Used Printing for sale (5,748)

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, total height: 1,600 mm, total width: 1,600 mm, total length: 15,000 mm, overall weight: 6,440 kg, The equipment has been used very little, is almost like new, and has under 1,000 operating hours. Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 98 cm - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 280-700 gr/ sqm. - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. Other specifications: Kodewqcrqopfx Adwswt - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. - Remote control panel with cable for easy format adjustment. - Special turning plate to make it possible to glue other types of boxes such as CDs. - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, - Grinding unit - Correction section - Pre-finishing section; - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 15000 x 1600 x 1600 mm - Weight: 6440 kg

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, punching force: 300 t, overall weight: 18,000 kg, The equipment has been used very little,it is almost like new, and has under 1,000 operating hours. Max. sheet size: 1060×740mm Min. sheet size: 400×360mm Stock range: Paperboard157~2000gsm Kodpfx Aowhvq Isdwowt Corrugated board (E,B LUTE) Min. gripper edge: 4mm Max. die-cutting size: 1040×730mm Max. pressure: 250tons Max speed: 7500sph Rules height: 23.8mm Main motor capacity: 11kw Total power capacity: 23kw Dimensions (L×W×H): 6000×4200×2400mm Net weight: 18,000kg

Condition: good (used), Letterpress printing press, foot operated Kjdovac S Djpfx Adwewt Made in Germany Fully original machine. A brilliant looking exhibit to put in a company lobby. A manually added piston. Rollers Format of the pressure 35x24cm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Very good technical and visual condition. The machine in continuous operation – test and presentation possible. Availability: January 2025 Location: European Union     Machine imported, installed, and under service care by the official GMB distributor. Only one user.   The best-selling model of GMB's automatic laminator.   A renowned manufacturer specializing exclusively in laminating machines since 1985. Exporting to 150 countries, GMB holds a 40% share of the domestic Chinese market and international exports.   Automatic Pallet Feeder Front and side-lay margin control Touchscreen controller Large diameter chrome-plated calender Electromagnetic heating – rapid heating within 90 seconds Stable operating temperature Hydraulic pressure Pneumatic sheet separation unit Anti-curl bar Automatic high-capacity stacker – pallet-based output Kedpfxovkg H Tj Adwswt   MODEL: SWAFM-1050 Max Sheet Size: 1050 x 820 mm Min Sheet Size: 300 x 300 mm Laminating Speed: 65 m/min Paper Thickness: 105 – 500 g/m2 Gross Power: 35 kW Total Weight: ok. 3000 kg Dimensions (szer. x głęb. x wys.) ok. 5800 x 2200 x 1900 mm Pressure system: Hydraulic Max. pressure in hydraulic system: 8 MPa

Condition: like new (used), RR120 is a high-volume system for printing, coating, inspecting, and drying rolls. Its modular design offers flexibility for specific applications and needs Reel to Reel Handling System 7 Dispensing Channels (Tandem Pumps Kwedpfjya Hvqjx Adwst Bio-Jet, Front Line and Air Jet Dispensing Technologies Print up to 7 Lines Simultaneously Automated Dispense Tracking for Precision Line Placement Perform Multiple Applications on One System Adjustable Tension for Handling Backed/Unbacked Membranes Easy to Set up, Operate and Maintain Data Storage to Support Multiple Applications Many System Options Can be Upgraded after Purchase

Condition: new, Year of construction: 2022, functionality: fully functional, The price is for all together. Kedpfoxwnw Aox Adwewt Ideal for a new start on Screen Printing Art studio Artists The set contains: 1.SCREEN PRINTING CAROUSELL type X 4 TABLES, FULL AJUSTABLE 2. DRYIER: 3FACE POWER 3.FLASH AUTO: 3FACE POWER ALL ARE NEW , OUT OF THEIR BOXES.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, total length: 1,480 mm, total height: 2,040 mm, total width: 850 mm, overall weight: 360 kg, input voltage: 220 V, input current: 32 A, Mint condition XYZPrinting MfgPro230xS 3D printer from 2022. The device has hardly been used and is in excellent condition - perfect for anyone looking for a reliable and powerful 3D printer. Why the XYZPrinting MfgPro230xS? Outstanding print quality: With its precise printing technology and a resolution of up to 50 micrometers, the MfgPro230xS delivers impressive print results that meet the highest industrial standards. High printing speed: Save valuable time during production. The MfgPro230xS offers fast printing speed without compromising on quality. Large installation space: With a generous print volume of 230 x 230 x 230 mm, even larger projects are no problem. Ease of use: The simple operation and intuitive interface make this 3D printer easily accessible even for beginners. Reliability: Thanks to its robust design and high-quality components, the MfgPro230xS is extremely durable and reliable. Ksdpet H I Tvefx Adwewt With the XYZprinting MfgPro230 xS industrial 3D printing system, the most complex structures can be produced in one piece and without support structures using selective laser sintering in your workshop. Developed for professional use as well as for use at institutes and universities. Accessories: Sinterit FZ138 PHS Station Sinterit FZ101 ATEX Vacuum Cleaner 230V Sinterit Sandblaster SLS N2 Generator

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, number of ink cartridges: 4, color channels: 4, number of print heads: 1, resolution (max.): 1,600 dpi, paper weight (min.): 40 g/m², paper weight (max.): 400 g/m², paper width (min.): 1 mm, paper width (max.): 330 mm, paper height (min.): 300 mm, INKBAGS Printer The INKBAGS Printer is a high-performance industrial single-pass printer designed for precise, high-speed printing on various absorbent packaging materials. Equipped with an advanced Epson Micro Piezo Electrical printhead, it ensures exceptional print accuracy, sharp details, and consistent color quality across a wide range of substrates. Technical Specifications: Printhead: Epson Micro Piezo Electrical Print Width: up to 330 mm (13 inches) Print Length: up to 2000 mm (78.7 inches) Printer Dimensions: Width: 3.3 m (10.8 ft) Ksdpfxsxtu Exj Adwowt Length: 1.7 m (5.6 ft) Height: 1.6 m (5.25 ft) Ink System: The INKBAGS Printer uses a modern CISS (Continuous Ink Supply System), allowing for continuous, stable ink flow and cost-efficient operation without frequent cartridge changes. It supports both water-based and pigment inks, giving flexibility for different materials and application needs. Software Package: Each printer comes with dedicated proprietary software and a RIP system for precise color management and file preparation. This ensures seamless workflow from design to print and optimal output quality. Ideal Applications: The INKBAGS Printer is an ideal solution for businesses focused on eco-friendly and customized packaging production. It prints perfectly on: Paper and cotton bags Cardboard boxes and packaging Food packaging Pizza boxes Other absorbent (water-absorbent) materials Key Advantages: Industrial-grade single-pass printing with high speed and precision Reliable CISS ink system with low running costs Compatible with both water-based and pigment inks Built-in professional RIP and printer management software Perfect for custom packaging production and branding

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, The Massivit 5000 3D printer enables ultra-fast custom manufacturing for both the visual communication market and industrial sectors such as the automotive, aerospace, railway, and marine industries. Equipped with a dual-material system and two printheads, the M5000 allows you not only to print two different objects but also to print with two different materials simultaneously. The extraordinary build volume of 145 x 111 x 180 cm enables the production of full-scale parts in no time. Large, complex forms are no challenge for this machine. Kwodpfxjxwpvge Adwet Furthermore, a variety of materials is available for the machine.

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 181941, Air Delivery System: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 0.5°C Cooling Capacity: 2000W Temperature Sensor: shared output from integrated printer sensor (0 – 10V input over 0 – 50°C) Air In Filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant Gas: R134a 0.75Kg Full load current: 12.6A Start Up Current: 20A Kwedpfx Adjhg Rcxowjt Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Acoustic Noise: > 75dB Dimensions: 1300mm High (+ beacon), 510mm, 540mm Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 100Kg Documentation not included the TCM is a precision temperature control module designed to enhance the Print Process by providing a highly stable and accurately controlled air temperature within DEK's range of printers. The operating range of the TCM offers wide control of the process s temperature either side of factory ambient. As applications become more varied the requirement to produce high yield results can be aided by the ability to heat as well as cool from factory ambient. Adhesive printing for example benefits from a temperature in the 25-30°C range, which is generally higher than conditioned factory ambient. Conditioned air is fed from the TCM into the print area and returned via ducting located beneath the printer. Ducting design has been formed to achieve minimal airflow rates over the process area prolonging tack performance of solder pastes and increasing stencil life. Due to its optimised design and re-circulating system the TCM is energy efficient and requires minimal input power from a single-phase mains supply. Exhaust air is vented through the top of the TCM alleviating the need for any connection to factory extraction systems. The TCM will automatically shut down following a predetermined delay if the printer is powered down or covers are left open. To monitor process temperature the TCM utilises the output from the printers integrated Temperature Sensor located on the print carriage resulting in accurate feedback and control. To prevent process contamination conditioned air is passed through a filter before entering the printer. The possibility of process contamination is further reduced due to the TCM maintaining a higher air pressure within the printer compared to the surrounding environment thus limiting the ingress of airborne particulates. The Modules operating status is indicated by provision of a 'four colour' beacon clearly visible to line operators. Any condensate produced can be gravity piped to drain or collected in an easy to empty 5-litre container. Two sensors monitor condensate level and give a warning via the beacon when container requires emptying. The TCM will automatically shut down if the container is not emptied to prevent overflow. Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten /

Condition: excellent (used), Printing International Cristal 90X2 Kwedpfx Adov Iyh Sowot

Condition: used, Year of construction: 2010, functionality: fully functional, FOR SALE: Antec Legend 8/8 Screen Printing Press - The World's Finest Manual Machine! We are selling our Antec Legend 8/8 manual screen printing press. Widely recognized as the best manual machine available, the Legend offers an unparalleled combination of features: Extremely Lightweight: Makes operation smooth and less fatiguing. Precise Registration: Ensures high-quality, multi-color prints with perfect alignment. Fast and Efficient: Designed for rapid production without compromising accuracy. Incredibly Easy to Maintain: Simple design for hassle-free upkeep and longevity. True All Heads Down Capability: Allows for printing with multiple operators simultaneously, significantly increasing production speed. Included with the press is a Workhorse Flash Dryer with Stand-Off. This machine is ready to go and waiting for its new owner to start printing! Kwjdpfxswk E Ihs Adwst Contact us for more information and to arrange a viewing.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Kjdpfxovy Aipe Adwowt Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: used, functionality: unexamined, machine/vehicle number: Platinium GPC PDP Printer, Used IP Semi Automatic Pad Printing Installation / Pad Printer IP Printing International Semi Automatic Pad Printing Machine "Used for Pad Printing of PIA on son-tubes and shaped products" Manufacturer: IP Printing International Belgium Model: Slider 160 GPC+P 290 GPC Type: Platinium GPC PDP Printer Controller: Siemens Simatic Tough Panel Kjdpfx Aow H Naaedwowt Including pallet with tools and spare parts

Condition: excellent (used), Year of construction: 2004, Age: 2004 Max.Size: 74 x 53 cm (29 x 20 inch) Colors: 4 Impress.Count: 68 mio Description: Man-Roland 304 Year: 2004 Imp count: 68 mil Colours: 4/0 or 2/2 Autosize Quick action plate clamp No diagonal register Technotrans aplha.d 40L Available immediately In production Kwsdpjttvc Rsfx Adwet

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, 8-color drum-type flexographic printing machine • Year of manufacture: 2017 Kedpfx Asx Tkdgedwjwt • Country of origin: Turkey • Brand: Promatek • Maximum speed: 300 meters/minute • Doctor blade system • 12 anilox sleeves • 88 plate sleeves • Plate mounting machine included

Condition: used, functionality: fully functional, Offset printing press 52/72 with perfecting device Kjdjyapxbepfx Adwswt

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: GS000506, Counter: 26‘795‘055 // Speed: 13000 Sheets / h Kedpevw Ai Rjfx Adwjwt Format: Sheet format max. 370 x 520 mm // min.: 105 x 145 mm Print format max: 360 x 520 mm Thickness: max. 0,4 mm Dampening: Alcolor dampening systems with Baldwin BC 713 EF cooling device Powder device: Alphatronic 200 Equipment / further information Ultrasonic double sheet control Heidelberg EasyPlate plate clamping device with automatic plate cylinder positioning for quick plate changes with just one tool. Blanket cylinder with central clamping screw for tensioning at the front and rear edges Automatic blanket and impression cylinder washing device (for normal colors) suitable for conventional and vegetable oil-based washing agents, program-controlled via the control system.

Condition: good (used), functionality: fully functional, Heidelberg GTO 46 + NP Ksdpfx Aoyalwgedwswt

Condition: ready for operation (used), Year of construction: 1985, operating hours: 88 h, Heidelberg Speedmaster 102 FPP - 1985 year model - 88 millions impression Technical Specifications Color Capacity: 5 colors. Kjdpfx Adeyarblewjwt Perfecting Configuration: The "PP" designation indicates a double-perfecting capability, typically allowing for 5/0, 1/4, or 2/3 printing configurations (printing on both sides of the sheet in a single pass). Maximum Sheet Size: 720 x 1,020 mm (approx. 28 x 40 inches). Minimum Sheet Size: 280 x 420 mm (straight printing) or 400 x 420 mm (perfecting). Production Speed: Up to 13,000 sheets per hour. Alcolor Dampening: A continuous film dampening system for consistent ink-water balance. CPC 1.02: The Control Press Center for remote ink and register control. High Pile Delivery: Standard for high-volume commercial production. Powder sprayer Weko

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 5650S, ✅ Two built-in ovens. ✅ Frame screen – Well maintained and without damage. It is in very good condition, without damage and ready for immediate operation. Any inspection is welcome! VAT, shipping costs, as well as disassembly and removal from our premises, are the customer's responsibility. Kjdoxrdpkopfx Adwowt

Condition: excellent (used), FDI manual punch press, Fredrich GmbH . Very good condition. Kwodpeum H Edsfx Adwst

Condition: used, functionality: fully functional, With this offer, you are purchasing a used Konica Minolta SD-513 brochure finisher. Item for sale: 1 x Konica Minolta SD-513: Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test print can be seen in the photo. Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! Kwedpex D Ab Asfx Adwet For more information, please feel free to contact us personally.

Condition: excellent (used), For sale: a robust, double-station bookbinding/printing press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. This machine was previously operated by the public sector unit Stadt Fürth (Germany), which ensures it is complete and well-maintained. The device is equipped with two independent workstations, a heavy-duty upper beam, and pressure adjustment via lever arms. The lower housing contains the mechanical and electrical systems; power is supplied through a 16A CEE connector (400V). The machine is mounted on wheels for easy mobility. Application This press is suitable for bookbinding, printing, modeling, technical works, and any applications requiring even pressure over a larger area. Ideal for book blocks, covers, laminates, paper and cardboard elements, and other materials that require pressing or stabilization under pressure. Technical condition – Complete unit – All levers and mechanisms function correctly – 400V power supply, CEE 16A plug – Mobile design on wheels – Normal signs of use visible in photos Kwodpfxsxzu Rqo Adwet – Machine is ready for operation Manufacturer: Karl Tränklein K.G. Country of manufacture: Germany (Made in Germany)

Condition: used, Year of construction: 2002, Total counter: approx. 26.58 million impressions (see photo) RYOBI-matic film dampening system RYOBI Semi-PRC semi-automatic plate changer RYOBI PCS-J control console GRAFIX powder sprayer Max. paper size: 520 x 375 mm Min. paper size: 100 x 105 mm (with additional equipment) Printing speed: up to 11,000 sheets/h Paper thickness: 0.04 to 0.4 mm (up to 0.5 mm possible with narrow web) Kwjdpfx Adoyatc Dowst