Used Purifier for sale (65)

Year of construction: 2021, condition: new, Air cleaner for room air purification for aerosols, such as viruses, bacteria, pollen, dusts. ISI AIR CLEANER - adjustable up to 1600 m³/h - 230 V - for large rooms up to 160 m³ Air output: adjustable up to 1600 m³/h Room size: suitable up to 160 m³ Power: 69 - 209 W Operating voltage: 230V 50/60Hz, 5m connection cable with Schuko plug (EU4) (plug & play) Noise level*: 38.2 - 48.1 db(A 1 m) Dimensions L/W/H in mm: L 550 / W 660 /H 2000 Colour: Lower part: RAL 7016, upper part RAL 7035 Weight: 130 kg Manu´facturer: ISI: Industrieprodukte Knedeh Rfcnopfx Aabjc Scope of delivery: 1 piece ISI AIRCLEANER FT1 1 piece Fine dust filter, ISO 16080 ePM1-90% 1 piece HEPA filter H14, EN1822 Delivery: ex works Buchholz (Westerwald) excluding packaging, directly available The application: Currently, air purifiers are only becoming known because of the Corona pandemic. In principle, air purifiers are also recommended outside of a pandemic. They can significantly improve air quality. Even after the pandemic, there are seasonal pathogens circulating, such as influenza in the colder months. Asthmatics and allergy sufferers benefit from the filtration of pollen and other allergens year-round from an air purifier. How it works: The room air is sucked in at the bottom of the filter unit. In the pre-filter area, the air is freed from dust and larger particles. A subsequent, highly effective HEPA H14 filter system removes 99.995% of particles or aerosols, which may contain pathogens, from the air. Your advantages: - Highly efficient EC fan as standard - Adjustable speed and air output - Long service life and easy filter change - Low noise level - Separation efficiency of up to 99.95 - Quality Made in Germany

Condition: new, Year of construction: 2024, The OS 3008 welding extractor is ideal for extracting smoke and fumes generated during welding, polishing, cutting or grinding rare precious metals. It can purify large amounts of harmful metal particles suspended in the air. This machine is characterized by high purification efficiency, low noise emission and takes up a relatively small area. It is adapted for extraction during arc welding, carbon dioxide, MIG/MAG method, gouge arc, welding in the gas environment. Suction power: 3000 m^3/h These extractors are equipped with high-performance filter inserts, distinguished from conventional filters by the presence of a PTFE (Polytetrafluoroethylene) membrane layer. In conventional filters, the length of the fibers of traditional filter materials such as cotton, satin, paper and other cellulose fibers is from 5 to 60 µm. Soot particles contained in the extracted smoke can remain inside the filter, blocking the filter element. When the blockage becomes too large, the ash cannot be effectively removed from the filter element, the air resistance increases and the gas flow decreases. As the filter becomes more contaminated, the filtering efficiency drops dramatically. Our filter contains a PTFE membrane layer, the fine structure of which blocks microscopic dust particles. These particles block the dust layer on the surface of the filter material. Most of the dust particles are blocked on the outer surface of the filter, not penetrating the filter interior. Over time, the particles can be removed from the filter by the flow of purified, compressed air. Air volume (m^3/h) 3000 Kjdjtu H N Hjpfx Aabjnc Pressure (Pa) 2000 Filter efficiency (%) 99.9 Power (kW) 3 Filter area 30 Filter size 700 x 750 x 1700 mm Voltage (V) 380 Weight (kg) 90

Year of construction: 2001, condition: ready for operation (used), General Data Measurements width 1860 mm Kedpfx Aow Tfhfeabsnc Measurements depth 1400 mm Measurements height 1800 mm Machine weight 1900 kg Main Drive Number of axis 5 Movement X-Axis Movement 350 mm Y-Axis Movement 250 mm Z-Axis Movement 220 mm V-Axis Movement 32 mm U-Axis Movement 32 mm Workpiece Workpiece weight 500 kg Additional Equipment Water purifier tank Central lubrication Paper filtration Working light This 5-axis Mitsubishi FX10K wire EDM machine was manufactured in 2001. It features a 32-bit CNC control, automatic wire threading, and a generator for brass wire cutting. Capable of handling workpieces up to 630 × 530 mm and 500 kg, it includes a water purifier tank and central lubrication. Reach out for more information about this machine. Application Types EDM

Condition: used, functionality: fully functional, overall weight: 320 kg, total length: 750 mm, total width: 895 mm, total height: 1,260 mm, TECHNICAL SPECIFICATIONS Kodpfxjw Uq Dne Aabonc Compressed air system comprising: - 1 air compressor with filter,. Maximum air flow rate 2500 litres/min . Maximum operating pressure 11 bar. Nominal motor power: 15 kW. Noise level 67 dB (A). Electrical connection 400 V Dimensions: 750×895×1260 mm Weight 320 kg - 1 COMPAIR F100S air dryer, Refrigeration air treatment with condensate filter system. Air flow rate 10 m³/min. Power 1.5 kW. Power supply: 230 V/PH1/50 Hz. Maximum pressure 16 bar. 2" connection . Refrigerant: R513A Dimensions: 779×720×1360 mm Weight: 186 kg - 1 Condensate purifier: PURA ELITE 5. Flow rate 300 m³/h. Condensate inlet: 2×1/2". Purified water outlet: 1" . Residual oil content: 10 ppm Dimensions: 580×190×610 mm - with 4 DONALDSON ultra filters - 1 buffer tank of 2 m³ (2018 litres). Year: 2017 . Maximum permissible pressure: 10.67 bar. Test pressure: 15.83 bar + - 1 x 1 m³ (1000 L) tank Year: 2016 Working pressure: 12 bar Test pressure: 17.2 bar

Year of construction: 2017, condition: good (used), machine/vehicle number: 4066, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request. Knodpeqmmvcjfx Aabec

Condition: new, - High level of protection and comfort during welding - Particle filter with spark arrestor, pre-filter, and 5-stage filter saturation indicator that shows the user the condition of the particle filter - Optional gas and odor filters can be used for additional protection against common gases, vapors, and unpleasant odors that can arise during welding - Automatic airflow control ensures the airflow to the headpiece is always constant. - Immediate visual and audible alarms are triggered when specified limits are continuously exceeded (battery power, airflow monitoring). The Adflo powered air respirator system draws in contaminated air from the environment, filters it through the appropriate filters, and then directs the purified air into the headpiece via an air hose. For further information on the protection levels and any usage restrictions, please refer to the operating instructions for the respective headpieces. Set: 3M Adflo Starter Kit · 1x Adflo Powered Respirator 837730 · 1x QRS Air Hose 834016 · 1x QRS Adapter 533506 · 1x Air Flow Meter 838020 · 1x Prefilter 836010 · 1x Spark Arrestor 836000 · 1x Particle Filter 837010 · 1x Li-Ion Standard Battery (approx. 8 hours) 837630 · 1x Belt 835000 · 1x Charger 833111 Knodpfx Aajwbiq Uobjc · 1x 3M Versaflo Safety Helmet M306 with Comfort Face Seal and Polycarbonate Visor, Clear Cheapest price online: approx. €1,100 Here for €929

Condition: new, Equipment: dust extraction, For all industrial processes where dust and coarse particles are generated, the clean air dust extractors of the AL-KO CLEAN UNIT D series are the right choice. Thanks to their powerful fans and highly effective filter cartridges, these mobile extraction units ensure clean air in metalworking as well as in the plastics, food, and chemical industries. Functionality: Dust and coarse particles are extracted directly at the machine or via capture hoods and conveyed through a suction line to the inlet of the AL-KO CLEAN UNIT D. In a generously dimensioned pre-separation chamber, coarse particles are separated. The downstream filter cartridges of dust class 'M' filter out the remaining fine dust particles. The differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges even during continuous operation. Venturi nozzles on the filter cartridges enhance the cleaning effect, ensuring consistent suction power and a long filter service life. The collected dust is gathered in an easily maneuverable container with an integrated collection bag, enabling low-dust disposal. The purified air is returned to the workspace via the top of the unit. Applications: - Direct extraction of dust and chips - Suitable for single or multiple workstations - For connection to machines, extraction tables, booths, and ducting - For metal and plastics processing and many other industries - For grinding, polishing, filling processes, and more Advantages: - High suction performance due to an efficient fan and cleanable filters with a long service life Knjdpfx Aowwkrfoabec - Suitable for a wide range of applications - Extremely quiet thanks to highly effective sound insulation - IE3 motors for high energy efficiency - Plug-and-play

Condition: like new (used), Year of construction: 2019, operating hours: 9,710 h, functionality: fully functional, For sale: Intermac Primus 322 waterjet cutting machine. The machine was purchased new in September 2019. Main drive Knjdpfxevpuvgj Aabjc Number of heads: 2 (each with 3 axes) Table External length: 3210 mm External width: 5410 mm Height adjustment: 2150 mm Equipped with robust Intermac Primus OS control unit (Win 10 Enterprise 2016) and a high-pressure capacity of 3800 bar. The machine comes with a water purifier with a capacity of 600L/hour and a 1000L tank. Machine has 9710 production hours (utilization: 12%). The machine has been regularly and properly serviced, with invoices for spare parts available. The reverse osmosis system (purifier) has also been regularly serviced by an authorized service provider/seller—twice a year. Ideal for precision cutting with a working area of 3210 x 2000 mm. Total price (machine + purifier): €60,000 net EXW Cerna, Croatia.

Condition: excellent (used), Here we offer a Millipore Elix 3 water purification system. Ksdpfxeq Ebi Ne Aabonc Purifies 3 liters of water per hour Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" Ksdsl Dw U Dspfx Aabsnc The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Year of construction: 2017, condition: good (used), machine/vehicle number: 4789, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) Kjdpfx Aajqmmcgebonc The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: good (used), Year of construction: 1988, functionality: unexamined, machine/vehicle number: 40 / 670, -KOM 853- Offered here is a Unifil air purifier from ILT Industrie-Luftfiltertechnik GmbH. This unit is in used condition and has not been tested for functionality. Manufacturer: ILT Industrie Luftfiltertechnik GmbH Model: U40 Serial No.: 40 / 670 Year of manufacture: 1988 Voltage: 80 V Current: 3.3 A Frequency: 50 Hz Ksdpjw Ehzysfx Aabjnc

Condition: used, Year of construction: 2002, max. wheel diameter 275 mm max. module 6 min. module 1,5 Knsdpfxevxwnws Aabec Control SINUMERIK 840 C tooth width 5,5 mm spiral angle min. 0 / max. 60 ° max. number of teeth 120 min. number of teeth 5 ratio of transmission 1:10 min. ratio of transmission 1:1 work piece spindle speed max. 110 U/min blade head turning speeds 20 - 110 U/min total power requirement 100 kW weight of the machine ca. 16,7 t dimensions of the machine ca. 5,20 x 2,30 x 2,40 m Internal deburring device U axis / Q spindle chip conveyor coolant device Electrostatic air purifier ELBARON no tools No workpiece clamping device

Year of construction: 2024, condition: new, A part of our machines is available IMMEDIATELTY. Dust collector 11 kW DCO-8L Overview Otinus DCO Dust Collector is a top level solution for industrial fume extraction systems. Powered by a SIEMENS-licensed motor, the duct collector creates the negative pressure to extract air contaminated with dust and harmful fumes from working area. The filtration process is carried out in a few stages. First, the air is directed to the inside of the unit through a spark arrestor, that slows down its flow and causes large particle to fall into the hopper. Small particles enter the filtration area with ultra-tightly adjacent cannister filters from well-known manufactures (H&V, Ahlstrom, TORAY). There, the air is cleaned and then transferred to other sections. The particles accumulated on filters are easily removed by a jet-pulse stream of compressed air controlled by solenoid valves with additional micro shaking of the filters. This solution greatly extends the life of filter cannisters and improves the cleanliness of the purified air. Particles that have fallen off the filters enter the hopper where they can be easily removed. Specifications - Well-known brand filters: H&V, Ahlstrom, TORAY - Filtration class F9 - Filtration accuracy: 99.99% - Airflow: 9000 m3/h Ksdpfjvhcnzsx Aabonc - Tank pressure: 5000 Pa - Effective filtration area: 160 m2 - Motor: 11KW SIEMENS - Hopper volume: 90 L - Machine weight: 1200 kg - Default spark arrestor width: 303 mm

Condition: used, Emulsion splitting plant Oil-water separation system The inexpensive and permanently reliable The solution to the problem is usually the oil/water Separation for dispersed condensates. The purified water meets the legal Sewer discharge regulations -Dimensions: 650/520/H1000 mm Knodpfx Aaedz Smpebsc

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Knedpfx Asib Dadoabsc Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Year of construction: 2016, condition: good (used), machine/vehicle number: 3385, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) Kodpsqmmkkjfx Aabenc The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: used, Emulsion splitting plant, oil-water separation system -The inexpensive and permanently reliable The solution to the problem is usually the oil-/water Separation for dispersed condensates. The purified water meets the legal Sewer discharge regulations. -Dimensions: 750/350/H830 mm Kjdeb A S I Hspfx Aabsnc -Weight: 10 kg

Condition: good (used), Year of construction: 2018, AMBITOWER 10 series filter ventilation (filter tower) is used for welding fume extraction in production halls. Efficient compact hall ventilation systems are used wherever selective smoke detection alone is not sufficient or direct detection during welding work on large or complex metal parts seems unfeasible. Filter towers not only provide effective separation of contaminants, but also contribute to significant savings in hall heating costs in winter. Depending on the application, energy costs can be reduced by up to 70%. This is ensured, among other things, by highly efficient M-class fixed filter cartridges, which guarantee 99% separation efficiency, so that warm, purified air can return to the hall and there is no need to bring in outside air. Areas of application for Keller Ambitower 10 stationary welding fume filtration systems : Welding fume extraction in production halls (hall ventilation system) Ideal for all work areas where local extraction is not practical or not possible, metal industry Mechanical engineering Automotive industry Vehicle construction aircraft construction, etc. Parameters : Engine power - 7.5 Kw. Built-in inverter Capacity - 10000 m3/h Filtration area - 90 m2 Antistatic filter cartridges Noise level - ≤ 75 Year of manufacture: 2018 Technical documentation included dimensions: Kodpoi Atb Tofx Aabjnc width - 2.35m x 1.35m height - 3.50 m Weight - 1800 kg

Year of construction: 2013, condition: good (used), machine/vehicle number: 3063, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request. Kodpfx Aoqmmffoabsnc

Condition: used, Oil-water separation system, oil-water separator, condensate separator -The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge Ksdpfx Aasctla Hjbjnc -Number: 1x filter available -Price: per piece -Dimensions: 460/500/H950 mm -Weight: 32 kg

Condition: used, Year of construction: 1993, machine/vehicle number: 5/4573, total width: 7,500 mm, total height: 11,400 mm, overall weight: 45 kg, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the Knjdpfx Aasqmmalsbec scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: used, Emulsion splitting plant, oil-water separation system Knodpfjctlaqex Aabjc -The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water meets the legal requirements for sewer discharge. -Dimensions: 590/590/H1170 mm -Weight: 58 kg

Year of construction: 2017, condition: good (used), machine/vehicle number: 4068, The cost-effective drainage of condensate for your compressor. Knsdpfx Aaeqmmvrobjc The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: used, Emulsion splitting plant, oil-water separation system The inexpensive and permanently reliable Knsdpfx Aajb A I Ikebec The solution to the problem is usually the oil/water Separation for dispersed condensates. The purified water meets the legal Sewer discharge regulations -Dimensions: 750/600/H950 mm -Weight: 80 kg