition: used, Power supply unit, DIN rail -Type: TSP 180-148 -Weight: 0.7 kg Tedpjb N E Hlofx Airsd

Condition: used, Power supply, control card, input card, control, edge banding machine, edge banding machine -Manufacturer: ELCO Todpfx Ajcpnl Njirsd -Type: HMC-1B 5V10A -Number: 1x control cards available -Price: per piece -Dimensions: 250/135/H60 mm -Weight: 1.3 kg

Condition: ready for operation (used), Fanuc A06B-6087-H130 Power Supply Module Version G SN:V01519990, the rear connection cover is missing, see photo, used, normal signs of use, 100% functional, scope of delivery as per photos Tedpfx Ast Nbzreirjd

Condition: new, Vehicle Charging Computer VAS 5908 Battery Charger Charging computer for vehicle starter batteries (lead-acid, gel, AGM, fleece batteries) VAS 5908 battery charger / external power supply with MPC4 control board and nominal 14VDC charging voltage (suitable for 12VDC vehicle electrical systems / batteries) - 100% compatible with vehicle electrical systems, protects vehicle electronics / airbag - Can be used as a charger, external power supply, and for supplying power to the vehicle in buffer mode (support during diagnostics / programming) - Extensive protection and self-protection functions Todpov Hptzjfx Airjd - Short-circuit and reverse polarity protection - Protection function in case of battery defects - Safe spark suppression - User-friendly menu navigation / charging parameters can be configured - Built-in communication interface - Sealed housing, protected against internal contamination Housing version 'B': advantageous for industrial production lines - Status display via display and high-power LEDs - Menu navigation: German, English, French, Italian, Spanish - Extensive accessories, e.g. external status indicator (DBL-SIG-LR remote indicator), power / charging cable, wall mounting device, etc. - Option: Customer-specific charging parameters - Option: Low-temperature operation down to -40°C - Option: Battery diagnostic system - Option: Regeneration charging for deeply discharged batteries - Electrical safety - certifications: EN60335, EN60950, UL60950-1, UL1236, CSA C22.2 No.60950-1-07 Used by leading automotive manufacturers Input voltage 100-240VAC wide range (tolerance: 85VAC-265VAC), 45-65Hz 130-350VDC; CAUTION: For use in combination with inductive power transfer, use special firmware! Inrush current / 30A at 264VAC, temperature-independent Automatic fuse: 16A slow-blow (e.g. characteristic B) Power consumption at full load / 0.98 - No-load power consumption / 10W, disabled at the output - Input fuse / F1 (2x 7A-8A T)/250V (6.3x32mm) - Transient overvoltage protection / Varistor (8kA / 151J) - Input connection / IEC/EN 60320, C14 - Weight: 8.2 kg You can find more new and used items in our shop! International shipping costs on request!