Used Rinser for sale (125)

Condition: used, Used filling line for beer in cans 25000 cph The used filling line for beer in cans 25000 cph delivers high-speed beer canning across multiple formats. Specifically, it fills 500 ml, 440 ml, and 330 ml cans with standard 202 lids, consistently reaching a capacity of 25,000 cans per hour. Although the line remains installed, it is currently not operational. Nevertheless, all components remain in excellent working condition. Ltedpfew Ahfaox Aansa Empty can feeding system To begin with, a Linker DPG-500 depalletizer, built in 2012, unloads empty cans at the start of the line. Subsequently, rope conveyors from Linker (model RC/KHS, 2012) transport the cans to a Triplexrinser TR/KHS rinser, also from 2012. In this section, the system moves cans smoothly and prepares them efficiently for the next stage. As a result, the line ensures gentle handling while maintaining productivity. Filling and seaming Next, the KHS Innofill DVD 60 filler, installed in 2017, performs the filling process using 60 dedicated valves. In parallel, a Ferrum F08 seamer seals the cans, while an NSM 30A lid feeder supplies lids with precision. Consequently, this configuration ensures accurate dosing and secure sealing at high throughput. Notably, the filling and seaming block is among the most recent upgrades to the line. Pasteurization and quality control After sealing, the product passes through a KHS Innopro KZE flash pasteurizer, installed in 2017. Additionally, this unit includes a 5000-liter buffer tank to stabilize the process. Meanwhile, a KHS Innocheck fill level inspector (2012) continuously monitors the liquid level in each can. In doing so, it guarantees compliance with rigorous quality standards. Therefore, the pasteurization and inspection phases preserve both safety and consistency. Secondary packaging and handle application Once the cans are processed, a KHS Innopack Kisters SP 050 B2 multipack packer (2012) wraps them using shrink film—either printed or transparent. It operates on a double-lane system at 50 cycles per minute. Moreover, a KHS CSM 050-02 handle applicator (2011) applies handles at the same speed, which facilitates later transport. In other words, the secondary packaging setup optimizes the line for retail and logistics needs. Tray packing and shrink wrapping Following multipacking, the line uses a KHS Innopack Kisters TP 035 B2 tray packer (2012) to place packs into trays at 35 cycles per minute. Then, a KHS Innopack Kisters FS-AL shrink wrapper (2017) applies shrink film to stabilize the load. Thus, the packs remain secure and compact throughout distribution. Furthermore, both machines maintain high reliability under continuous operation. Palletizing and end-of-line operations At the end of the line, a KHS Innopal MPH 1-1 palletizer (2012) stacks trays without using interlayers. This simplifies the palletizing process while saving materials. Subsequently, a Fiat MFP pallet wrapper (2017) secures the stacked trays with stretch film.

Condition: used, Non-returnable PET filling line, consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in 4x5 arrangement) - PET shredder (Strautmann BrikPress 240, year of construction 2019) - Crate washer with cleaning nozzles - Preform feeding device - Stretch blow-moulding machine (SIPA, type SFR 8 EVO, with 8 cavities) - Stretch blow-moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Premix system (Procomac Starmix, built in 2001, 200 hl/h) consisting of water deaeration, mixer and carbonisation with a total of 4 tanks and two cartridge filters for water treatment. - Velcorin dosage (dmt, Burdomat II G) - Capping task and cap conveying system - PET bottle rinser, filler and capper (Procomac) - Fill level control (Heuft Spectrum TX) with rejection - Labelling machine (P.E. Futura) for hotmelt labelling of wrap-around labels, in a block with dating (Videojet) - Crate packer (BMS) - Free, driven conveyor lines for bottles and crates Ledpfx Aasw Uvd Tsneta Additional title: non-returnable PET filling Capacity: 16000 bo/h Formats: 0.5 litre disposable PET bottles, 20-bottle crates Features: Bottle ejector, crate washer, shredder, preform feeder, 2 x stretch blow moulder, premixer, velcorindosage, cap feeding and conveying, rinser/filler/capper, fill level control, labeller, dating, packer, Free crate and bottle transport

Condition: used, Year of construction: 1998, Overview This isobaric filler was manufactured in 1998 by the Italian company Cortellazzi (SACMI). The machine is in working condition, regularly maintained by the operator, and has mainly been used for water. It will be sold including format parts and spare parts. Technical data  Capacity: 12,000 bph (operated at ~10,000 bph) Formats: 0.5 L, 1.0 L, 1.5 L PET bottles Filling system: Isobaric, 50 filling valves Rinser: 50 rinser stations Capper: 10 heads Products: Water, flavored water, CSD (minor share) Control: Siemens S7 Additional features: Central lubrication, format parts, spare parts Ljdpfx Aaoxbf R Ujnjta

Condition: excellent (used), functionality: fully functional, Hello, I have for sale a complete wine bottling line. The set includes the following components: · PALLADINI filler with labeller – the bottling machine is equipped with a nitrogen flushing system after filling · ENOLMAC S70/3 banderoling machine · Kaeser compressor · BILEK candle filter · Flowmeter with pump Ltodpfx Aew Rccbeanoa · Rinser · ROVER pump with filter · Two stainless steel tanks: 1100L and 400L · Stainless steel accumulation tables Price: 36,000 EUR (net), VAT invoice. The offer includes installation and commissioning within the country. Outside the country, accommodation for the installers is at the buyer’s expense.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Complete beer canning line for beer (standard 330 and 500 ml can): 10 000 cans per hour (500ml), fully optimized and calibrated. Only 4 machine operators/workers in filling process. The offer includes: Depalletization, rinser, filles, seamer, RTG level inspection, dryer, carton machine, palletization, CIP, flas pasteurization Padovan, HGB,chiller, compressor etc. Ltjdjuq Sb Sspfx Aansa

Condition: used, Used bottling line SPECIJALKA for carbonated beverages 3000bph The SPECIJALKA used bottling line for carbonated beverages at 3000 bottles per hour integrates a rinser, a filler, and a capper. Moreover, this machine fills bottles of various capacities, using both PET and glass. The technical specifications therefore clearly address the needs of technicians and experts in the bottling industry. Lsdpfx Ajvgvdgoaneta Main technical features of the Bottling Line SPECIJALKA The Bottling Line SPECIJALKA operates with 32 filling valves, producing around 2500 bottles per hour for 2.0-liter bottles and up to 3000 bottles per hour for bottles between 0.5 and 1.5 liters. The 28 mm bottle neck works well for both PET and glass. As a result, this versatility allows easy adaptation to different production needs. The capper, which uses 8 heads, simultaneously applies 28 mm plastic caps quickly and precisely. Labeler and saturation system The line uses a linear labeler to apply nylon labels with speed and precision, optimizing the labeling process. Additionally, it includes a saturator/mixer that ensures efficient carbonation, delivering the right amount of CO2 in each product. Furthermore, the combination of these features improves the overall performance of the system. Usage and maintenance status The machine has remained unused, and since 2008, we have kept it overhauled and serviced to maintain its perfect condition. Currently, we store it in a ready-to-use state. The installation of this bottling line requires approximately 200 square meters of space. Thus, this ensures an optimal arrangement of the components. Rinser and filler The rinser  of the Bottling Line SPECIJALKA operates with 20 heads and secures the bottles under the neck to prevent damage during washing. Consequently, this method prepares the bottles for filling. The filler, equipped with 32 valves, fills the bottles quickly and accurately, enhancing production efficiency and reducing product waste. Therefore, this process improves both speed and quality in the bottling operation. Conclusion of the Bottling Line SPECIJALKA The SPECIJALKA used bottling line for carbonated beverages at 3000 bottles per hour offers a complete, versatile solution for high-scale production. It handles both PET and glass bottles while providing an efficient labeling system. In conclusion, it presents an excellent choice for companies aiming to boost production without sacrificing quality. Ultimately, this system increases operational efficiency while maintaining flexibility in production requirements.

Condition: used, Glass bottle filling line consisting of the following components: 1. Bottle washing machine (separate unit, Silmo, 1982) with a nominal capacity of 2,880 bottles/hour 2. Rinsing, filling, capping and labelling line (IC Filling Systems, 2020) with: - Bottle feed table - Rinser - Counterpressure filler - Capping machine - Bottle exterior washer - Cold glue labelling machine - Bottle discharge table - Free bottle transport Capacity appr.: 1100 bo/h referring to 0,33 l bottles Length: appr. 7 m Width: appr. 4 m Formats: Euro 0.5 l and 0.33 l; crown caps; wrap-around labels and belly labels Ltjdpfow Ta Ndsx Aanea Running direction: clockwise Base construction: Rinser, filler and capper as a monobloc Features: Bottle cleaning machine, bottle feeding table, rinser, filler, capper, bottle exterior washer, labeller, bottle discharge table, beer pump

Condition: used, Year of construction: 2023, Overview  This isobaric filling monoblock was manufactured in 2023 by the Italian company Alfatek BP Srl. The machine is a Beer Plus version with an additional 8-head deoxygenation turret before the filler, providing three pre-evacuations for improved filling performance. After the sale, it will be fully overhauled, delivered as good as new, and covered by a 12-month warranty. The machine is available immediately. Technical data  Capacity: 6,000 bph (at 33 cl) Formats: 33 cl, 50 cl, 75 cl (crown cork 26 mm and 29 mm) Execution: 24-head rinser 8-head deoxygenation turret 28-valve isobaric filler 4-head crown capper (Arol) Application: Beer and carbonated beverages (e.g. lemonade, soda) Neck finish: Crown cork 26 mm, crown cork 29 mm Condition: In excellent state, to be delivered fully overhauled and guaranteed Scope of Delivery  Complete monoblock including rinser, deoxygenation turret, isobaric filler, and crown capper Documentation available 12-month warranty after overhaul Lsdpfx Ajw U Si Seanota

Condition: used, Year of construction: 1998, Used Filling Monoblock OCIM 24-32-8 up to 10000 bph The OCIM 24-32-8 filling monoblock stands as a pinnacle in bottling technology. It offers an unparalleled capacity of up to 10000 bottles per hour. Crafted by OCIM in 1998, this machinery embodies reliability and efficiency. Specifically designed to cater to the demands of filling glass containers, particularly those housing oil products. Technical Details At the heart of this monoblock lies its rinser, equipped with 24 grippers meticulously engineered to ensure a secure hold on the containers. Operating with precision, the rinser utilizes compressed air for treatment, guaranteeing optimal cleanliness throughout the filling process. Ljdpevgvufjfx Aansta Moving seamlessly to the filler, which serves as the core component of the monoblock, we encounter a marvel of engineering. Boasting 32 filling valves, this monoblock is capable of handling even the most demanding bottling tasks with ease. Whether employing gravity or a light depression technique, the filler ensures a uniform and efficient distribution of the product, thanks to its fixed nozzle design. Completing the trifecta of functionality is the capper, a critical element in the sealing process. Configured to accommodate aluminum screw caps, the capper features 8 heads operating in harmonious synchronization, rotating clockwise to securely seal each bottle. Current State and Storage Despite its formidable capabilities, the OCIM 24-32-8 filling monoblock currently resides in storage, patiently awaiting its moment to shine. Safeguarded against the ravages of time, it stands as a testament to precision engineering. It is preserved to maintain its integrity and performance. Application and Benefits When deployed, this monoblock transcends mere machinery, becoming the cornerstone of efficient bottling operations. With a capacity of up to 10000 bottles per hour, it revolutionizes production processes. This enables manufacturers to meet the demands of a dynamic market with unparalleled speed and precision. Furthermore, the OCIM 24-32-8 filling monoblock offers tangible benefits beyond its impressive throughput. Its reliability minimizes downtime, ensuring continuous operation and maximizing productivity. Moreover, its versatility allows for seamless adaptation to various bottling requirements, making it a versatile asset in the hands of discerning manufacturers. Conclusion of the Used Filling Monoblock OCIM 24-32-8 up to 10000 bph In conclusion, the Used Filling Monoblock OCIM 24-32-8 represents the epitome of excellence in bottling technology. With its robust construction, innovative features, and unparalleled performance, it stands as a testament to OCIM’s commitment to quality and innovation. Whether in storage or in operation, this monoblock remains a beacon of efficiency, poised to elevate bottling operations to new heights of success.

Condition: used, Year of construction: 2017, Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is applied. Then they go to the combined rinser/filler/sealer, and downstream bottle collection table, from which the bottles are manually packed into crates or other containers. Additional title: Glass bottle filling Ljdjwgi Dxopfx Aansta Nominal capacity approx.: 3750 bottles/h Formats: 0.33 L disposable Euro- and Vichy-bottles Running direction: left -> right Operation / Control: Filler: Siemens ET 200 SP, Touch Panel Position: free standing Features: Bottle loading table, labeling machine from Intrex (model: Intrex Set with all-round adhesive labeling), bottle rinser/filler from Leibinger GmbH (rinser model: 12 BG, filler model: Multima L (=long-tube filler) control: Siemens S7, built in 2019), Bottle collection table, bottle transport

Condition: used, Year of construction: 2005, Overview  This aseptic PET filling line for fruit juices, beverages containing fruit juice and spritzers was built between 2005 and 2006 by the German manufacturer KHS. It is suitable for still and carbonated products (up to 5 g/l CO₂) - also with or without fruit fibers. The line covers all process steps from blowing to filling, labeling, packaging and palletizing and is designed for bottle sizes from 0.5 l to 1.5 l with various closure types. The nominal output is approx. 27,000 bottles per hour at 1.0 l still. The line will be in operation until approx. February/March 2026 and can be inspected by appointment. Technical details  Output: up to 27,000 bph at 1.0 l still Bottle sizes: 0.5 l - 1.5 l PET Products: Still beverages, carbonated up to 5 g/l, with or without fruit fibres Caps / neck finish: 26/22, 38 mm flat cap, sports cap possible Years of manufacture of the main machines: 2005-2006, individual units more recent (e.g. servo capper 2023, labeller 2013, winder 2017) Scope of delivery  Stretch blow molder KHS Blomax 16C (2005-2006), incl. chiller from Riedel Rinser KHS Bottle rinser FR-DR (ACF) 140 28/38 Filler KHS Innofill DNVF-PET ACF 100/15 SV, 100 filling stations, 15 capping stations, servo capper (2023) Nitrogen dropper from VBS, sterile tank, filling management from Eckel & Sohn, cap disinfection KHS Innoclean KR9 (flat cap) and SC4 Twin 28 S 04 (sports cap), cap disinfection KHS Innoclean KR9 (flat cap) and SC4 Twin 28 S 04 (sports cap). VBS, sterile tank, filler management KHS Metec Cap feeder Eckel & Sohn, cap disinfection KHS Innoclean KR9 (Flatcap) and SC4 Twin 28 S 04 (Sportscap) Cleanroom Cleanroom incl. ventilation system Fa. M&W, Zander/Smardt OPK Transport technology Container and air transport KHS, Lanfranchi Inspection Full bottle inspection Heuft Squeezer Labeling Krones Starmodul (YOM 2013) with Contiroll + 2x AutoCol units + dryer Krones Linadry Label inspection unit Heuft FinalView Packaging Tray/Shrink packer KHS Kisters Innopack TSP 050 V TPFO Wrap Around Packer KHS Kisters Innopack 320/70 (BJ 1999) Carry handle applicator KHS Carry Strip Master CSM 050- 2 Palletizing & wrapping Palletizer KHS Innopal Markant 1BSH2-PL + Innopal Markant 1BSH2/1-PL (both year 1999) Wrapper Haloila Octopus 1845S (year 2017, currently at a different location) Ltjdpfxjwzlb Nj Aanja

Condition: used, Year of construction: 1990, Used Overhauled Rinsing Machine The Used Overhauled Rinsing Machine Virmauri rinsing machine, built in 1990 and overhauled, is an industrial machine dedicated to the treatment of glass containers. With an operating capacity of 7000 bottles per hour (BPH), the device implements a system of 28 grippers for the optimization of rinsing processes. Operating clockwise, this unit features movable nozzles, allowing flexibility in specific treatment for each container. Mechanics and Operation Focusing on mechanics, the device adopts a single-step treatment approach, using water as the main cleaning agent. This choice, while simplifying the process, imposes stringent requirements on the quality of the water used and on the maintenance of the nozzles to prevent cross-contamination. The clockwise rotation direction and the arrangement of the sockets have been designed to optimize the workflow and minimize downtime during production batch changes. These technical aspects require careful evaluation when integrating the machine into existing production lines. Current Status and Maintenance of Used Overhauled Rinsing Machine Regarding the current status of Virmauri, the used overhouled rinsing machine is classified “On stock”, indicating immediate availability for installation and use post-overhaul. The Used Overhauled Rinsing Machine has undergone an overhaul process to ensure its functionality and reliability over time. Maintenance management requires a meticulous approach to ensure the availability of spare parts and the technical competence for rapid interventions. Conclusions of Virmauri rinser equipment: In conclusion, the 1990 Virmauri rinser, with 28 grippers and a capacity of 7000 BPH, represents a technologically viable option for companies in the bottling industry that need an efficient and reliable unit for processing glass containers. The decision to acquire a machine of this nature requires a detailed analysis of your production needs, compatibility with existing lines and internal maintenance capabilities, to ensure optimal integration and operation. Ltedpfx Aaevgvwajnsa We can assure full service on this Virmauri equipment with our staff.

Condition: used, Year of construction: 2001, PET filling line from KHS Additional title: with palletising and depalletising Performance at 1 liter: 24000 bottles/h Ltjdjvu Tufspfx Aanja Formats: 0,5 L and 1 L bottles Features: Depalletizer, Air transport, Rinser, Filler incl. height control, Mixer, Packing, Crate washer, Palletizer

Condition: used, Year of construction: 2017, Overview This CraftCan35 can filling machine was manufactured in 2017 by the British company Vigo UK (ABE). The machine has been overhauled, is currently cleaned, dismantled and safely stored and is available for immediate use. It is particularly suitable for small to medium-sized breweries that want to process 330 ml and 440 ml standard cans (202 ends). A viewing can be organized by arrangement. Technical details  Output: up to approx. 35 cans per minute (depending on product) Formats: 330 ml & 440 ml standard cans (202) Filling system: 6-head filler Closure: double seam seamer for 202 ends Voltage / power supply: not specified Special features: Retrofitted rinser and dryer (Vigo UK) Pneumatics converted to metric connections Original operating instructions available Scope of delivery  1 × Can filling line | ABE | CraftCan35 | 2017 Incl. rinser and dryer (retrofitted) Optional: Stainless steel rotary table (pack-out table) and 3 m single-track conveyor belt Some acrylic protective cladding (some replacement required) Lodpfswzb Irjx Aanjta

Condition: used, Year of construction: 2018, Used Rinsing Machine Aesse Service LINE6 year 2018 This machine therefore provides a reliable and robust option for industrial bottling plants. A Esse Service manufactured this model in 2018 to ensure high performance with optimal energy efficiency while maintaining the quality of rinsing processes. Although previously used, the machine has seen very limited operation, which has preserved it in excellent condition. Now in storage, the LINE6 model is designed to handle glass containers with a standard 0.75 L format and operates at a speed of 900 bottles per hour (BPH). Lodpovhcplsfx Aanota Technical Specifications of the Rinsing Machine Aesse Service The Used Rinsing Machine Aesse Service LINE6 year 2018 delivers stable production with a power consumption of 2 kW. In addition, a high voltage (A.T.) of 400 V alternating current ±10% with neutral and ground powers the machine, while a low voltage (B.T.) of 24 V direct current ±10% supplies control circuits. Therefore, the machine supports an operating frequency from 50 to 60 Hz, which adapts well to different industrial standards. Pneumatic System The Machine requires a pneumatic supply of 6 bar and consumes 500 liters per minute to operate effectively. Moreover, this stable airflow supports precise rinsing cycles, which is crucial in bottling lines where flow regularity directly impacts product quality. Furthermore, the airflow consistency ensures reliable performance over time. Dimensions and Weight The compact design of the Used Rinsing Machine Aesse Service LINE6 year 2018 enables easy integration into work environments with limited space. For this reason, the machine measures 1300 x 1300 x 1600 mm (L x W x H), with a dry weight—meaning without liquids or filled conduits—between 300 and 500 kg. Consequently, the moderate weight allows for easy transport and installation, making the LINE6 model practical and versatile for various industrial applications. Container Capacity The Used Rinsing Machine Aesse Service LINE6 year 2018 handles bottles with capacities ranging from a minimum of 0.5 liters to a maximum of 1.5 liters, thereby providing versatile production capabilities. This range, in particular, accommodates rinsing needs for various standard formats used in the beverage industry. Bottle Diameter and Height Additionally, the machine accepts bottles with diameters from 55 mm to 115 mm. Consequently, this flexibility enables it to handle different types of glass containers securely during the rinsing cycle. Also, the machine supports bottle heights between 160 mm and 345 mm, which benefits companies by allowing them to use different formats without frequently changing equipment. Performance and Reliability The rinser provides long-lasting performance thanks to its robust construction and advanced engineering. Moreover, its design reduces routine maintenance, thus ensuring operational continuity essential for industrial bottling lines.

Condition: used, Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type "ML667") - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system) Additional title: hot filling, with pasteurisation Capacity: 5000 bo/h Formats: 0.25 liter bottles, twist off caps Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler Ltedpfxowgc R Ej Aansa

Condition: used, operating hours: 1,800 h, Used Bottling Line for champagne, sparkling and still wine 4000 bph Product Compatibility and Filling Technology This bottling line processes still wine, sparkling wine, and champagne with high efficiency. Specifically, it handles only glass bottles and uses an isobaric filling system, which ensures precise control when filling pressurized liquids, such as sparkling products. As a result, wineries that produce multiple wine types with different physical and chemical properties can rely on this line for consistent, adaptable operation. In other words, the system addresses diverse product demands without compromising output quality. Performance Output by Bottle Format Ljdpfowgw Dgjx Aanota Depending on the bottle format, the line delivers different outputs. It processes both 0.20l and 0,375l bottles at 4,500 bottles per hour. Meanwhile, it handles 0,75l bottles at 4,000 bottles per hour and 1.5l bottles at 2,000 bottles per hour. Therefore, this production speed suits medium-scale wineries that require flexibility while maintaining industrial performance. Commissioning, Runtime, and Immediate Availability Technicians installed the line in 2022. Since that time, it has operated for 1,800 hours and produced approximately 2,400,000 bottles. The system continues to run in production, which means it remains in good operational condition. Furthermore, its immediate availability offers an advantage to wineries needing rapid deployment. Because of this, buyers can integrate the equipment without significant downtime. Primary Bottling Block: Depalletizing, Rinsing, Filling, and Capping The process starts with a Duetti Packaging depalletizer, model M, which automatically feeds empty bottles into the system. Subsequently, the GAI monoblock, model 4033RES-HP-A01, performs rinsing, filling, and capping in a single integrated unit. The dual-stage rinser (water + gas) uses 16 grippers to sanitize bottles. A high-pressure electropneumatic filler with 24 valves carries out isobaric filling. Notably, the 3-head rotary corker applies straight corks, champagne-style mushroom corks, plastic closures, and aluminum screw caps. Moreover, the monoblock includes multi-format screws, motorized guide adjustments, dummy bottles for internal rinser sterilization, and a solenoid valve kit to switch between gas and cleaning liquid inputs. Altogether, this configuration provides high precision, minimal changeover time, and excellent bottle handling. CIP and Quality Control: Cleaning and Inspection Systems To maintain hygiene, the WIN&TECH CIP unit, model Win&Guard C 23.05, manages automatic cleaning via a steam-water heat exchanger and a three-stage filtration system across two independent circuits. Additionally, this system allows operators to sanitize the internal components between production runs without disassembly. At the same time, the CMP inspection unit, model CV-MUF108, performs continuous quality control.

Condition: used, Year of construction: 2009, Used overhauled filling triblock ALFATEK Elvira 16-20-3 year 2009 Ljdpfx Aaevgt H Eoneta Initially, the ALFATEK Elvira 16-20-3 filling triblock, created in 2009, stands as a benchmark of engineering excellence for bottling in glass containers. 1. Model Description and Operational Capability Configured for an impressive throughput of 4,000 bottles per hour (BPH), it specifically targets handling 0.75-liter glass containers. Furthermore, the Filling Triblock Alfatek Elvira integrates three main operational modules: the rinser, the filler, and the capper. Each module is meticulously tailored for a distinct phase of the bottling process, ensuring a streamlined operation. 2. Rinsing Unit of the Filling triblock Alfatek Elvira The Filling Triblock Alfatek Elvira is equipped with 16 grippers, the rinsing system ensures containers are thoroughly cleaned before filling. Consequently, the gripping mechanism is ingeniously designed to handle glass containers with the utmost care, thereby preventing any potential damage. 3. Filling Mechanism Moreover, the filling segment incorporates 20 valves, operating on a high vacuum principle to achieve precise filling. This method not only ensures uniform fill levels across all containers but also allows for efficient dispensing of liquids of varying viscosities, thanks to the selection of fixed nozzles. 4. Capping System Subsequently, the capping unit, fitted with three heads, is adept at applying aluminum screw caps with unparalleled precision. It demonstrates the exceptional versatility of the Filling Triblock Alfatek Elvira in handling various cap types, thus ensuring a consistent secure seal consistently. 5. Safety Measures and Maintenance Protocols Additionally, the Filling Triblock Alfatek Elvira adheres to stringent industrial safety standards, featuring comprehensive protective measures for operator safety. Presently stored under optimal conditions, it is accompanied by a complete set of maintenance manuals. This pivotal aspect is crucial for maintaining the machine’s operational efficiency and extending its longevity. 6. Electrical Specifications and Mechanical Design Requiring an electrical supply of 380 V at 50 Hz is perfectly aligned with standard industrial requirements. Moreover, its clockwise rotational movement is thoughtfully designed for seamless integration into existing production setups, thereby facilitating effortless adoption. 7. Conclusion of the Filling Triblock Alfatek Elvira In conclusion, the ALFATEK Elvira 16-20-3 triblock from 2009 epitomizes advanced engineering, effectively optimizing rinsing, filling, and capping operations in bottling processes. Its technical configuration renders it ideally suited for robust application within the bottling industry, achieving high marks for operational efficiency, precision, and reliability. The meticulous design assures compatibility with a broad range of bottling requirements, securely positioning it as a valuable asset in production environments. Ultimately, the incorporation of transition words aims to enhance the flow and coherence of the analysis, ensuring a comprehensive understanding of the machine’s capabilities.

Condition: used, Year of construction: 2004, Used Filling Monoblock Kompass up to 12000 bph Overview and Condition The Used Filling Monoblock Kompass up to 12000 bph is an integrated bottling system, currently stored in warehouse. This machine, produced by Kompass and model SK24 from 2004, is designed to operate at a speed of 12,000 bottles per hour (BPH). It is ideal for bottling juice in glass containers, with specific formats of 0.237 and 1.0 litres. Rinser: Efficiency and Precision The rinsing system of the Used Monoblock Kompass has 24 clamps. This configuration ensures unique and precise treatment for each bottle. The efficiency of the rinsing process is crucial to ensuring the integrity of the final product. Filler: Advanced Technology Ltjdpfxevgt Uvs Aansa The filler sector is equipped with 24 valves. It uses a gravity and light depression filling method, with fixed type nozzles. This ensures uniform and accurate filling, essential for maintaining the quality of the juice. The filling temperature is maintained at 85 degrees, optimal for juice. Capper: Reliability and Security The capper, configured for crown caps, includes 6 heads. This section of the Used Monoblock Kompass ensures a secure and long-lasting closure of the bottles. The machinery includes advanced safety features, supported by comprehensive maintenance and operation manuals. The direction of rotation is clockwise. Electrical Data and Storage The machine operates at a voltage of 440V and a frequency of 60Hz. Its storage in the warehouse ensures its optimal condition, ready to be put into operation immediately. Conclusion The Used Monoblock Kompass up to 12000 bph represents a technologically advanced solution for the bottling sector. With a capacity of 12000 BPH, it is suitable for medium and large scale production operations, offering efficiency, precision and reliability.

Condition: used, Year of construction: 2007, Used Rinsing Machine ALFATEK up to 3500 bph This Rinsing Machine offers a high-precision solution for the bottling industry. Alfatek manufactured this machine in 2007, and it reaches a speed of 3500 bottles per hour (BPH), making it ideal for medium-sized plants that demand efficiency and reliability. Technical Features of the rinsing Machine Alfatek Firstly, the rinser features 16 gripping clamps for holding bottles, ensuring high stability during the rinsing process. Furthermore, fixed nozzles provide uniform and complete cleaning of glass containers. The machine operates in a clockwise direction and offers adjustable speed, which facilitates easy integration with other equipment in the bottling line, thereby enhancing operational flexibility. Dimensions and Specifications Regarding dimensions, the Used Rinsing Machine ALFATEK up to 3500 bph optimizes its use in industrial spaces. It measures 200 cm in the front, including the conveyor channel and electrical panel, 175 cm in depth, and 200 cm in height. Consequently, these specifications allow the machine to fit into existing plants without requiring significant structural modifications. Formats and Containers Ltedpfxevgvnfs Aanoa Moreover, this machine handles glass containers and supports various bottle formats, including 0.75 L, 1.0 L, and 2 L. Its versatility suits different types of products, such as wines and oils, improving production efficiency by managing multiple formats without frequent equipment changes. Reliability and Maintenance Since 2007, the rinser has demonstrated remarkable reliability. Notably, Alfatek designed the components to be robust and easy to maintain. Operators can quickly access wear parts, thereby allowing for swift interventions that minimize downtime. Integration and Automation In addition, operators can easily integrate the Used Rinsing Machine ALFATEK up to 3500 bph with other machines in the bottling line, thanks to its control and speed adjustment features. The advanced electrical panel provides an intuitive interface, thereby reducing the learning curve and improving overall operational efficiency. Conclusion of the rinsing Machine Alfatek In summary, the Used Rinsing Machine ALFATEK up to 3500 bph offers an excellent solution for bottling plants that need a versatile, reliable machine with high production capabilities. Its technical specifications, compatibility with various bottle formats, and ease of maintenance make it a safe investment for optimizing production processes. Furthermore, its robust design and ease of integration ensure that it meets the demands of modern bottling operations.

Condition: used, Year of construction: 2021, New Filling Monoblock Bertolaso 30/30/4 – PET/Glass up to 6500 bph Notice: Brand NEW Bertolaso monoblock, never used. Zero working hours. Pristine condition. The perfect opportunity to purchase a new monoblock at a used price. This new Bertolaso 30/30/4 monoblock emerges as an advanced technological solution, specifically designed to optimize filling operations for syrups filling system. Manufacturer and Model: Produced by Bertolaso, a benchmark name in the industry, this monoblock stands out for its performance and build quality. The model specification, 30/30/4, combined with its production year, 2021, provides crucial information on its current relevance in the bottling solution landscape. Speed and Capacity: With a speed of 6500 BPH, this filling monoblock Bertolaso can handle both PET and glass containers, ensuring accuracy and consistency in the filling process. Rinser: The rinser is equipped with 30 grippers and offers a single treatment. Filler: With 30 valves and a high vacuum filling system, it guarantees accurate and uniform filling of containers. The mobile nozzle highlights the filling monoblock Bertolaso’s ability to adapt to various operational needs. Capper: The capper of the filling monoblock Bertolaso, with 4 heads, is versatile in handling different types of caps, both aluminum screw and press-on plastic. Its ability to handle caps of various sizes adds further flexibility to the monoblock. Additional Features: Operational safety is ensured by various integrated features. The clockwise rotation direction and the electrical data (V: 380 and Hz: 50) emphasize the attention to technical details. The filling monoblock Bertolaso comes with manuals, which are essential for operators and maintenance technicians. In conclusion, the filling monoblock Bertolaso 30/30/4 monoblock stands as a reference point for industry experts, combining efficiency, safety, and versatility. Its technical specifications speak for themselves, underscoring the importance of choosing technologically advanced solutions in the bottling arena. Lodpfsvgucbox Aaneta   TECHNICAL SPECS Product: syrups Bottles: 700 ml glass Alexanderflasche – Ø 70,1/72,1 x 291 H mm – drawing AZ-01.019.01-03 700 ml Flakon PET – Ø 68,5 x 272,5 H mm – drawing 1304-01-002 1000 ml Flakon PET – Ø 76 x 298,5 H mm – drawing 3041-01-006 1000 ml PET – Ø 74 x 277,4 H mm – drawing 1709-01-003 700 ml glass Wodka – Ø 74,6/57,2 x 304,5 H mm – drawing 2807-02W1C 700 ml Vodka STD – Ø 74,6/57,6 x 304,6 H mm – drawing 2597S087  Maximum bottle diameter: 100 mm Minimum bottle diameter: 52±2 mm Maximum bottle height: 360 mm Minimum bottle height: 180 mm Minimum interior neck diameter: 18,5±0,5 mm (Ø 16 mm filling valve) Closures:      a) pilferproof aluminum screw cap – Ø 28 x H 18 mm on bottle n.

Condition: used, Used Isobaric Complete Bottling Line for Still and Sparkling Wine up to 3500 bph This complete bottling line has been designed and configured to provide a high-quality, consistent filling process for both still and sparkling wines. Built around an isobaric tribloc system, it integrates rinsing, filling, and capping functions in a continuous flow, ensuring excellent efficiency while maintaining product integrity. The line is currently set up for still wines at an output of 3,500 bottles per hour and for sparkling wines at 3,000 bottles per hour. It is already technically prepared for sparkling wine production and only requires the addition of a mushroom corker, a capsule applicator for spumante hoods, and a heating tunnel if needed. The system is equipped with dedicated conveyors, a centralized lubrication system, and separate control panels for conveyor management, enabling straightforward maintenance and integration into existing plant automation. The entire layout follows a linear configuration, optimised for space utilisation and ensuring smooth product transfer between each stage without unnecessary accumulation points. Ltsdpsw Imp Hjfx Aanja Bottling Process and Core Machinery At the start of the line, empty bottles are automatically fed into the system via a depalletizer. This equipment gently lifts and transfers the bottles onto the feeding table while maintaining their integrity. Bottles are then directed to the tribloc system, where three key operations are performed in sequence: rinsing, filling, and capping. The isobaric filling technology ensures precise fill levels and consistent carbonation retention for sparkling wines, while also being perfectly suited for still wine bottling. The filling valves are designed to minimise oxygen pickup, which is crucial for preserving the wine’s sensory qualities and shelf life. The rinser operates with clean water or a sanitising solution, ensuring bottles are free from contaminants prior to filling. The capping turret, currently configured for still wine closures, applies either BVS screw caps or traditional corks, depending on the selected format. A dosing unit for gum arabic is integrated into the line. This system allows for precise addition of stabilising agents post-filling, which helps maintain wine clarity and prevent precipitation during storage. A dedicated steam generator (vapouriser) is included for both line sanitisation and, when required, pre-heating applications. Prior to filling, a microfiltration unit is positioned to ensure that the product entering the tribloc meets the desired microbiological standards. This step is essential for ensuring product stability and quality without the need for excessive chemical preservatives. Downstream, bottles are transferred to the labelling station. While the labelling unit is supplied by a third-party manufacturer, it is electrically integrated into the line and can be configured for multiple label types, including adhesive and cold-glue systems.

Condition: used, Year of construction: 1999, Wine Filling Monoblock Bertolaso UNIBLOC 32/40/8/6 for Still Wine: In this wine filling monoblock with depression system, the bottles enter from left to right. The rinser applies a double treatment and has a mobile nozzle, the filler utilizes slight depression with a centralized level adjustment system. Ltedpfx Aajvguwfsnoa Two cappers belong to this filler: an 8 head aluminium screw capper for sizes Ø 31.5 x 18 and Ø 30 x 60 and one a 6 head straight cork corker. It has an hourly production of 9000 b/h for 0.75 L format in processing on still wine. This Wine Filling Monoblock is very efficient in the production of still wine of any density and characteristic. Its valves are patented by Bertolaso and are very efficient in the production cycle. Accuracy also meets the ease of disassembly of the valves: therefore this means more correct and faster maintenance of the taps. In the case of a sale, we can also offer the option of a completely checked or overhauled machine; this however corresponds to a longer time to deliver the monoblock used for Bertolaso still wine. What is included: Dummy bottles for automatic washing connected to CIP One cork elevator and one aluminium screw caps elevator for two screw cap sizes. The layout of the wine filler machine is angular therefore an adequate arrangement in the wine production line must be studied. The CE protection gives easy access to the operator for maintenance. Click here to see all bottle formats of this automatic wine bottling machine that is currently in storage.

Condition: used, Used Isobaric Complete PET Line for Soft Drinks 6000 bottles/h Ltedpfxsvguyaj Aansa The line consists of: A Kosme KSB 4 L PET blow molding machine from 2004 with a speed of 6800 bottles/h for 0,5L, 6000 bottles/h for 2L, 5200 bottles/h for 2,5L Air conveyor from blowing machine to filler. MAS Mixer from 2004. MAS rinser, filler and capper from 2004, renovated in 2015, capacity 0,5l – 10.000 palack/h, 1,5l – 5000 units, rinser cranes – 32 units, filling valves – 32 units, cork heads – 8 units. BAT forum labeller type EBI 07 year 2006, capacity 1500-6500 units/hour, dimensions 2450x90x950-1300. BAR forum packer year 2005, capacity 12 packages/min. Conveyors, Cyklop International automatic stretch wrapper type GL215 year 2003, turntable 8 mm steel plate resting on 12 supporting rollers, feeder ramp 5 positions possible, power supply 230/440V, three-phase, 50Hz+Neutral; pallet load length/width max. diameter of 1675mm (*2000mm), pallet height – 2200mm (*2600mm), pallet weight max 1500kg (*2000 kg)

Condition: used, Used Filling Line for CSD 12000 bph Line configuration for isobaric filling of carbonated soft drinks The Used Filling Line for CSD 12000 bph fills PET bottles with carbonated soft drinks using isobaric technology. Since the isobaric process maintains pressure during filling, it preserves CO₂ saturation effectively. The system reaches a nominal output of 12,000 bottles per hour for 1.5-liter formats. Furthermore, it uses PCO 28 mm caps and operates on the Euro pallet packaging standard. Overall, the configuration is ideal for medium- to high-output CSD production. High-pressure air supply for the blowing process in the Used Filling Line for CSD 12000 bph  A high-pressure compressor, manufactured by SIAD (model MS3/1442-A3, year 2000), supplies compressed air to the blow molding machine. Specifically, it includes an air dryer and a 2000-liter air receiver to stabilize airflow. As a result, the compressor ensures consistent bottle formation. In addition, the unit supports continuous operation under high load, which is essential for large-scale PET blowing systems. Therefore, this component remains critical to upstream efficiency. Blow molding machine for PET preforms with mold cooling system Ledpfxjwcz Als Aanjta The line includes a Sidel SBO 10 Series 2 blow molding machine (1999), which transforms PET preforms into bottles. Although molds are not included, the machine features a box tipper, a preform feeder, and a SOGEQUIP water cooling system for the molds. Consequently, the setup supports high-speed bottle production. Moreover, the system enables uninterrupted feeding toward the filling block, thereby minimizing downtime. Notably, the machine’s robust construction guarantees long-term reliability. Rinser–filler–capper block with 60 valves and isobaric technology SIDEL Alsim manufactured the central filler block in 2000. It integrates 60 rinsing heads, 60 isobaric filling valves, and a 10-head Alcoa capper. Thanks to this configuration, the system achieves high throughput while maintaining pressure consistency. In particular, the isobaric filler limits CO₂ loss and reduces foaming, which is crucial for CSD bottling. Additionally, it allows quick format changes, making the line adaptable to different production needs. Automated high-capacity mixing system in the Used Filling Line for CSD 12000 bph  The Moravek 240C mixer, installed in 2000, prepares and carbonates the beverage at a flow rate of 24,000 liters per hour. It combines syrup, treated water, and CO₂ in controlled ratios. Importantly, the mixer ensures product consistency before entering the filler. In turn, this reduces process variability. Similarly, its high capacity aligns perfectly with the filler’s speed, avoiding bottlenecks and enhancing line balance. Automated labeling and packaging system The post-filling section consists of a Krones Contiroll labeling machine (2004), which applies wrap-around OPP labels.