Used Robot System for sale (41,971)

Condition: good (used), Year of construction: 2016, overall weight: 10,000 kg, Equipment: documentation/manual, For Sale: - Manufacturer: ABB / Stelram - Brand: ABB / Stelram - Type: 2 robot cells, each with 4 pick and place robots. Total: 8 robots - Vacuum: Becker pumps - Camera system / Vision system Hodpjznd Skjfx Airjw Included: - Power cabinet - Manuals, software, spare parts lists, introduction lists, pneumatic and electrical diagrams - Infeed conveyor - 2 robot cells - 2 camera boxes - Conveyor belts Dimensions, complete with infeed: Length x width x height: 19.50 meters x 2.70 meters x 2.95 meters Transport and dismantling can be provided by us. This large robot cell is suitable for high speeds and larger products. If you have any questions or comments, please feel free to contact us. Sincerely, Leo Holland

Condition: excellent (used), Robots Robot reset and ready for operation, fully connected and prepared for use. Like new SHL grinding system for battery casings Hjdoznkb Sopfx Airsw Industrial robot in a container 2023

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 130 kg, arm reach: 2,194 mm, repeat accuracy: 0.06 mm, spindle speed (max.): 24,000 rpm, number of axes: 6, The system is completely unused. The system consists of: - 2 Stäubli robots with milling heads - 2 tool magazines with automatic tool changers - Control unit - Chip conveyor - Rotary table for pallet loading - Complete enclosure of the working area - Tool carrier pallets TECHNICAL DETAILS Number of axes: 6 Maximum payload: 130 kg Repeatability: ± 0.06 mm Arm Axis 1, working range: 360° Axis 2, working range: 235° Axis 3, working range: 285° Axis 1, max. speed: 160°/s Axis 2, max. speed: 160°/s Axis 3, max. speed: 160°/s Reach: 2,194 mm × 370° Wrist Axis 4, working range: 540° Axis 5, working range: 240° Axis 6, working range: 540° Axis 4, max. speed: 260°/s Axis 5, max. speed: 260°/s Axis 6, max. speed: 400°/s Spindle Type: POWERTECH PT400 Maximum speed: 24,000 rpm Tool holder: Taper ISO30 Weight: 24 kg Maximum power: 13 kW Torque: 10.4 Nm MACHINE DETAILS Operating temperature range: 0–45°C Ambient humidity: 20–80% rH Hsdpfx Aioxt Nzberew Weight: 980 kg Note regarding sale: The system was intended for milling roof racks. However, a change of shareholder for the user occurred during delivery. The new shareholder did not take over the system. Further details on the equipment can be found in the attached documentation.

Condition: new, Year of construction: 2022, Manufacturer: RBC Robotics GmbH Type: Automation Brose oKMV Year of manufacture: 2022 Machine no.: 20380 Length: approx. 20,000 mm Width: approx. 1,500 mm Height: approx. 3,000 mm Number of robots: 5 Power supply: 3 × 400 V + N + PE / 60 Hz Power: 57 kW Max. fuse: 100 A Control voltage: 24 V DC Mains system: TN-S Max. short circuit current: 10 kA Pneumatic operating pressure: 6 bar Weight: 25 t Equipment: Production part collection and transfer stations KUKA industrial robots: Manufacturer: KUKA Series: CYBERTECH-2 Model: KR 16 R2010-2 / SEL Hjdpfx Aezuy Ibjirow Number of robots: 5 Year of production: 2022 Number of axes: 6 Payload: 16 kg Reach: 2013 mm Weight: 296 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a state-of-the-art CNC-controlled waterjet center consisting of 2 machines Machine 1: Robot with processing cell and integrated SERVO turning table. Machine 2: Robot with 2 processing cells and 2 integrated SERVO turning tables. This waterjet center is ideal for companies looking for a flexible and efficient solution for demanding cutting tasks. They are characterized by high precision, flexibility and reliability. - Robot arm NJ-16-3.1 Foundry: The robot has a load capacity of 16 kg and a working radius of 3100 mm. It is particularly robust and flexible, equipped with an IP65 protection class and is flange-mounted directly behind the cell. - SERVO turning table: With a maximum load of 500 kg and a faceplate center width of 2800 mm, the interpolating turning table offers maximum precision and repeatability. - Processing cell: The processing cell measures 2350 x 4500 mm and is equipped with sound insulation. - High-speed roller shutter: Integrated into the cell wall, the high-speed roller shutter ensures safe access and complies with Machinery Directive 2006/42/EC. Hsdjua U Tzjpfx Airsw - SL-VI 30 Plus high-pressure pump: This pump achieves a pressure of up to 4136 bar, ideal for precise cutting processes. - Water cutting head: The water cutting head is a central component of the system and offers maximum precision. It is equipped with a high-pressure line feed, a manual change system for quick replacement. Additional features: - CNC control: Siemens 840D controller with integrated PROFINET for controlling the robot and integrated S7 319 safety technology. - Cyclone separator: Efficient system for particle separation - Programming options: The robot is programmed using simulation software, machining takes place in the CAM system and the programs are transferred via G-code. Main features Rotary table cells: - Robot arm NJ-16-3.1 Foundry: This robot has a load capacity of 16 kg and a working radius of 3100 mm. With an IP65 protection class, it offers a high level of robustness and flexibility. - SERVO rotary tables: The system is equipped with two SERVO rotary tables, each with a load capacity of 500 kg. These rotary tables enable precise machining of large workpieces with a maximum component size of 1000 x 1000 x 1000 mm. The repeat accuracy is ±0.15 mm with a rotation of 180° in just 5 seconds. - Machining cell: The machining cells each have a size of 2350 x 4250 mm. - 2 high-speed roller shutters: Integrated into the front wall of each cell, the cold-resistant and antistatic high-speed roller doors ensure safe access to the processing cell. The waterjet center offers outstanding processing flexibility and is suitable for various industrial PUR waterjet applications. Price on request or guide price < €300,000 Contact: For more information or to arrange a viewing appointment, please contact us on the telephone number provided.

Year of construction: 2018, condition: used, - Robot axes: 6 Hjdpfjzuz Icsx Airew - Reach: 4683 mm - Payload: 1700 kg Industrial robot with conveyor system and safety fence Manufacturer: Fanuc Type: M-2000iA/1700L Year of manufacture: 2018 Technical data - Robot axes: 6 - Reach: 4683 mm - Payload: 1700 kg Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: good (used), We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet Hjdpexby Sgofx Airsw If you have any questions, please do not hesitate to contact us!

Year of construction: 2024, condition: new, The OASI.S (Open Automation Systems Integrator Server) robotic material handling system for the automatic loading and unloading of IV bags and trays. This system is designed to transport filled IV bags from the cleanroom, load and position IV bags into trays using a pick-and-place robot, stack trays on a pallet, and move pallets of empty trays to and from cells. The system consists of connecting conveyors, a clean station with a delta robot, a robotic loading station (delta robot and 4-axis robot), and an unloading station (2 x 4-axis robots). The line includes: - 3 x FANUC M-410iC/315 robots, serial numbers: R24500486, R24500487, R24500488, manufactured in 2024 - FANUC M-3iA/6S delta robot, serial number R244001FB, manufactured in 2024 Hjdpfx Ajzx Aldeirjw - FANUC M-2iA/3SL delta robot, serial number R2430075E, manufactured in 2024 The individual robot cells are equipped with dedicated grippers, four Buuusch MM 1104 B V03 TNXX pumps, conveyor feeders, additional electrical cabinets, and many other accessories.

Condition: used, Sturm Coating Coating System For sale is a complete industrial Sturm robotic painting system manufactured in 2019. This automated coating system was used for series production coating of components and comes from an industrial production facility. The used painting line includes, among other things, a painting booth, drying and cooling zones, conveying technology, and several KUKA and Yaskawa industrial robots. The system is complemented by a thermal exhaust air purification system. Due to the automated system design, the robotic painting system is particularly suitable for industrial applications in the automotive industry, metal processing, and series production. Technical data & scope of supply: Manufacturer: Sturm (system) / KUKA & Yaskawa (robots) Year of manufacture (main system): 2019 Previous operation: 3-shift operation (condition appropriate for age) System components: Units, drying and cooling zone, painting booth, loading and unloading station Included robots / peripherals: Several spare KUKA robots (models KR 210L 150-2 / KR 210 2, years of manufacture 2006–2012) Associated robot control cabinets 2x Yaskawa robots EPX 2900 1x Thermal post-treatment / exhaust air purification system (VeniaKab / RNV) Condition notes: Control technology: According to the in-house maintenance department, it is at the state of the art. Electrical & mechanical: Mostly in a condition appropriate for age or good condition. Hsdpfx Aiezka Sfsrow Cybersecurity data deletion: For security reasons, all hard drives of the robots and PC-based stations have been removed. "Everything from one source: We will gladly offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: repair required (used), Year of construction: 1998, Max. tool size: 1,600 x 1,300 x 1,700 mm Max. table load: 17 tons Hsdpfx Aiszkigrjrew Clamping force: 1500 kN Opening force: 750 kN Drive power: 25 kW Machine weight: approx. 30 tons

Condition: like new (used), functionality: fully functional, machine/vehicle number: C-13-309, overall weight: 900 kg, Take the opportunity to acquire a high-quality used Carat grinding and polishing station: This set consists of a control cabinet and two precise polishing machines, equipped with robotic interface for maximum efficiency. Ideal for professional industrial applications. Suitable robots can be offered separately. • Year of manufacture: 05/2013 Hsdeuzylhepfx Airew • Total height: 240 cm • Operating pressure / max. air pressure: 6 bar • Operating voltage / frequency: 400 V / 50 Hz • Rated current: 11.5 A • Rated power: 5.5 kW Scope of delivery: 3 pallets with 2 polishing machines & 1 control cabinet

Condition: used, We are selling a used robotic grinding and polishing system. The system is in good used condition. The system includes: Hedpfoxlufvsx Airjw - 1x YASKAWA MH20 industrial robot with NX100 controller - 2x belt grinding machines for grinding belts with a circumference of 3,500 mm - 2x polishing machines with oscillation and feed for polishing discs with a maximum diameter of 500 mm - 1x loading table for pallets with dimensions (LxW): 1,200 x 600 mm - 1x control cabinet If you have any questions, please do not hesitate to contact us!

Condition: used, Year of construction: 2002, Cloos – Robotic welding system with 2 robots and a swivel positioner for MIG welding with a TEKA smoke extraction system. Robot type: ROMAT 310 Number of axes: 6 Payload: 10 kg Repeatability: ± 0.1 mm Working range (spherical): approx. Ø 4100 mm Control system: ROTROL II (one programming handheld device is defective) Mechanical torch cleaning: CMR Welding power source: GLC 353 Quinto Profi Wire feed unit: CK 78 A/R Wire feed system: DUO – DRIVE Connecting hose package: 3.5 m Welding torch: MRW 3802 Welding torch holder: with integrated collision protection Two-station workpiece positioner: HWR-3KDP 5.000 Load on the rotary table, one-sided: 5000 N Load on the rotary table, two-sided: 3000 N Torque for station change: 2900 Nm Torque for rotary table: 800 Nm Diameter of rotary table: 400 mm Clamping length: 4000 mm Max. speed of rotary table: 60° / sec Smoke extraction system: TEKA cartridge filter system / Type TK-ZPF-4-40-DP with extraction hood 2300 x 4800 mm Year of manufacture of the system: 2002 Certificates of conformity are available. Hedpfozrux Ajx Airjw

Condition: used, Bosch Type: XR31-3 Description: Delta pick and place robot Manufacturer: Bosch Product type: Sigpack Systems XR31-3 Designation: Delta pick and place Year of manufacture: 2008 Pads/cycle (min): 185 Max. acceleration (g): 0.455 Cycle time (s): 0.32 Working area (mm): 48 x 9.2 Maintenance rate: None Assembly time (h): 2.5 Hedpjzdrzrsfx Airsw Scope of supply: 1 x Delta robot XR 31-3 Manz operating panel pendant P51 1 x Rotary gripper Condition: used (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 2008, functionality: fully functional, Used robotic grinding and polishing system Hjdpjyxpmksfx Airow Comprising: 1x Yaskawa robot MH165 Payload: 165 kg 1x Belt grinding machine 1x Polishing machine 1x Double sliding table 1x Control cabinet

Condition: new, Year of construction: 2024, functionality: fully functional, -Yaskawa GP50 robot with YRC1000 Controller -Laserline LDF6000-60 power unit; •Maximum continuous wave power output 6000W • Emitted light wavelength range 900-1070nm • Air to water with 6kW cooling capacity cooling with the help of cooler • 600μm in diameter and 20m in length optical fiber • Annular slit laser coating nozzle water-cooled working optics OTZ-5 • COAX-8 type. The optics specified has a zoom mechanism. • Focus point from 2.28 mm to 7.32 Allows continuous change to mm • CMOS attached to optics for process monitoring camera • Water-cooled side panel that can be installed on OTZ-5 coating nozzle -PF2/2 Power Feeder; •Electronic control • Remote control with robot controller • 2 chambers with a capacity of 5 liters • Heater -Slider; • For Y-axis movement of the robot group Hjdpfxjrwwzyo Airjw Provides linear movement suitable for the process. • 1x Yaskawa Servo Motor, • 1 x Linear (6m), Rack and Pinion • Automatically by the carrier robot will be checked -Two Axis Positioner; • Max. 5,000 kg carrying capacity, • Rotation Axis Servo with Yaskawa Robot and Synchronous motion, • Tilt Axis Servo Motor index control • Movement Range of Tilt Axis +/- 90°, • Rotation Axis Movement Range +/-360° • Max. Product diameter 800mmand max. Product weight is 8 tons. • Positioner as single axis support and hydraulic tailstock when used with carrying capacity max. 8 tone • Positioner can be used as two axes If desired, the carrying capacity is max. 3 is the tone -5T Tailstock; • Max. 5,000 kg carrying capacity • Hydraulic -Two Axis Positioner 5T Support; • 4 m long for cylinder supports a rail base • 1 5 ton roller support • Different sizes from 200 mm to 800 mm Suitable and adjustable for diameters. • Maximum Load 5,000 kg

Condition: used, Welding cell with 6-axis industrial robot YASKAWA - MOTOMAN - YASNAC Robotic welding system with 2 welding stations, welding robot type YASNAC ERC Serial No. S24174-1-4 Year of manufacture: 1993 2 welding stations (right + left) Working area per side: approx. 600 x 400 mm Table size per side: approx. 1000 x 950 mm Table surface with one working station (without center wall): approx. 2000 x 950 mm - Table size for fixture exchange plate for welding gauge: 300 x 600 mm - Connection cable robot to control cabinet: 5,000 mm - Free-standing control cabinet with teach-in control panel (approx. 300 kg) - Control cabinet: ENCM-RP692 - Operator control unit: YZNC-OP186 - Teach pendant: JZNC-T834B - Robot: YRFL-NNA06WB - Automation by ECKHARDT, type ROBO Robot payload: 6 kg Robot weight: 180 kg The entire system is designed as a compact welding cell. Robot control cabinet is free-standing. The robot can, of course, also be equipped with a MIG-MAG welding power source. Space requirements (welding cell with robot): L x W x H 2000 x 2000 x 2300 mm Weight (welding cell with robot): 1055 kg Space requirements (controller with control cabinet): L x W x H 1000 x 850 x 1600 mm Weight (controller with control cabinet): 300 kg Hodpewypqljfx Airow Total system footprint (L x W): approx. 3000 x 3000 mm Total system weight: approx. 1355 kg Good condition Transport dimensions (L x W x H): 3000 x 2200 x 2300 mm

Condition: good (used), Keyence RB-1200 3D Bin-Picking Robot Vision System with Camera Unit and Controller Manufacturer: Keyence Model: RB-1200 Type: 3D Bin-Picking Vision System for Robots System: Industrial image processing system for automatic part recognition Camera Unit: Keyence RB-1200 Vision Sensor Components: Camera unit, vision controller, mounting frame with four sensor modules Hsdpjz Dlaljfx Airow Function: 3D detection and position determination of unordered parts in containers Application: Automated picking and removal of parts by industrial robots Connections: Industrial communication interfaces on the controller Scope of delivery: Camera unit, controller, sensor mounting frame, connection cables Condition: Good Location: Fulda

Condition: used, TOX Type: TZ-VSN TOX – Full-Punch Riveting System The full-punch rivet initially separates all joining partners and then pushes the punched-out section out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, is expanding its range of products and services to include a future-oriented process. Full-punch riveting offers an additional mechanical sheet metal connection that is of great importance for lightweight construction and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed to be so universal that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand tongs and TOX robot tongs. Hodpfx Aiezdtffjrsw Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Connection values Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, A robot-assisted CLOOS welding system is offered. 1) CLOOS robotic welding system, wire feed speed: 30m/min, steel wire spool weight: 15kg, aluminum wire spool weight: 4kg, welding power source dimensions X/Y/Z: 1245mm/470mm/930mm, welding power source weight: approx. 190kg, wire feeder dimensions: 680mm/410mm/235mm, wire feeder weight: approx. 24kg. 2) CLOOS ROMAT 310 welding robot, payload: approx. 10kg, max. reach: approx. 1540mm, max. workpiece weight: approx. 3500kg, control system: CLOOS ROTROL II-D. 3) CLOOS WPV-DP-10000 N workpiece positioner, quantity: 2. 4) CLOOS GLC 503 Quinto welding power sources, quantity: 2. 5) CLOOS main electrical cabinet. 6) Welding fume extraction system. Including safety fence and peripheral equipment. Inspection possible by prior arrangement. Hodpfxozli Ace Airew

Condition: used, KUKA Hjdsy Dt D Depfx Airow Type: KR 10 R900 sixx / KRC4 KUKA industrial robot complete system Robot: KR 10 R900 sixx Controller: KRC4 including KUKA smartPAD, cable set and accessories For sale is a KUKA industrial robot as a complete system from a commercial inventory. The system is ideally suited for automation tasks in industry, laboratories, assembly, handling, pick-and-place applications, testing tasks, and general robot applications. The 6-axis robot is designed for precise and rapid movements and can be used for gripping, positioning, feeding, moving, and processing components. The system offered consists of a robot arm, KRC4 controller, smartPAD, cables, and other accessories as shown in the pictures. Technical data: Manufacturer: KUKA Roboter GmbH Robot type: KR 10 R900 sixx Article No.: 10016515 Serial number: 500874 Payload: 10 kg Reach: 901 mm Axes: 6 Robot weight: 52 kg Controller: KRC4 Article No.: 11019802 Serial number: 224377 Controller weight: 33 kg Controller connection voltage: 1 x 230 V Mains frequency: 50/60 Hz Full load current: 12 A Mains fuse: 16 A Total system weight (approx.): 90–110 kg Robot dimensions (approx.): Reach 901 mm Controller dimensions (approx.): compact KRC4 design Software / Display according to system: KRC SR version: V8.2.3 HMI version: 8.2.0.4 B22 Base system: KSS 8.2.21_SR Installed options according to display: ExpertTech 3.1.1 Gripper-&-SpotTech 3.0.5 OrangeApps.MqttClient 2.2.12 Profinet KRC-Nexxt 2.2.7 RemoteService 1.0.2 UserTech 3.1.4 Description / Functions: The robot can be used for handling and automation processes, e.g. for gripping, transferring, feeding, positioning or processing workpieces. The 6 axes enable flexible movement in space. The compact design and the reach of 901 mm make the system particularly interesting for confined working areas and automated production cells. Total system weight (including controller and accessories, approx.): 90 – 110 kg Condition: used visually with typical signs of wear the screen and system information can be seen in the photos the visual condition can be seen in the pictures Scope of delivery: (See picture) KUKA KR 10 R900 sixx robot arm KUKA KRC4 controller KUKA smartPAD Connection and linking cables other accessories as shown in the pictures Important: The images are the only basis for the scope of delivery. "The table shown in the photos is not part of the sale." Commercial sale (Changes and errors in the technical data, information are subject to change!) We are happy to answer any further questions you may have by phone.

Condition: used, Fanuc Type: M-420I A A05B-1040-B201 / R-J3IB A05B-2474-B250 Fanuc robot with control unit Fanuc robot M-420I A The M-420iA series is the latest generation of FANUC Robotics' high-speed family of industrial robots. Based on a simple and reliable design, the M-420iA offers sophisticated motion control and consistent performance with high productivity. The series is supported by an intelligent robot controller. The M-420iA is a four-axis, servo-driven, modular robot designed for high-speed packaging and material handling. M-420iA - 4 axes of motion, 40 kg payload. Programming teach pendant Large work envelope with a horizontal reach of 1855 mm Repeatability of +/- 0.5 mm at full speed and full payload throughout the entire work envelope. Linear motion speeds up to 4200 mm/s. Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) Hedpezdit Tofx Airew We will gladly answer any further questions you may have over the phone.

Year of construction: 2006, condition: ready for operation (used), A complete Severt robotic welding system is available. Travel path X: 8000mm, robot axes: 6, stations: 2, axis positioners: 2, positioner speed: 6rpm, positioner load capacity: 1000kg, faceplate torque: 1000Nm, power source: OTC DP 500, power output: 350A. Including seam tracking sensor, push-pull torch, hose packages, wire guide spirals, contact tips, gas nozzles and additional items. Documentation vorhanden. On-site inspection is possible. Hodpex U Dxasfx Airsw

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, arm reach: 3,900 mm, conveyor belt length: 8,000 mm, conveyor belt width: 600 mm, product height (max.): 2,600 mm, No reserve price – guaranteed sale to the highest bidder! The machine's original price in 2021 was EUR 1,480,000 (net)! TECHNICAL DETAILS Performance and Capacity Processing capacity: 60 pallets per day Boxes per pallet: up to 54 units Maximum box weight with 54 boxes: 15 kg Overall height from top of pallet: 2,500 mm Maximum total height (including pallet): 2,600 mm Maximum total load: up to 500 kg Hedpfx Ajxu Upmeirew Process Times Stacking time per box: 12–15 s Wrapping time: approx. 30 s AGV cycle time (incl. pallet change, wrapping, labeling, transport): about 4 min Transport and Material Flow AGV travel distance: approx. 70 m Number of pallet change positions: 6 Available positions during pallet change: 5 Robot Industrial robot: 6-axis articulated arm robot Payload: 120 kg Reach: 3,900 mm Availability: 99.9 % Protection class (robot): IP64 Robot control: KUKA, protection class IP54 Robot pedestal: height 1,500 mm Safety and Control Technology PLC: Siemens S7-1500 with MP 277 Touch Panel, 19" industrial PC panel Central safety control: with decentralized I/O modulation Profinet slave card: for PLC communication Safety light curtains: 1× A 1,500 mm with muting (3 for robot cell, 1 for door, 1 for wooden pallet stacking) Conveyor Technology and Pallet Handling Powered pallet conveyor: length 4 m, width 1,200 mm Pallet transfer station: GoPal E24/W for docking station Pallet station power unit: GoPal 400 / E24/W Pallet detection kit: included AGV System Transport unit: autonomous AGV GoBot GoPal E24/W Server: GoControl Operating unit: GoPal operating unit (1× call button) Interfaces: GoPal AUX Interface Box (I/O) Integration: fully integrated into AGV system Conveying Technology and Singulation Box conveying line: 17 m long, 600 mm wide Horizontal robot transfer section: 1 m Belt conveyor for boxes (new line): 8 m long, 600 mm wide Singulation system: pneumatic pusher Singulation stopper: included Pallet Stacking Systems Automatic pallet stacking system for Euro pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar Automatic pallet stacking system for wooden pallets: capacity 13 pallets, manufacturer e.g. Palomat or similar MACHINE DETAILS System footprint: 5.6 m² (base area) Connected load: 38 kW Weight: 3,500 kg Note: Further information on the equipment configuration can be found in the attached specification sheet.

Condition: used, Techman Hodpfx Ajzg Eyaeirow Type: Techman Robot TM5-900 The TM5-900 is equipped with an integrated image analysis system, which gives it the ability to "see," allowing it to handle assembly automation and inspection tasks with maximum flexibility. It works in collaboration with humans, sharing the same tasks without compromising productivity or safety. It offers the highest level of precision and efficiency while operating in the same workspace. The TM5-900 is the ideal cobot for the electronics, automotive, and food industries. Payload: 4 kg Reach: 946 mm Weight: 22.6 kg Perfect for Industry 4.0 Highest flexibility and adaptability Extremely low costs for automation and maintenance The TM5-900 is a true plug & play solution. Connect a monitor, mouse, and keyboard to the control unit, and the TM5-900 will be ready for use in just a few steps. Scope of delivery: Techman Robot TM5-900 Control unit, connection cable Operating device 2 calibration plates for the camera system 1 landmark Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have over the phone.