Used Belt System for sale (45,302)

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. Bledpfsyb Rpdsx Aktsp The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: used, Year of construction: 2025, Used glass belt grinding machine, SCV System, Model BELT 3350D, Year 2025. Bedpfx Ajz H I Sijktslp

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels Bedpfx Aozlh Ausktslp aluminum and steel sheets various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 69,000 mm, total width: 16,000 mm, total height: 16,000 mm, The system was designed according to Eurocode EN 1993 for the industrial drying of wood chips, sawdust, or similar biomass products and is suitable for use in biomass, wood, or pellet production. Process components: Bljdpezw Apgefx Aktjp Air heater, deflection rollers, feed modules, discharge modules, trough chain conveyor, belt tensioning and adjustment device, 7 exhaust stacks (height up to approx. 17.6 m) Designed for hot air or waste heat utilization (e.g., biomass boiler or CHP plant), heat requirement 10,270 kW th, installed electrical power 690 kW el. The inlet temperature in the dryer is 68°C, the outlet temperature is 42°C, and the heat transfer medium is a water/glycol mixture. The volume flow at the dryer outlet is 1,081,000 m³/h. Dust emission value 5 mg/Nm³ (moist), sound pressure at a distance of 1 m 85 dB(A) from the opening of the exhaust duct and the dryer. The dryer is designed for an outside temperature down to -40°C, the conveying capacity is at least 70 m³/h and a maximum of 250 m³/h with a bulk density of 260 kg/m³. The working platform of the dryer is located on approximately 8.00 m high steel supports and is enclosed with thermally insulating sandwich panels. A hall or other production components can be inserted under and between the supports (see under Documents, Steel Structure). The system has been disassembled and stored by an experienced assembly team, and this team can be arranged for transport and reassembly. Please note: We are selling exclusively this belt dryer and no other parts! Please direct your inquiries via WhatsApp to Mr. Sörgel; he is on-site at the factory and may not always be available by phone. Thank you very much!

Condition: used, Band filter system, coolant treatment system, coolant filter AME - AMADA type PS 100 Gravity-fed paper band filter Manufacturer's number 12918, year of manufacture 2017 Filter capacity for emulsion: approx. 100 l/min. Filter capacity for oil: approx. 70 l/min. Tank capacity: max. 300 liters Width of the filter fleece roll: 710 mm Overall height of the filtration unit: 560 mm Bledpfx Ake Agw Egotjp Submersible pump motor power: 0.24 kW Submersible pump flow rate: 100 l/min. Submersible pump pressure: 0.7 bar Power connection: 400 Volt, 50 Hz. - Submersible pump BRINKMANN, type TB 100 - Tank with 3 float switches - Sight glass for fill level - Filter fleece roll housed in a box with a lid - Float switch for filter fleece chain drive - Contamination collection container for filter fleece - Can be moved with a pallet truck, both longitudinally and transversely Space requirement: L x W x H 1700 x 920 x 1100 mm Weight: 230 kg Very good condition Application: Compact filter for coolant, equipped with a roll of filter fleece for cleaning coolants in machining operations. Self-contained cleaning unit, also in combination with chip conveyors, e.g. on machining centers, or as a local filter for several machine tools. Also suitable for grinding machines. Function: Dirty liquid flows into the filter basin and, after passing through the filter fleece and support belt, flows into the clean tank. The retained dirt particles build up a filter cake and increase the flow resistance – the level rises. When a defined height is reached (via a float switch), the band drive is activated, bringing clean filter fleece onto the filter surface. The flow rate increases, and the level of the dirty liquid decreases again. The contaminated fleece ends up in a dirt and sludge container.

Condition: good (used), Paper band filter with abundant nonwoven fabric SEITZ, type PFA 200 Bedps Afpyxjfx Aktjlp

Condition: used, Assembly machine / production line The device was previously used to assemble and press together upper and lower parts. Blodpfxoglp Uyo Aktep Components include: - Kuka Scara KRC2sr robot, manufactured in 2010 - Pneumatic control system - Electrical control system with frequency inverter - 4 conveyor belts Description of robot type KR 5 scara R350: Working space volume KR 5 scara R550-Z320: 0.264 m3 Repeatability (ISO 9283) KR 5 scara R350: ±0.015 mm Reference point of working space: intersection of axes 3 and 4 Weight approx. 20 kg Robot data sheet Control system data sheet You can find more new and used items in our shop! International shipping costs available upon request! Item condition: used

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, Carton sealer, packaging machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, carton sealer type T-55 -Carton width: max. 550 mm -Overall dimensions: 1100/800/1750 mm -Weight: 150 kg This additional information is standard for this model. Please always double-check the details during a visit. The Soco System T-55 Cartoning Machine is a state-of-the-art packaging solution designed for efficient and high-speed cartoning of various products. With its advanced technology and robust construction, the T-55 is ideal for industries requiring precise and reliable cartoning, such as food, pharmaceuticals, cosmetics, and consumer goods. Featuring a compact and ergonomic design, the T-55 maximizes floor space utilization while ensuring easy operation and maintenance. Its modular construction allows for flexibility in configuration, enabling seamless integration into existing production lines and adaptation to changing packaging requirements. The T-55 Cartoning Machine offers versatile carton handling capabilities, accommodating a wide range of carton sizes and styles, including straight-line, reverse-tuck, and glue-sealed cartons. It utilizes advanced automation and servo-driven mechanisms to ensure accurate carton forming, product loading, and sealing, minimizing downtime and enhancing productivity. Bsdpszhv Rljfx Aktslp Equipped with intuitive controls and a user-friendly interface, the T-55 provides operators with easy access to machine settings and diagnostics, facilitating quick setup and changeover between different carton formats. Additionally, the machine incorporates safety features to protect operators and prevent damage to products during operation. Overall, the Soco System T-55 Cartoning Machine is a reliable and efficient packaging solution that meets the demanding requirements of modern production environments, delivering consistent performance and high-quality cartoning results.

Year of construction: 2023, condition: ready for operation (used), A new belt roasting machine for nuts in the food industry is available. Fuel: diesel/electricity/gas/LPG, output: 2kW, machine dimensions X/Y/Z: approx. 3600mm/1900mm/1950mm, operating hours: 31h. Roasting capacity per hour: hazelnut kernels: 160kg, shelled peanuts: 150kg, shelled peanuts: 35kg, shelled pistachios: 90kg, sunflower seeds: 70kg, pumpkin seeds: 70kg, almonds: 120kg, cashew nuts: 150kg, chickpeas: 120kg. Including salt kettle with a capacity of 35kg and fully automatic high-pressure belt washer. Documentation available. On-site inspection is possible. Bledpeu Ei Utefx Aktjp

Condition: used, Belt Filter, Pressure Filter, Emulsion Filter, Sludge Filter, Lubricant Filter, Emulsion Filter, Used Machine Manufacturer: Faudi Dimensions: 2460 x 1660 x 1270 mm Belt size: 2200 x 1270 mm Active filtering surface: 1400 x 1200 mm Capacity : 1200 l/m The Klappbandfilter is used for cleaning contaminated cooling and lubricating fluids in the metalworking field, as well as for processing various sludge waste during rough machining, especially aluminum, or for handling abrasive grinding sludge. When the cooling and lubricating fluids and grinding sludge are cleaned, they can be reused in the process for longer periods, significantly contributing to environmental protection. Additional benefits include heat dissipation at the machining site and optimization of the workpieces' surface quality. The Klappbandfilter is versatile and can also be used independently. Its modular design allows it to be optimally adapted to various conditions. The FAUDI design allows for the buildup and removal of filter cakes up to 15 cm thick. With the extra-high filter cake, the separation performance of the filter is further increased. Filter areas of 1, 1.5, and 2.5 m² per filter are possible. Filter fineness: Up to 10 µm Medium/Fluids: Oils and machining emulsions Bedpfxey Uc Uaj Aktelp Filter auxiliaries: Optionally with or without filter auxiliaries

Year of construction: 2023, condition: used, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Bjdpfxozy Ulxe Aktolp The machines are still assembled but disconnected from the power supply. An 11-ton forklift is available on-site for loading. For sale is a belt tensioning system from the manufacturer Humboldt, model: HU600.

Year of construction: 2018, condition: used, - Robot axes: 6 - Reach: 4683 mm - Payload: 1700 kg Industrial robot with conveyor system and safety fence Manufacturer: Fanuc Type: M-2000iA/1700L Year of manufacture: 2018 Technical data - Robot axes: 6 - Reach: 4683 mm - Payload: 1700 kg Bsdpfx Ajzuz Icektjlp Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, functionality: fully functional, -WAG 917- Offered here is a trough-type shot blasting machine from the manufacturer Wheelabrator, model T85. The machine is used and fully functional. Bjdpfjzktvqjx Aktelp Manufacturer: Wheelabrator Model: T85 Machine number: 6610246 Overall width: approx. 2300 mm Conveyor belt width: approx. 750 mm Overall height: approx. 3250 mm Overall depth: approx. 2100 mm Year of manufacture: 1996 The machine is dismantled and cannot be tested under power on-site.

Year of construction: 2024, condition: new, functionality: fully functional, The copper wire granulator can recycle waste copper wire into separated copper and plastic, the process capacity is 100-180 kg/h, the dry physical crushing method does not produce pollution. The granulator is sold with a pre-shredder and a conveyor belt with magnet! Design and manufacture 99.99% excellent efficiency and reliability, advanced technology: ● Airflow gravity sorting system to discharge the copper particles from the insulation. ● Strong vibration separator to separate the weight of the copper granules from the insulation ● Self-cleaning dust collection system to reduce maintenance time and remove dust. ● The machine is compact and takes up little space ● 99.99 % copper purity recovery rate ● High reliability ● High productivity ● Robust and versatile ● Long service life ● Cost-effective Technical specifications Model GRS 180KG Bedpfeu Tq S Hex Aktjlp Current voltage 380V Power output 8,7 kW Frequency 50 Hz Processing capacity 100-180 kg/h Size of machine 80*137*204CM Net weight 518 kg

Condition: used, Kübrich   Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench   Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt Blsdpfx Akozhkb Sstjp (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box   Intended use: The test bench is used for carrying out tests on belt starter generators during development.   Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (short-term, less than 1 s) Control voltage 24 V   Mechanical performance data according to the data sheet of the load machine A gear ratio of 1:2 to the test specimen shaft must be considered. Speeds: Load machine: Manual operation: 0 - 50 rpm Automatic operation: min Test specimen motor: Manual operation: 0 - 0 rpm Automatic operation: 0 - rpm   Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm   Weight: approx. 1.2 t   Condition: used   Scope of delivery: (See Figure)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: good (used), Year of construction: 1996, Reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Handover: in its current condition as inspected -Condition: without drive motor, without control unit, see photos -Manufacturer: Cisam Impianti, FEEDER belt feeding system -Type: 1000/2B -Passage: 395 mm -Transmission: Ratio 68.37:1, max. 251 Nm Bljdpsitdikofx Aktjp -Pneumatic cylinder contact force: 1.6 tons -Individual components: see photos -Dimensions: 1340/920/H1690 mm -Weight: 829 kg

Condition: good (used), Year of construction: 2018, Load capacity: 3000 kg Height: 345 mm Width: 390 mm Depth: 120 mm Weight: 9 kg (without packaging) Bjdpfx Asy Dct Uektolp Condition: good, second-hand

Condition: as good as new (ex-display), Year of construction: 2023, total length: 3,400 mm, total width: 1,300 mm, total height: 820 mm, overall weight: 565 kg, power: 2.2 kW (2.99 HP), input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO CB 3000 Conveyor Belt is a robust, 3-meter transport solution for construction, recycling, horticulture, and industrial applications. Perfect for moving sand, soil, gravel, compost, and other bulk materials, it delivers reliable, efficient, and continuous material handling. This particular unit was used only for demonstration purposes, showcasing its functionality and excellent condition. Key Features: Blodpfow N Imiox Aktop • Adjustable belt speed, angle, and length for versatile use • Modular and extendable design for longer transport distances • Integrated hour counter for maintenance tracking • Simple belt tension and height adjustment • Durable, low-maintenance build for continuous operation Tech Highlights: Speed 10 - 135 cm/s · Capacity 20 - 120 m³/h · Belt width 0.6 m · Hopper length 0.8 - 1.6 m · Hopper capacity 0.2 - 0.5 m³ · Drive power 400 V / 2.2 kW · Weight 565 kg · Width 1.3 m · Length 3.4 m · Height 0.82 m

Condition: good (used), Dimensions: Length: 12,500 mm Bledpfx Ajh Rmrnjktjp Width: 350 mm Multiple units in stock.

Condition: good (used), Folding machine, folding machine, form folding machine, profiling machine, profiling system, slat production, blind production, roller feeder, reel, unwind reel, motorized reel for sheet metal processing, motor reel, unwind reel, sheet metal unwinder, strip feeder, strip feeder for eccentric press, hydraulic press -Profiling system: Roller insertion with cooling water/hot water device, from slat/blind manufacturing -Sealing heads: maier type DX 215 L / DX 215 R -Rollers: Ø 120 x 220 mm -Drive: 1.1 kW -Individual components: see photos -Drive shaft: Ø 35mm -Dimensions: 1120/405/1310 mm -Weight: 312 kg Bjdpspwnf Nsfx Aktjlp

Condition: excellent (used), Length: 25000 mm Width: 82 mm Blsdpfxsh Rmths Aktsp

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Bsdpfx Akozvp Uyetslp

Condition: used, 6600 mm Rexroth conveyor system Conveyor system with its own drive for transporting work piece carriers in the longitudinal direction or for transferring the work piece carrier transversely between parallel conveyor systems in conjunction with a lifting and cross-transfer unit for transferring from a longitudinal system to a transverse system and vice versa. Manufacturer: Bosch Rexroth Voltage: 3 x 400 V 50 Hz (16 A) Control voltage: 24 VDC Conveyor medium: Toothed belt Bedpfxexzgg Do Aktslp Belt section: 6600 x 500 mm Lifting and cross-transfer unit: 500 x 430 mm Belt height: 990 mm You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, Magnetic conveyor belt, magnetic sliding conveyor, DGS System GmbH Z-conveyor, sliding belt system, conveyor belt, magnetic belt conveyor Type No.: MBF 326P31.75 Item No.: 44489-10 Year of manufacture: 2017 Belt width 300 mm Distance between permanent magnets 250 mm Insertion length approx. 3400 mm (up to the modular frame) Insertion length approx. 3900 mm (without the modular frame) Insertion height 210 mm Insertion width housing 370 mm Insertion width threaded inserts for adjustable feet 410 mm Insertion width at the modular frame 470 mm Conveying height – discharge height approx. 1040 mm Conveying speed approx. 2 meters/min. Motor power belt drive 0.37 kW Mains connection 400 volts, 50 Hz - Continuous chain equipped with permanent magnets Bodpfx Aksi Huzxjtolp Space requirement L x W x H 5200 x 700 x 1500 mm Weight 410 kg Very good condition

Condition: excellent (used), Several pieces in stock. Bodpsh Rmt Nefx Aktelp Size: 12,500 mm to 13,200 mm Width: 82 mm