Used Radiodetection Rd 400 for sale (68,870)

Condition: new, ELMAG universal lathe PREMIUM CU 400 RD - Vario center distance 1000mm incl. RÖHM lathe chuck Performance data and holders: - Turning Ø 325-1,320 mm, without bridge 440-1,500 mm - Turning size via slide Ø 190-940 x 6,000 mm - Drive motor: 2,200-22,000 W, 400 V, high torque - Lathe chuck holder: DIN 55027 - Quill holder: MK 3 - MK 6 Standard equipment: - RÖHM three-jaw lathe chuck Pjdpfst Hhbtox Ab Ierd - Quick-change steel holder set, 5-piece - Halogen machine lamp - Emergency stop button / zero voltage release - Chuck guard with safety switch - Tool slide with splash guard - Base frame / chip tray / splash guard - Tool set / operating instructions / CE Standards PREMIUM CU series: - Heavy gray cast iron machine bed, good vibration damping - Dismountable bridge - Prismatic guides - Hardened and precision-ground turning spindle, high concentricity, adjustable precision bearings - Smooth-running rotary spindle and feed gear with oil bath - Gear wheels made of chrome-nickel steel, hardened and precision-ground - Feed reversal circuit - Covered trapezoidal thread lead screw, hardened, precision ground - Tool slide with lock nut - Precise slide guides, adjustable - Solid tailstock with taper turning adjustment - Lathe accuracy according to DIN Special accessories: - SINO digital position indicator for 3 axes - Insert turning tool set 25 x 25 mm, 7-piece - 7-piece insert set, 25 x 25 mm - Grooving tool set incl. plates, 6-piece - Machine shoe Ø 160 mm, 8 pcs. on request: - Steady rest - Steady rest - Steady rest with ball bearing guide - Faceplate - 4-jaw faceplate chuck ADVANTAGES Rotary spindle and feed gearbox with quick-change elements Feed reversal Sliding protective cover Gear plate Halogen lamp Coolant pump Emergency stop button Rapid traverse motor Longitudinal slide TECHNICAL DATA Center width 1000 mm Center height 200 mm Turning diameter over bed 400 mm Turning diameter over slide 235 mm Turning diameter without bridge 550 mm Machine bed width 320 mm Cross slide travel 235 mm Top slide travel 110 mm Turning tool cross-section, max. 25x25 mm Lathe chuck holder DIN 55027 No. 6 Spindle holder (turning spindle) MK 6 mm Spindle bore 52 mm Speed range 1, infinitely variable 18 - 98 rpm Speed range 2, infinitely variable 48 - 265 rpm Speed range 3, infinitely variable 3: 144 - 790 / 4: 385 - 2120 rpm Longitudinal feeds (80) 0.015 - 0.6 mm/rev Transverse feeds (80) 0.0075 - 0.3 mm/rev Metric thread dimension (40) 0.25 - 7.5 mm metric modular thread (40) 0.0625 - 1.875 mm Inch thread, threads G (40) 120 - 4 G/' Inch modular thread, threads G (40) 480 - 16 G/' Quill holder MK 4 Quill diameter 50 mm Quill travel 100 mm Motor power 7500 W Mains connection 400/50 V/Hz Length (total) 2350 mm Height (total) 1330 mm Weight 1590 kg

Year of construction: 2021, condition: new, machine/vehicle number: TR0054_ALMRD400, NEW COMPRESSED AIR REFRIGERATION DRYER ALMIG ALM-RD400 Type: ALM-RD400 incl. 2 x air filters Delivery quantity: 6.25 m³ / min * Compressed air connection 1 1/2 " Dimensions L x W x H: 555 x 505 x 874 mm Weight: 86 kg * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 3 ° C Podjg Tvngopfx Ab Iord Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: new, turning length 850 mm turning diameter 400 mm swing diameter over bed slide 245 mm spindle bore 52.0 mm turning speeds 45 - 1800 U/min bed width 260 mm spindle taper DIN 55029 D 1-5 taper in tailstock 3 MK quill travel 120 mm total power requirement 3.0 / 4.5 kW weight of the machine ca. 1255 kg range L-W-H 1900 x 1000 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-200 mm / D5 - Clamping disk 320 mm - Fixed steady rest - passage diameter max. 130 mm - Follow-on steady rest - passage diameter max. 100 mm - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Micrometer longitudinal stop - Slip clutch - Motor with magnetic brake in accordance with CE standard - Initial filling with Shell Tellus 46 - Extendable chip tray - LED machine light - Change gears - Reduction sleeve - 2 centering points - Chip rear wall Pjdpfjxaaxwjx Ab Iord - Operating tool

Condition: used, Comprehensively tested, used Gardner type approximately 400 litre working capacity (product dependent) stainless steel ribbon blender. Trough measures approximately 1650mm long x 550mm wide x 700mm deep. Unit has a stainless steel lid and includes a bottom discharge valve. Specifications: Capacity: 14.1 ft³ Prodpfx Absxw Tdbs Ijd Material of construction: stainless steel Width: 21.65" Length: 64.96" Dimensions: 64.96 x 21.65 x 27.56

Condition: used, Technical details: diameter: 400 mm passage: 25 mm width: 58 mm revolution per minute: 1800 U/min weight of the machine approx.: 48 kg Power chuck, mechanical Pedpfx Abeu Nlpbe Ierd Features: Power flange AKS 315/5 Clamping range min./max.: 60/240mm Flange mounting size Ø 300x5mm inside; fastening 3x hexagon socket screws Ø 20mm and 3x holes Ø 20.5mm / pitch circle Ø 235mm Force tension 40kN Guide on one jaw is broken (see picture) *

Condition: used, -Semi-automatic round or square dough dividers from €1,490 - Semi-automatic dough divider with square bowl, 20 divisions; price: €1,490 - Semi-automatic round dough divider, 20 divisions, brand: Lambert; price: €1,990 - Semi-automatic round dough divider, 20 divisions; price: €1,990 - Semi-automatic dough divider, 24 divisions, brand: Bertrand Puma; price: €2,490 - Semi-automatic round dough divider, 24 divisions, brand: Bertrand Puma; price: €2,490 - Semi-automatic round dough divider, 20 divisions, brand: JAC; price: €2,490 - Semi-automatic square dough divider, 20 divisions, brand: PANIRECORD; price: €2,490 - Semi-automatic round dough divider, 20 divisions, brand: JAC; price: €2,500 - Semi-automatic round bowl dough divider, 20 divisions, brand: PANIRECORD; price: €2,500 - Semi-automatic hydraulic square dough divider JAC DIV 20, used, brand: JAC; price: €2,600 - Dough divider, 20 divisions, square DIVITRAD, brand: Bertrand Puma; price: €3,900 Predpfx Aoxvyymeb Ijd

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 110 mm, spindle speed (max.): 1,60,000 rpm, spindle speed (min.): 8,000 rpm, workpiece weight (max.): 250 kg, overall weight: 6,000 kg, travel distance W-axis: 400 mm, Hauser Coordinate Grinding Machine S35. Fully functional. Very good motors and additional accessories available. The machine is under power and can be inspected. Grinding trials can be arranged by appointment. U-axis in excellent condition. Positioning is highly precise. C-axis for contour grinding is available and fully operational. Control: Fanuc O-M The machine is in daily use and continues to be highly accurate. Fanuc components have been replaced over the last two years. Old parts have been exchanged for new ones. Pedpfsxp Hq Eox Ab Isrd Machine is being sold - > bought as seen -> "As is where is" - no manufacturer or seller warranty. Training on the machine and control system is possible at any time, either at our facility or on your premises. (We are also happy to assist with any further questions.)

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck type F 400 -Chuck size: Ø 400 mm -Bolt circle: Ø 235 mm -Adapter: Short taper 11 / cone 192 - 196 mm -Through hole: 111 mm -Dimensions: Ø 400 x 325 mm Psdpfx Absxdkmys Ijrd -Total weight: 138 kg

Condition: new, bore capacity in steel (diameter) 25.0 mm throat 180 mm bore stroke 80.0 mm morse taper 2 MK turning speeds 180 - 2270 U/min table-size 305 x 305 mm swivelling +/- 45 Grad T-slots 16.0 mm column diameter 72.0 mm voltage 400 V total power requirement 1.10 kW weight 57.0 kg range L-W-H 400 x 630 x 990 mm scope of delivery - Keyless chuck 1 - 16 mm / B 18 - Drill chuck arbor MK 2 / B 18 - Digital quill stroke display - machine light - Right-left rotation Pjdpfxexaa The Ab Ijrd - protective cover - Height-adjustable protective cover - T-nuts - operating tool

Condition: repair required (used), Year of construction: 1988, functionality: fully functional, Technical Data Voumard 400 CNC (POSSIBILITY OF A COMPLETE RETROFIT) Minimum grinding diameter: 20 mm Maximum grinding diameter: 300 mm Maximum grinding depth: 300 mm Maximum workpiece and steady rest length: 1500 mm Centre height: 300 mm Predpfx Ajxpf Ezob Ied Axis travel: - Longitudinal travel (Z-axis): 650 mm - Cross travel (X-axis): 150 mm Workpiece spindle: max. 1000 rpm B-axis: +2° / -20°, manual adjustment on workpiece head B1-axis: CNC-controlled turret spindle change Maximum axis speed (Z – X): 12,000 mm/min Grinding head 1: Grinder motor power 7 kW, 15,000 rpm Grinding head 2: Grinder motor power 7.8 kW, 12,000 rpm Machine weight: approx. 9,500 kg Machine dimensions: - Length: 5,000 mm - Width: 2,300 mm - Height: 2,400 mm New Siemens 840D SL control system

Condition: new, saw blade diameter: 400 mm, sheet thickness aluminum (max.): 4 mm, total length: 720 mm, total width: 760 mm, total height: 1,330 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 100 mm, rotational speed (min.): 3,000 rpm, rotational speed (max.): 3,000 rpm, The Gerd Wolff AC 400 is an automatic aluminium cutting machine, manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned producer in Turkey. Standard Equipment - Fixing points for 15° - 22.5° - 30° - 45° - 67.5° - Locking handle for securing at intermediate angles - Adjustable cutting speed for various profile types - Saw guard with safety switch - Belt-driven saw Psdpfxoxb Ur Ue Ab Ijrd - Two-hand safety operation - Easily replaceable saw blade - 2 pneumatic vertical cylinders with clamps - 1 compressed air gun Optional Equipment - Hydrocheck – Hydraulic speed regulation for aluminium profiles - Cooling system for cutting aluminium - Auxiliary conveyor with measuring rulers

Condition: good (used), Year of construction: 1988, spindle turning speed range 170 - 18000 U/min weight of the machine ca. 7,5 t dimensions of the machine ca. 5,00 x 4,00 x 2,20 m --> Control conversion (2014) to Siemens Sinumerik 840D Solutionline --> Overhaul of the new control system in 2016 --> Technical data Grinding diameter: 20 - 300 mm --> Oscillation diameter: 350 (500) mm --> Workpiece length: 300 (1300) mm --> Recommended grinding depth up to: 300 mm --> Grinding table stroke Z-axis (total): 650 (950) mm --> Resolution: 0.001 mm --> Rapid traverse: 12 m/min-1 --> Grinding stroke speed: 0 - 9.99 m/min-1 --> Feed rate: 0 - 99.99 m/min-1 --> Step feed value during reversal: 0 - 0.999 mm --> Grinding table stroke X-axis (total): 150 mm --> Resolution: 0.001 mm / Ø --> Rapid traverse: 5 m/min-1/R --> Grinding stroke speed: 0 - 5 m/min-1/R --> Feed rate: 0 - 99.99 m/min-1/R --> Step feed value during reversal: 0 - 0.999 mm / Ø Prodpfx Abow Intae Ijd --> Swivel capability of the workpiece headstock: --> B-axis: -32° (-23°) / +2° --> Resolution: 0.0001° (0.36") --> U-axis stroke (total): 300 mm --> Resolution: 0.001 mm / Ø --> Travel speed: 5 m/min-1 --> Centre height above workpiece table: 200 (300) mm --> Centre height above grinding table: 330 (430) mm --> Workpiece spindle passage: 50 (70) mm

Condition: new, Bernardo Universal Lathe Master 400 x 1000 incl. 3-axis Digital Readout Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder (factory installation – price: €672.00 net, not included in price) Centre distance: 1000 mm Centre height: 200 mm Swing over bed: 400 mm Swing over gap: 560 mm Swing over cross slide: 240 mm Bed width: 210 mm Spindle bore: 52 mm Spindle mount: DIN 55029, D1-5 Spindle speed range: (12) 45 – 2000 rpm Longitudinal feeds: (27) 0.06 – 2.78 mm/rev Cross feeds: (22) 0.01 – 0.72 mm/rev Metric threads: (36) 0.8 – 14 mm Inch threads: (30) 2 – 28 TPI Quill diameter: 45 mm Quill travel: 100 mm Quill taper: MT 4 Motor power: 2.0 / 2.4 kW Machine dimensions (W x D x H): 1860 x 800 x 1600 mm Prodpfxsgd Iags Ab Iod Approx. weight: 810 kg Scope of delivery: • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck DK11-200 mm / D5 • Faceplate 200 mm / D5, DIN 55029 compliant • Fixed steady rest – max. through diameter 90 mm • Travelling steady rest – max. through diameter 70 mm • Coolant system • Initial fill with Shell Tellus 46 • Removable chip tray • 320 mm face plate • Four-way tool post • Guard for four-way tool post • Safety slip clutch • Micrometer longitudinal stop • Thread chasing dial • LED machine lamp • Reducer bush • Change gears • 2 live centres • Foot pedal with brake function, CE compliant • Motor with magnetic brake as per CE regulations / operating tool set Special Accessories: Multifix quick-change tool post, 3 straight holders, 1 prism holder, factory installation (price: €672.00 net, not included in basic price)

Condition: good (used), Year of construction: 1985, Grinding depth 300 mm Height of centers 300 mm Cross movement of the grinding wheel head 150 mm Min. grinding diameter 20 mm Max. grinding diameter 300 mm Spindle head (U axis) 300 mm Workpiece spindle head (B-Axis) +/- 32° (-23°) +2° Max. table longitudinal movement 650 mm Machine weight approx. 7.5 t Psdpfx Abewrzzmo Ijrd

Condition: new, wheel diameter 250 mm grinding wheel size 250 x 25 x 20 mm turning speeds 2850 U/min voltage 400 V total power requirement 2.0 kW weight of the machine ca. 23.0 kg. dimensions of the machine ca. 600 x 290 x 300 mm Furnishing: - Heavy design and high quality equipment - ideal for professional use - Ideal for matting, polishing - up to mirror-smooth surfaces of various materials - with the help of optionally available polishing discs and polishing pastes - Lockable ON-OFF switch according to IP54 with undervoltage release - Including motor with copper winding for a long service life - Standard with rubber feet for vibration-free work - Very smooth running thanks to balanced rotor with quality ball bearings - Elegant machine body made from high quality die-cast - Suitable for polishing metal, plastic and non-ferrous materials Predpfxjxak H So Ab Ijd Scope of delivery: - Soft polishing pad - Hard polishing pad - Operating instructions in German

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck type F 400 without clamping jaws -Chuck size: Ø 400 mm Pedpewucrrefx Ab Ierd -Bolt circle: mm -Through hole: 102 mm -Total dimensions: Ø 400 x 125 mm -Weight: 90 kg

Condition: used, Year of construction: 2009, Technical details: rotor dia: 30-500 mm hobbing length: 500-1000 mm total power requirement: 80 kW weight of the machine ca.: 15 t Predpfx Abev Hrp Eo Ijd dimensions of the machine ca.: 3,6 x 2,5 x 3,0 m max. module: 8 Max. module Et milling = 12 Max. module hobbing = 12 Max. axial travel = 110 to 1100mm Max. cutter speed = 300rpm Max. cutter displacement tangential = -350 to -55mm Max. table speed = 100rpm Table drive: torque motor Filter system: chip conveyor is for magnetic materials, belt filter is for all suspended matter that floats in the oil Including milling mandrel *

Condition: new, Bernardo circular saw FKS 2000 Pro/ 400 V Technical specifications Table dimension 800 x 380 mm Format table 2000 x 270 mm Trimming length 2000 mm Max saw blade diameter 315 x 30 mm Max cutting height 90° / 45° 100 / 80 mm Cutting width at the parallel stop 1200 mm Table height 870 mm Table extension 500 x 310 mm Table widening 800 x 880 mm Boom table with roll 700 x 580 mm Speed Main saw blade 4000 rpm Speed scoring saw blade 5800 rpm Scribble saw blade 90 x 20 mm Podsd N Tagopfx Ab Ijrd Suction connection of 100 mm Engine power S1 100% 3.8 kW (5.1 hp) Motor recording power S6 40% 5.3 kW (7.2 hp) Voltage 400 V Machine dimensions (W x D x H) 2000 x 2900 x 1180 mm Weight approx. 280 kg Delivery • HM saw blade 315 x 3.0 x 30 mm / Z 40 • Pre-cut saw blade 90 x 3.0 x 20 mm / Z 12 • Saw blade protection hood with suction connection • Connection hose with Y-piece • Miter stop with eccentric tensioner • Miter stop • Trimming shoe • Table extension • Table widening • Parallel stop • Extendable telescopic stop • Stop flap with fine adjustment • Boom table • Sliding stick • Sliding handle • Operating tool Properties • Extendable telescopic stop (up to 2260 mm) mountable at the front and rear boom table, infinitely pivotable from 90° to 45° • Important performance feature: saw blade diameter 315 mm can also be used when the scoring unit is mounted • Large-sized work table and standard table widening for cutting

Condition: new, grinding width 32.0 mm max. dia. of grinding wheel 250 mm grinding wheel size 250 x 32 x 32 mm turning speeds 2850 U/min Grain size K 36 / K 80 engine output 1.5 kW voltage 400 V weight 30.0 kg range L-W-H 510 x 320 x 360 mm Prjdpfx Absxaa Aij Ijd scope of delivery : - Grinding disc K 36 - Finishing wheel K 80 - Spark protection on both sides - workpiece support

Condition: used, Bench grinder, bench grinder, pedestal grinder, pedestal grinder -Manufacturer: Cordia, double bench grinder type DOS 400 -Motor power: 2.2 kW -Speed: 1400 rpm -Grinding discs: Ø 400 x 50 mm Podpoldk Irofx Ab Isrd -Operating voltage: 380 volts -Dimensions: 720/520/H1210 mm -Weight: 207 kg

Condition: new, Band saw Bernardo HBS 400 NSchnittbreite: 410 mmSchnitthöhe: 260 mmSägeband dimension: 3345 x 25 x 0,6 - 3 ZpZSägebandbreite: 9,5 - 37 mmSchnittschwindigkeit: 420 / 840 m/minTisch dimension: 450 x 560 mmTable height: 890 mmSaw table inclination: -5 to 45°Suction connection: Ø 2x 100 mmMotor output power: S1 1002 kW (3.0 PS)Motor input power: S6 400 kW (4.0 PS)Voltage: 400 VMachine dimensions: (W x D x H)875 x 740 x 1740 mmWeight approx.132 kg Podpfsd Tcakex Ab Ijrd

Condition: new, turning length 1000 mm turning diameter 400 mm turning dia. in gap 560 mm spindle bore 52,0 mm turning speeds 45 - 2.000 U/min bed width 210 mm spindle taper 55029 D 1-5 taper in tailstock 4 MK quill travel 100 mm total power requirement 2,0 / 2,4 kW weight of the machine ca. 810 kg. range L-W-H 1.890x800x1.600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 90 mm - Follow-on steady rest - passage diameter max. 70 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light Psdpsxaau Sjfx Ab Ijrd - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake function according to CE - Motor with magnetic brake according to CE standard - Operating tool

Condition: used, Double bench grinder, bench grinder, column grinder, column grinder -Manufacturer: Cordia, double bench grinder type DOS 400 -Motor power: 2.2 kW -Speed: 1500 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 590/690/H1080 mm Prsdpfxsflw Aze Ab Iod -Weight: 246 kg

Condition: new, Band saw Bernardo HBS 460 N - 400 V Technical Specification Cutting width 465 mm Cutting height 280 mm Sawband dimension 3607 x 25 x 0.6 - 3 ZpZ Saw widths 9.5 - 25.4 mm Cutting speed 420 / 840 m/min Table dimension 480 x 630 mm Table height 970 mm Saw table inclination -5° to 45° Suction connection of 2 x 100 mm Engine power S1 100% 2.2 kW (3.0 hp) Motor recording power S6 40% 3.0 kW (4.0 hp) Voltage 400 V Machine dimensions (W x D x H) 1050 x 800 x 1950 mm Weight approx. 162 kg Delivery • Saw band • Longitudinal stop with magnifying glass • Miter stop • Drive wheels made of aluminium Pjdpsd N S Ursfx Ab Ierd • Ball-bearing saw band guide • Motor incl. brake • Sliding stick • Operating tool

Condition: new, bore capacity in steel (diameter) 32,0 mm throat 255 mm bore stroke 120 mm morse taper 4 MK table: 385 x 335 mm turning speeds 80 - 2130 U/min total power requirement 1,1 / 2,2 kW weight 125 kg range L-W-H 460 x 900 x 1730 mm Furnishing: - Surface-machined work table - Height adjustable via rack and hand crank - Ground base plate with T-slots for clamping high workpieces - V-belt drive with balanced drive pulleys for smooth running - Adjustable drilling depth stop for precise infeed of the quill - Powerful 2-stage motor, speed range from 80 - 2130 rpm - Direction of rotation switch for clockwise and counterclockwise rotation included in the scope of delivery - Cross line laser device for comfortable work - Compact, stable cast iron construction in a modern design - Stable and polished steel column, designed for heavy use Scope of delivery: Prjdexaaqgepfx Ab Ijd - Drill chuck arbor MK 4 / B 18 - Keyless chuck 1 - 16 mm / B 18 - Cam switch for right-left rotation - Cross line laser device - T-nuts - Height-adjustable protective cover