Used Printed Circuit Board Assembly for sale (17,666)

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 1,860 mm, total length: 2,800 mm, total height: 910 mm, overall weight: 300 kg, warranty duration: 12 months, Glass processing / assembly table. Dimensions 280 cm x 186 cm. Table lifted by gas springs. Covered with glass felt. Table on wheels - mobile. We recommend our other products for the glass industry. Lasdpfxegk Ay Hs Aaboh

Condition: new, power: 330 kW (448.67 HP), overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, STANDARD SPECIFICATION * Day Cab * Adaptive Cruise Control with FCW and AEBS-3 * Lane Change Warning System * Goodyear * RR, not applicable * Emission standard Euro 6 * Automated gearbox, TraXon, 12 speeds * Standard component layout * Fuel tank on the left * DAF Connect * Warranty Plus Driveline – 3 years / 300,000 km Options * Exterior sun visor * LED headlights, cornering and fog lights * Central locking, 3 keys, 2 remote controls * Lower cab step in Crystal White * Steering wheel with silver accents * Door trim: loosely woven fabric * Driver’s seat: Luxury Air * Armrests on both sides of driver’s seat * Passenger seat: Cinema and table, fabric cover * Dashboard table * Cool box or refrigerator * Automatic cab climate control * Auxiliary heater with heat pump and timer * Electric roof hatch * Accessory power supply: Standard + 2x 40 A * ECAS remote with extended features * Preparation for toll system * Digital tachograph, VDO 1C, Version G2V2 * Speed limiter setting: 90 km/h * DAF Infotainment Luxury Plus, luxury speakers * Antennas: DAB radio prep., 2x mobile, GNSS extra, CB * Wireless charger * Reversing warning system * Front axle: 8.00 t, air suspension, 161 N * Air suspension front: Medium * F1,315/70R22.5 GO KMAXS2 156/150 L Steering CBB * R1,315/70R22.5 GO KMAXD2 154/150 L Traction CBA * R2,315/70R22.5 GO KMAXS2 156/150 L Steering CBB * MX-11 engine, 330 kW/449 hp, cab badge: 450 * 12-speed TraXon gearbox 12TX2210 DD, 16.69-1.00 ratio * Rear axle ratio 2.47 * Mechanical differential lock * MX engine brake * Parking brake assistant * Wheelbase 4.60 m / rear overhang 2.55 m * Longitudinal beams 260/7.0 mm, continuous inner reinforcement * 545-litre aluminium fuel tank left, height 620 mm * Application with drawbar, type plate, up to max. GVW * Crossmember D137 + Rockinger coupling D130 * Pneumatic trailer coupling, rotary coupling * Electrical connection for trailer, 24 V / 15-pin * Hard-wired body builder signals and warnings * Side marker lights * Body mounting method BAM 1, console type B * Tail lift application * Fixed steering right, no first right * Alternator 130 A, batteries 2 x 210 Ah AGM * Battery energy monitoring Body: ZIKUN Swing-Board I body Technical data: Through-loading length: 7,250 mm Load length: 7,400 mm Through-loading width: 2,480 mm Rear portal: Loading width inside: 2,480 mm External width: 2,550 mm Through-loading height inside: 2,150 mm Loading height: approx. 1,199 mm Overall height: approx. 3,549 mm Substructure: robust lightweight construction ZIKUN folding swing mechanism Fixed roof powder-coated RAL 9010 Pure White Collision protection: welded steel impact bar on both sides as bumper protection. --PVC mudguards on rear axle --Holder for wheel chock + 2 chocks --Red position lamps above tail lift --Contour marking: side in white, rear in red The entire body sandblasted, primed, and painted in single colour or powder-coated. Subframe and body: DAF E1980 WHITE Integrated load securing with CRS system (4 rows) in roof and floor, incl. 4 locking bars with 6 horizontal spring-telescopic rods (CRS system Ancra-Jungfalk, Dekra certified according to VDI 2700 Code XL). Sliding access step Pallet impact edge left and right Interior lighting as LED spotlights mounted at the rear upper area, with connection at cab switch. Additional interior lighting as LED spotlights mounted at rear. Front wall/impact protection plate made from aluminium profile Front wall, lower area: Lasdpstv T Avsfx Aabjh

Condition: new, Year of construction: 2025, New assembly table with adjustable support bars COMALL JOB 15/3000 Technical specifications: - Contact surfaces in semi-rigid gray PVC - Loading: 180 Kg Laodpfxjgiud Rs Aabeh - Four length wise sliding supporting bars, clamping system through handle - Pneumatic system with two pneumatic connections - Hardware boxes, 6 pcs. - Extensible support, equipped with two longitudinal sliding bars

Condition: new, messurements (LxWxH): 2480 x 1230 x 65 bis 105width: 1230length: 2480weight approx.: 675 Lasdpfofk Ah Nsx Aaboh Welding and assembly tables of the SMT flex series are robust, height-adjustable and everyday workstations for processing weighty workpieces, handling electrical tools or chemical or oily substances. The tables can be easily moved using a lifting truck using transport rods in the baseboards and the height can be easily adapted to other working levels. The height adjustment covers a range from 650 mm to 1,050 mm (lower working heights on request). The up to 20 mm thick full steel worktop can also withstand violent impacts or blows, such as those that often occur when working with heavy hand tools or when handling very heavy metal workpieces or tools, without sustained deformations or notches. The metallic worktop allows the unrestricted use of magnetic clamps for fixing components. Due to its high weight, this universal table also ensures good safety against tipping over when heavy objects or tools are placed even in its highest working position. For more information, please follow this link:

Condition: excellent (used), Complete board sizing line consisting of roller conveyors, destacking device, transport table, Haist saw, Weinig Hydromat 22 AL four-sided planer with tooling, and a stacker. Ljdowz Id Topfx Aabjah

Condition: used, functionality: fully functional, Julabo RD Keypad and Presto Chiller Digital Controller and board. Lajdpfx Ajt Dag Njaboh Good working condition. Please check out our other listings as well.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 450 kg, warranty duration: 12 months, Glass processing / assembly table. Dimensions 340 cm x 240 cm. Table lifted by gas springs. Covered with glass felt. Table on wheels - mobile. We recommend our other products for the glass industry. Ledpegk A Ekjfx Aaboah

Condition: new, power: 270 kW (367.10 HP), overall weight: 18,000 kg, fuel type: diesel, color: white, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, STANDARD SPECIFICATION * Day cab * Mechanically suspended cab * Passenger seat: cinema style with fabric upholstery * Adaptive Cruise Control with FCW and AEBS-3 * Lane departure warning system * Goodyear * Emission class Euro 6 * Automated transmission, TraXon, 12-speed * Standard component layout * Fuel tank on the left * PACCAR Connect * Warranty Plus drivetrain – 3 years/500,000 km Options * LED headlights, cornering and fog lights * Windshield with sun protection film * Central locking, 3 keys, 2 remote controls * Adjustable roof spoiler for day cab * Mirror housings black * Cab color roof spoiler * Headlight bezel color: cab color * Bumper color: cab color * Steering wheel with silver accents * Door trim: loosely woven fabric * Driver’s seat: Luxury Air * Driver’s seat armrest * Dashboard table * Cool box or refrigerator * Automatic cab climate control * Auxiliary heater with heat pump and timer * Electric roof hatch * ECAS remote control with extended functions * Toll pre-installation * Digital tachograph, VDO 1C, version G2V2 * Speed limiter setting 90 km/h * DAF Infotainment Luxury Plus, Luxury speakers * Wireless charging device * Reversing warning system * Front: 8.00 t, air suspension, 161 N * Air suspension front: medium * F1, 315/70R22.5 GO KMAXS2 156/150 L Steering CBB * R1, 315/70R22.5 GO KMAXD2 154/150 L Traction CBA * MX-11 engine, 270 kW/367 hp, cab badge: 370 * 12-speed TraXon gearbox 12TX2010 DD, 16.69-1.00 * Rear axle ratio 2.47 * Mechanical differential lock * MX engine brake * Park brake assistant * Wheelbase 5.10 m / rear overhang 2.75 m * Longitudinal frame member 260/7.0 mm, continuous internal reinforcement * Application with drawbar, nameplate, up to max. GVW * Cross member D137 + Rockinger coupling D130 * Pneumatic connection for trailer, swivel coupling * Electrical connection for trailer, 24 V/15-pin * Tail lift compatibility Body: ZIKUN Swing-Board I superstructure Loading-through length: 6,650 mm Loading length: 6,800 mm Inner portal: 2,480 mm Internal loading width: 2,480 mm External width: 2,550 mm Internal loading height: 2,100 mm Loading height: approx. 1,177 mm Total height unladen: approx. 3,479 mm Subframe: robust lightweight construction from pressed steel sheets Bulkhead: made of special automotive plastic panels, fully closed to the roof, with a center reinforcement, smoothly fitted. Side walls: ZIKUN folding/swivel mechanism. Roof: fixed roof, consisting of steel hoops with permanently bonded aluminum sheets. Powder-coated in RAL 9010 Pure White Impact protection: welded steel bump strips on both sides for impact protection. PVC mudguards on rear axle 1 set of mudflaps for same Bracket for wheel chock + 2 chocks Red position lights above tail lift Side contour marking in white, rear in red Anti-spray mats on rear mudguards 1.11 Paintwork: Complete bodywork sandblasted, primed, and coated in a single color or powder-coated. Subframe and body: DAF W9815WHTE Integrated load securing with CRS system (4 rows) in roof and floor, incl. 4 barrier beams with 6 horizontal spring telescopic rods (CRS system Ancra-Jungfalk, Dekra-certified according to VDI 2700 Code XL) Sliding entrance step per side, 2 sliding steps integrated into lower folding wall on left and right, approx. 600 mm long. Pallet impact edge left and right Interior lighting as LED spotlight Ljdpfjr Sn Nnox Aabsah Mounted at the top rear, with connection in cab - switch Additional interior lighting

Condition: excellent (used), Epson G10-854SR Robot Assembly Station Dispensing Station The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 Assembly Area KK+SW, and 3.3 Assembly Area Front. (KK = heatsink, SW = front wall bracket) St.3.1: Dispensing Area - A workpiece carrier (WT) with mounted chassis and circuit boards is conveyed via the transfer belt into the dispensing area. - The WT is stopped at the lift-positioning unit (HuPo), raised off the belt, and secured in place - The X-Y-Z handling system moves the dispensing head to the designated position and initiates the dispensing process. - Once dosing is completed successfully, the handling system moves to the home position and the WT is placed back onto the conveyor - Transfer continues into the assembly area KK+SW (prerequisite: no WT in placement position) St.3.2: Assembly Area KK+SW - A WT transported from the dispensing area enters the KK+SW assembly area via the transfer belt. Ljdpfx Aasibx S Nebsah - It is stopped at the lift-positioning unit (HuPo), raised from the conveyor, and fixed in place; during this, the chassis side panels of the partially assembled component are aligned - Simultaneously, the positioning of the KK and SW tray is carried out - Both a KK tray stack (12) and a SW tray stack (12) are manually placed onto each respective infeed conveyor outside of the safety enclosure - The two safety shutters are opened and the loaded tray stacks are conveyed into the gripping position of their respective stackers - The safety shutters are then closed - The respective grippers pick up the corresponding tray - Using the Z-axis, trays are singled and transported upwards (above the actual pick-up height) - To center and stabilize the trays, a centering support is positioned beneath each tray using the X-handling system. - Using the stacker Z-axis, each tray is placed onto its centering support - The trays are now ready for component pick-up - The SCARA robot with a multi-gripper picks up the KK from the tray and places it in an intermediate alignment position (to compensate for inaccuracies in the pick-up and establish a fixed gripping point for assembly) - The KK is scanned, picked up again, and if the scanner result is OK, installed onto the WT - Non-OK KKs are placed in a non-OK container - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position - The SW is picked up again and installed onto the WT - Continue with Assembly Area Front Technical Data Design: SCARA (4-axis robot) Payload: nominal 5 kg, maximum 10 kg Horizontal reach: 850 mm Vertical reach: Axis 3: 420 mm Rotational range: J4: +/- 360° Horizontal repeatability: +/- 0.025 mm Vertical repeatability: J3: +/- 0.01 mm Rotational repeatability: J4: +/- 0.005° Maximum work envelope: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum operating speed: J1,J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User cabling, electrical: 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-axis: Outer diameter: 25 mm Press-in force: 250 N Weight: 48 kg Control: EPSON RC180 Mounting type: Ceiling IP protection class: IP20 Power and signal cables: 3 m Additional assembly modules in other sizes – new and used – can be found in our shop! International shipping costs on request.

Condition: new, messurements (LxWxH): 1480 x 980 x 65 bis 105width: 980length: 1480weight approx.: 371 Welding and assembly tables of the SMT flex series are robust, height-adjustable and everyday workstations for processing weighty workpieces, handling electrical tools or chemical or oily substances. The tables can be easily moved using a lifting truck using transport rods in the baseboards and the height can be easily adapted to other working levels. The height adjustment covers a range from 650 mm to 1,050 mm (lower working heights on request). The up to 20 mm thick full steel worktop can also withstand violent impacts or blows, such as those that often occur when working with heavy hand tools or when handling very heavy metal workpieces or tools, without sustained deformations or notches. The metallic worktop allows the unrestricted use of magnetic clamps for fixing components. Due to its high weight, this universal table also ensures good safety against tipping over when heavy objects or tools are placed even in its highest working position. Laodpfx Aajfk Ah Rjbjh For more information, please follow this link:

Condition: excellent (used), Max. working width: 55 mm Laedpfxowrcwvj Aabeh Max. working height: 75 mm Min. working width: 24 mm Min. working height: 34 mm Length: 14 m Width: 4 m Very good condition.

Condition: used, Pappschere / Board Cutter Pappschere Karl Krause Hebelschneidemaschine PS 120 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Laodpfxst Drm Io Aabsh Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, messurements (LxWxH): 2480 x 1230 x 800width: 1230length: 2480weight approx.: 461 Welding and assembly tables of the SMT fix series are robust everyday workstations for the processing of weighty workpieces, the handling of electrically operated tools or chemical or oily substances. The up to 20 mm thick full steel worktop can also withstand violent impacts or shocks, such as often occur when working with heavy hand tools or when handling very heavy metallic workpieces, without sustained deformations or notches. The metallic worktop allows the unrestricted use of magnetic clamps for fixing components. Thanks to its high weight, this universally applicable table, despite its 800mm working height, ensures sufficient safety against tipping over, even when heavy objects or tools are placed on it. Table 3 below gives an overview of the available standard models. For more information, please follow this link: Lasdpfx Aajfk Ah Usbeh

Condition: used, machine/vehicle number: 19163, Pappschere - Board Cutter Krause blau Online-Video-Inspection by Skype-Video Lasdpfx Aash Axx Rebsh We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, messurements (LxWxH): 1980 x 1480 x 800width: 1480length: 1980weight approx.: 440 Welding and assembly tables of the SMT fix series are robust everyday workstations for the processing of weighty workpieces, the handling of electrically operated tools or chemical or oily substances. The up to 20 mm thick full steel worktop can also withstand violent impacts or shocks, such as often occur when working with heavy hand tools or when handling very heavy metallic workpieces, without sustained deformations or notches. The metallic worktop allows the unrestricted use of magnetic clamps for fixing components. Thanks to its high weight, this universally applicable table, despite its 800mm working height, ensures sufficient safety against tipping over, even when heavy objects or tools are placed on it. Table 3 below gives an overview of the available standard models. For more information, please follow this link: Laedpjgrz Thjfx Aabeh

Condition: used, machine/vehicle number: 24089, Pappschere / Board Cutter Krause PS 120 Serial-No. 24089 Ledpfotzc Rlsx Aabeah Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, messurements (LxWxH): 2980 x 1480 x 65 bis 105width: 1480length: 2980weight approx.: 840 Welding and assembly tables of the SMT flex series are robust, height-adjustable and everyday workstations for processing weighty workpieces, handling electrical tools or chemical or oily substances. The tables can be easily moved using a lifting truck using transport rods in the baseboards and the height can be easily adapted to other working levels. The height adjustment covers a range from 650 mm to 1,050 mm (lower working heights on request). The up to 20 mm thick full steel worktop can also withstand violent impacts or blows, such as those that often occur when working with heavy hand tools or when handling very heavy metal workpieces or tools, without sustained deformations or notches. The metallic worktop allows the unrestricted use of magnetic clamps for fixing components. Due to its high weight, this universal table also ensures good safety against tipping over when heavy objects or tools are placed even in its highest working position. Laodpfxofk Ah Is Aabsh For more information, please follow this link:

Condition: used, Pappschere - Board Cutter Wilhelm Leo'S Nachfolger 19030Serial-No. WLNS Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Laodpfxeh Axtle Aabsh On Stock Emskirchen / Nürnberg - Can be test

Condition: new, messurements (LxWxH): 2980 x 1480 x 800width: 1480length: 2980weight approx.: 640 Laodpfx Aaofk Ah Tsbsh Welding and assembly tables of the SMT fix series are robust everyday workstations for the processing of weighty workpieces, the handling of electrically operated tools or chemical or oily substances. The up to 20 mm thick full steel worktop can also withstand violent impacts or shocks, such as often occur when working with heavy hand tools or when handling very heavy metallic workpieces, without sustained deformations or notches. The metallic worktop allows the unrestricted use of magnetic clamps for fixing components. Thanks to its high weight, this universally applicable table, despite its 800mm working height, ensures sufficient safety against tipping over, even when heavy objects or tools are placed on it. Table 3 below gives an overview of the available standard models. For more information, please follow this link:

Condition: used, machine/vehicle number: 13147, Pappschere - Board Cutter Polar Mohr 110Serial-No. 244 Cutting length max. 1200mm Table width max. 720mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Laodpfx Aeh Axbboaboh Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, messurements (LxWxH): 1980 x 980 x 800width: 980length: 1980weight approx.: 305 Welding and assembly tables of the SMT fix series are robust everyday workstations for the processing of weighty workpieces, the handling of electrically operated tools or chemical or oily substances. The up to 20 mm thick full steel worktop can also withstand violent impacts or shocks, such as often occur when working with heavy hand tools or when handling very heavy metallic workpieces, without sustained deformations or notches. The metallic worktop allows the unrestricted use of magnetic clamps for fixing components. Thanks to its high weight, this universally applicable table, despite its 800mm working height, ensures sufficient safety against tipping over, even when heavy objects or tools are placed on it. Table 3 below gives an overview of the available standard models. Laedpfofk Aibjx Aabeh For more information, please follow this link:

Condition: used, Pappschere - Board Cutter Krause Typ 110 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Lsdpoh Ax N Tofx Aabsah

Condition: new, More technical data on request Lasdpfxsd Aca Ds Aaboh

Condition: new, messurements (LxWxH): 1480 x 980 x 800width: 980length: 1480weight approx.: 231 Welding and assembly tables of the SMT fix series are robust everyday workstations for the processing of weighty workpieces, the handling of electrically operated tools or chemical or oily substances. The up to 20 mm thick full steel worktop can also withstand violent impacts or shocks, such as often occur when working with heavy hand tools or when handling very heavy metallic workpieces, without sustained deformations or notches. The metallic worktop allows the unrestricted use of magnetic clamps for fixing components. Thanks to its high weight, this universally applicable table, despite its 800mm working height, ensures sufficient safety against tipping over, even when heavy objects or tools are placed on it. Table 3 below gives an overview of the available standard models. Lajdpofk Aiajfx Aabsh For more information, please follow this link:

Condition: new, messurements (LxWxH): 1980 x 1480 x 65 bis 105width: 1480length: 1980weight approx.: 575 Welding and assembly tables of the SMT flex series are robust, height-adjustable and everyday workstations for processing weighty workpieces, handling electrical tools or chemical or oily substances. The tables can be easily moved using a lifting truck using transport rods in the baseboards and the height can be easily adapted to other working levels. The height adjustment covers a range from 650 mm to 1,050 mm (lower working heights on request). The up to 20 mm thick full steel worktop can also withstand violent impacts or blows, such as those that often occur when working with heavy hand tools or when handling very heavy metal workpieces or tools, without sustained deformations or notches. The metallic worktop allows the unrestricted use of magnetic clamps for fixing components. Due to its high weight, this universal table also ensures good safety against tipping over when heavy objects or tools are placed even in its highest working position. Lasdogrz Tdopfx Aabsh For more information, please follow this link: