Used Benford 4000 for sale (2,408)

Condition: used, functionality: limited functionality, Year of construction: 2018, operating hours: 16,914 h, load capacity: 4,000 kg, lifting height: 4,040 mm, fuel type: gas, mast type: duplex, construction height: 2,855 mm, empty load weight: 6,300 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Lifting height: 4,040 mm Load capacity: 4,000 kg Load center: 450 mm Fork width: 150 mm Fork thickness: 50 mm Fork length: 950 mm Fork carriage width: 1,350 mm MACHINE DETAILS Mast type: Duplex Drive type: Internal combustion engine Power: 42 kW Speed class: 15 ISO class: ISO class 3 = 2,500–4,999 kg Front tires Tire type: Non-marking Outer diameter: 450 mm Kjdez Hvmnepfx Anisdu Tire width: 200 mm Tire condition: 0–20 % Rear tires Tire type: Non-marking Outer diameter: 680 mm Tire width: 255 mm Tire condition: 0–20 % Battery voltage: 12 V Battery type: Starter Battery year of manufacture: 2018 Unladen weight: 6,300 kg Overall length: 2,190 mm Overall width: 2,050 mm Operating hours: 16,914 h EQUIPMENT 3rd valve Rear work light Front work light Heater Full cab Air conditioning CE certificate Non-marking tires Seat heating 3-wheel design Seat Two-way catalytic converter 55-liter gas tank with indicator Blue Spot Large alternator, 90 A Air-suspended seat Footwell heater Note: The rear wheel motor is leaking.

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Kdodpfx Anezww R Sjieu

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Kdsdpfx Asz Snfpjniju

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Kjdpfx Anerfucqjijdu Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Canon imagePROGRAF GP-4000” large-format printer Item for sale: 1 x Canon imagePROGRAF GP-4000 with the following specifications: incl. roll unit incl. roll holder set incl. WT36-600 Not the right configuration? We can easily configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or discolouration). Kdjdpfx Ansz Et T Njisu The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. Kedpoz Snf Nefx Aniodu This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: good (used), Year of construction: 2020, operating hours: 17,000 h, functionality: fully functional, A shredder for waste processing in good condition is for sale. The system is complete (hydraulics, electrical components, and conveyor belt) and includes an additional shredding table. The machine can be inspected at any time. Kedez R Ttvjpfx Aniedu

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 9419257, total height: 2,500 mm, total length: 4,500 mm, total width: 2,200 mm, volume flow: 5,000 m³/h, type of input current: AC, overall weight: 600 kg, inner dimension height: 2,400 mm, inner dimension length: 3,800 mm, suction capacity: 4,500 m³/h, inner dimension width: 2,100 mm, input voltage: 400 V, space requirement height: 2,600 mm, space requirement length: 5,000 mm, Equipment: cabin, lighting, Selling a modular Straumann painting booth with few operating hours. Straumann painting booth (year of manufacture 2021) – in good condition Selling a modular Straumann painting booth with few operating hours. Equipment & Details: Dimensions: Filter area 1.50 × 1.50 m, with extension and booth Kodpfoz D Ifqox Anijdu Work area approx. 2.10 x 2.40 x 3.50 m Technology: Extraction wall, fan with frequency converter, lighting Filtration: 3-stage filter system and 1+1 double door with filter for the afterflow air Construction: SVZ sheet metal panels, screwed together, smooth interior, with 1+1 double door Condition: Good, well-maintained, easily disassembled, as shown in the pictures. Design and details as shown in the pictures. Disassembly by the buyer; exhaust pipes can be taken over. Please contact me if you have any questions or would like to arrange a viewing. => Disassembly and removal by the buyer => Free of charge, including painting equipment / pressure tank with spray gun, as shown in the pictures => All information without guarantee. Subject to prior sale. Used system: Sale excluding any warranty or guarantee.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating pressure: 280 bar, Rubber injection molding machine in very good condition, manufactured in 2020. Detailed Technical Data: Clamping Unit: Clamping force: 4000 kN Min. mold height: 100 mm Mold opening stroke: 750 mm Max. daylight between heating plates: 850 mm Design: vertical Closing direction: from the top Heating Platens: Platen size: 800 x 806 mm Heating power: 2 x 14 kW Injection Unit: Shot volume: 4000 cm³ Max. injection pressure: 2000 bar Screw diameter: 60 mm Screw length: 10 D Max. screw speed: 0-180 rpm Injection direction: from the bottom Hydraulic System: Variable pump and proportional valves for pressure and flow Hydraulic manifold for stroke control with shift valves Reservoir capacity: 250 l Operating pressure: 280 bar Electrical Equipment: The design of the electrical equipment complies with DIN/VDE standards 0100, 0113 Electrical cabinet protection IP 54 according to DIN 40050 Connected voltage: 3 x 400 V + N + PE Frequency: 50 Hz Connected load: 77 kW Motor capacity: 45 kW Rated heating power: 2 x 14 kW Kedpfxsz E N Ayo Anisdu Control voltage: 24 V DC Permissible temperatures: 0 - 40 °C

Year of construction: 2018, condition: used, Control system Okuma OSP P300L (OSP Suite, 15") MACHINE Number of axes: 2 Max swing over bed: Ø670 mm Max swing over cross slide: Ø480 mm Max turning length: 1500 mm Max turning diameter: Ø480 mm SPINDLE Spindle diameter, front bearing: Ø140 mm Spindle bore: Ø91 mm Spindle nose: JIS A2-8 Speed range: 42–4200 rpm Kdjdpfx As Aa At Ieniou Front spindle bearings: Roller bearings, axial angular contact ball bearings Torque: 700 Nm Spindle material: CrMo X-AXIS Travel: 300 mm Rapid traverse: 25 m/min Z-AXIS Travel: 1590 mm Rapid traverse: 30 m/min TURRET Type: V12, NC turret Number of tools: 12 Indexing time: 0.24 s/station Tool mounting: MQ TAILSTOCK Quill diameter: Ø100 mm Stroke: 1530 mm Taper: MT No. 5 MOTORS Spindle motor: PREX 30/22 kW (30 min/cont.) X-axis: BL 3.5 kW Z-axis: BL 4.6 kW MACHINE DIMENSIONS Height: approx. 2200 mm Floor space: approx. 4200 × 2400 mm Weight: approx. 8500 kg (standard machine) STANDARD EQUIPMENT - MQ turret, 12 stations (excl. tool holders) NC-controlled tailstock MT No. 5, live center MT No. 4 Coolant system with high-pressure pump Work light Fully enclosed chip and splash guard Chuck open/close via M-code and foot pedal ("double type") Manual Touch Setter Central lubrication (monitoring type B-1) Hand tools Built to IEC standard incl. CE marking and EMC - Conversational programming One Touch IGF-ME kit INCLUDED OPTIONS Spindle orientation Cutting load monitoring "Load monitor" for all axes and spindles Automatic door C1500, left + right Shower/flush coolant type B (M-code) Air blow for chuck and tailstock (quill) Hydraulic quill movement 60 mm, built-in quill MT No. 4 - Prepared extraction port - Absoscale for X- and Z-axis Turcuite for X- and Z-axis incl. "0.1 micron control" Steady rest SMW-Autoblok SLU-X 3.1 Ø20–165 mm with automatic tow-along positioning Grundfos pump 12 bar CR1-9 Cromar chip conveyor (hinged belt), chip discharge to the right

Condition: like new (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 100026053, pressure: 12 bar, temperature: 191 °C, production capacity: 4,000 unit/h, STEAM BOILER ICI CALDAIE SIXEN 4000 Kdedoxqffkopfx Anisu Capacity: 4000 kg/hour. Max Temp: 191.7 °C Pressure: 12 Bar Excellent condition, used for a short period, equipped with a system for 72-hour unattended operation. The complete boiler and water treatment system is sold at the advertised price.

Condition: excellent (used), functionality: fully functional, We are offering this very well-maintained Fasti PC 4000 pivoting bending machine, 3 m long, with a segmented die and a back gauge. Manufacturer: Fasti Model: PC 4000 Kjdpfxszxptbe Anijdu Condition: very good Year of manufacture: Category ID: 1470 Type ID: 1258 Machine type: Pivoting bending machine Part number: 7.0559 B For sale: 3 m sheet metal bending machine in good condition, with a back gauge and the option to mount the upper die as a segment. Various die adapters are also available. If interested, an upper tooling platform is also available for an additional 1,000 EUR to the machine price. If you have any questions or need more information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Control system: Siemens 840D-SL Tool positions: 160 Tool holder: HSK 63 Spindle speed: 10,000 rpm / 242 Nm Kodjz E Hxlepfx Aniodu Pallet size: 630 x 500 mm Number of pallets: 2 X-axis: 800 mm Y-axis: 800 mm Z-axis: 1000 mm Table load capacity: max. 1000 kg

Condition: used, Year of construction: 2019, functionality: unexamined, machine/vehicle number: S40-0051, type of input current: three-phase, input voltage: 400 V, working width: 3,210 mm, cutting width (max.): 3,210 mm, laser power: 400 W, type of cooling: water, laser type: CO₂ laser, laser source model: Firestar f400, Equipment: fume extraction, The system consists of: Kdedpezuyg Rsfx Aniou Trotec SP4000 C / New Textile – 400 W CO₂ laser cutting system Sigma C13 – Cooling unit for the laser system Aigner VENT Set SP 3000 – Extraction and ventilation unit ASCO BV – Unwinding and material feed system for roll goods JQS Querimat QSV – Cross-cutting unit with a cutting width of 2,500 mm Firestar – CO₂ laser source The system is currently located in Worms and was used in ongoing production until the plant was shut down. Since the machine is currently not connected to the power grid, a current functional test cannot be performed at this time. An on-site inspection is possible by arrangement. The system is offered in its current condition and with the components shown in the pictures.

Condition: good (used), functionality: fully functional, Year of construction: 2008, machine/vehicle number: 8070850, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: IPG Photonics GmbH, laser power: 4,000 W, laser wavelength: 1,070 nm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness brass (max.): 1 mm, sheet thickness copper (max.): 1 mm, overall weight: 420 kg, total length: 856 mm, total width: 806 mm, total height: 1,186 mm, Equipment: cooling unit, Technical Data Manufacturer: IPG Laser GmbH Laser Model: YLS-4000-S2-IHE Serial Number (SN): 8070850 Rated Voltage: 400V AC +-10% 3P/PE Frequency: 50/60 Hz Full Load Current: 80 A Fuses: 80A / 120kA Date of Manufacture: 08.12.2008 Wiring Diagram: G25-16-70820-4 Cooler Wiring Diagram: G25-16-61012-4 Certification: CE marking Wavelength: 1070 nm Wavelength Bandwidth: approx. 1070 nm – 1080 nm Rated Output Power: 4.0 kW Laser Class: Class 4 Power Control: 10% to 100% Typical Fiber Diameter (Delivery Fiber): Mostly 100 µm (micrometers) Kjdozc Hpvspfx Anisdu Upon request, transport and loading can be arranged throughout Europe for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase/Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Gjbn N Ay Dowza Dxogoil Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: used, total height: 3,200 mm, total width: 3,200 mm, total length: 8,000 mm, Year of manufacture: 1996 Empty weight: 26.000 kg Price: On request Bed Milling machine Bed Miller Model: CNC Manufacturer: Anayak Type: FBZ-HV-4000 CNC: Heidenhain Year: 1996 Bed-dimensions: 4500x800mm X-travel: 4000mm Y-travel: 935mm Z-travel: 1000mm Rotatable Fräsekopf Spindle-speed: 3000rpm Kjdpfx Aez R N Ddsnisdu Spindle-take: ISO 50 Incl. peripherals and documents Dismantled for transport Video available! Machine-dimensions: 8000x3200x3000mm Machine-weight: 26000kg - Year: 1996 - Documentation available: Yes - CE marking present: Yes - Serial number: 11676-FBZ - Drive system: CNC - Control system brand: Heidenhain - Number of axes [pcs]: 3 - X-axis travel [mm]: 4000 - Y-axis travel [mm]: 935 - Z-axis travel [mm]: 1000 - Table length [mm]: 4500 - Table width [mm]: 800 - Tool holder: ISO50 - Max. spindle speed [rpm]: 3000 - Transport dimensions: 8000mm x 3200mm x 3200mm (l x w x h) - Transport weight [kg]: 26000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2019, Technical details: voltage: U1: 400V V open-circuit voltage: 70 V weight of the machine approx.: 100 / Gerät kg dimensions of machine: ca. 0,85 x 0,37 x 1,25 pro Gerät m 4 Fronius TransPuls welding systems available Can be used for industrial applications, e.g. robots. Areas of application: Welding process “CMT”, for all MIG/MAG welding work mobile, 4 wheels / 2x of which swivel with wire feed type: VR 7000-CMT: Wire feed speed 0.5 - 22 m/min; use of possible wire Ø 0.8 - 1.2 mm RCU5000i univoSD remote control 1 meter intermediate hose package Trolley Protection class IP 23 AF cooling type Operation via display RCU 5000i i.D. * Kdsdpfx Ansu Nwhijiju

Condition: used, Year of construction: 1995, machine/vehicle number: 20373, functionality: unexamined, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, overall weight: 127 kg, table height: 850 mm, Equipment: CE marking, saw blade guard, Scheppach table saw TS 4000, max. cutting height 90 mm, at 45° max. 60 mm, max. saw blade diameter 315 mm, adjustable from 0° to 45°, motor 4 kW (5.4 hp), sliding table 2,000 mm, lifting and traversing mechanism, foldable table extension, miter gauge, SUVA saw blade guard, Kdsdpfoy N Sfqex Anieu GS-certified for wood dust with CE marking, ex works, as inspected at the Seevetal location, excluding transport, subject to prior sale.

Condition: like new (used), Year of construction: 2015, functionality: fully functional, We offer this as new MHM SPM 4000 12Z08 70x100 screen printing machine, year of manufacture 2015. Kdsdoy I Iz Eepfx Anisu If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2023, operating hours: 700 h, functionality: fully functional, machine/vehicle number: 3617, Model/Type: RUF 15/4000/70 Machine No.: 3617 Year of construction: 2023 Drive motor: 15 kW Throughput capacity up to max.: 450 kg/h (depending on material) Pressing pressure: approx. 4000 kg/cm² Briquette size: 70 mm Ksdpfxet Sgrze Aniodu Running hours: approx. 700 h Warranty: 12 months after delivery Availability: approx. 8 weeks after receipt of down payment Details: + Siemens TP 700, Siemens S7-1200 + Hopper extension with grid + Electrical emulsion pump + Spraying device + Inspection door in hopper

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,600 mm, Travel ranges: Longitudinal (X): 4000 mm Kdsdpjzi S E Ujfx Aniju Vertical (Z): 1600 mm Lateral (Y): 1300 mm Rotary table: Diameter: 1600 mm Maximum speed: 250 min⁻¹ Drive power (100% duty cycle): 53 kW Maximum transport load (positioning): 8000 kg Maximum transport load (rotation): 3000 - 8000 kg Work table: Length: 4000 mm Width: 1240 mm Height of work table: 760 mm Automatically indexing milling head: Tool interface: ISO 50, DIN 69871 AD Automatic tool clamping: Clamping force 20000 N Spindle speed range: Spindle speed: 20 - 5000 min⁻¹ Full power from 340 min⁻¹ Torque at 32 kW/S1: 900 Nm Main drive: Drive power: 43 kW Maximum rapid traverse rate: X-axis 45000 mm/min Y- and Z-axis 35000 mm/min Maximum feed force: X, Y and Z-axis 16000 N Automatic tool changer Magazine positions in M version: Maximum tool positions: SK 50 40 positions Maximum tool positions: Capto C8 20 positions Machine weight: approx. 32,100 kg Equipment: - Work table 4000 x 1240 x 760 mm with integrated rotary table Ø 1600 mm - Swiveling control panel with telescopic arm with HEIDENHAIN TNC 640 HSCI (6 axes + spindle) control, including 19" flat screen, metallic keyboard with integrated mouse and USB interface on the control panel. Processor speed 0.5 ms including HEIDENHAIN smarT.NC. - Interpolative turning with HEIDENHAIN TNC 640 HSCI consisting of CAM system, HEIDENHAIN postprocessor, software adaptation for C-axis (spindle). - Portable electronic hand-held unit HEIDENHAIN HR 520 with 5 m cable. - Automatically indexing milling head / 2 levels with 2.5° x 2.5° division and a tool clamping force of 20,000 N (H200), 32 kW / 900 Nm, tool interface ISO 50 - DIN 69871 AD. Mounting flange with Hirth gearing for adapting turning tool holders, grinding spindles or additional milling heads and a protective ring to cover the Hirth gearing; not required if H205 is selected. - Spindle drive 43 kW at 100% duty cycle via water-cooled HEIDENHAIN inline motor with direct power transmission. The motor is integrated into the milling slide. - Turning tool holder with Capto C8 interface (manual tool clamping) for turning operations incl. Hirth gearing and SK 50 interface according to DIN 69871 AD for adaptation to SORALUCE milling heads. (Semi-automatic changing with additional manual fastening by 8 x M8 screws); not required with fully automatic changing of the turning tool holder. - Pneumatically adjustable pick-up station (travel 500 mm) in the tool changer area for the turning tool holder and protective ring for semi-automatic changing. - Work table with integrated NC rotary table Ø 1,600 mm, for turning operations and for positioning operations with hydraulic clamping. - Rack and pinion drive in the X-axis via two servomotors controlled in a master-slave process.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Mixer / Paddle mixer with twin shaft, CO2-cooled with vacuum and pump, equipped with a box lifter for pallet containers, capacity 4000 litres Mixer / Paddle mixer with twin shaft, vacuum-cooled, manufactured by Seydelmann, fitted with Oslos lifter for pallet boxes, Model PV 4000 Machine number: 11423-1 Year of manufacture: 2011 Voltage: 400 V, 50 Hz, 125 A Power: 60 kW Weight: 6500 kg Dimensions: 4250 mm x 2300 mm x 2750 mm. Lifter Brand: Oslos Model: Column Loader 1000S Serial number: E0112707705119/9002 Kdjdpfx Aowxmv Noniou Year of manufacture: 09/2021 Voltage: 380 V, 3 Ph, 50 Hz, 5.2 A Power: 2.2 kW Lifting capacity: 1000 kg Lifter dimensions: 700 mm x 2600 mm x 4200 mm Lifting arm dimensions: 1750 mm x 1600 mm x 1250 mm

Condition: used, functionality: fully functional, mileage: 95,077 km, power: 130 kW (176.75 HP), first registration: 12/2003, empty load weight: 7,040 kg, overall weight: 9,500 kg, color: blue, gearing type: mechanical, Year of construction: 2003, operating hours: 1,843 h, Equipment: air conditioning, This 177 hp UNIMOG is ideal for conversion into a motorhome. The rear cabin is well-suited as a base for a living cabin. A roof rack provides additional storage space. The existing winch can be used as a self-recovery winch. 1 used UNIMOG 4000 • Internal number 3797 • First registration: 12/2003 • Mileage: approx. 95,077 km • Operating hours: approx. 1,843 Kdsdpfxsz Dgndj Anieu • Power: 130 kW/177 hp • Unladen weight: 7,040 kg • Gross vehicle weight: 9,500 kg • Walk-in workshop container body • Towing capacity: 5 tons • Front winch • Electrical system: 24 V • Hydraulics: single-circuit (open circuit) • Auxiliary gearbox with work group Offer is subject to change. Errors and omissions excepted.

Condition: used, Year of construction: 2024 Applicable material: Manure Kdsdsz S Dfdjpfx Aniju

Condition: good (used), Year of construction: 1989, functionality: fully functional, Sheet metal width: 4050 mm Sheet metal thickness: 4 mm Kdjdpfsz I Ttnex Aniju Machine weight (approx.): 9,000 kg