Used 5 Th Axis Quaser for sale (37)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 314C19003, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Quaser UX630P — 5-Axis CNC Machining Centre, 2020 Key specifications: - Simultaneous 5-axis, B-axis ±120°, C-axis 360° continuous - Spindle: HSTec HM-15A Built-in, HSK-A63, 15,000 rpm, 51 kW, 162 Nm - Rotary/tilt table: Peiseler (Germany), Direct Drive, Ø480 mm, 500 kg load, max. workpiece Ø630 × 540 mm - Control: Heidenhain TNC 640, incl. options DCM, Kinematics Opt, LAC, DNC (Opt. 18) - Tool magazine: 90 positions (HSK-A63) - Through-spindle coolant 20 bar, Heidenhain linear scales on all axes - Renishaw 3D workpiece probe + Blum laser tool measuring system - Schunk Vero-S zero-point clamping system - BMO robot interface installed and programmed - Year: 2020 | Original purchase price: €370,000 Approx. 150 HSK-A63 tool holders available for takeover — subject to separate negotiation. Klodpfxoyt Ha Ns Abcop Full specifications and equipment list available in the attached PDF. Machine can be inspected in operation. Video and test run on request. Location: Ommen, Netherlands. Operating hours spindle: 4,726 hours!

Condition: good (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 600 mm, The machine is a fully functional, continuously controlled 5-axis unit. It was commissioned in 2010. Control system: HEIDENHAIN I TNC 530 + universal KINEMATICS. Tool magazine with 48 positions. Direct measurement in all 5 axes. The machine was used for single-shift, piecework operation. The machine is still occasionally used up to today. It is still connected and can be inspected under power. The model is still being produced with the same technical specifications. New chip conveyor installed. Spindle speed: 15,000 rpm. Workpiece probe: Renishaw + tool probe: BLOOM (laser) – both highly precise. The machine is equipped with a LOSMA oil mist separator. The machine is reliable. The spindle was replaced (not refurbished, but brand new) approximately 5 years ago by an authorized service provider. Accessories included: five-axis vise and 48 various clamping devices (almost full equipment). New LED lighting installed. The machine is excellently maintained and, for its age, is truly in outstanding condition. Klsdpsymg Iyefx Abcep

Condition: good (used), Year of construction: 2011, 1 used 5-axis machining center Manufacturer Quaser Type MF 400/12 C Serial no. 306B110024 Year of manufacture 08/2011 Control, Siemens, type 828D, Technical data Spindle mount Bt 40 Spindle speed 12000 rpm Kjdpotr Um Tofx Abcolp Number of tool positions 48 Travel path x 410 mm Travel path y 610 mm Travel path z 510 mm Diameter of rotary table 400 mm Swivel range 30 – 120 degrees axis A Axis B 360 degrees Connected load 21 KVA Own weight 7,300 kg, Dimensions L/W/H = 282x250x307, Equipped with Internal spindle cooling Chip conveyor

Condition: used, Year of construction: 2014, 5 axis machine QUASER MF400C/12C Year of production: November 2014 Installation date 2015 Table: ∅320 mm Passages: X- 410 mm Y- 610 mm Z- 510 mm A- +30° -120° C- 360° Tool holder: BT40 Tool magazine: 30 pcs Max spindle speed: 12,000 rpm Cooling through the spindle Control: CNC SIEMENS SINUMERIK 828D Tool probe very good condition of the machine Klsdpfx Absuclilscep machine can be loaded on a standard truck height of the machine 275cm width 245cm length 300cm weight of machine 7300kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, operating hours: 3,500 h, travel distance X-axis: 410 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 500 mm, workpiece weight (max.): 100 kg, number of slots in tool magazine: 48, spindle speed (max.): 1,500 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Control: Heidenhain iTNC 530 Smart NC X-axis: 410 mm Y-axis: 610 mm Z-axis: 500 mm Table data Table size: 320 x 320 mm Maximum table load: 100 kg Klsdpfxsvzacpe Abcjp C-axis: 360° B-axis: +30° to -120° Spindle & tool holder Speed: 15,000 rpm Tool holder: SK 40 Tool changer: 48 positions MACHINE DETAILS Total power requirement: 35 kVA Machine weight: approx. 7.4 t Space requirement: approx. 4.15 x 3.8 x 3.28 m Machine switched on: approx. 9,600 h Spindle running time: approx. 3,500 h EQUIPMENT - Chip conveyor - IKZ 20 bar (internal cooling through the spindle) - Electronic handwheel - 3D measuring probe and KinematicsOpt for optimal machine calibration

Condition: excellent (used), X 885, Y 800, Z 500mm, A 30-120dg, C 360dg. HSK 63 Big Plus, 15,000Rpm, ATC 60 pos, Renishaw probe, Heidenhain TNC 530. Kledjwzv Igjpfx Abcop

Condition: excellent (used), Year of construction: 2008, HEIDENHAIN iTNC530 with A + C axis Working travels 712 x 508 x 515 mm Table swivelling +30°/-120° Table rotating 360° Spindle taper SK40 Big Plus Spindle speeds -15'000 rpm tool changer 60 pos. Coolant through spindle 3D tracer Renishaw Tool breakage control Tool lenght measuring device Chip conveyor Misc. accessories Klodpfjtt R E Tex Abcep MARCELS MASCHINEN CH

Year of construction: 2007, condition: excellent (used), HEIDENHAIN iTNC530 with B + C axis Working travels 885 x 800 x 520 mm Table size 600 x 500 mm Table swivelling +30°/-120° Table rotating 360° Spindle taper SK40 Big Plus Spindle speeds -15'000 rpm tool changer 60 pos. Coolant through spindle 3D tracer Renishaw Klsdpfoh Agwrsx Abcsp MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2006, operating hours: 22,715 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 560 mm, spindle speed (min.): 12,000 rpm, operating hours of spindle: 5,570 h, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Offered here is a machining center from the manufacturer Quaser. The machine is in very good condition and can be inspected under power in our facility. Spindle hours: 5,570 h Free loaded on truck Manufacturer: Quaser Model: MV154PL/12 Control: Heidenhain iTNC 530 Year of manufacture: 2006 Technical data: Travel X-Y-Z: 1020x500x560 mm Rapid traverse: 40 m/min Table clamping surface: 1200x550 mm Spindle taper: BT 40 Big Plus Kljdpfxeyak D Se Abcsp Tool magazine: 30 positions Spindle speed: max. 12,000 rpm, stepless Spindle motor: 18.5 kW Transport dimensions: 2600x2450x2600 mm Weight: approx. 6.5 t Internal coolant supply (CTS)

Condition: used, Year of construction: 2006, Technical details: x-travel: 1.500 mm y-travel: 700 mm z-travel: 610 mm control: HEIDENHAIN iTNC 530 table-size: 1.400 x 700 mm tool taper: SK 40 numbers of positions in the tool changer: 48 fach spindle turning speed - stepless: 15000 1/min rapid traverse: 36 m/min table load capacity: 700 kg spindle drive: 25 kW total power requirement: 30 kVA Klsdpfsndz Aqsx Abcsp weight of the machine ca.: 9,1 t dimensions of the machine ca.: 3,7 x 2,65 x 2,9 m vertical machining center, 20 bar internal coolant supply with paper filter, 3D-touchprobe, chipconveyor, el. handwheel meter readings: approx. 43.600 h "machine on", approx. 20.000 h "spindle on", *

Condition: used, Year of construction: 2011, Technical details: x-travel: 410 mm y-travel: 610 mm Kodpfewlhvwox Abcslp z-travel: 500 mm turning speeds: 15000 1/min tool adaptor: SK 40 control: iTNC 530 HEIDENHAIN smart NC table:: 320 x 320 mm table load: 100 kg tool change unit: 48 Pos. total power requirement: 35 kVA weight of the machine ca.: 7,4 t dimensions of the machine ca.: 4,15 x 3,8 x 3,28 m 5-axis simultaneously machining center, NC-round-swivelling table, C-axis 360°, B-axis +30/-120°, chipconveyor, 3D touchprobe, internal coolant supply 20bar, el. handwheel, kinematicsopt, meter readings: approx. 9.600h "machine on", approx.3.500h "spindle on" *

Condition: used, Year of construction: 2010, X axis: 700mm Y axis: 560mm Kodjx Hypxjpfx Abcjlp Z axis: 560mm Table Load: 500kg Magazine positions: 30 / BT40 Max. spindle speed: 12000RPM Spindle oil chiller Through spindle coolant Floor space W x D (mm) 2,235 x 2,420

Condition: good (used), Year of construction: 2008, Quaser MV 154 PL, Control Heidenhain iTNC 530, Year of manufacture 2008, Travel X/Y/Z 1000/530/560 mm, Tool changer with 30 positions, Noc Tqfqzew Uf Nfe Rowb Tool holder SK 40, Air blast through the spindle, ICS 20 bar, External cooling, Scraper belt chip conveyor, 3D probe, Tsc Aldaswlffpsbsb infrared receiver, Temperature-controlled oil cooling system, Thermal compensation, Kodpsydvx Aofx Abcjlp Spindle replacement 2021,

Condition: excellent (used), FANUC 18iMB Control Working travels 710 x 610 x 650 mm Tool changer with 60 Positions Spindle speeds 15'000 rpm Spindle taper BT40 2 paletts 500 x 500 mm B-axis 0.001° Cooling through spindle Kjdpfjx A E Aajx Abcelp Tool measuring BLUM Clamping tower Chip conveyor Misc. accessories MARCELS MASCHINEN AG

Condition: excellent (used), Year of construction: 2015, Incl. chip conveyor Incl. inclined bed filter system Incl. zero-point clamping system Incl. 4th axis Rotamatik 120 Renewed: Spindle Motor with new bearings Kjdpfx Aoibat Ijbcslp X-axis new ball screw New Däublin Offer on request

Condition: good (used), Year of construction: 2011, Traverses XYZ: 700 x 530 x 560mm, table size 900 x 500mm, Heidenhain TNC620 Control, BT40 spindle taper, Kjdpfsxv S Ngox Abcelp 24 station tool changer, Spindle speed 9,000rpm, Spindle motor power 18.5kW, Through Spindle Coolant, Low volt light, 4th Axis Rotary Table

Condition: ready for operation (used), Year of construction: 2011, operating hours: 39,737 h, machine/vehicle number: 302E110064, travel distance X-axis: 885 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: HEIDENHAIN iTNC 530, workpiece diameter (max.): 640 mm, workpiece weight (max.): 500 kg, table width: 500 mm, table length: 600 mm, spindle speed (min.): 15,000 rpm, operating hours of spindle: 10,687 h, number of slots in tool magazine: 48, tool length: 280 mm, tool diameter: 125 mm, Equipment: documentation/manual, Machine for sale: Quaser UX600 15C - universal machining center - manufactured in 2011 in Taiwan. - 5-axis machine with direct measurement on all axes - control unit: Haidenhain iTNC 530 Operating hours: 39,737 Purpose: milling Machine length: 3700mm Machine width: 4000mm Machine height: 3100mm Machine weight: 12,100 kg Number of spindles: 1; spindle speed range: 15,000 1/min Strokes: X axis: 885mm; Z axis: 500mm; Y axis: 800mm Table external length: 600mm external width: 500mm Klsdpewlpywefx Abcep Tool maximum tool length: 280mm maximum tool weight: 7 kg maximum tool diameter: 125mm tool holder: SK 40 internal cooling: yes The machine works in 3 shifts - every day! The machine comes with 20 SK40 holders!

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 560 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, TECHNICAL DETAILS Travels X-axis: 760 mm Y-axis: 530 mm Z-axis: 560 mm Kodexlf D Nepfx Abcslp Speeds Rapid traverse: 40 m/min Spindle Speed: max. 12,000 rpm Power: max. 25 kW Tool magazine and table Tool magazine positions: 30 Table size (L × W): 900 × 500 mm EQUIPMENT Including chip conveyor Including slant bed filtration system Including zero-point clamping system Including 4th axis Rotamatik 120 New Däublin

Condition: used, Year of construction: 2008, x-travel 1020 mm y-travel 500 mm Ksdeuntnbepfx Abcslp z-travel 500 mm table surface area 1200 x 500 mm spindle taper SK 40 spindle turning speed - stepless 40 - 12.000 U/min spindle drive 18,5 kW feeds 0 - 20.000 mm/min rapid traverse 40 m/min ATC 30 Pos control HEIDENHAIN, iTNC 530 total power requirement 30 kW weight of the machine ca. 6,85 t - with coolant through spindle Accessories: 2 hydr. vices make HILMA, model NC 160, width of jaws 160mm; various tool holders, chip conveyor, coolant

Condition: used, Year of construction: 2022, operating hours: 5,403 h, functionality: fully functional, machine/vehicle number: 315D210043, travel distance X-axis: 712 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 515 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 25 kVA, torque: 108 Nm, controller manufacturer: Siemens, controller model: S828D, total height: 3,350 mm, total length: 2,720 mm, total width: 3,900 mm, table load: 200 kg, rotary table diameter: 410 mm, overall weight: 8,730 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 1,182 h, coolant supply: 3 bar, number of slots in tool magazine: 48, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, QUASER UX 500 C Siemens S828D 315D210043 including 10.4" screen with movable operator panel, tiltable and rotatable Software option: 3D simulation Software option: network drive management Main spindle SK40, suitable for standard holders and holders with face contact according to DIN 69871 Tool pull studs according to DIN 69872 (not included) Main spindle speed 12,000 rpm, 13.3 kW/85 Nm (S6-25%), direct-coupled, SC-4.2 Includes temperature-controlled cooling system Portable electronic handwheel Klodpfexwp E Uox Abcep Heat exchanger for electrical cabinet Double-arm tool changer with 30 magazine positions Pneumatically operated tool changer door Direct position measuring system on rotary axis Direct position measuring system on swivel axis Infrared receiver for workpiece and tool measurement Machine color: RAL 7035 Light Grey Coolant tank, spindle head, and doors: RAL 9005 Jet Black Three-color signal tower Coolant spray gun External air blast for dry machining Automatic central lubrication for ball screws Computer-optimized heavy machine base made of heavily ribbed cast iron Stable and rigid machine construction due to portal design Chip removal system, consisting of work area chip flushing with Grundfos pump 75 l/min at 3 bar, chip trays made of stainless steel, and 2 screw conveyors in the work area Full work area enclosure with 2 corner sliding doors and 2 work area lights Flood coolant system with 4 ring nozzles positioned at the spindle nose, supplied by Grundfos pump, 75 l/min at 3 bar Year of manufacture: 2022

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BT40 BIG PLUS - Spindle power : 26 [kW] - Spindle speeds : 15000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 560/640/640 [mm] - Rapid traverses rates (X/Y/Z) : 60 [m/min] B ROTARY AXIS - Travel : 360 [°] - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 60 PALLET CHANGER - Pallet changing device type : Rotopalette - Pallet size : 400X400 [mm] - Pallets number : 2 - Maximum weight upon pallet : 400 [kg] - Maximum workpiece diameter : 630 [mm] - Maximum workpiece height : 900 [mm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 4100X2300 [mm] - Machine height : 2720 [mm] - Machine weight : 11000 [kg] Klodpjuhbv Sofx Abcjp MACHINE HOURS - Number of working hours : 3700 [h] EQUIPMENT - CNC : Fanuc 31 iB Interface : Ethernet / RS232 / USB / PCMCIA - Electronic handwheel - Linear scales - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 25 [bars] * Coolant through spindle * With cabin washing - Chips conveyor : Arrière - Spindle cooling unit - Tool probe - Workpiece probe : Renishaw OMP60

Condition: ready for operation (used), Year of construction: 2000, Main Drive Number of axis 3 Spindle Speed 10000 RPM Movement X-Axis Movement 1000 mm Z-Axis Movement 600 mm Y-Axis Movement 600 mm Ksdpfxox Enkus Abcjlp This 3-axis Quaser MV 204 II was manufactured in 2000. It features a spindle speed of 10,000 rpm and a CNC control system by Selca 3045 PD. The machine includes a magnetic table measuring 630 mm x 400 mm and a tool magazine with 20 positions. If you are looking to get high-quality milling capabilities, consider the Quaser MV 204 II machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2002, General Data Measurements width 2650 mm Measurements depth 2220 mm Measurements height 2855 mm Machine weight 8200 kg Main Drive Spindle speed range 10000 rpm Spindle motor power 15 / 33 kW Kledpfx Abox D Scpecep Tool taper BT-40 Movement X-Axis Movement 700 Y-Axis Movement 590 Z-Axis Movement 480 This 5-axis Quaser MV 204 IIU/10 vertical machining centre was manufactured in 2002. It features a tilting spindle head with a range of ±110°, a spindle speed of 10,000 rpm, and a spindle motor power of 15/33 kW. The machine includes a 32-position ATC, chip conveyor, and internal coolant at 20 bar. Consider the opportunity to buy this Quaser MV 204 IIU/10 vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 1998, Quaser MV 204 incl. 4th axis dividing head Year of manufacture: 1998 Chip conveyor Info: Spindle and rotary union were replaced in 2022 and have only 400 operating hours. Control system: - Fanuc 18MC - Electronic handwheel Kedeykacropfx Abcslp Travel paths: - X: 1000 mm, Y: 600 mm, Z: 600 mm Main spindle: - SK 40 - Maximum spindle speed: 10,000 RPM - Spindle cooling Tool changer: - 20 magazine positions Availability: - Immediately Special features: - Machine is ready for immediate use. - Machine is available for prompt delivery. - Machine can be inspected and tested under power at the location. - Machine will be loaded onto truck free of charge. - Forklift for loading is available. - Transport can be organized upon request.

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 120J434, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 560 mm, controller model: FANUC 18 M, table width: 550 mm, table length: 1,200 mm, table load: 1,000 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 24, Table size 1200 x 550 mm Longitudinal travel 1020 mm Klsdpfxjymmh Te Abcep Cross travel 610 mm Vertical travel 560 mm Max. distance spindle to table 710 mm Max. load on table 1.000 Kg Spindle speeds 10.000 rpm Rapid movement 24 m/min Tool change 24 pcs Spindle taper ISA 40 Control FANUC 18 M Cycle hours 7100 Timer