Used Raypath Germany for sale (11,280)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 60,737 h, Control Unit Brand RÖDERS Model RMS 6 V3.6 Main Drive Number of axis 3 Movement X-Axis Movement 760 mm Y-Axis Movement 550 mm Z-Axis Movement 300 mm Ibsdjxn Dmzopfx Aabsc This 3-axis Roders RFM 760 vertical machining centre was manufactured in 2005. It features a spindle speed range of 3,000 to 42,000 rpm and travel paths of 760 mm in X, 550 mm in Y, and 300 mm in Z. Equipped with Röders RMS 6 V3.6 control, it offers precise machining capabilities. If you are looking to get high-quality milling capabilities, consider the Roders RFM 760 machine we have for sale. Contact us for further details regarding this machine. Application Types Milling

Condition: used, Second hand line by TANG OG WEISS AS (DK) for packaging liquids into plastic bottles. Volume range from 50 ml to 750 ml. Iodpexiv E Esfx Aabjbc Working output of line: - for bottles volume 750 ml - up to 600 pcs/h - for bottles volume in range from 200 up to 400 ml - in range from 800 - 900 pcs/h, - for smaller volume bottles it is possible to assume a capacity in the range of 1000 to 1200 pcs/h. The line consists of: - Container of bottles produced by PACKFEEDER S.L. (Spain) model MN 100-4, - Filling-closing unit manufactured by TANG OG WEISS AS (DK) model TWKS. It includes filling module by TANG OG WEISS AS model TWRF, with two filling nozzles, stainless steel buffer tank with total volume 15 l, rotary table, caps feeder, arm for capping/cap tapping and plate conveyor, - Stainless steel lobe pump manufactured by SSP PUMPS (England) model L2-0017, for feeding the product to the buffer tank, - Labelling unit, by EME Etiketteringsmaskiner ApS. (Denmark) model 4-120 (4000 series) without printer, equipped with a plate conveyor, two pieces of self-adhesive label applicators (front and back of the packaging). Label feed height range: from 20 mm to 120 mm, label feed width range: from 10 mm to 250 mm, operating speed: 0-40 m/min, - Automatic packaging machine in heat-shrinkable film by SKINETTA PAC-SYSTEME GMBH & CO. (Germany) model ASK 450. The device wraps packages of 6 bottles with film and thermoform it. The entrance opening to the foil shrinking section has the following dimensions: width 440 mm, height 320 mm (year of manufacture 1994, no documentation), - Plate conveyors and control panels. The equipment includes a cabinet with formats for oval bottles with volumes: 50 ml, 200 ml, 400 ml, 750 ml, as well as manufacturer's documentation in Danish and a user manual in Polish. The line was produced in 2007.

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Iodpfew Tt R Ijx Aabobc Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: excellent (used), Professional drill chuck with SK40 / ISO40 taper, compliant with DIN 69871 A standard. Manufacturer: EROGLU Präzisionswerkzeuge (Germany) – high-precision manufacturing. Model: 03180PB05553 (3/16-IK). Maximum tightening torque: 20 Nm – ideal for drilling and tapping with controlled force. Version with internal cooling (IK – Innenkühlung). Chuck with torque adjustment + / –, allowing protection of tools and workpieces. Solid and durable industrial design – suitable for use in CNC machining centers and conventional machines. Condition: used, in very good technical condition – ready for immediate use. ✅ German quality – precision industrial-grade drill chuck ✅ Ideal for production and workshop applications. Ibsdpfjxlcz Sjx Aaboc

Condition: used, Year of construction: 2022, Technical data: Process: 2-stage Filter surface area: approx. 17 m² Separation efficiency: >99% Welding fume separation class: W3 Extraction capacity: 1100 m³/h Extraction arm diameter: 150 mm Extraction arm length: 3 m Power supply: 3 x 400 V Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (approx.): 785 x 730 x 950 mm Weight (approx.): 106 kg Features: - Made in Germany Ibjdpfx Aaexbflreboc - Suitable for low to medium amounts of smoke/dust - Suitable for occasional to frequent use - Convenient filter replacement via service door - Extraction hood rotatable and pivotable by 360 degrees Equipment: - 3 new replacement main filters (approx. €330 each, new) - 7 new replacement pre-filters - 2 extraction hoods (one unused)

Condition: new, Year of construction: 2024, workpiece weight (max.): 12 kg, - Weight approx. 11.8 kg - CNC manufactured from A 600, anodized surface - Working range up to 506 mm diameter - No additional material movements, saving crane capacity, man hours and energy energy are saved If machines are in use, you have to crane to the machine and then back again Ibsdpfxeri Sice Aaboc to the picking area - the time lost for 2 centering holes alone is immense. - Ready for use in seconds - Stepless clamping, 3 diameter ranges - Produce a centering hole in seconds (directly after sawing on the machine) - All components are manufactured in Germany - Centering Din 333 Form A, 60°, 5, 6.3 and 8 mm. Other requests are also possible. A "must have" for every steel dealer! - Selling price: 5.950,- EUR net plus VAT ex stock, freight free within Germany - Scope of delivery: Fixture, Fein cordless drill, charger, - 2 rechargeable batteries - complete in case - 3 centering drills 5, 6.3 and 8 mm Din 333 A with surface, incl. 3 holders, one 6 m

Condition: used, Year of construction: 2022, operating hours: 240 h, 2022 | GIANT G2700 X-tra HD with loader bucket and palletfork | Used Wheel Loader | 240 hours 📍Location: Germany, Bonn 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 38400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 54 inspection points 52 approved ✅ 0 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Very good condition 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39514 Equippo" is commonly used when looking up more details online. Ibjdpfxjxntixo Aabec 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2012, condition: ready for operation (used), This MILLUTENSIL Mil 303 hydraulic press was manufactured in 2012. It features a usable table of 3000 mm by 2000 mm, with a maximum load capacity of 30,000 kg on the upper table and 70,000 kg on the lower table. The press operates with a total power of 31.1 kW and offers adjustable hydraulic pressure up to 240 bar. Consider the opportunity to buy this MILLUTENSIL Mil 303 hydraulic press. Contact us for more information. Application Types Bending Iedpexnr Dhofx Aabebc

Condition: excellent (used), For sale: Complete Waldmann & Weigl ER-220 electrical discharge machine, designed for precise removal of broken drills, taps, and cutting tools. Professional workshop solution from Germany, ideal for toolrooms, service shops, and mechanical workshops. • Manufacturer: Waldmann & Weigl GmbH, Germany • Model: ER-220 • Power supply: 220 V / 50 Hz • Working current: 1.5 A • Electrode range: from Ø1.0 mm to Ø10 mm (copper, tubular) • 6-stage erosion voltage adjustment (from gentle to intensive burning) • Electrode holder with height adjustment • Cooling pump with water tank • Control panel with operating mode selection • Complete documentation in German (original manual) • All components mounted on a mobile workshop table with castors. The machine is fully operational, complete, and ready for use. Indispensable for fast and safe removal of broken tools from workpieces without risk of damaging the component. Iedpfxow Syyye Aabebc

Condition: used, Year of construction: 2014, operating hours: 292 h, 2014 | Genie GS-2032 (8 m) | Used Scissor Lift | 292 hours 📍Location: Germany, Kulmbach 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Iodpsxntifjfx Aabjbc 👷‍♂️ Inspected by an independent expert 25 inspection points 25 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine in good, working condition. No issues were identified during the inspection. The battery is older, and was working for the duration of the inspection. It could not be verified if the batteries still sufficiently hold their charge for normal application or if new batteries should be fitted. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38263 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2002, condition: ready for operation (used), Control Unit Brand SIEMENS Model Sinumerik 840 D Ibjdoxnr Imepfx Aabjc This GEIBEL & HOTZ RS 2000 CNC cylindrical grinding machine was manufactured in 2002. It features a center height of 230 mm, a center width of 2000 mm, and a maximum grinding diameter of 355 mm. Equipped with Siemens 840 D control, it has a drive power for the external grinding spindle of 9 kW and an internal grinding spindle of 2.2 kW. Total weight is 10000 kg. Contact us for more information about this machine. Application Types Grinding

Condition: used, Year of construction: 1998, 1998 | Mercedes-Benz Unimog 418/10 | Used Commercial Vehicle - Tipper | 79559 kms 📍Location: Germany, Falkenstein/Vogtland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 24800 or Make an Offer. Ibodpfoxntg Dex Aabsc Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 37 inspection points 23 approved ✅ 14 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The vehicle has significant signs of use. The cab is heavily corroded 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "32555 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: ready for operation (used), Year of construction: 2010, Main Drive Number of axis 3 Ibjdpjxnr I Hofx Aabsc This 3-axis GEHRING L2-630 vertical honing machine was manufactured in 2010. It features a 6-station rotary table, two honing stations, two measuring stations, and a brushing station. Fully automated with a robot feeder, consider the opportunity to buy this GEHRING L2-630 vertical honing machine. Contact us for more information. Application Types Honing

Condition: ready for operation (used), Year of construction: 2018, operating hours: 1,843 h, General Data Machine weight 2600 kg Control Unit Brand SIEMENS Main Drive Spindle speed range 20–15000 Number of axis 5 Movement Ibodpoxnr I Tefx Aabec X-Axis Movement 650 mm X-Axis Rapid Traverse 42 m/min Y-Axis Movement 520 mm Y-Axis Rapid Traverse 42 m/min Z-Axis Movement 475 mm Z-Axis Rapid Traverse 42 m/min Tools Type of tool holder SK40 This 5-axis DMG MORI DMU 50 3rd Gen was manufactured in 2018. It features a spindle speed up to 15,000 min−1, a 30-place SK40 tool changer, and a CELOS control system with Siemens 840D sl Operate. The machine includes a swivel rotary table with a clamping surface of D630 x 500 mm and a 360° rotary axis. Consider the opportunity to buy this DMG MORI DMU 50 3rd Gen vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand FANUC Model 18i MB5 Movement X-Axis Movement 800 Y-Axis Movement 500 Z-Axis Movement 550 Additional Equipment Approx. 20 tool holders included Bar loader short Knoll paper belt chip conveyor HL450/900 Isdpfxoxnr Efe Aabobc This 5-axis CHIRON Mill 800 was manufactured in 2007, featuring a swivel head, bar loader, internal cooling, and a Knoll paper belt chip conveyor. Equipped with a Fanuc 310i-model A5 and HSK-a-63, it includes about 20 tool holders. Consider the opportunity to buy this CHIRON Mill 800 turn-mill centre. Contact us for more information about this machine. Application Types Milling

Year of construction: 2016, condition: ready for operation (used), General Data Measurements width 2435 mm Measurements depth 2335 mm Measurements height 2635 mm Machine weight 4020 kg Movement X-Axis Movement 600 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm Workpiece Workpiece weight 1000 kg Media Isdpjxnr Ndofx Aabjbc Air pressure 0.65 MPa Additional Equipment Features: 10-year warranty on positioning accuracy, LN Professional, Cooling unit for linear motor, Glass scales (X, Y, Z axes), Remote control, USB port, Shuttle ATC, C-axis (SEC-10), SGF generator unit, 15" TFT touchscreen, Dielectric cooling unit, Automatic voltage stabilizer, Paper filters (2), Fire extinguisher, Mouse, LAN port, Work lighting This Sodick AD 55 L die-sinking EDM machine was manufactured in 2016. It features a work tank with internal dimensions of 1200 x 800 x 500 mm and a capacity of 470 liters, supporting a maximum workpiece weight of 1000 kg. Equipped with a cooling unit for the linear motor, a C-axis, and a SGF generator unit, it offers robust performance for precision applications. Contact us for more information about this machine. Application Types EDM

Year of construction: 2001, condition: ready for operation (used), This HEESEMANN BÜRKLE wood production line was manufactured in 2001. It features a comprehensive oil application line, including RBO vacuum feeding Tornado SC 1300, HEESEMANN MFA 8 with cross-lengthwise brushes, and BÜRKLE SLC 1400 roller application machines. Enhanced with a new Siemens control system in 2024, consider the opportunity to buy this HEESEMANN BÜRKLE wood production line. Contact us for more information. Ijdpfx Aaoxnr Hpsbjbc Application Types Complete Production

Year of construction: 2003, condition: ready for operation (used), Main Drive Spindle speed range 1500–18000 Tool taper HSK F63 Number of axis 4 Tools Max weight 6 kg Iodpfjxnr H Aex Aabobc Max tool length 200 mm This 4-axis HOMAG PROFI BAZ20/30/16/V/D was manufactured in 2003. It features a Homatic CNC control, WOODWOP CNC programming, an 18-position disk changer, and a main spindle with a 12 kW three-phase motor. Capable of handling workpieces up to 3000 mm in length and 1400 mm in width, it includes a continuous table with adjustable vacuum clamps. Consider the opportunity to buy this HOMAG PROFI BAZ20/30/16/V/D CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2013, Main Drive Number of axis 3 Main Drive Number of axis 3 Ibodpfx Aoxnr Iyjabec This 3-axis GEHRING L2-630 was manufactured in 2013. It features a 6-station rotary table, including 2 honing stations, 2 measuring stations, and 1 brushing station, all automated. Ideal for precision honing applications. Contact us for more information. Application Types Honing

Condition: ready for operation (used), Year of construction: 2006, operating hours: 12,965 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 6000 (-15000) Tool taper SK 40 (HSK-A63) Number of axis 5 Movement X-Axis Movement 2940 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 700 mm Y-Axis Rapid Traverse 30 m/min Z-Axis Movement 850 mm Z-Axis Rapid Traverse 30 m/min C-Axis Movement +/-100º Table Table load 1200 kg Tools Slots in storage 36 Max tool diameter 85 (with adjacent free slots 135 mm) Max tool length 400 mm Iodpfx Aaoxnr Itobjbc Additional Equipment Machines comes with C-axis and a +/-100º b-axis head. This 5-axis AXA VHC 3-3000 S was manufactured in 2006. A universal machining centre, it offers robust capabilities for diverse machining tasks. Ideal for those seeking reliable performance in a used machine. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2009, Main Drive Number of axis 4 This 4-axis HELLER MCH 250 was manufactured in 2009. A horizontal machining centre with a voltage of 400 V, frequency of 50 Hz, and a rated current of 123 A. If you are looking to get high quality milling capabilities consider the HELLER MCH 250 machine we have for sale. Contact us for more information. Ibedpfxsxnr D Ij Aabjc Application Types Milling

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 700 kg This 3-axis SAMAG MFZ 2-2 was manufactured in 2007, featuring a line voltage of 400V, frequency of 50 Hz, and a control voltage of DC 24 V. With a power consumption of 72kW and a weight of 700kg, it includes optional 3D data of the clamping tower. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information about this machine. Ijdpfx Aexnr Elsabebc Application Types Milling

Condition: ready for operation (used), Year of construction: 2006, operating hours: 2,925 h, General Data Machine weight 725 kg Main Drive Spindle speed range 200–3000 rpm This Sunnen ML 2000 was manufactured in 2006. It's a horizontal honing machine featuring a diameter range of 1.5 – 165 mm for manual stroke and 1.5 – 95 mm for automatic stroke. Stroke length reaches up to 170 mm. It operates with a spindle speed variable from 200 to 3000 rpm and includes a 7.5 kW spindle motor. The machine weighs 725 kg and requires approximately 3.5 m² of space. Contact us for more information about this machine. Application Types Ibodpfjxnr Hcex Aabsc Honing

Condition: ready for operation (used), Year of construction: 2006, General Data Machine weight 700 kg Ibedpfx Asxnr D Uoabec This SAMAG MFZ 2-2 was manufactured in 2006. A robust horizontal machining centre, it features a power rating of 72 kW and operates on a 400V mains voltage with a 50 Hz frequency. Weighing 700 kg, it includes optional 3D data for clamping towers and spare parts. Consider the opportunity to buy this SAMAG MFZ 2-2 horizontal machining centre. Contact us for more information. Application Types Milling

Year of construction: 2020, condition: ready for operation (used), General Data Measurements width 1300 mm Measurements depth 2450 mm Measurements height 1900 mm Control Unit Brand SIEMENS This LAFRANCONI LM 400 die bending machine was manufactured in 2020. It features a NC roller feeder, a max stroke rate of 350 1/min, and a material width capacity of 60 mm. The machine operates with a 20 KN center ram force and a 45 mm stroke. Powered by a 10.6 kW asynchronous spindle motor, it adjusts from 20 to 350 rpm. Dimensions are approximately 2450×1300×1900 mm. Contact us for more information about this machine. Iodpfoxnr Erex Aabjbc Application Types Bending