Used Eisen Und Hammerwerk Gmbh for sale (83,387)

Condition: good (used), Year of construction: 2021, functionality: fully functional, With the stretchMASTER 6000, you can straighten steel bars up to 6 meters in length. The processable cross-sections are: round steel 6 – 30 mm, flat steel 4 – 12 mm as well as 12 – 60 mm, and square steel 8 – 25 mm. The machine can be inspected by appointment. Iodpfoxyxkrjx Ab Ija Delivery is available at an additional charge.

Condition: used, tank capacity: 1,000 l, GENERAL Equipment: Disc valve Design: Container Remarks: Container sits loose in a 4-legged V2A frame; cone height approx. 600 mm; manhole diameter approx. 620 mm; container with minor dents Internal diameter: 1,250 mm Total height: 1,550 mm Support type: Frame Location: Bremen Volume: 1,000 liters Product contact material: V2A 1.4301 (AISI304) Condition: Used Cylindrical height: 490 mm Last intended use: Pharmaceutical Iedpfx Aboxqdtgo Isa VESSEL Bottom: Conical bottom EQUIPMENT Manhole / Dome: In the top head Outlet (alternative input): 200 mm

Year of construction: 1980, condition: ready for operation (used), Guillotine shear by Eisen u. Hammerwerk G.m.b.H., capacity: 10mm, working length: 3000mm, year of manufacture: 1980. An inspection can be arranged by appointment. Iodpfx Aoxt Rk Deb Isa

Condition: good (used), functionality: fully functional, A fuel transfer device is being offered for sale. Inspection possible by appointment. Manufacturer: GL GmbH Metall- und Werkstattechnik − Model: 100/100 S − Serial number: 3448 − Year of manufacture: 08/2017 − Technical data: > Tank capacity: 100 litres > Delivery rate: 15 l/min > Weight: 92 kg > Fill level indicator: visual > Mobility: mobile > Switching suction/return filling: Single-lever operation/ball valve > Tank change: manual Iodpfx Aext H Iljb Ija

Year of construction: 2008, condition: good (used), functionality: fully functional, Bio-Circle Parts Washer For active environmental protection Color: green/grey The ultimate cleaning workstation – Parts Washer is in good used condition. Protective base made of stainless steel perforated sheet The Bio-Circle washer – compact cleaning table uses an electrically operated pump to deliver cleaning fluid to the 3-way valve. Depending on the position of the 3-way valve, the cleaning fluid can be delivered to the hose with washing brush, including a tray for the work surface with flexible hose, or both into the table. Operated with Bio Circle L Liquid, the tank in the parts cleaning table uses microorganisms to break down the contaminated cleaning fluid, e.g. from cleaned oil/grease, as specified in the Bio-Chem Surface Technology operating instructions. The used parts and/or brushes to be cleaned for a natural, biological part cleaning are equipped with integrated heater, pump, aeration, filter, and have been regularly maintained. The magnet in the drain strainer retains steel particles. The parts cleaning system is fully functional and in good condition. Ijdefhdnbopfx Ab Ioa Environmental protection through environmentally friendly cleaning. Dimensions of the parts cleaning unit: Parts washer H 1120 x W 900 x D 600 mm, weight 45 kg. Inspection under power is possible by prior appointment. Price / details on request All technical data subject to errors/mistakes. We sell exclusively to European Union countries.

Year of construction: 2005, condition: reconditioned (used), functionality: fully functional, How do you do? We are offering you an OCC sorting system consisting of a PaperSpike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper discharge belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, from the manufacturer Lubo Screening & Recycling Systems B.V.. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes from the PaperSpike and pneumatic cylinders were replaced. All bearings and drive chains were replaced and the motors and gearboxes were checked. Iodpsuanqaofx Ab Ija Viewing is possible by appointment. We accept no liability for the technical specifications or any errors. We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Technical data PaperSpike 2 G: Manufacturer Grumbach und Petermann GmbH Type 2500 Year of construction 2019 Dimensions accelerator belt 3,000 x 2,980 x 600 mm (l x w x h) Weight 1,100 kg Dimensions PaperSpike sorting unit 2,480 x 2,982 x 1,805 mm (l x w x h) Weight 3,100 kg Dimensions PaperSpike 2G complete 5,450 x 3,480 x 1,805 mm (l x w x h) Weight 4,600 kg Dimensions paper discharge conveyor 3,400 x 1,200 x 650 mm (l x w x h) Weight 400 kg Isdpfx Abou Tg Sis Ioa Electrical equipment of the entire system: Voltage 380 - 420 V Connected load 9.5 kW Current consumption 20.34 A Operating principle: The material is fed in as dry and thin a layer as possible, preferably a monolayer, evenly over the entire width on the accelerator belt. The sorting roller with the spikes pulls the mixed paper from the chute, while cardboard boxes are impaled and held by the spikes. Material (paper) with low stiffness (newspapers, magazines, brochures, etc.) is not held by the spikes and falls into a paper bunker or onto a discharge conveyor after the chute. The spiked cardboard boxes are knocked off the sorting roller by the knock-off shaft and then fall onto the cardboard removal belt or into a separate bunker. Throughput capacity: Depending on pre-sorting, the nature of the feed material and machine settings, between 10 and 12 tonnes per line, per hour can be processed. Scope of delivery: 2 pieces PaperSpike 2G incl. 2 geared motors 2 pieces accelerator belt incl. gear motor 2 pieces paper discharge belt incl. gear motor (The cardboard discharge belt is not for sale and is therefore not included in the delivery! There are two lines available for sale. Depending on the customer's request, either one unit or both units together are sold. The sales price always applies to one unit. Comments: The plants are expected to be dismantled by the end of October and will then be ready for loading. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1986, Additional title: 3 coolable tanks Capacity: 205 hl Operating pressure: 0,3 bar Width: approx. 2,80 m Height: approx. 4,20 m Position: Vertical Iodpfsxbql Dex Ab Ioa Base construction: on feet Features: manhole; cooling jackets; spunging apparatus; sampling valve

Condition: like new (used), Year of construction: 2017, functionality: fully functional, load capacity: 8,000 kg, For sale is a Pfeifer turning table that has seen very little use. The machine is somewhat dirty due to long-term storage but is otherwise in very good condition. Gentle – The turning process starts and finishes slowly via frequency converter, ensuring smooth handling and minimizing turnaround time in the middle section through increased speed. Safe – Protection from injury is provided by a solid enclosure or integrated safety edges that automatically stop the turning process in case of a pinch or crush hazard. Acoustic and visual warning signals ensure safety when the turning process begins. Mobile – Thanks to forklift pockets, the turning table can be transported to various locations. A simple 400V power outlet is sufficient to operate the table using the included supply cable. Flexible with various table tops – For coils: table top with a cut-out for easy loading and unloading using a coil hook and prism support. For injection moulding tools: both table tops are without cut-outs. For sensitive loads, the table top or prism is PU-coated. Modular – The INVERTO can be configured as needed thanks to exchangeable and retrofittable table tops. Teach-in function – The turning angle can be individually set and saved. Even more flexibility – 180° rotating unit allows loading and unloading from the same side. Ijdpfx Asxdzuneb Ija

Condition: used, The trustee will sell The AMI Förder – und Lagertechnik GmbH manual sorter consists of, among others, – Three packaging lines, each 30 m long, with roller racks arranged along both sides of each line – A system of pneumatic belt and roller feeders with scanners – Meler Micron 5 – devices with a piston pump for glue application – Multibox type PCX 1816 cardboard folding/packing machine, year of manufacture 2007, machine manufactured in France – 2 pieces – Logopak labeller model 510+ III TB (SN PE00026247), year of manufacture 2018 – APS 10D 10 bar screw compressor (2 pieces) – screw compressors manufactured in 2017 – APX 24 dryer – working pressure (bar) 13, year of manufacture 2009. – Tank Komnino pressure type KP-1000-11/0.8 – year of manufacture 2014, serial number 1569 Iedpfxowaxw Ie Ab Isa – Bizerba – labelling system – Roller conveyor line – line with roller conveyors with 7 storage fields for a maximum of 4 positions per field with an exit to 10 exit ramps The whole thing was dismantled by a professional company and put on pallets - ready for transport.

Condition: good (used), Year of construction: 2011, operating hours: 1,525 h, functionality: fully functional, machine/vehicle number: SP091110K/W09SSA220BLSF8002, fuel: diesel, cubic capacity: 6,600 cm³, stroke length: 127 mm, cutting length (max.): 1,000 mm, cutting width (max.): 700 mm, Equipment: crane, Second splitting cross included (value approx. €15,000) TECHNICAL DETAILS Ijdpfx Abewi H Igo Isa Splitting stroke: up to 1,000 mm Splitting pressure: approx. 80 t Splitting cross: 24-way Hydraulic saw drive: Hultdins Super Cut 100 Saw bar: Oregon Harvester Log diameter: up to 700 mm Log length measurement: available Double cut: available Drive and control system Control system: Siemens PLC Diesel engine: available Displacement: 6,600 cm³ Conveyor and material handling Chain conveyor: approx. 5,000 mm Sorting star conveyor: hydraulically adjustable Chip blower: available Feed table (W x L): 4,000 x 6,000 mm Chain transport including separation: Available Crane Crane: EPSILON M 100 L Use: Fully hydraulic timber loading crane Control: Radio control Chassis Tandem chassis: 18 t / air braked Control valve: 6-way including joysticks MACHINE DETAILS Operating hours: 1,525 h

Year of construction: 1986, condition: good (used), - for forklift trucks 2-8 t - Own weight 1700 t Iodpfx Ajfxxyxjb Iea - Thrust and tractive power 300 t

Condition: new, Year of construction: 2024, Facility managers and property managers know the problem: On the due date, i.e. when the garbage truck empties the garbage cans, all the garbage cans must be at the collection point. If the garbage cans are normally in the underground garage, the caretaker has to janitor has to take all the garbage cans up the ramp of the underground garage. up the ramp. This is time-consuming and exhausting or even impossible impossible. A 240 kg garbage can filled with waste paper can weigh over over 200 kg, a 1100 liter waste container even weighs over a ton. even over a ton. If this is the case, the janitor needs the help of a second person. This is cost-intensive. Weber offers time and health-saving solutions to this problem. problem. Talk to us about our waste garbage can frames for 1100 liter waste containers and our waste garbage can trolleys for 120 and 240 liter garbage cans. By the way, battery-powered towing vehicles are of course also available from us. gentle on health effective 400 kg payload galvanized can be coupled together Professional device - not for public road traffic Adapter: Ball head Trailer hitch Ijdpfx Abji Nnruj Iea

Condition: used, Year of construction: 1997, vertical stainless steel tank with dished bottoms, shell cooling zone, manhole, sampling tap, central outlet. Additional title: pressure tank Volume: 152 hl Operating pressure: 5 bar Operating temperature: 20 °C Isdoxbqlqspfx Ab Iea Width: approx. 2600 mm Height: approx. 4000 mm Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed an 4 square tube feet Features: cooling coil (jacket, 5.1 m², 1 bar, 84 l, glycol), manhole, spout DN65 with hand flap valve, vacuum valve DN32, safety valve DN25, bung glass, sample pipe DN10, CIP pipe DN40 with spray head DN25, level indicator by hose, yeast plug, pressure gauges, crane eyelets, ladder bar

Year of construction: 2014, condition: good (used), Technical data capacitor Volume flow max.: 300m³/h Condenser mass max. in delivery condition: approx. 430mm x1610 mm high Cylindrical part: approx. Ø 273 mm Weight of the chamber in delivery condition: approx. 80 Kg Content upper part (condenser): approx. 30L Content lower part (receiver): approx. 28 L Material elastomers: NBR/FKM/PTFE Temperature condenser max: 1 to 80°C Condenser vacuum max: 0 to 1000 mbar (absolute) Iodpfx Aocpwhbjb Iea (Condenser not suitable for overpressure!!) Temperature exchanger max: 1 to 80°C Medium exchanger: water Water pressure exchanger max: 10bar Exchanger material: CU-tinned Material condenser: stainless steel Technical questions or other sizes on request.

Year of construction: 1987, condition: good (used), - for forklift trucks 1.5 - 4 t Ijdpfx Aofxxy Hjb Iea - Own weight 1400 t - Thrust and tractive power 300 t

Condition: new, Offered is an attachment block broom Kehrfix in different versions from 1.50 m to 4.00 m width. A pick-up must then still be discussed separately if this is desired (e.g. pallet fork pick-up, shovel hook or Euro pick-up). Iodoh T A Tnopfx Ab Isa An attachment block broom for forklifts, wheel loaders, tractors, mini-loaders, mini-dumpers and many other vehicles and equipment! With various attachments for quick mounting on a variety of vehicles, the KehrFix is the perfect aid for keeping larger areas clean. The KehrFix push brooms are a professional choice for easy and effective sweeping and cleaning. The rugged KehrFix is designed to get the job done quickly and thoroughly in every conceivable application. KehrFix push brooms are high-quality, durable, maintenance-free and universally applicable sweeping systems.

Year of construction: 1992, condition: used, Additional title: 6 coolable tanks Capacity: 164 hl Operating pressure: 0 bar Width: approx. 2.05 m Height: approx. 6,2 m Position: Vertical Base construction: On feet Isdpfew Tmqzsx Ab Ija Features: Manhole, 2 cooling zones, sampling valve, security valve with pressure indicator, vacuum breaker

Condition: used, Additional title: in various designs Iodpfx Abew Dy E Uj Iea

Condition: used, Year of construction: 1992, Storage cellar consisting of 8 vertical tanks with temperature control. Additional title: coolable stainless steel tanks Features: 8 storage tanks (6x approx. 165 hl, 2 x approx. 175 hl), temperature control, paneel, blending apparatus Iedpfjvcqthox Ab Ioa

Year of construction: 1988, condition: used, Additional title: stainless steel tanks with temperature control Total capacity (gross): 904 hl Isdpfx Abovcqg Io Ioa Material: stainless steel Features: 3 fermenting tanks (1 x 554 hl, 2 x 175 hl), 1 yeast tank (37 hl) , own temperature control (Nerb)

Condition: used, Year of construction: 1986, Fermentation cellar with 4 coolable stainless steel tanks. Tank 1-3: C. Gresser, 1986, gross volume 204.60 hl. Tanks standing on 4 legs, each with 2 frame cooling zones, dished bottoms and central outlet. Equipment in each case: safety valve, cleaning line, CIP spray head, sampling tap, manhole in the frame and sight glass in the tank dome. Tank 4: C. Gresser, 1986, gross volume 115.69 hl. Tank standing on 4 legs with frame cooling, dished bottom and outlet pipe. Equipment: Cleaning line, CIP spray head, sampling tap, manhole in the frame. Additional title: coolable stainless steel tanks 3 tanks each: 205 hl 1 tank each: 116 hl Material: stainless steel Position: vertical on 4 feet Features: Cooling jackets, cleaning lines, CIP spray heads, discharge lines, safety valves, sampling taps, manholes, sight glasses Iedpfx Abjvcq Dts Ioa

Year of construction: 1991, condition: used, 6 horizontal stainless steel tanks with dished bottoms, side cooling zone, manhole, sampling tap and central outlet. The purchase of a partial quantity is possible. Additional title: stainless steel tanks with temperature control Total capacity: 2429 hl Max. pressure 4 Tanks: 0 bar Max. pressure 2 Tanks: 5 bar Material: stainless steel Position: vertical Base construction: cylindrical tank with dished bottoms, placed on 4 square tube feet Features: 4 storage tanks (approx. 445 hl), 2 pressure tanks (approx. 320 hl), shell manhole, 1 shell cooling zone, insulated with steel metal cladding Iedovcqulepfx Ab Ioa Periphery: own temperature control

Condition: new, Year of construction: 2024, functionality: fully functional, Complete module for supplying two two welding workstations with integrated integrated welding fume extraction system from Teka (welding fume extraction class W3, with automatic automatic filter cleaning) for steel. Mobile product. Small devices (Bosch, Makita or Milwaukee) can be attached to the holder (Fig. 4). Ijdpfx Abouud Ire Isa Alternatively (for an extra charge), extraction systems from Nedermann, Kemper, Denios, Valco, Vaupel, Plymovent and other brands. Fully assembled including 1 frame 2 AGA 2020 extension arms 1 tool cabinet 1 gas cylinder holder 2 power dispensers 2 compressed air dispensers The welding workstation is suitable for TIG, MIG and MAG welding equipment from the companies: Fronius, Clos, Rehm, Migomat, Esab, Lorsch, Ideal, Kemppi and many more! The welding table shown in picture 5&6 can be purchased separately! At the moment we have one returned knife and one used welding workstation (SAP) available. - We look forward to your inquiry!

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Iodpfx Abeu Thbxs Ioa Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.