Used Racking for sale (3,365)

Condition: excellent (used), Year of construction: 2022, total length: 3,600 mm, total height: 11,500 mm, load capacity per storage section: 2,000 kg, For sale: pallet racking by AR RACKING in excellent condition. 450 frames (11500x1100mm) and 4500 beams (3600mm), 2200kg per level. Fodpfx Agoxvqakefjga

Condition: used, Separator element for pallet racking system. Suitable for frames with depths of 1000, 1050, and 1100 mm. Arm length: 500 mm For a 2700 mm bay with 6 arms: 24 pcs – 67 EUR + VAT/piece For a 2700 mm bay with 10 arms: 46 pcs – 89 EUR + VAT/piece For an 1800 mm bay with 7 arms: 4 pcs – 51 EUR + VAT/piece If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking and accessories and are happy to assist you with your planning. Further accessories available upon request, including: Frame, corner, and impact protection, push-through protections, chipboard panels, wire mesh decks, rear mesh panels, and depth support bars. Shipping: Please inquire about shipping costs, specifying your postal code, location, and desired quantity. Additional services: Fgjdpek Tzzljfx Agfoa Planning, racking assembly/disassembly, purchase/sale Technical data, specifications, and prices are subject to change and errors. Subject to prior sale!

Condition: used, Year of construction: 2024, clear span: 2,700 mm, Racking system for sale Frame P90 6500x1100x90 – 356 pcs (60 EUR/pc) Beams 2700x100 (2400kg) – 1248 pcs (8 EUR/pc) Beams 3600x125 (2600kg) – 1820 pcs (12 EUR/pc) Frame Jungheinrich Esmena 6500x1100x85 – 116 pcs (55 EUR/pc) Beams 2700x115 (3000kg) – 674 pcs (9 EUR/pc) Beams 3600x115 (2400kg) – 576 pcs (12 EUR/pc) Fodpfju H Uzbex Agfjga Frame NEDCON 6500x1100 – 30 pcs (60 EUR/pc) Beams 2700x110 (3000kg) – 1152 pcs (9 EUR/pc) Beams 3600x130 (2800kg) – 480 pcs (12 EUR/pc)

Condition: excellent (used), Year of construction: 2023, 19-meter AR Racking pallet rack AR Racking pallet rack with a total length of 19,000 mm, consisting of one base bay and six extension bays (2,700 mm each). Each bay has three levels (including floor storage space) with four cross beams (2,700 mm). Each bay can store 3 Euro pallets side by side and 3 pallets stacked (including floor storage space). One bay can accommodate 9 Euro pallets. Fsdpoxq A Dwefx Agfega Manufacturer: AR Racking Type: ARPA-S Total length: approx. 19,000 mm Shelf height: 3,000 mm Shelf depth: 1,100 mm Clear bay width: 2,700 mm Grid spacing: 50 mm End upright frame height: 500 mm Number of storage levels: 3 (including floor storage space) Number of bays: 7 Shelf load: 3,000 kg Bay load: 6,000 kg Pallet spaces: 63 Year of construction: 2023 Uprights The frames consist of two omega profiles with their corresponding connectors, post feet, and fastening materials. The horizontal and diagonal struts are made of galvanized C-profiles. The perforation The omega profile has a 50 mm spacing for the crossbeams. Sendzimier-galvanized material Crossbeams Made of cold-rolled box profile Sturdy suspension bracket for a secure connection Including two locking pins per crossbeam to prevent accidental removal Powder-coated orange Scope of delivery: 6 x AR Racking pallet rack uprights, galvanized, 3000 x 80 x 70 mm 2 x AR Racking pallet rack uprights, galvanized, 3500 x 80 x 70 mm (end upright frame height: 500 mm) 28 x AR Racking pallet rack crossbeams, orange, 2700 x 160 x 50 mm 56 x Locking pins We also offer the shelf in a smaller version. Please feel free to contact us. You can find more items - new and used - in our shop! International shipping costs upon request!

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid constitutes an obligation for timely collection between 04.05.26 and 07.05.26. MACHINE DETAILS Dimensions & Weight Fgsdsyr R Tdepfx Agfja Dimensions (L x W x H): 900 x 800 x 230 mm Weight: 70 kg External reference: Lot 98

Condition: not inspected (used), functionality: unexamined, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time between 04.05.26 and 07.05.26. MACHINE DETAILS Fodpfjyr R Stjx Agfsga Dimensions & Weight Dimensions (L x W x H): 900 x 800 x 230 mm Weight: 70 kg External reference: Lot 97

Condition: not inspected (used), functionality: unexamined, total height: 2,800 mm, total width: 2,000 mm, total length: 12,000 mm, overall weight: 2,000 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Dimensions per storage shelf: 2,000 mm x 1,300 mm Number of pull-out shelves: 40 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,000 x 2,000 x 2,800 mm Weight: 2,000 kg External reference: Pieper - Lot 9 Fjdpfoyn I Nhox Agfjga

Condition: good (used), Pallet racking system with chipboard decking according to your needs. Frame height, frame depth, beam length is also according to your requirements. Send your enquiry and we plan your system accordingly. Fedpfxjd Duc To Agfjga

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 16, warranty duration: 12 months, SLIDING RACK FOR GLASS M80-16 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-16 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -16 Fjdpfjhbduzex Agfsga The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 254 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 15 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 14 400 kg Partitions inclination – left or right – depending on assembly Assembly time - 10 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-16 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty We also deliver our racks for glass to the EU countries and other countries.

Condition: good (used), Technical data for pallet rack frame: Racking system: META (Thyssen) Type: Multipal S Included in delivery: 01x pallet rack frame, used Material color: Sendzimir galvanized Frame type: SR 85|20 Profile dimensions: 85 x 75 x 2.0 mm Including horizontal and diagonal braces, frame protectors and base plates The frames are pre-assembled (bolted lattice construction) Height: 7,000 mm Depth: 500 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for collection only. Transport or shipping beyond self-collection is subject to additional costs, which can be requested separately depending on the delivery location and scope of delivery. Fjdpsyz Tczefx Agfsga

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 30, warranty duration: 12 months, Our company (EXPOGLASS®) manufactures machines, glass racks for the glass industry. Our offer includes a 321 x 255 pull-out glass rack. New product on request. Technical data : Number of drawers - 30 Size of panes - 2550 X 3210 for storage Load capacity of a single drawer - 1500 kg Loading space width - 80 mm Total storage width - 4460 mm Fgedpoh Uudvefx Agfea Orientation (tilt side of drawers) - universal (depends on assembly) Number of positioning rollers per drawer - 8, bearing-mounted Construction - modular (combinable) Material of the front wheel of the drawer - floor friendly polyamide Rear wheel of drawer - steel - turned, bearing-mounted, with double flange, running on steel track We export our products all over the world.

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 12, warranty duration: 12 months, The subject of sale is a warehouse for storing glass panes (321 cm x 255 cm) in boxes (12 x 2500 kg): glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. The magazine is in the form of sliding, slightly inclined drawers. Fjdpsf Sqf Usfx Agfjga Thanks to it, you can save up to 75% of space, because all the drawers are parallel to each other and separated by only 10 millimeters. We offer various dimensions and capacity versions, while after consultation, we are also able to produce a warehouse with various parameters, taking into account your individual conditions and wishes. The magazine is especially recommended for glass, stone, furniture and advertising companies, which care about the effective use of their space.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, SLIDING RACK FOR GLASS D220-10 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Our sliding racks have the form of slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack in various parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. D220-10 RACK TECHNICAL DATA Intended use – glass panes 321 cm x 255 cm in wooden boxes Possibility of storing single panes – YES Maximum box size – 345 cm x 275 cm Number of partitions – 10 The width of the storage strip for glass – 22 cm The length of the storage strip for glass – 395 cm The material on which glass is placed – steel supports coated with ash tree strips (5 pieces) Total height (A) – 335 cm Total width (B) – 368 cm Total depth (C) – 407 cm Space needed for the correct use of the rack – 29 m2 Requirements for the ground – smooth / levelled The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 full / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Fodpfohcipgsx Agfsga Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single drawer – 2 500 kg Permissible load-bearing capacity of the whole rack – 25 000 kg Partitions inclination – left or right – depending on assembly Assembly time - 7 hours The number of people required for assembly – 4 people Drawers – joined (in order to reduce transport costs) Loading the box with glass onto the drawer – gantry, forklift, HDS DOCUMENTS ATTACHED TO D220-10 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty This product is delivered in parts in order to minimise delivery costs. We also deliver our racks to the EU countries and other countries.

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, The subject of sale is a warehouse for the storage of glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. The magazine has the form of retractable, slightly inclined drawers. With it, you can save up to 75% of space, because all drawers are parallel to each other and only 10 millimeters apart. We offer various dimensional and lifting versions, however, after consultation, we are also able to produce a warehouse with different parameters, taking into account your individual conditions and wishes. The magazine is especially recommended to glass, stone, furniture and advertising companies, which care about the effective use of their space. Specification: Fjdpfxegfm Nms Agfoga Glass racking system 10 drawers for 321 cm x 255 cm glass. Load capacity per drawer is 1500 kg.

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 26, warranty duration: 12 months, SLIDING RACK FOR GLASS M80-26 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. Fgodpfxof S Hh Ts Agfoa We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-26 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -26 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 384 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 22 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 23 400 kg Partitions inclination – left or right – depending on assembly Assembly time - 8 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-26 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 10, warranty duration: 12 months, The subject of sale is a warehouse for the storage of glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. The magazine has the form of retractable, slightly inclined drawers. With it, you can save up to 75% of space, because all drawers are parallel to each other and only 10 millimeters apart. We offer various dimensional and lifting versions, however, after consultation, we are also able to produce a warehouse with different parameters, taking into account your individual conditions and wishes. The magazine is especially recommended to glass, stone, furniture and advertising companies, which care about the effective use of their space. Fjdjd Tamlspfx Agfjga Specification: Glass racking system 10 drawers for 160 cm x 250 cm glass. Load capacity per drawer is 800 kg.

Condition: good (used), Approx. 1,000 stacking racks for industrial pallets, galvanized, 1 ton load capacity, stackable up to 4 high – used -: Price per unit ex location: only €75 (net)! Price per unit for orders of 100 units or more: only €65 (net), ex location: Manufacturer: Reimuth GmbH Type: Grey Year of manufacture: 1992 Height: approx. 1.90 m Fgsdeyzc Awepfx Agfja Each rack consists of two frame parts (2 x an "L") assembled to form one industrial pallet rack. Assembly without screws, only with hinges. Permissible load capacity: 1 ton Permissible total stacking load: 4 tons Stackable, max. 4 high Hot-dip galvanized Sale without industrial pallet Condition: good Available: immediately Location: 73079 Süßen

Condition: good (used), Year of construction: 1999, Pallet racking, Stow, height approx. 12m, 850kg per pallet, 2.70m beams, approx. 13,470 pallet spaces – used –: Price ex location: only €169,500 (net), dismantled, packed, and loaded! Price for larger partial quantities: on request! Fgjdpfx Aoyzfvyogfoa Manufacturer: Stow Type: unknown, likely Pal Rack NS Year of manufacture: 1999 Number of frames: 458 pcs, of which 16 pcs are approx. 0.94m deep (these are the frames with transfer positions) Frame width: approx. 12cm Frame height: approx. 12.70m, top shelf at 12m Frame bracing: bolted Frame depth: approx. 1.05m Number of beams: approx. 8,064 pcs Clear beam length: approx. 2.70m Beam height: approx. 12cm Beam spacing: approx. 2.71m Height to first beam level: approx. 1.59m Max. bay load: 2,550kg = 850kg per pallet position Max. field load: 19,900kg Condition: good Available: from end of April 2026 Location: Bremen

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Fgsdsd Tbbdjpfx Agfja Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Fgjdpfx Agsmhhx Iefsa According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: Fgodpfsmhhyaex Agfea 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Fedpfx Ash Ek Dasgfoga - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Fgodpfxod Tqale Agfoa Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) Fedefdkb Uepfx Agfsga - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Fedpfx Agemidyfsfega Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.