Used Quaser Mv 184 P for sale (39)

Condition: good (used), Year of construction: 2011, Traverses XYZ: 700 x 530 x 560mm, table size 900 x 500mm, Heidenhain TNC620 Control, BT40 spindle taper, 24 station tool changer, Spindle speed 9,000rpm, Spindle motor power 18.5kW, Djdpfx Aexv S Ngedaeup Through Spindle Coolant, Low volt light, 4th Axis Rotary Table

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT40 BIG PLUS - Spindle power : 26 [kW] Dsdpfjuhbv Ssx Adasup - Spindle speeds : 15000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560/640/640 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 400X400 [mm] - Pallets number : 2 - Maximum weight upon pallet : 400 [kg] - Maximum workpiece diameter : 630 [mm] - Maximum workpiece height : 900 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4100X2300 [mm] - Machine height : 2720 [mm] - Machine weight : 11000 [kg] MACHINE HOURS - Number of working hours : 3700 [h] EQUIPMENT - CNC : Fanuc 31 iB Interface : Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] * Coolant through spindle * With cabin washing - Chips conveyor : Arrière - Spindle cooling unit - Tool probe - Workpiece probe : Renishaw OMP60

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 600 mm, The machine is a fully functional, continuously controlled 5-axis unit. It was commissioned in 2010. Control system: HEIDENHAIN I TNC 530 + universal KINEMATICS. Tool magazine with 48 positions. Direct measurement in all 5 axes. The machine was used for single-shift, piecework operation. The machine is still occasionally used up to today. It is still connected and can be inspected under power. The model is still being produced with the same technical specifications. New chip conveyor installed. Spindle speed: 15,000 rpm. Workpiece probe: Renishaw + tool probe: BLOOM (laser) – both highly precise. The machine is equipped with a LOSMA oil mist separator. The machine is reliable. The spindle was replaced (not refurbished, but brand new) approximately 5 years ago by an authorized service provider. Accessories included: five-axis vise and 48 various clamping devices (almost full equipment). New LED lighting installed. The machine is excellently maintained and, for its age, is truly in outstanding condition. Djdpsymg Iyjfx Adaoup

Condition: excellent (used), Year of construction: 2008, HEIDENHAIN iTNC530 with A + C axis Working travels 712 x 508 x 515 mm Table swivelling +30°/-120° Table rotating 360° Spindle taper SK40 Big Plus Spindle speeds -15'000 rpm tool changer 60 pos. Coolant through spindle 3D tracer Renishaw Dedpjtt R E Tofx Adaoup Tool breakage control Tool lenght measuring device Chip conveyor Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2007, condition: excellent (used), HEIDENHAIN iTNC530 with B + C axis Working travels 885 x 800 x 520 mm Table size 600 x 500 mm Table swivelling +30°/-120° Dedpfx Adoh Agwreasup Table rotating 360° Spindle taper SK40 Big Plus Spindle speeds -15'000 rpm tool changer 60 pos. Coolant through spindle 3D tracer Renishaw MARCELS MASCHINEN CH

Condition: used, Year of construction: 2011, Technical details: x-travel: 410 mm y-travel: 610 mm z-travel: 500 mm turning speeds: 15000 1/min tool adaptor: SK 40 control: iTNC 530 HEIDENHAIN smart NC table:: 320 x 320 mm table load: 100 kg tool change unit: 48 Pos. total power requirement: 35 kVA weight of the machine ca.: 7,4 t dimensions of the machine ca.: 4,15 x 3,8 x 3,28 m 5-axis simultaneously machining center, NC-round-swivelling table, C-axis 360°, B-axis +30/-120°, chipconveyor, 3D touchprobe, internal coolant supply 20bar, Dsdpfswlhvwox Adajup el. handwheel, kinematicsopt, meter readings: approx. 9.600h "machine on", approx.3.500h "spindle on" *

Condition: good (used), Year of construction: 2011, 1 used 5-axis machining center Manufacturer Quaser Type MF 400/12 C Serial no. 306B110024 Year of manufacture 08/2011 Control, Siemens, type 828D, Technical data Spindle mount Bt 40 Spindle speed 12000 rpm Number of tool positions 48 Travel path x 410 mm Travel path y 610 mm Travel path z 510 mm Diameter of rotary table 400 mm Swivel range 30 – 120 degrees axis A Dsdpfx Adstr Um Toaeup Axis B 360 degrees Connected load 21 KVA Own weight 7,300 kg, Dimensions L/W/H = 282x250x307, Equipped with Internal spindle cooling Chip conveyor

Condition: used, Year of construction: 2014, 5 axis machine QUASER MF400C/12C Year of production: November 2014 Installation date 2015 Dedpfx Adsucliloaoup Table: ∅320 mm Passages: X- 410 mm Y- 610 mm Z- 510 mm A- +30° -120° C- 360° Tool holder: BT40 Tool magazine: 30 pcs Max spindle speed: 12,000 rpm Cooling through the spindle Control: CNC SIEMENS SINUMERIK 828D Tool probe very good condition of the machine machine can be loaded on a standard truck height of the machine 275cm width 245cm length 300cm weight of machine 7300kg

Condition: ready for operation (used), Year of construction: 2002, operating hours: 9,366 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 40, TECHNICAL DETAILS X-axis travel: 1,020 mm Y-axis travel: 610 mm Z-axis travel: 560 mm Spindle Spindle speed: 10,000 rpm Spindle power: 11–15 kW Pallet system Number of pallets: 2 Pallet size: 1,050 × 550 mm Cooling system High-pressure coolant system: 15 bar Dujdjwi Iw Ajpfx Adaep Tool changer Tool magazine: Chain type Number of tool positions: 40 Control system Control system: Fanuc 18M MACHINE DETAILS Overall dimensions (L × W × H): 4,020 × 2,660 × 3,080 mm Machine weight: 12,000 kg On-time: 37,210 h Operating hours: 9,366 h EQUIPMENT - Chip conveyor included - 4th axis integrated as a table

Condition: ready for operation (used), Year of construction: 2011, operating hours: 39,737 h, machine/vehicle number: 302E110064, travel distance X-axis: 885 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, workpiece diameter (max.): 640 mm, workpiece weight (max.): 500 kg, table width: 500 mm, table length: 600 mm, spindle speed (min.): 15,000 rpm, operating hours of spindle: 10,687 h, number of slots in tool magazine: 48, tool length: 280 mm, tool diameter: 125 mm, Equipment: documentation/manual, Machine for sale: Quaser UX600 15C - universal machining center - manufactured in 2011 in Taiwan. - 5-axis machine with direct measurement on all axes - control unit: Haidenhain iTNC 530 Operating hours: 39,737 Purpose: milling Machine length: 3700mm Dodpjwlpywofx Adajup Machine width: 4000mm Machine height: 3100mm Machine weight: 12,100 kg Number of spindles: 1; spindle speed range: 15,000 1/min Strokes: X axis: 885mm; Z axis: 500mm; Y axis: 800mm Table external length: 600mm external width: 500mm Tool maximum tool length: 280mm maximum tool weight: 7 kg maximum tool diameter: 125mm tool holder: SK 40 internal cooling: yes The machine works in 3 shifts - every day! The machine comes with 20 SK40 holders!

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 3,500 h, travel distance X-axis: 410 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 100 kg, number of slots in tool magazine: 48, spindle speed (max.): 1,500 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Control: Heidenhain iTNC 530 Smart NC X-axis: 410 mm Y-axis: 610 mm Z-axis: 500 mm Table data Table size: 320 x 320 mm Maximum table load: 100 kg C-axis: 360° B-axis: +30° to -120° Spindle & tool holder Speed: 15,000 rpm Tool holder: SK 40 Tool changer: 48 positions MACHINE DETAILS Total power requirement: 35 kVA Machine weight: approx. 7.4 t Space requirement: approx. 4.15 x 3.8 x 3.28 m Machine switched on: approx. 9,600 h Spindle running time: approx. 3,500 h Dusdpfsvzacpjx Adaop EQUIPMENT - Chip conveyor - IKZ 20 bar (internal cooling through the spindle) - Electronic handwheel - 3D measuring probe and KinematicsOpt for optimal machine calibration

Condition: excellent (used), X 885, Y 800, Z 500mm, A 30-120dg, C 360dg. HSK 63 Big Plus, 15,000Rpm, ATC 60 pos, Renishaw probe, Heidenhain TNC 530. Djdpswzv Igefx Adajup

Condition: used, Year of construction: 2022, operating hours: 5,403 h, functionality: fully functional, machine/vehicle number: 315D210043, travel distance X-axis: 712 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 515 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 25 kVA, torque: 108 Nm, controller manufacturer: Siemens, controller model: S828D, total height: 3,350 mm, total length: 2,720 mm, total width: 3,900 mm, table load: 200 kg, rotary table diameter: 410 mm, overall weight: 8,730 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 1,182 h, coolant supply: 3 bar, number of slots in tool magazine: 48, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, QUASER UX 500 C Siemens S828D 315D210043 including 10.4" screen with movable operator panel, tiltable and rotatable Dodpfx Adsxwp E Ujasup Software option: 3D simulation Software option: network drive management Main spindle SK40, suitable for standard holders and holders with face contact according to DIN 69871 Tool pull studs according to DIN 69872 (not included) Main spindle speed 12,000 rpm, 13.3 kW/85 Nm (S6-25%), direct-coupled, SC-4.2 Includes temperature-controlled cooling system Portable electronic handwheel Heat exchanger for electrical cabinet Double-arm tool changer with 30 magazine positions Pneumatically operated tool changer door Direct position measuring system on rotary axis Direct position measuring system on swivel axis Infrared receiver for workpiece and tool measurement Machine color: RAL 7035 Light Grey Coolant tank, spindle head, and doors: RAL 9005 Jet Black Three-color signal tower Coolant spray gun External air blast for dry machining Automatic central lubrication for ball screws Computer-optimized heavy machine base made of heavily ribbed cast iron Stable and rigid machine construction due to portal design Chip removal system, consisting of work area chip flushing with Grundfos pump 75 l/min at 3 bar, chip trays made of stainless steel, and 2 screw conveyors in the work area Full work area enclosure with 2 corner sliding doors and 2 work area lights Flood coolant system with 4 ring nozzles positioned at the spindle nose, supplied by Grundfos pump, 75 l/min at 3 bar Year of manufacture: 2022

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, FANUC 18 M control Pallet changer table Weight approx. 12,000 kg Dusdexqmffjpfx Adaop