Used Professional Gas Ranges for sale (23,166)

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Itjdez Ai Tpspfx Ahnel Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, Cylinders, bottles used for gas transport 20/40/50 L, 200/300 bar Itjdpfx Aeyfpg Nehnel T50 steel gas cylinder, bottle 50 L 200 bar 288 pieces T40 steel gas cylinder, bottle 40 L 200 bar 288 pieces T23 steel gas cylinder, bottle 20 L 300 bar 288 pieces All bottles are complete, empty and ready for export.

Year of construction: 2013, condition: used, Rational SCC 201G gas convection oven In excellent working condition Ijdpfx Ahozu T Dcenstl 20 GN 1/1

Condition: good (used), mileage: 1,77,998 km, power: 90 kW (122.37 HP), first registration: 11/2018, fuel type: diesel, wheelbase: 3,280 mm, fuel: diesel, fuel tank capacity: 70 l, color: silver, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 2, total length: 4,960 mm, total width: 1,920 mm, total height: 1,940 mm, permissible axle load (axle 1): 1,500 kg, permissible axle load (axle 2): 1,800 kg, Year of construction: 2018, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, full service history, navigation system, onboard computer, power assisted steering, power mirror, sliding door, soot filter, tire pressure monitoring, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Armrest - Audio controls on the steering wheel - Exterior mirrors with turn signal indicator - AUX input - Outside temperature display - Becker holder - DAB radio - Tachometer - Third brake light - Driver's seat height adjustment - Remote central locking - Tinted glass - Rear doors - Adjustable steering wheel - Adjustable front seats - Keyless Go - Foldable exterior mirrors - Air conditioning - Air conditioning, separate left and right - Comfort seats - 16-inch alloy wheels - Metallic paint - Center armrest - Multifunction steering wheel - Parking sensors - Rear parking sensors - Front parking sensors - Particulate filter - Radio/CD player - Disc brakes - Headlight level adjustment - Side doors - Voice control - Immobilizer - Bumpers in body color - Touchscreen - Partition = Further Information = General Information Number of doors: 6 Cabin: Single Technical Information Number of cylinders: 4 Engine displacement: 1,997 cc Maximum front axle load: 1500 kg Maximum rear axle load: 1800 kg Weights Unladen weight: 1,579 kg Payload: 1,521 kg GVWR (Gross Vehicle Weight): 3,100 kg Interior Upholstery: Leather Isdpfx Aeznxhmohnstl Maintenance, History and Condition Service booklets: Available (Dealer maintenance) APK (Periodic Technical Inspection): Valid until 11/2026 Technical condition: Good Optical condition: Good Financial Information Price: On request VAT/Margin scheme: VAT deductible = Company Information = Nidro cars Holland is located in the center of the country and is the right place to buy your car, van or truck. The stated price is the 'internet take-away price'. For questions or to arrange a test drive, please contact us: VIEW OUR ENTIRE INVENTORY AT All trade-ins are possible! (Our advertisements are compiled with great care, but no rights can be derived from the content).

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 4,724 h, load capacity: 4,000 kg, lifting height: 5,500 mm, free lift: 2,400 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,600 mm, gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,450 mm, total length: 2,300 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚜🔧 💼 Years of experience | In-house service & paint shop | Expert consultation | Pan-European transport | After-sales support Looking for a forklift you can rely on? 🤝 We are a reputable European dealer of new and used forklifts. From small businesses to international facilities – our machines ensure dependable and efficient logistics. ⚙️ 🌟 Why Choose FT Logistics ✅ Every forklift undergoes comprehensive technical servicing – inspection, testing, oil & filter changes, major component overhauls ✅ UDT certification available upon request ✅ In-house workshop & paint shop – forklifts reconditioned both visually and mechanically ✅ Own transport fleet across Europe 🚛 ✅ Operator training & on-site functional testing upon delivery ✅ After-sales technical support – we’re here for you even after the purchase ✅ Machine viewing & testing available at our headquarters ✅ Financing assistance via top leasing partners ✅ Invoice in EUR or PLN 💶 🔩 AVAILABLE MODEL: COMBILIFT C4000 – Four-way / Multidirectional Forklift / Multidrive System ✅ Year: 2002 ✅ Operating hours: 4,724 h ✅ Drive: GAS ⛽ ✅ Capacity: 4,000 kg ✅ Mast: Duplex – 4,500 mm ✅ Fork positioner: 1,380 mm | Forks: 1,200 mm ✅ Superelastic tyres – 100% ✅ Free lift: 2,400 mm ✅ Condition: Excellent – after major service Itodpfxoz Daxpj Ahnol ✅ Appearance: Clean, corrosion-free, ready for work 📏 Dimensions: Height: 2,450 mm | Length: 2,300 mm | Width: 2,250 mm | Positioner: 1,320 mm | Overall height: 3,600 mm 🚀 Ideal For: 🏭 Narrow aisle warehouses 🪵 Wood, steel & pipe sectors 📦 Handling long loads 🏗️ Indoor & outdoor operations FT Logistics – Quality you can count on. Service you can trust. 💙

Year of construction: 2013, condition: good (used), for 40 GN pans * Steam cooking mode from 30 °C to 130 °C * Regeneration * Convection / dry heat: temperature range between 30 °C and 300 °C, 0–100% maximum humidity. Itjdpfx Aezrk S Eshnsl * Probe * Automatic cleaning with tablets

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 2,245 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,380 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10½, rear tire type: cushion tires (black), rear tire size: 23 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, # 🚜 COMBILIFT CB3000 | LPG | 4900 MM | FORK POSITIONER | SIDE SHIFT | FULL CABIN | READY FOR WORK ✅ ## 🔧 FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY AVAILABLE If you are looking for a forklift that will generate value from day one instead of incurring maintenance costs, this machine is the perfect solution. We offer a modern and fully prepared COMBILIFT CB3000 multidirectional forklift, professionally serviced, thoroughly inspected, and ready for immediate operation in warehouses, production facilities, timber yards, steel service centers, and logistics environments. --- ## ⭐ Key Benefits ✅ Fully serviced prior to sale ✅ Start-up warranty included ✅ Excellent technical and cosmetic condition ✅ Low operating hours – only 2,245 h ✅ Ready for immediate operation with no additional investment required ✅ Live online demonstration available ✅ Direct delivery to your facility available Isdpfjzzwc Nox Ahnstl --- # 📋 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT 🚜 Model: CB3000 📅 Year of Manufacture: 2023 🔢 Serial Number: 73868 ⚖️ Capacity: 2,500 kg 📏 Load Center: 600 mm ⛽ Engine: Kubota LPG Gas ⚙️ Engine Power: 42 kW 🕒 Operating Hours: 2,245 h ⬆️ Lift Height: 4,900 mm 🏋️ Machine Weight: 6,300 kg --- # 📐 DIMENSIONS 📏 Overall Height: 2,250 mm 📏 Construction Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,550 mm 📏 Fork Positioner Width: 1,400 mm --- # 🔩 FORKS 📌 Fork Length: 1,200 mm 📌 Fork Section: 120 x 50 mm --- # 🛞 TIRES Front: 16 x 7 x 10½ Rear: 23 x 10 x 16 --- # 🛠️ EQUIPMENT ✅ Full enclosed cabin ✅ Heating system ✅ Radio ✅ Hydraulic fork positioner ✅ Side shift ✅ Working lights ✅ Kubota LPG engine ✅ Multidirectional steering system ✅ Operator comfort package --- # 🏭 IDEAL FOR 🌲 Timber and wood processing industry 🪑 Furniture manufacturers 🏗️ Steel mills and steel service centers 🔩 Aluminium and PVC profile handling 📦 Handling of long loads ↔️ Narrow aisle operations 🏢 Indoor and outdoor applications --- # 🤝 WHY CHOOSE FT LOGISTICS? When purchasing from FT LOGISTICS, you are working with a company specialized exclusively in: ✅ Sideloaders ✅ Multidirectional forklifts ✅ Long-load handling equipment ✅ Specialist material handling solutions Every machine undergoes a comprehensive technical inspection, full service, and operational testing before delivery. 🌍 With more than 100 machines available from stock, we supply customers throughout Europe, South America, Africa, Asia, and the Middle East. --- # 🚀 WE PROVIDE 🔧 Full service before delivery 🛡️ Warranty 👨‍🔧 Professional technical support 💰 Leasing and financing assistance 🚛 Transport organization 📄 Export documentation and customs support 🔩 After-sales service --- Hundreds of customers across Europe trust our equipment and continue to return for future purchases. 📹 We can arrange a live online demonstration. 📸 Additional photos and videos available upon request. 🚛 Customized transport quotation available for any destination worldwide. --- # FT LOGISTICS ### 🚜 We Deliver Machines Ready for Work.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 2,245 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,380 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10½, rear tire type: cushion tires (black), rear tire size: 23 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, # 🚜 COMBILIFT CB3000 | LPG | 4900 MM | FORK POSITIONER | SIDE SHIFT | FULL CABIN | READY FOR WORK ✅ ## 🔧 FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY AVAILABLE If you are looking for a forklift that will generate value from day one instead of incurring maintenance costs, this machine is the perfect solution. We offer a modern and fully prepared COMBILIFT CB3000 multidirectional forklift, professionally serviced, thoroughly inspected, and ready for immediate operation in warehouses, production facilities, timber yards, steel service centers, and logistics environments. --- ## ⭐ Key Benefits ✅ Fully serviced prior to sale ✅ Start-up warranty included ✅ Excellent technical and cosmetic condition ✅ Low operating hours – only 2,245 h ✅ Ready for immediate operation with no additional investment required ✅ Live online demonstration available ✅ Direct delivery to your facility available --- # 📋 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT 🚜 Model: CB3000 📅 Year of Manufacture: 2023 🔢 Serial Number: 73868 ⚖️ Capacity: 2,500 kg 📏 Load Center: 600 mm ⛽ Engine: Kubota LPG Gas ⚙️ Engine Power: 42 kW 🕒 Operating Hours: 2,245 h ⬆️ Lift Height: 4,900 mm 🏋️ Machine Weight: 6,300 kg --- # 📐 DIMENSIONS 📏 Overall Height: 2,250 mm 📏 Construction Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,550 mm 📏 Fork Positioner Width: 1,400 mm --- # 🔩 FORKS 📌 Fork Length: 1,200 mm 📌 Fork Section: 120 x 50 mm --- # 🛞 TIRES Front: 16 x 7 x 10½ Rear: 23 x 10 x 16 --- # 🛠️ EQUIPMENT ✅ Full enclosed cabin ✅ Heating system ✅ Radio ✅ Hydraulic fork positioner ✅ Side shift ✅ Working lights ✅ Kubota LPG engine ✅ Multidirectional steering system ✅ Operator comfort package --- # 🏭 IDEAL FOR 🌲 Timber and wood processing industry 🪑 Furniture manufacturers 🏗️ Steel mills and steel service centers 🔩 Aluminium and PVC profile handling 📦 Handling of long loads ↔️ Narrow aisle operations 🏢 Indoor and outdoor applications --- # 🤝 WHY CHOOSE FT LOGISTICS? When purchasing from FT LOGISTICS, you are working with a company specialized exclusively in: ✅ Sideloaders ✅ Multidirectional forklifts ✅ Long-load handling equipment ✅ Specialist material handling solutions Every machine undergoes a comprehensive technical inspection, full service, and operational testing before delivery. 🌍 With more than 100 machines available from stock, we supply customers throughout Europe, South America, Africa, Asia, and the Middle East. --- # 🚀 WE PROVIDE 🔧 Full service before delivery 🛡️ Warranty 👨‍🔧 Professional technical support 💰 Leasing and financing assistance 🚛 Transport organization 📄 Export documentation and customs support 🔩 After-sales service --- Hundreds of customers across Europe trust our equipment and continue to return for future purchases. 📹 We can arrange a live online demonstration. 📸 Additional photos and videos available upon request. 🚛 Customized transport quotation available for any destination worldwide. --- Itjdpozy Nw Asfx Ahnel # FT LOGISTICS ### 🚜 We Deliver Machines Ready for Work.

Condition: used, Year of construction: 2009, operating hours: 49,800 h, machine/vehicle number: GZN00767, fuel type: gas, motor manufacturer: Caterpillar G3520C, General information Field of application: Construction Weights Empty weight: 17.500 kg Functional Generator capacity: 2.150 kVA Dimensions of cargo space: 7 x 2 x 27 cm Other information Fuel consumption: 8895 Btu/ekW-hr Generator: Caterpillar SR4B Frequency: 50 Voltage: 400 Drill equipment: Control Panel Additional information Please contact Team DPX for more information = Additional options and accessories = Itedozpdn Uepfx Ahnol - Control Panel

Condition: used, Year of construction: 2009, operating hours: 49,800 h, machine/vehicle number: CAT0000LGZN00768, fuel type: gas, motor manufacturer: Caterpillar G3520C, General information Field of application: Construction Weights Empty weight: 17.500 kg Functional Generator capacity: 2.150 kVA Isdpfszpdn Isx Ahnotl Dimensions of cargo space: 7 x 2 x 27 cm Other information Fuel consumption: 8895 Btu/ekW-hr Generator: Caterpillar SR4B Frequency: 50 Voltage: 400 Drill equipment: Control Panel Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 2,039 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,380 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: TOYOTA 4Y, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10½, rear tire type: cushion tires (black), rear tire size: 23 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, 🚜 COMBILIFT CB2500 | LPG | 4900 MM | FORK POSITIONER | SIDE SHIFT | FULL CABIN | READY FOR WORK 🚜 ✅ FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY AVAILABLE Looking for a forklift that generates value from day one, rather than incurring maintenance costs? This COMBILIFT CB2500 is the perfect solution. Professionally serviced, thoroughly inspected, and ready for immediate operation, this multidirectional forklift is ideal for warehouses, production facilities, timber yards, steel service centers, and logistics operations. ## ⭐ KEY BENEFITS ✅ Fully serviced before sale ✅ Start-up warranty included ✅ Excellent technical and cosmetic condition ✅ Low operating hours – only 2,039 h ✅ Ready for immediate operation ✅ No additional investment required ✅ Live online demonstration available ✅ Direct delivery to your facility --- ## 📋 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT 🚜 Model: CB2500 📅 Year: 2022 ⚖️ Capacity: 2,500 kg 📏 Load Center: 600 mm ⛽ Engine: Kubota LPG Gas ⚙️ Engine Power: 42 kW 🕒 Operating Hours: 2,039 h ⬆️ Lift Height: 4,900 mm 🏋️ Machine Weight: 6,300 kg --- ## 📐 DIMENSIONS 📏 Overall Height: 2,250 mm 📏 Construction Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,550 mm 📏 Fork Positioner Width: 1,400 mm --- ## 🔩 FORKS 📌 Fork Length: 1,200 mm 📌 Fork Section: 120 x 50 mm --- ## 🛞 TIRES Front: 16 x 7 x 10½ Itjdpfx Aozxr Axjhnel Rear: 23 x 10 x 16 --- ## 🛠️ EQUIPMENT ✅ Full enclosed cabin 🔥 Heating system 📻 Radio ↔️ Hydraulic fork positioner ↔️ Side shift 💡 Working lights ⛽ LPG engine 🔄 Multidirectional steering system 👨‍🔧 Operator comfort package --- ## 🏭 IDEAL FOR 🌲 Timber & wood processing 🪑 Furniture manufacturing 🏗️ Steel mills & service centers 🔩 Aluminum & PVC profiles 📦 Long load handling ↔️ Narrow aisle operations 🏢 Indoor & outdoor applications --- ## 🤝 WHY CHOOSE FT LOGISTICS? FT LOGISTICS specializes exclusively in: ✅ Sideloaders ✅ Multidirectional forklifts ✅ Long-load handling equipment ✅ Specialist material handling solutions Every machine undergoes a complete technical inspection, servicing, and operational testing before delivery. 🌍 100+ machines available in stock 🚛 Deliveries throughout Europe, South America, Africa, Asia, and the Middle East. ### 🚀 WE PROVIDE 🔧 Full pre-delivery service 🛡️ Warranty 👨‍🔧 Professional technical support 💰 Leasing & financing assistance 🚛 Transport organization 📄 Export & customs documentation 🔩 After-sales service Hundreds of customers across Europe trust FT LOGISTICS and continue to return for future purchases. 📹 Live online demonstration available 📸 Additional photos & videos on request 🚛 Customized transport quotation worldwide ### FT LOGISTICS 🚜 WE DELIVER MACHINES READY FOR WORK 🚜

Condition: used, axle configuration: 3 axles, first registration: 12/2003, color: other, Year of construction: 2003, Empty weight: 6.500 kg Axle 1: left 10 mm right 16 mm Iedpjx Elfisfx Ahnjtl Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right10 mm We have the possibility to stack trailers! 

Condition: new, Year of construction: 2021, Professional TIG Welding machine FRONIUS type TransTig 2200 Job G/F TIG direct current (DC) Maxi power: 220 A 2-step and 4-step mode (see more technical details on photo) Iodpfjzzv N Iox Ahnotl Year of construction: 2021 New, never used (Purchased price: 3 594 euros) Voltage: 230 V mono

Condition: excellent (used), Year of construction: 1991, We can offer you CO2 carbon dioxide gas used storage tank vessel Volume 21050L; Working pressure 22 bar; Export from EU Iodpfx Ask Eac Dehnjtl We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail.

Condition: used, mileage: 5,52,910 km, power: 338 kW (459.55 HP), first registration: 01/2020, fuel type: gas, empty load weight: 8,168 kg, maximum load weight: 9,832 kg, overall weight: 18,000 kg, tire size: 315/70 22,5, tire condition: 30 %, axle configuration: 4x2, wheelbase: 3,800 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of beds: 1, Year of construction: 2020, operating hours: 5,52,910 h, front tire size: 315/70 22,5, rear tire size: 315/70 22,5, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, parking heater, spoiler, truck registration, Reference number for inquiries: 2305 Iveco Stralis * Year of manufacture: 2020 * ABS (anti-lock braking system) * EBS (electronic brake system) * ESP (electronic stability program) * Power windows * Sleeper cab * Automatic climate control * Refrigerator compartment * Air suspension * Retarder / ZF Intarder * Sleeper berth * Heated seats * Auxiliary heater * Stationary air conditioning * Cruise control * On-board computer * Differential lock * Long-haul > 7.5 t * Digital tachograph * Lane keep assist * OBU preparation * Refrigerator * Electric windows and mirrors * Roof spoiler * Fog lights * Comfort air suspension seat * Multifunction steering wheel Isdpfowrmfwox Ahnstl * Sun visor * Transmission: automatic * Suspension: air / air * Gross vehicle weight: 18,000 kg * Curb weight: 8,168 kg * Payload: 9,832 kg * Permitted gross vehicle weight: 18,000 kg * Tire condition front axle: 40% -- 30% - Tire size: 315/70 R22.5 * Tire condition rear axle: 30%|30% -- 30%|30% - Tire size: 315/70 R22.5 * Wheelbase: 3,800 mm * Tire sizes: 315/70 R22.5 * Blind spot camera * 2x LNG tanks Disclaimer: Subject to changes, prior sale, and errors. You can find more images and videos on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and straightforward financing * Handling of all (export) documents * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Ask our trained specialist staff; we will be happy to advise you.

Condition: used, axle configuration: 3 axles, first registration: 02/2001, color: other, Year of construction: 2001, Empty weight: 6.000 kg Axle 1: left 12 mm right12 mm Axle 2: left 12 mm right 12 mm Axle 3: left 12 mm right 12 mm We have the possibility to stack trailers!  Ijdpfx Ahsyvf Rronetl

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 2,039 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,380 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: TOYOTA 4Y, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10½, rear tire type: cushion tires (black), rear tire size: 23 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, 🚜 COMBILIFT CB2500 | LPG | 4900 MM | FORK POSITIONER | SIDE SHIFT | FULL CABIN | READY FOR WORK 🚜 ✅ FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY AVAILABLE Looking for a forklift that generates value from day one, rather than incurring maintenance costs? This COMBILIFT CB2500 is the perfect solution. Professionally serviced, thoroughly inspected, and ready for immediate operation, this multidirectional forklift is ideal for warehouses, production facilities, timber yards, steel service centers, and logistics operations. ## ⭐ KEY BENEFITS ✅ Fully serviced before sale ✅ Start-up warranty included ✅ Excellent technical and cosmetic condition ✅ Low operating hours – only 2,039 h Iodpfjzytvpex Ahnetl ✅ Ready for immediate operation ✅ No additional investment required ✅ Live online demonstration available ✅ Direct delivery to your facility --- ## 📋 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT 🚜 Model: CB2500 📅 Year: 2022 ⚖️ Capacity: 2,500 kg 📏 Load Center: 600 mm ⛽ Engine: Kubota LPG Gas ⚙️ Engine Power: 42 kW 🕒 Operating Hours: 2,039 h ⬆️ Lift Height: 4,900 mm 🏋️ Machine Weight: 6,300 kg --- ## 📐 DIMENSIONS 📏 Overall Height: 2,250 mm 📏 Construction Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,550 mm 📏 Fork Positioner Width: 1,400 mm --- ## 🔩 FORKS 📌 Fork Length: 1,200 mm 📌 Fork Section: 120 x 50 mm --- ## 🛞 TIRES Front: 16 x 7 x 10½ Rear: 23 x 10 x 16 --- ## 🛠️ EQUIPMENT ✅ Full enclosed cabin 🔥 Heating system 📻 Radio ↔️ Hydraulic fork positioner ↔️ Side shift 💡 Working lights ⛽ LPG engine 🔄 Multidirectional steering system 👨‍🔧 Operator comfort package --- ## 🏭 IDEAL FOR 🌲 Timber & wood processing 🪑 Furniture manufacturing 🏗️ Steel mills & service centers 🔩 Aluminum & PVC profiles 📦 Long load handling ↔️ Narrow aisle operations 🏢 Indoor & outdoor applications --- ## 🤝 WHY CHOOSE FT LOGISTICS? FT LOGISTICS specializes exclusively in: ✅ Sideloaders ✅ Multidirectional forklifts ✅ Long-load handling equipment ✅ Specialist material handling solutions Every machine undergoes a complete technical inspection, servicing, and operational testing before delivery. 🌍 100+ machines available in stock 🚛 Deliveries throughout Europe, South America, Africa, Asia, and the Middle East. ### 🚀 WE PROVIDE 🔧 Full pre-delivery service 🛡️ Warranty 👨‍🔧 Professional technical support 💰 Leasing & financing assistance 🚛 Transport organization 📄 Export & customs documentation 🔩 After-sales service Hundreds of customers across Europe trust FT LOGISTICS and continue to return for future purchases. 📹 Live online demonstration available 📸 Additional photos & videos on request 🚛 Customized transport quotation worldwide ### FT LOGISTICS 🚜 WE DELIVER MACHINES READY FOR WORK 🚜

Condition: new, Year of construction: 2021, functionality: fully functional, fuel type: gas, power: 854 kW (1,161.12 HP), output voltage: 400 V, output frequency: 50 Hz, motor manufacturer: MTU, =Scope of supply= Genset mtu 8V4000 GS 400 V Pump group Drycooler (radiator) HT/LT Exhaust system, silencer with valve Lubrication expansion tank Electrical control panel for engine, auxiliary systems, automatic protective circuit breaker Cogeneration module – hot water (400 kW) =Technical specifications= Time for delivery - in stock Engine type - 8V4000L33 Electrical power - 854 kW Engine speed - 1500 rpm Total efficiency - 80 % Itsdpezmmzxefx Ahnol Voltage - 400 V Frequency - 50 Hz =Other information= Production country - Germany

Condition: used, axle configuration: 1 axle, first registration: 01/2005, color: other, Year of construction: 2005, Empty weight: 4.130 kg Axle 1: left 15 mm right 15 mm Axle 2: left mm right mm Axle 3: left mm right mm Isdpfeyvf Iwsx Ahnetl We have the possibility to stack trailers! 

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 031022140047, Year of construction: 2022, operating hours: 126 h, total length: 650 mm, total height: 1,200 mm, total width: 610 mm, overall weight: 145 kg, laser power: 30 W, feed length X-axis: 130 mm, feed length Y-axis: 180 mm, feed length Z-axis: 330 mm, We are offering for sale a professional industrial SLS 3D printer, the Sinterit Lisa X, from our company's assets. The machine has been used very little, exclusively for development purposes, as evidenced by its total runtime of only 126 printing hours. The printer is in like-new condition, fully functional, and ready for immediate deployment in your production. Before the sale, the machine underwent a complete diagnostic check, software update, and professional service by an authorized partner. During this service, the printer received a significant hardware upgrade. The original wire-based powder deposition mechanism was replaced with a new and highly reliable system using a strip (so-called Recoater Strip retrofit) as part of the authorized intervention. This ensures maximum reliability and trouble-free operation. Furthermore, the seals of the printing chamber were replaced, the machine was professionally cleaned, the electronic contacts were treated, and the paint was restored. The machine has successfully completed a calibration print under load and is running on the latest firmware. Itodpfx Aezyagzehnol Regarding the technical specifications, it utilizes Selective Laser Sintering (SLS) technology with a 30W IR laser. The printing speed reaches up to 14 mm/h, which is ideal for rapid prototyping and small-batch production. The printing volume is 130 x 180 x 330 mm for PA and PP materials and 130 x 180 x 340 mm for flexible materials. A major advantage is the open system of the Sinterit Studio Advanced software, which allows full support for third-party printing materials and access to dozens of printing parameters. As a huge bonus, we are including the available stock of printing powder completely free of charge with the printer. If interested, it is possible to purchase the complete set of accessories for subsequent processing of the prints (cleaning manipulator, sandblasting station, certified ATEX vacuum cleaner) after mutual agreement. We will be happy to provide you with more information, send you the complete machine specifications, or arrange a personal inspection.

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 4,724 h, load capacity: 4,000 kg, lifting height: 5,500 mm, free lift: 2,400 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,600 mm, gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,450 mm, total length: 2,300 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚜🔧 💼 Years of experience | In-house service & paint shop | Expert consultation | Pan-European transport | After-sales support Looking for a forklift you can rely on? 🤝 We are a reputable European dealer of new and used forklifts. From small businesses to international facilities – our machines ensure dependable and efficient logistics. ⚙️ 🌟 Why Choose FT Logistics ✅ Every forklift undergoes comprehensive technical servicing – inspection, testing, oil & filter changes, major component overhauls ✅ UDT certification available upon request ✅ In-house workshop & paint shop – forklifts reconditioned both visually and mechanically ✅ Own transport fleet across Europe 🚛 ✅ Operator training & on-site functional testing upon delivery ✅ After-sales technical support – we’re here for you even after the purchase ✅ Machine viewing & testing available at our headquarters ✅ Financing assistance via top leasing partners ✅ Invoice in EUR or PLN 💶 🔩 AVAILABLE MODEL: COMBILIFT C4000 – Four-way / Multidirectional Forklift / Multidrive System ✅ Year: 2002 ✅ Operating hours: 4,724 h ✅ Drive: GAS ⛽ ✅ Capacity: 4,000 kg ✅ Mast: Duplex – 4,500 mm ✅ Fork positioner: 1,380 mm | Forks: 1,200 mm ✅ Superelastic tyres – 100% ✅ Free lift: 2,400 mm ✅ Condition: Excellent – after major service ✅ Appearance: Clean, corrosion-free, ready for work 📏 Dimensions: Height: 2,450 mm | Length: 2,300 mm | Width: 2,250 mm | Positioner: 1,320 mm | Overall height: 3,600 mm 🚀 Ideal For: 🏭 Narrow aisle warehouses Ijdpfx Ahszzfkhenstl 🪵 Wood, steel & pipe sectors 📦 Handling long loads 🏗️ Indoor & outdoor operations FT Logistics – Quality you can count on. Service you can trust. 💙

Condition: used, Year of construction: 2015, operating hours: 19,600 h, functionality: fully functional, fuel type: gas, power: 2,028 kW (2,757.31 HP), output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, =Scope of supply= Complete set of 3 x MTU 16V4000 GS (16V4000L64) with Skid cooling groups Radiators Absorption chiller Genset outgoing breakers Lube oil systems Electrical auixiliaries panels MTU - MCS , MTU - MMC panels =Technical specifications= Time for delivery - in stock Engine type - 16V4000L64 Electrical power - 2028 kW Engine speed - 1500 rpm Total efficiency - 89 % Voltage - 400 V Frequency - 50 Hz Itodpfxezmnzae Ahnsl =Other information= Production country - Germany

Condition: new, functionality: fully functional, fuel type: gas, power: 1,521 kW (2,067.98 HP), output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, 9 pcs in stock =Scope of supply= Genset mtu 12V4000L64FNER, 400 V for operation with Natural Gas. gas train of 116-250 mbar inlet pressure with 1m flexible rubber-metal connecting hose. set of sylomer stripes for genset foundation installation. Ijdpfx Asy Hcvbehnetl set of flexible connection for engine coolant circuit with flange connection set of flexible connection for mixture coolant circuit with flange connection set of exhaust bellows with flange connection and companion flange set Maintenance-free starter batteries, mounted on base frame. MIP (MTU Interface Panel) incl. Black Start option and ECU Remote Control interface =Technical specifications= Time for delivery - in stock Engine type - mtu 12V4000L64FNER Electrical power - 1521 kW Engine speed - 1500 rpm Electrical efficiency - 43.9 % Total efficiency - 88.6 % Alternator type - Leroy Somer LSA 53.2 VL6 Voltage - 400 V Frequency - 50 HZ < 500mg NOx at 5% O2 =Other information= Production country - Germany

Condition: excellent (used), Price per unit. For sale: a professional glue roller / glue applicator from Tünkers GmbH, designed for precise application of glue onto paper, cardboard, corrugated board, leather, fabrics, and other flat materials. This device is suitable for bookbinding shops, printing houses, production facilities, and anywhere where uniform glue distribution is required. The machine is equipped with a system of working rollers ensuring even glue application and adjustment of the amount of material dispensed. The robust, cast iron construction guarantees high durability and stable operation for many years. Technical specifications: Manufacturer: Tünkers GmbH Isdpfx Ahsziwunjnotl Type: Glue roller / glue applicator Machine number: 12/30274/22 Electric drive Rotation direction switch (left / stop / right) Adjustment of the amount of glue applied Two dispensing rollers Metal glue tank Adjustable work table Robust cast iron construction Made in Germany This device is ideal for working with glues used in bookbinding and packaging production. The visual condition corresponds to the photos.

Condition: excellent (used), Plate size: 1500 x 1500 mm Plate height: 100 mm Table height above floor: 950 mm Material thickness, approx.: 11.5 - 13 mm Bore diameter: 16 mm Weight, approx.: 397 kg Iodpfx Ahjzn I Uisnotl